apm821xx: remove overlapping partitions

Apart from the dtb partition, these were all "read-only;"
they serve no purpose other than being a copy of what
netgear had defined in their original firmware.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
Christian Lamparter 2021-12-23 21:45:19 +01:00
parent 832b9cbd74
commit 4e6ebdd7ce

View File

@ -177,24 +177,13 @@
nand {
nand-is-boot-medium;
partition0,0@0 {
label = "NAND 128MiB 3,3V 8-bit";
reg = <0x00000000 0x08000000>;
read-only;
};
partition0,1@0 {
partition@0 {
label = "uboot";
reg = <0x00000000 0x00180000>;
read-only;
};
partition0,2@180000 {
label = "device-tree";
reg = <0x00180000 0x00020000>;
};
partition0,3@180000 {
partition@180000 {
label = "kernel";
reg = <0x00180000 0x00380000>;
/*
@ -208,52 +197,54 @@
*/
};
partition0,4@500000 {
partition@500000 {
label = "ubi";
reg = <0x00500000 0x014e0000>;
};
partition0,5@19e0000 {
/*
* Netgear's u-boot in the fw_recovery mode (can be
* triggered by holding the reset button, or if
* "bootm" fails) will not flash past this point
* (= 0x19E0000).
*/
partition@19e0000 {
label = "config";
reg = <0x019e0000 0x00080000>;
read-only;
};
partition0,6@1a60000 {
partition@1a60000 {
label = "pot";
reg = <0x01a60000 0x00080000>;
read-only;
};
partition0,7@1ae0000 {
partition@1ae0000 {
label = "traffic_meter";
reg = <0x01ae0000 0x00300000>;
read-only;
};
partition0,8@1de0000 {
partition@1de0000 {
label = "language";
reg = <0x01de0000 0x001c0000>;
read-only;
};
partition0,9@1fa0000 {
partition@1fa0000 {
label = "ecos";
reg = <0x01fa0000 0x06020000>;
read-only;
};
partition0,10@7fc0000 {
partition@7fc0000 {
label = "wifi_data";
reg = <0x07fc0000 0x00040000>;
read-only;
};
partition0,11@180000 {
label = "firmware";
reg = <0x00180000 0x01860000>;
read-only;
};
};
};
};