xburst: Remove n516, n526 and id800wt subtargets

The driver code for supporting these subtargets was already removed a while ago,
so
the current images wont actually boot.

It is also quite unlikely that there are any users of them at this point, so
remove them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 44586

target/linux/xburst/Makefile

@@ -10,7 +10,7 @@ ARCH:=mipsel
 BOARD:=xburst
 BOARDNAME:=Ingenic XBurst
 FEATURES:=targz nand ubifs audio
-SUBTARGETS:=qi_lb60 n516 n526 id800wt
+SUBTARGETS:=qi_lb60
 
 KERNEL_PATCHVER:=3.10
 

target/linux/xburst/id800wt/config-default

@@ -1,49 +0,0 @@
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_INPUT_MATRIXKMAP=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_MATRIX=y
-# CONFIG_LCD_AMS369FG06 is not set
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_ILI8960=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_REGMAP_SPI=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-CONFIG_USB=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_STORAGE=y

target/linux/xburst/id800wt/target.mk

@@ -1,8 +0,0 @@
-BOARDNAME:=Sungale Pictureframe (id800wt)
-DEFAULT_PACKAGES += \
-	kmod-sound-core \
-	kmod-sound-soc-core \
-	kmod-sound-soc-jz4740 \
-	kmod-sound-soc-jz4740-codec \
-	kmod-sound-soc-id800wt \
-

target/linux/xburst/modules.mk

@@ -35,16 +35,6 @@ define KernelPackage/sound-soc-qilb60
 $(call KernelPackage/sound-soc-xburst/default,QI NanoNote,QI_LB60,qi-lb60,qi_lb60)
 endef
 
-define KernelPackage/sound-soc-n516
-$(call KernelPackage/sound-soc-xburst/default,Hanvon N516,N516,n516)
-endef
-
-define KernelPackage/sound-soc-n526
-$(call KernelPackage/sound-soc-xburst/default,Hanvon N526,N526,n526)
-endef
-
 $(eval $(call KernelPackage,sound-soc-jz4740))
 $(eval $(call KernelPackage,sound-soc-jz4740-codec))
 $(eval $(call KernelPackage,sound-soc-qilb60))
-$(eval $(call KernelPackage,sound-soc-n516))
-$(eval $(call KernelPackage,sound-soc-n526))

target/linux/xburst/n516/config-default

@@ -1,10 +0,0 @@
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_METRONOME=m
-CONFIG_FB_SYS_FOPS=m
-CONFIG_HWMON=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_LEDS_GPIO=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_NEW_LEDS=y
-# CONFIG_SENSORS_JZ4740 is not set
-CONFIG_SENSORS_LM75=y

target/linux/xburst/n516/target.mk

@@ -1,8 +0,0 @@
-BOARDNAME:=Hanvon N516 e-book reader
-DEFAULT_PACKAGES += \
-	kmod-sound-core \
-	kmod-sound-soc-core \
-	kmod-sound-soc-jz4740 \
-	kmod-sound-soc-jz4740-codec \
-	kmod-sound-soc-n516 \
-

target/linux/xburst/n526/config-default

@@ -1 +0,0 @@
-CONFIG_I2C_ALGOBIT=y

target/linux/xburst/n526/target.mk

@@ -1,7 +0,0 @@
-BOARDNAME:=Hanvon N526 e-book reader
-DEFAULT_PACKAGES += \
-	kmod-sound-core \
-	kmod-sound-soc-core \
-	kmod-sound-soc-jz4740 \
-	kmod-sound-soc-jz4740-codec \
-	kmod-sound-soc-n516 \