mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
ar71xx: add ew-balin platform from Embedded Wireless
Add the Embedded Wireless "Balin" platform SoC: QCA AR9344 or AR9350 RAM: DDR2-RAM 64MBytes Flash: SPI-NOR 16MBytes WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n Ethernet: 3 x 10/100 Mb/s USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up PCI-Express: 1 x lane PCIe 1.2 UART: 1 x Normal, 1 x High-Speed JTAG: 1 x EJTAG GPIO: 10 x Input/Output multiplexed The module comes already with the current vanilla OpenWrt firmware. To update, use "sysupgrade" image directly in vendor firmware. Signed-off-by: Catrinel Catrinescu <cc@80211.de>
This commit is contained in:
parent
ad4232e3e9
commit
4ba2dd130a
@ -372,6 +372,12 @@ ar71xx_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
|
||||
;;
|
||||
ew-balin)
|
||||
# usb0 is RNDIS interface over USB in device mode
|
||||
ucidef_set_interface_raw "usb2" "usb0" "static"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "5:lan:4" "4:lan:5" "3:wan"
|
||||
;;
|
||||
ew-dorin)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan" "2:lan" "3:wan"
|
||||
|
@ -199,6 +199,9 @@ get_status_led() {
|
||||
el-mini)
|
||||
status_led="easylink:green:system"
|
||||
;;
|
||||
ew-balin)
|
||||
status_led="balin:green:status"
|
||||
;;
|
||||
ew-dorin|\
|
||||
ew-dorin-router)
|
||||
status_led="dorin:green:status"
|
||||
|
@ -643,6 +643,9 @@ ar71xx_board_detect() {
|
||||
*"EL-MINI")
|
||||
name="el-mini"
|
||||
;;
|
||||
*"EmbWir-Balin")
|
||||
name="ew-balin"
|
||||
;;
|
||||
*"EmbWir-Dorin")
|
||||
name="ew-dorin"
|
||||
;;
|
||||
|
@ -237,6 +237,7 @@ platform_check_image() {
|
||||
epg5000|\
|
||||
esr1750|\
|
||||
esr900|\
|
||||
ew-balin|\
|
||||
ew-dorin|\
|
||||
ew-dorin-router|\
|
||||
gl-ar150|\
|
||||
|
@ -108,6 +108,7 @@ CONFIG_ATH79=y
|
||||
# CONFIG_ATH79_MACH_EPG5000 is not set
|
||||
# CONFIG_ATH79_MACH_ESR1750 is not set
|
||||
# CONFIG_ATH79_MACH_ESR900 is not set
|
||||
# CONFIG_ATH79_MACH_EW_BALIN is not set
|
||||
# CONFIG_ATH79_MACH_EW_DORIN is not set
|
||||
# CONFIG_ATH79_MACH_F9K1115V2 is not set
|
||||
# CONFIG_ATH79_MACH_FRITZ300E is not set
|
||||
|
@ -106,6 +106,7 @@ CONFIG_ATH79=y
|
||||
# CONFIG_ATH79_MACH_EPG5000 is not set
|
||||
# CONFIG_ATH79_MACH_ESR1750 is not set
|
||||
# CONFIG_ATH79_MACH_ESR900 is not set
|
||||
# CONFIG_ATH79_MACH_EW_BALIN is not set
|
||||
# CONFIG_ATH79_MACH_EW_DORIN is not set
|
||||
# CONFIG_ATH79_MACH_F9K1115V2 is not set
|
||||
# CONFIG_ATH79_MACH_FRITZ300E is not set
|
||||
|
@ -711,6 +711,17 @@ config ATH79_MACH_ESR900
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_NVRAM
|
||||
|
||||
config ATH79_MACH_EW_BALIN
|
||||
bool "embedded wireless Balin Platform support"
|
||||
select SOC_AR934X
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
|
||||
config ATH79_MACH_EW_DORIN
|
||||
bool "embedded wireless Dorin Platform support"
|
||||
select SOC_AR933X
|
||||
|
@ -116,6 +116,7 @@ obj-$(CONFIG_ATH79_MACH_ENS202EXT) += mach-ens202ext.o
|
||||
obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
|
||||
obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
|
||||
obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o
|
||||
obj-$(CONFIG_ATH79_MACH_EW_BALIN) += mach-ew-balin.o
|
||||
obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
|
||||
obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o
|
||||
|
110
target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c
Normal file
110
target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c
Normal file
@ -0,0 +1,110 @@
|
||||
/*
|
||||
* EW Balin board support
|
||||
* (based on Atheros DB120 reference board support)
|
||||
*
|
||||
* Copyright (c) 2011 Qualcomm Atheros
|
||||
* Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (C) 2017 Embedded Wireless GmbH www.80211.de
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "pci.h"
|
||||
|
||||
#define BALIN_GPIO_LED_STATUS 14
|
||||
|
||||
#define BALIN_GPIO_BTN_WPS 18
|
||||
|
||||
#define BALIN_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define BALIN_KEYS_DEBOUNCE_INTERVAL (3 * BALIN_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define BALIN_CALDATA_OFFSET 0x1000
|
||||
#define BALIN_WMAC_MAC_OFFSET (BALIN_CALDATA_OFFSET + 0x02)
|
||||
|
||||
static struct gpio_led balin_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "balin:green:status",
|
||||
.gpio = BALIN_GPIO_LED_STATUS,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button balin_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "WPS button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.debounce_interval = BALIN_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = BALIN_GPIO_BTN_WPS,
|
||||
.active_low = 0,
|
||||
},
|
||||
};
|
||||
|
||||
|
||||
static void __init balin_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
static u8 mac[6];
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(balin_leds_gpio),
|
||||
balin_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, BALIN_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(balin_gpio_keys),
|
||||
balin_gpio_keys);
|
||||
|
||||
ath79_register_usb();
|
||||
|
||||
ath79_register_wmac(art + BALIN_CALDATA_OFFSET, NULL);
|
||||
|
||||
ath79_register_pci();
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
||||
AR934X_ETH_CFG_SW_ONLY_MODE);
|
||||
|
||||
ath79_register_mdio(1, 0x0);
|
||||
|
||||
/* GMAC1 is connected to the internal switch */
|
||||
memcpy(mac, art + BALIN_WMAC_MAC_OFFSET, sizeof(mac));
|
||||
mac[3] |= 0x40;
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
ath79_eth1_data.speed = SPEED_1000;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
|
||||
ath79_register_eth(1);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_EW_BALIN, "EW-BALIN", "EmbWir-Balin",
|
||||
balin_setup);
|
@ -107,6 +107,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
|
||||
ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
|
||||
ATH79_MACH_ESR900, /* EnGenius ESR900 */
|
||||
ATH79_MACH_EW_BALIN, /* embedded wireless Balin Platform */
|
||||
ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
|
||||
ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
|
||||
ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
|
||||
|
@ -79,6 +79,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y
|
||||
CONFIG_ATH79_MACH_EPG5000=y
|
||||
CONFIG_ATH79_MACH_ESR1750=y
|
||||
CONFIG_ATH79_MACH_ESR900=y
|
||||
CONFIG_ATH79_MACH_EW_BALIN=y
|
||||
CONFIG_ATH79_MACH_EW_DORIN=y
|
||||
CONFIG_ATH79_MACH_F9K1115V2=y
|
||||
CONFIG_ATH79_MACH_FRITZ300E=y
|
||||
|
@ -272,6 +272,15 @@ define Device/dragino2
|
||||
endef
|
||||
TARGET_DEVICES += dragino2
|
||||
|
||||
define Device/ew-balin
|
||||
DEVICE_TITLE := Embedded Wireless Balin Platform
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea
|
||||
BOARDNAME = EW-BALIN
|
||||
IMAGE_SIZE = 16000k
|
||||
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
||||
endef
|
||||
TARGET_DEVICES += ew-balin
|
||||
|
||||
define Device/ew-dorin
|
||||
DEVICE_TITLE := Embedded Wireless Dorin Platform
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea
|
||||
|
Loading…
Reference in New Issue
Block a user