ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-29 18:19:02 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

mediatek: add support for Routerich AX3000

Browse Source 
This PR is continuation of work under "mediatek: add support for Routerich
AX3000" #13703 by the agreement with PR #13703 original author (Maximilian
Weinmann <x1@disroot.org>). All reviews from the previous PR were taken
into into account.

Routerich AX3000 is a wireless WiFi 6 router.

Specification
-------------
- SoC       : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3 GHz
- RAM       : DDR3 256 MiB (ESMT M15T2G16128A)
- Flash     : SPI-NAND 128 MiB (ESMT F50L1G41LB)
- WLAN      : MediaTek MT7976CN dual-band WiFi 6
  - 2.4 GHz : b/g/n/ax, MIMO 2x2
  - 5 GHz   : a/n/ac/ax, MIMO 2x2
- Ethernet  : 10/100/1000 Mbps x4 (MediaTek MT7531AE)
- USB       : 1x 2.0
- UART      : through-hole on PCB
  - [J500] GND, TX, RX, 3.3V (115200n8)
- Buttons   : Mesh, Reset
- LEDs      : 1x Power (Blue)
              1x WiFi 2.4 GHz (Blue)
              1x WiFi 5 GHz (Red)
              1x Mesh (Blue)
              3x LAN activity (Blue)
              1x WAN activity (Blue)
              2x WAN no-internet (Red)
- Power     : 12 VDC, 1.5 A

Installation
------------
Flash OpenWrt 'sysupgrade.bin' image using stock firmware web-interface
(without keeping settings).

Return to stock
---------------
Install stock firmware image (without keeping settings) using OpenWrt
sysupgrade method.

Recovery
--------
Connect uart, use u-boot menu to flash stock firmware image or boot
OpenWrt initramfs image.

MAC addresses
-------------
+---------+-------------------+-----------+
|         | MAC               | Algorithm |
+---------+-------------------+-----------+
| WAN     | 24:0f:5e:xx:xx:b4 | label     |
| LAN     | 24:0f:5e:xx:xx:b5 | label+1   |
| WLAN 2g | 24:0f:5e:xx:xx:b6 | label+2   |
| WLAN 5g | 24:0f:5e:xx:xx:b7 | label+3   |
+---------+-------------------+-----------+
The WLAN 2g MAC was found in 'Factory', 0x4

Co-authored-by: Maximilian Weinmann <x1@disroot.org>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
(cherry picked from commit 485adc9d3c)
[Fix merge conflict in uboot-envtools]
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
This commit is contained in:
Mikhail Zhilkin 2023-12-09 17:17:02 +00:00 committed by Hauke Mehrtens
parent 18d7962f7b
commit 51881b2eb9
6 changed files with 360 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
package/boot/uboot-envtools/files/mediatek_filogic
View File

@ -61,7 +61,8 @@ glinet,gl-mt6000)
local envdev=$(find_mmc_part "u-boot-env")
ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
;;
mercusys,mr90x-v1)
mercusys,mr90x-v1|\
routerich,ax3000)
local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
;;

337
target/linux/mediatek/dts/mt7981b-routerich-ax3000.dts Normal file
View File

@ -0,0 +1,337 @@
// SPDX-License-Identifier: GPL-2.0-only OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "mt7981.dtsi"
/ {
model = "Routerich AX3000";
compatible = "routerich,ax3000", "mediatek,mt7981";
aliases {
label-mac-device = &wan;
led-boot = &led_power_blue;
led-failsafe = &led_power_blue;
led-running = &led_power_blue;
led-upgrade = &led_power_blue;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
button-0 {
label = "mesh";
linux,input-type = <EV_SW>;
linux,code = <BTN_0>;
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
button-1 {
label = "reset";
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led-0 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_WLAN;
function-enumerator = <50>;
gpios = <&pio 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
led-1 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_WAN;
gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
};
led_power_blue: led-2 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_POWER;
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
};
led-3 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
};
led-4 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
};
led-5 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_LAN;
function-enumerator = <3>;
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
};
led-6 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WAN;
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
};
led-7 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
function-enumerator = <24>;
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led-8 {
color = <LED_COLOR_ID_BLUE>;
/* LED_FUNCTION_MESH isn't implemented yet */
function = "mesh";
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
};
};
memory {
reg = <0 0x40000000 0 0x10000000>;
};
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_factory_4 (-1)>;
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
&mdio_bus {
switch: switch@1f {
compatible = "mediatek,mt7531";
reg = <0x1f>;
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
/* ESMT F50L1G41LB (128M) */
spi_nand@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-buswidth = <4>;
spi-rx-buswidth = <4>;
spi-cal-enable;
spi-cal-mode = "read-data";
spi-cal-datalen = <7>;
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>;
spi-cal-addrlen = <5>;
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0_all {
label = "spi0.0";
reg = <0x0 0x8000000>;
read-only;
};
partition@0 {
label = "BL2";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "Factory";
reg = <0x180000 0x200000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
macaddr_factory_4: macaddr@4 {
compatible = "mac-base";
reg = <0x4 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@380000 {
label = "FIP";
reg = <0x380000 0x200000>;
read-only;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0x4000000>;
};
partition@4580000 {
label = "firmware_backup";
reg = <0x4580000 0x2000000>;
read-only;
};
partition@6580000 {
label = "zrsave";
reg = <0x6580000 0x100000>;
read-only;
};
partition@6680000 {
label = "config2";
reg = <0x6680000 0x100000>;
read-only;
};
};
};
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
wan: port@4 {
reg = <4>;
label = "wan";
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_factory_4 (-2)>;
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
&pio {
spi0_flash_pins: spi0-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&uart0 {
status = "okay";
};
&usb_phy {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
status = "okay";
nvmem-cell-names = "eeprom";
nvmem-cells = <&eeprom_factory_0>;
};
&xhci {
status = "okay";
mediatek,u3p-dis-msk = <0x1>;
};

7
target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
View File

@ -26,6 +26,13 @@ netgear,wax220)
ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
;;
routerich,ax3000)
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
ucidef_set_led_netdev "lan-3" "lan-3" "blue:lan-3" "lan3" "link tx rx"
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
ucidef_set_led_netdev "wan-off" "wan-off" "red:wan" "wan" "link"
;;
xiaomi,mi-router-wr30u-112m-nmbm|\
xiaomi,mi-router-wr30u-stock|\
xiaomi,mi-router-wr30u-ubootmod)

3
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
View File

@ -29,7 +29,8 @@ mediatek_setup_interfaces()
confiabits,mt7981|\
cudy,wr3000-v1|\
jcg,q30-pro|\
qihoo,360t7)
qihoo,360t7|\
routerich,ax3000)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
;;
cmcc,rax3000m|\

1
target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
View File

@ -95,6 +95,7 @@ case "$board" in
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
;;
routerich,ax3000|\
zbtlink,zbt-z8102ax|\
zyxel,ex5601-t0)
addr=$(mtd_get_mac_binary "Factory" 0x4)

11
target/linux/mediatek/image/filogic.mk
View File

@ -600,6 +600,17 @@ define Device/qihoo_360t7
endef
TARGET_DEVICES += qihoo_360t7
define Device/routerich_ax3000
DEVICE_VENDOR := Routerich
DEVICE_MODEL := AX3000
DEVICE_DTS := mt7981b-routerich-ax3000
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
endef
TARGET_DEVICES += routerich_ax3000
define Device/tplink_tl-xdr-common
DEVICE_VENDOR := TP-Link
DEVICE_DTS_DIR := ../dts