mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
realtek: remove legacy GPIO driver support
This patch removes support for the legacy GPIO driver, since now the gpio-otto driver can be used on all platforms Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
This commit is contained in:
Birger Koblitz
Daniel Golle
parent
2314ba725b
commit
48dd446614
@ -70,7 +70,6 @@ CONFIG_GPIOLIB_IRQCHIP=y
|
||||
CONFIG_GPIO_GENERIC=y
|
||||
CONFIG_GPIO_REALTEK_OTTO=y
|
||||
CONFIG_GPIO_RTL8231=y
|
||||
CONFIG_GPIO_RTL838X=y
|
||||
CONFIG_GRO_CELLS=y
|
||||
CONFIG_HANDLE_DOMAIN_IRQ=y
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
|
||||
@ -1,474 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
#include <linux/gpio/driver.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/delay.h>
|
||||
#include <asm/mach-rtl838x/mach-rtl83xx.h>
|
||||
|
||||
/* RTL8231 registers for LED control */
|
||||
#define RTL8231_LED_FUNC0 0x0000
|
||||
#define RTL8231_GPIO_PIN_SEL(gpio) ((0x0002) + ((gpio) >> 4))
|
||||
#define RTL8231_GPIO_DIR(gpio) ((0x0005) + ((gpio) >> 4))
|
||||
#define RTL8231_GPIO_DATA(gpio) ((0x001C) + ((gpio) >> 4))
|
||||
|
||||
struct rtl838x_gpios {
|
||||
struct gpio_chip gc;
|
||||
u32 id;
|
||||
struct device *dev;
|
||||
int irq;
|
||||
int num_leds;
|
||||
int min_led;
|
||||
int leds_per_port;
|
||||
u32 led_mode;
|
||||
int led_glb_ctrl;
|
||||
int led_sw_ctrl;
|
||||
int (*led_sw_p_ctrl)(int port);
|
||||
int (*led_sw_p_en_ctrl)(int port);
|
||||
int (*ext_gpio_dir)(int i);
|
||||
int (*ext_gpio_data)(int i);
|
||||
};
|
||||
|
||||
inline int rtl838x_ext_gpio_dir(int i)
|
||||
{
|
||||
return RTL838X_EXT_GPIO_DIR + ((i >>5) << 2);
|
||||
}
|
||||
|
||||
inline int rtl839x_ext_gpio_dir(int i)
|
||||
{
|
||||
return RTL839X_EXT_GPIO_DIR + ((i >>5) << 2);
|
||||
}
|
||||
|
||||
inline int rtl838x_ext_gpio_data(int i)
|
||||
{
|
||||
return RTL838X_EXT_GPIO_DATA + ((i >>5) << 2);
|
||||
}
|
||||
|
||||
inline int rtl839x_ext_gpio_data(int i)
|
||||
{
|
||||
return RTL839X_EXT_GPIO_DATA + ((i >>5) << 2);
|
||||
}
|
||||
|
||||
inline int rtl838x_led_sw_p_ctrl(int p)
|
||||
{
|
||||
return RTL838X_LED_SW_P_CTRL + (p << 2);
|
||||
}
|
||||
|
||||
inline int rtl839x_led_sw_p_ctrl(int p)
|
||||
{
|
||||
return RTL839X_LED_SW_P_CTRL + (p << 2);
|
||||
}
|
||||
|
||||
inline int rtl838x_led_sw_p_en_ctrl(int p)
|
||||
{
|
||||
return RTL838X_LED_SW_P_EN_CTRL + ((p / 10) << 2);
|
||||
}
|
||||
|
||||
inline int rtl839x_led_sw_p_en_ctrl(int p)
|
||||
{
|
||||
return RTL839X_LED_SW_P_EN_CTRL + ((p / 10) << 2);
|
||||
}
|
||||
|
||||
extern struct mutex smi_lock;
|
||||
extern struct rtl83xx_soc_info soc_info;
|
||||
|
||||
|
||||
void rtl838x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
|
||||
{
|
||||
int bit;
|
||||
struct rtl838x_gpios *gpios = gpiochip_get_data(gc);
|
||||
|
||||
pr_debug("rtl838x_set: %d, value: %d\n", offset, value);
|
||||
/* Internal GPIO of the RTL8380 */
|
||||
if (offset < 32) {
|
||||
if (value)
|
||||
rtl83xx_w32_mask(0, BIT(offset), RTL838X_GPIO_PABC_DATA);
|
||||
else
|
||||
rtl83xx_w32_mask(BIT(offset), 0, RTL838X_GPIO_PABC_DATA);
|
||||
}
|
||||
|
||||
/* LED driver for PWR and SYS */
|
||||
if (offset >= 32 && offset < 64) {
|
||||
bit = offset - 32;
|
||||
if (value)
|
||||
sw_w32_mask(0, BIT(bit), gpios->led_glb_ctrl);
|
||||
else
|
||||
sw_w32_mask(BIT(bit), 0, gpios->led_glb_ctrl);
|
||||
return;
|
||||
}
|
||||
|
||||
bit = (offset - 64) % 32;
|
||||
/* First Port-LED */
|
||||
if (offset >= 64 && offset < 96
|
||||
&& offset >= (64 + gpios->min_led)
|
||||
&& offset < (64 + gpios->min_led + gpios->num_leds)) {
|
||||
if (value)
|
||||
sw_w32_mask(7, 5, gpios->led_sw_p_ctrl(bit));
|
||||
else
|
||||
sw_w32_mask(7, 0, gpios->led_sw_p_ctrl(bit));
|
||||
}
|
||||
if (offset >= 96 && offset < 128
|
||||
&& offset >= (96 + gpios->min_led)
|
||||
&& offset < (96 + gpios->min_led + gpios->num_leds)) {
|
||||
if (value)
|
||||
sw_w32_mask(7 << 3, 5 << 3, gpios->led_sw_p_ctrl(bit));
|
||||
else
|
||||
sw_w32_mask(7 << 3, 0, gpios->led_sw_p_ctrl(bit));
|
||||
}
|
||||
if (offset >= 128 && offset < 160
|
||||
&& offset >= (128 + gpios->min_led)
|
||||
&& offset < (128 + gpios->min_led + gpios->num_leds)) {
|
||||
if (value)
|
||||
sw_w32_mask(7 << 6, 5 << 6, gpios->led_sw_p_ctrl(bit));
|
||||
else
|
||||
sw_w32_mask(7 << 6, 0, gpios->led_sw_p_ctrl(bit));
|
||||
}
|
||||
__asm__ volatile ("sync");
|
||||
}
|
||||
|
||||
void rtl930x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
|
||||
{
|
||||
pr_debug("rtl838x_set: %d, value: %d\n", offset, value);
|
||||
/* Internal GPIO of the RTL9300 */
|
||||
if (value)
|
||||
rtl83xx_w32_mask(0, BIT(offset), RTL930X_GPIO_PABCD_DAT);
|
||||
else
|
||||
rtl83xx_w32_mask(BIT(offset), 0, RTL930X_GPIO_PABCD_DAT);
|
||||
}
|
||||
|
||||
static int rtl838x_direction_input(struct gpio_chip *gc, unsigned int offset)
|
||||
{
|
||||
pr_debug("%s: %d\n", __func__, offset);
|
||||
|
||||
if (offset < 32) {
|
||||
rtl83xx_w32_mask(BIT(offset), 0, RTL838X_GPIO_PABC_DIR);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Internal LED driver does not support input */
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
|
||||
static int rtl930x_direction_input(struct gpio_chip *gc, unsigned int offset)
|
||||
{
|
||||
pr_debug("%s: %d\n", __func__, offset);
|
||||
|
||||
rtl83xx_w32_mask(BIT(offset), 0, RTL930X_GPIO_PABCD_DIR);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rtl838x_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
|
||||
{
|
||||
pr_debug("%s: %d\n", __func__, offset);
|
||||
if (offset < 32)
|
||||
rtl83xx_w32_mask(0, BIT(offset), RTL838X_GPIO_PABC_DIR);
|
||||
rtl930x_gpio_set(gc, offset, value);
|
||||
|
||||
/* LED for PWR and SYS driver is direction output by default */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rtl930x_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
|
||||
{
|
||||
pr_debug("%s: %d\n", __func__, offset);
|
||||
rtl83xx_w32_mask(0, BIT(offset), RTL930X_GPIO_PABCD_DIR);
|
||||
rtl930x_gpio_set(gc, offset, value);
|
||||
|
||||
/* LED for PWR and SYS driver is direction output by default */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rtl838x_get_direction(struct gpio_chip *gc, unsigned int offset)
|
||||
{
|
||||
u32 v = 0;
|
||||
|
||||
pr_debug("%s: %d\n", __func__, offset);
|
||||
if (offset < 32) {
|
||||
v = rtl83xx_r32(RTL838X_GPIO_PABC_DIR);
|
||||
if (v & BIT(offset))
|
||||
return 0;
|
||||
return 1;
|
||||
}
|
||||
|
||||
/* LED driver for PWR and SYS is direction output by default */
|
||||
if (offset >= 32 && offset < 64)
|
||||
return 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rtl930x_get_direction(struct gpio_chip *gc, unsigned int offset)
|
||||
{
|
||||
u32 v = 0;
|
||||
|
||||
v = rtl83xx_r32(RTL930X_GPIO_PABCD_DIR);
|
||||
if (v & BIT(offset))
|
||||
return 0;
|
||||
return 1;
|
||||
}
|
||||
|
||||
static int rtl838x_gpio_get(struct gpio_chip *gc, unsigned int offset)
|
||||
{
|
||||
u32 v;
|
||||
struct rtl838x_gpios *gpios = gpiochip_get_data(gc);
|
||||
|
||||
pr_debug("%s: %d\n", __func__, offset);
|
||||
|
||||
/* Internal GPIO of the RTL8380 */
|
||||
if (offset < 32) {
|
||||
v = rtl83xx_r32(RTL838X_GPIO_PABC_DATA);
|
||||
if (v & BIT(offset))
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* LED driver for PWR and SYS */
|
||||
if (offset >= 32 && offset < 64) {
|
||||
v = sw_r32(gpios->led_glb_ctrl);
|
||||
if (v & BIT(offset-32))
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rtl930x_gpio_get(struct gpio_chip *gc, unsigned int offset)
|
||||
{
|
||||
u32 v = rtl83xx_r32(RTL930X_GPIO_PABCD_DAT);
|
||||
if (v & BIT(offset))
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
void rtl8380_led_test(struct rtl838x_gpios *gpios, u32 mask)
|
||||
{
|
||||
int i;
|
||||
u32 led_gbl = sw_r32(gpios->led_glb_ctrl);
|
||||
u32 mode_sel, led_p_en;
|
||||
|
||||
if (soc_info.family == RTL8380_FAMILY_ID) {
|
||||
mode_sel = sw_r32(RTL838X_LED_MODE_SEL);
|
||||
led_p_en = sw_r32(RTL838X_LED_P_EN_CTRL);
|
||||
}
|
||||
|
||||
/* 2 Leds for ports 0-23 and 24-27, 3 would be 0x7 */
|
||||
sw_w32_mask(0x3f, 0x3 | (0x3 << 3), gpios->led_glb_ctrl);
|
||||
|
||||
if(soc_info.family == RTL8380_FAMILY_ID) {
|
||||
/* Enable all leds */
|
||||
sw_w32(0xFFFFFFF, RTL838X_LED_P_EN_CTRL);
|
||||
}
|
||||
/* Enable software control of all leds */
|
||||
sw_w32(0xFFFFFFF, gpios->led_sw_ctrl);
|
||||
sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(0));
|
||||
sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(10));
|
||||
sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20));
|
||||
|
||||
for (i = 0; i < 28; i++) {
|
||||
if (mask & BIT(i))
|
||||
sw_w32(5 | (5 << 3) | (5 << 6), gpios->led_sw_p_ctrl(i));
|
||||
}
|
||||
msleep(3000);
|
||||
|
||||
if (soc_info.family == RTL8380_FAMILY_ID)
|
||||
sw_w32(led_p_en, RTL838X_LED_P_EN_CTRL);
|
||||
/* Disable software control of all leds */
|
||||
sw_w32(0x0000000, gpios->led_sw_ctrl);
|
||||
sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(0));
|
||||
sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(10));
|
||||
sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20));
|
||||
|
||||
sw_w32(led_gbl, gpios->led_glb_ctrl);
|
||||
if (soc_info.family == RTL8380_FAMILY_ID)
|
||||
sw_w32(mode_sel, RTL838X_LED_MODE_SEL);
|
||||
}
|
||||
|
||||
void take_port_leds(struct rtl838x_gpios *gpios)
|
||||
{
|
||||
int leds_per_port = gpios->leds_per_port;
|
||||
int mode = gpios->led_mode;
|
||||
|
||||
pr_info("%s, %d, %x\n", __func__, leds_per_port, mode);
|
||||
pr_debug("Bootloader settings: %x %x %x\n",
|
||||
sw_r32(gpios->led_sw_p_en_ctrl(0)),
|
||||
sw_r32(gpios->led_sw_p_en_ctrl(10)),
|
||||
sw_r32(gpios->led_sw_p_en_ctrl(20))
|
||||
);
|
||||
|
||||
if (soc_info.family == RTL8380_FAMILY_ID) {
|
||||
pr_debug("led glb: %x, sel %x\n",
|
||||
sw_r32(gpios->led_glb_ctrl), sw_r32(RTL838X_LED_MODE_SEL));
|
||||
pr_debug("RTL838X_LED_P_EN_CTRL: %x", sw_r32(RTL838X_LED_P_EN_CTRL));
|
||||
pr_debug("RTL838X_LED_MODE_CTRL: %x", sw_r32(RTL838X_LED_MODE_CTRL));
|
||||
sw_w32_mask(3, 0, RTL838X_LED_MODE_SEL);
|
||||
sw_w32(mode, RTL838X_LED_MODE_CTRL);
|
||||
}
|
||||
|
||||
/* Enable software control of all leds */
|
||||
sw_w32(0xFFFFFFF, gpios->led_sw_ctrl);
|
||||
if (soc_info.family == RTL8380_FAMILY_ID)
|
||||
sw_w32(0xFFFFFFF, RTL838X_LED_P_EN_CTRL);
|
||||
|
||||
sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(0));
|
||||
sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(10));
|
||||
sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20));
|
||||
|
||||
sw_w32_mask(0x3f, 0, gpios->led_glb_ctrl);
|
||||
switch (leds_per_port) {
|
||||
case 3:
|
||||
sw_w32_mask(0, 0x7 | (0x7 << 3), gpios->led_glb_ctrl);
|
||||
sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(20));
|
||||
/* FALLTHRU */
|
||||
case 2:
|
||||
sw_w32_mask(0, 0x3 | (0x3 << 3), gpios->led_glb_ctrl);
|
||||
sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(10));
|
||||
/* FALLTHRU */
|
||||
case 1:
|
||||
sw_w32_mask(0, 0x1 | (0x1 << 3), gpios->led_glb_ctrl);
|
||||
sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(0));
|
||||
break;
|
||||
default:
|
||||
pr_err("No LEDS configured for software control\n");
|
||||
}
|
||||
}
|
||||
|
||||
static const struct of_device_id rtl838x_gpio_of_match[] = {
|
||||
{ .compatible = "realtek,rtl838x-gpio" },
|
||||
{},
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(of, rtl838x_gpio_of_match);
|
||||
|
||||
static int rtl838x_gpio_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct device_node *np = dev->of_node;
|
||||
struct rtl838x_gpios *gpios;
|
||||
int err;
|
||||
|
||||
pr_info("Probing RTL838X GPIOs for %08x\n", soc_info.id);
|
||||
|
||||
if (!np) {
|
||||
dev_err(&pdev->dev, "No DT found\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL);
|
||||
if (!gpios)
|
||||
return -ENOMEM;
|
||||
|
||||
gpios->id = soc_info.id;
|
||||
|
||||
switch (gpios->id) {
|
||||
case 0x8332:
|
||||
pr_debug("Found RTL8332M GPIO\n");
|
||||
break;
|
||||
case 0x8380:
|
||||
pr_debug("Found RTL8380M GPIO\n");
|
||||
break;
|
||||
case 0x8381:
|
||||
pr_debug("Found RTL8381M GPIO\n");
|
||||
break;
|
||||
case 0x8382:
|
||||
pr_debug("Found RTL8382M GPIO\n");
|
||||
break;
|
||||
case 0x8391:
|
||||
pr_debug("Found RTL8391 GPIO\n");
|
||||
break;
|
||||
case 0x8393:
|
||||
pr_debug("Found RTL8393 GPIO\n");
|
||||
break;
|
||||
case 0x9302:
|
||||
pr_info("Found RTL9302 GPIO\n");
|
||||
break;
|
||||
default:
|
||||
pr_err("Unknown GPIO chip id (%04x)\n", gpios->id);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (soc_info.family == RTL8380_FAMILY_ID) {
|
||||
gpios->led_glb_ctrl = RTL838X_LED_GLB_CTRL;
|
||||
gpios->led_sw_ctrl = RTL838X_LED_SW_CTRL;
|
||||
gpios->led_sw_p_ctrl = rtl838x_led_sw_p_ctrl;
|
||||
gpios->led_sw_p_en_ctrl = rtl838x_led_sw_p_en_ctrl;
|
||||
gpios->ext_gpio_dir = rtl838x_ext_gpio_dir;
|
||||
gpios->ext_gpio_data = rtl838x_ext_gpio_data;
|
||||
gpios->irq = 31;
|
||||
}
|
||||
|
||||
if (soc_info.family == RTL8390_FAMILY_ID) {
|
||||
gpios->led_glb_ctrl = RTL839X_LED_GLB_CTRL;
|
||||
gpios->led_sw_ctrl = RTL839X_LED_SW_CTRL;
|
||||
gpios->led_sw_p_ctrl = rtl839x_led_sw_p_ctrl;
|
||||
gpios->led_sw_p_en_ctrl = rtl839x_led_sw_p_en_ctrl;
|
||||
gpios->ext_gpio_dir = rtl839x_ext_gpio_dir;
|
||||
gpios->ext_gpio_data = rtl839x_ext_gpio_data;
|
||||
gpios->irq = 31;
|
||||
}
|
||||
|
||||
if (soc_info.family == RTL9300_FAMILY_ID) {
|
||||
gpios->irq = 13;
|
||||
}
|
||||
|
||||
gpios->gc.label = "rtl838x";
|
||||
gpios->gc.parent = dev;
|
||||
gpios->gc.owner = THIS_MODULE;
|
||||
gpios->gc.can_sleep = true;
|
||||
gpios->dev = dev;
|
||||
gpios->gc.base = 0;
|
||||
|
||||
if (soc_info.family != RTL9300_FAMILY_ID) {
|
||||
/* 0-31: internal
|
||||
* 32-63, LED control register
|
||||
* 64-95: PORT-LED 0
|
||||
* 96-127: PORT-LED 1
|
||||
* 128-159: PORT-LED 2
|
||||
*/
|
||||
gpios->gc.ngpio = 160;
|
||||
|
||||
gpios->gc.direction_input = rtl838x_direction_input;
|
||||
gpios->gc.direction_output = rtl838x_direction_output;
|
||||
gpios->gc.set = rtl838x_gpio_set;
|
||||
gpios->gc.get = rtl838x_gpio_get;
|
||||
gpios->gc.get_direction = rtl838x_get_direction;
|
||||
} else {
|
||||
gpios->gc.ngpio = 32;
|
||||
|
||||
gpios->gc.direction_input = rtl930x_direction_input;
|
||||
gpios->gc.direction_output = rtl930x_direction_output;
|
||||
gpios->gc.set = rtl930x_gpio_set;
|
||||
gpios->gc.get = rtl930x_gpio_get;
|
||||
gpios->gc.get_direction = rtl930x_get_direction;
|
||||
}
|
||||
|
||||
if (of_property_read_bool(np, "take-port-leds")) {
|
||||
pr_info("A1\n");
|
||||
if (of_property_read_u32(np, "leds-per-port", &gpios->leds_per_port))
|
||||
gpios->leds_per_port = 2;
|
||||
if (of_property_read_u32(np, "led-mode", &gpios->led_mode))
|
||||
gpios->led_mode = (0x1ea << 15) | 0x1ea;
|
||||
if (of_property_read_u32(np, "num-leds", &gpios->num_leds))
|
||||
gpios->num_leds = 32;
|
||||
if (of_property_read_u32(np, "min-led", &gpios->min_led))
|
||||
gpios->min_led = 0;
|
||||
take_port_leds(gpios);
|
||||
}
|
||||
|
||||
err = devm_gpiochip_add_data(dev, &gpios->gc, gpios);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static struct platform_driver rtl838x_gpio_driver = {
|
||||
.driver = {
|
||||
.name = "rtl838x-gpio",
|
||||
.of_match_table = rtl838x_gpio_of_match,
|
||||
},
|
||||
.probe = rtl838x_gpio_probe,
|
||||
};
|
||||
|
||||
module_platform_driver(rtl838x_gpio_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Realtek RTL838X GPIO API support");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
@ -1,25 +0,0 @@
|
||||
--- a/drivers/gpio/Kconfig
|
||||
+++ b/drivers/gpio/Kconfig
|
||||
@@ -514,6 +514,12 @@ config GPIO_RTL8231
|
||||
help
|
||||
Say yes here to support Realtek RTL8231 GPIO expansion chips.
|
||||
|
||||
+config GPIO_RTL838X
|
||||
+ tristate "RTL838X GPIO"
|
||||
+ depends on RTL838X
|
||||
+ help
|
||||
+ Say yes here to support RTL838X GPIO on RTL93xx SoCs.
|
||||
+
|
||||
config GPIO_SAMA5D2_PIOBU
|
||||
tristate "SAMA5D2 PIOBU GPIO support"
|
||||
depends on MFD_SYSCON
|
||||
--- a/drivers/gpio/Makefile
|
||||
+++ b/drivers/gpio/Makefile
|
||||
@@ -127,6 +127,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc3
|
||||
obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o
|
||||
obj-$(CONFIG_GPIO_REG) += gpio-reg.o
|
||||
obj-$(CONFIG_GPIO_RTL8231) += gpio-rtl8231.o
|
||||
+obj-$(CONFIG_GPIO_RTL838X) += gpio-rtl838x.o
|
||||
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
|
||||
obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o
|
||||
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
|
||||
Loading…
Reference in New Issue
Block a user