mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-09 04:15:47 +00:00
qualcommax: add support for Aliyun AP8220
Aliyun AP8220 is an AP manufactured by Edgecore.
(Very similar to Edgecore EAP102)
Hardware specifications:
SoC: Qualcomm IPQ8071A
RAM: 1GB of DDR4 600MHz
Flash1: MX25U3235F 4MB
Flash2: MX30UF1G18AC 128MB
Ethernet: 2x 2.5G RJ45 port
USB: 2x USB-A 2.0 port
WiFi1: QCN5024 2.4GHz
WiFi2: QCN5054 5GHz
Power: DC 12V / PoE
Flash instructions:
1. Connect the router via serial port
2. Keep pressing @ until uboot is interrupted
3. Download the initramfs image, rename it to
initramfs.bin, host it with tftp server
4. Run these commands:
tftpboot initramfs.bin
bootm
5. After openwrt boots up, use scp or luci
to upload sysupgrade.bin to upgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/17970
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Chukun Pan
Robert Marko
parent
b6fa124bdf
commit
51d485ef31
@ -26,6 +26,12 @@ ubootenv_add_mmc() {
|
||||
}
|
||||
|
||||
case "$board" in
|
||||
aliyun,ap8220|\
|
||||
compex,wpq873|\
|
||||
edgecore,eap102|\
|
||||
zyxel,nbg7815)
|
||||
ubootenv_add_mtd "0:appsblenv" "0x0" "0x10000" "0x10000"
|
||||
;;
|
||||
dynalink,dl-wrx36|\
|
||||
netgear,rax120v2|\
|
||||
netgear,sxr80|\
|
||||
@ -37,11 +43,6 @@ tplink,eap620hd-v1|\
|
||||
tplink,eap660hd-v1)
|
||||
ubootenv_add_mtd "0:appsblenv" "0x0" "0x40000" "0x20000"
|
||||
;;
|
||||
compex,wpq873|\
|
||||
edgecore,eap102|\
|
||||
zyxel,nbg7815)
|
||||
ubootenv_add_mtd "0:appsblenv" "0x0" "0x10000" "0x10000"
|
||||
;;
|
||||
edimax,cax1800)
|
||||
ubootenv_add_mtd "0:appsblenv" "0x0" "0x10000" "0x20000"
|
||||
;;
|
||||
|
||||
@ -28,6 +28,7 @@ endef
|
||||
|
||||
ALLWIFIBOARDS:= \
|
||||
8devices_mango \
|
||||
aliyun_ap8220 \
|
||||
arcadyan_aw1000 \
|
||||
asus_rt-ax89x \
|
||||
buffalo_wxr-5950ax12 \
|
||||
@ -166,6 +167,7 @@ endef
|
||||
# board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
|
||||
|
||||
$(eval $(call generate-ipq-wifi-package,8devices_mango,8devices Mango))
|
||||
$(eval $(call generate-ipq-wifi-package,aliyun_ap8220,Aliyun AP8220))
|
||||
$(eval $(call generate-ipq-wifi-package,arcadyan_aw1000,Arcadyan AW1000))
|
||||
$(eval $(call generate-ipq-wifi-package,asus_rt-ax89x,Asus RT-AX89X))
|
||||
$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
|
||||
|
||||
@ -0,0 +1,337 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq8074.dtsi"
|
||||
#include "ipq8074-ac-cpu.dtsi"
|
||||
#include "ipq8074-ess.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "Aliyun AP8220";
|
||||
compatible = "aliyun,ap8220", "qcom,ipq8074";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart5;
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs-append = " root=/dev/ubiblock0_1";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&tlmm 66 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WLAN_2GHZ;
|
||||
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WLAN_5GHZ;
|
||||
gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
bluetooth {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_BLUETOOTH;
|
||||
gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
ble-power {
|
||||
gpio-export,name = "ble_power";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
mdio_pins: mdio-pins {
|
||||
mdc {
|
||||
pins = "gpio68";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio {
|
||||
pins = "gpio69";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button-pins {
|
||||
mux {
|
||||
pins = "gpio66";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_spi1 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "0:sbl1";
|
||||
reg = <0x0 0x50000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "0:mibib";
|
||||
reg = <0x50000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
label = "0:qsee";
|
||||
reg = <0x60000 0x180000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1e0000 {
|
||||
label = "0:devcfg";
|
||||
reg = <0x1e0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f0000 {
|
||||
label = "0:apdp";
|
||||
reg = <0x1f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "0:rpm";
|
||||
reg = <0x200000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@240000 {
|
||||
label = "0:cdt";
|
||||
reg = <0x240000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@250000 {
|
||||
label = "0:appsblenv";
|
||||
reg = <0x250000 0x10000>;
|
||||
};
|
||||
|
||||
partition@260000 {
|
||||
label = "0:appsbl";
|
||||
reg = <0x260000 0xa0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@300000 {
|
||||
label = "0:art";
|
||||
reg = <0x300000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@340000 {
|
||||
label = "0:ethphyfw";
|
||||
reg = <0x340000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3c0000 {
|
||||
label = "product_info";
|
||||
reg = <0x3c0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3d0000 {
|
||||
label = "mtdoops";
|
||||
reg = <0x3d0000 0x20000>;
|
||||
};
|
||||
|
||||
partition@3f0000 {
|
||||
label = "priv_data1";
|
||||
reg = <0x3f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&prng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qusb_phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssphy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "rootfs1";
|
||||
reg = <0x0000000 0x3000000>;
|
||||
};
|
||||
|
||||
partition@3000000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3000000 0x3000000>;
|
||||
};
|
||||
|
||||
partition@6000000 {
|
||||
label = "usrdata";
|
||||
reg = <0x6000000 0x2000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
qca8081_24: ethernet-phy@24 {
|
||||
compatible = "ethernet-phy-id004d.d101";
|
||||
reg = <24>;
|
||||
reset-deassert-us = <10000>;
|
||||
reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
qca8081_28: ethernet-phy@28 {
|
||||
compatible = "ethernet-phy-id004d.d101";
|
||||
reg = <28>;
|
||||
reset-deassert-us = <10000>;
|
||||
reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
switch_lan_bmp = <ESS_PORT5>;
|
||||
switch_wan_bmp = <ESS_PORT6>;
|
||||
switch_mac_mode1 = <MAC_MODE_SGMII_PLUS>;
|
||||
switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>;
|
||||
|
||||
qcom,port_phyinfo {
|
||||
port@5 {
|
||||
port_id = <5>;
|
||||
phy_address = <24>;
|
||||
port_mac_sel = "QGMAC_PORT";
|
||||
};
|
||||
port@6 {
|
||||
port_id = <6>;
|
||||
phy_address = <28>;
|
||||
port_mac_sel = "QGMAC_PORT";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&edma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dp5 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&qca8081_24>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
&dp6 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8081_28>;
|
||||
label = "lan";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
|
||||
qcom,ath11k-calibration-variant = "Aliyun-AP8220";
|
||||
};
|
||||
@ -33,6 +33,19 @@ define Build/wax6xx-netgear-tar
|
||||
rm -rf $@.tmp
|
||||
endef
|
||||
|
||||
define Device/aliyun_ap8220
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Aliyun
|
||||
DEVICE_MODEL := AP8220
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@ac02
|
||||
SOC := ipq8071
|
||||
DEVICE_PACKAGES := ipq-wifi-aliyun_ap8220
|
||||
endef
|
||||
TARGET_DEVICES += aliyun_ap8220
|
||||
|
||||
define Device/arcadyan_aw1000
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
|
||||
@ -11,6 +11,12 @@ ipq807x_setup_interfaces()
|
||||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
aliyun,ap8220|\
|
||||
edgecore,eap102|\
|
||||
yuncore,ax880|\
|
||||
zte,mf269)
|
||||
ucidef_set_interfaces_lan_wan "lan" "wan"
|
||||
;;
|
||||
asus,rt-ax89x)
|
||||
ucidef_set_interfaces_lan_wan "10g-sfp 10g-copper lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8" "wan"
|
||||
;;
|
||||
@ -37,11 +43,6 @@ ipq807x_setup_interfaces()
|
||||
xiaomi,ax3600)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
|
||||
;;
|
||||
edgecore,eap102|\
|
||||
yuncore,ax880|\
|
||||
zte,mf269)
|
||||
ucidef_set_interfaces_lan_wan "lan" "wan"
|
||||
;;
|
||||
edimax,cax1800)
|
||||
ucidef_set_interfaces_lan_wan "lan"
|
||||
;;
|
||||
@ -83,6 +84,11 @@ ipq807x_setup_macs()
|
||||
local label_mac=""
|
||||
|
||||
case "$board" in
|
||||
aliyun,ap8220)
|
||||
wan_mac=$(mtd_get_mac_text product_info 0x4b)
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
label_mac="$wan_mac"
|
||||
;;
|
||||
linksys,mx4200v2|\
|
||||
linksys,mx4300)
|
||||
label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
||||
|
||||
@ -9,6 +9,13 @@ board=$(board_name)
|
||||
case "$FIRMWARE" in
|
||||
"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
|
||||
case "$board" in
|
||||
aliyun,ap8220)
|
||||
caldata_extract "0:art" 0x1000 0x20000
|
||||
addr=$(mtd_get_mac_text product_info 0x4b)
|
||||
ath11k_patch_mac $addr 0
|
||||
ath11k_patch_mac $(macaddr_add $addr 8) 1
|
||||
ath11k_set_macflag
|
||||
;;
|
||||
asus,rt-ax89x)
|
||||
CI_UBIPART="UBI_DEV"
|
||||
caldata_extract_ubi "Factory" 0x1000 0x20000
|
||||
|
||||
@ -166,6 +166,15 @@ platform_pre_upgrade() {
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
aliyun,ap8220)
|
||||
active="$(fw_printenv -n active)"
|
||||
if [ "$active" -eq "1" ]; then
|
||||
CI_UBIPART="rootfs1"
|
||||
else
|
||||
CI_UBIPART="rootfs2"
|
||||
fi
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
arcadyan,aw1000|\
|
||||
cmcc,rm2-6|\
|
||||
compex,wpq873|\
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user