mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-13 22:23:38 +00:00
bcm27xx: pull 6.6 patches from RPi repo
Adds latest 6.6 patches from the Raspberry Pi repository. These patches were generated from: https://github.com/raspberrypi/linux/commits/rpi-6.6.y/ With the following command: git format-patch -N v6.6.85..HEAD (HEAD -> bba53a117a4a5c29da892962332ff1605990e17a) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This commit is contained in:
Álvaro Fernández Rojas
parent
719f378bfb
commit
4618d09587
@ -0,0 +1,77 @@
|
||||
From 0553897d77e849a86e836ddf1e0c0dbbd8e64f83 Mon Sep 17 00:00:00 2001
|
||||
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
||||
Date: Mon, 20 Jan 2025 10:40:09 +0000
|
||||
Subject: [PATCH] media: i2c: imx477: Add further link frequency options
|
||||
|
||||
https://github.com/raspberrypi/linux/issues/6004 reports further
|
||||
issues with GPS interference.
|
||||
|
||||
Untested, but adds further link frequency options.
|
||||
|
||||
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
||||
---
|
||||
drivers/media/i2c/imx477.c | 33 +++++++++++++++++++++++++++++++++
|
||||
1 file changed, 33 insertions(+)
|
||||
|
||||
--- a/drivers/media/i2c/imx477.c
|
||||
+++ b/drivers/media/i2c/imx477.c
|
||||
@@ -169,12 +169,18 @@ enum {
|
||||
IMX477_LINK_FREQ_450MHZ,
|
||||
IMX477_LINK_FREQ_453MHZ,
|
||||
IMX477_LINK_FREQ_456MHZ,
|
||||
+ IMX477_LINK_FREQ_459MHZ,
|
||||
+ IMX477_LINK_FREQ_462MHZ,
|
||||
+ IMX477_LINK_FREQ_498MHZ,
|
||||
};
|
||||
|
||||
static const s64 link_freqs[] = {
|
||||
[IMX477_LINK_FREQ_450MHZ] = 450000000,
|
||||
[IMX477_LINK_FREQ_453MHZ] = 453000000,
|
||||
[IMX477_LINK_FREQ_456MHZ] = 456000000,
|
||||
+ [IMX477_LINK_FREQ_459MHZ] = 459000000,
|
||||
+ [IMX477_LINK_FREQ_462MHZ] = 462000000,
|
||||
+ [IMX477_LINK_FREQ_498MHZ] = 498000000,
|
||||
};
|
||||
|
||||
/* 450MHz is the nominal "default" link frequency */
|
||||
@@ -193,6 +199,21 @@ static const struct imx477_reg link_456M
|
||||
{0x030F, 0x98},
|
||||
};
|
||||
|
||||
+static const struct imx477_reg link_459Mhz_regs[] = {
|
||||
+ {0x030E, 0x00},
|
||||
+ {0x030F, 0x99},
|
||||
+};
|
||||
+
|
||||
+static const struct imx477_reg link_462Mhz_regs[] = {
|
||||
+ {0x030E, 0x00},
|
||||
+ {0x030F, 0x9a},
|
||||
+};
|
||||
+
|
||||
+static const struct imx477_reg link_498Mhz_regs[] = {
|
||||
+ {0x030E, 0x00},
|
||||
+ {0x030F, 0xa6},
|
||||
+};
|
||||
+
|
||||
static const struct imx477_reg_list link_freq_regs[] = {
|
||||
[IMX477_LINK_FREQ_450MHZ] = {
|
||||
.regs = link_450Mhz_regs,
|
||||
@@ -206,6 +227,18 @@ static const struct imx477_reg_list link
|
||||
.regs = link_456Mhz_regs,
|
||||
.num_of_regs = ARRAY_SIZE(link_456Mhz_regs)
|
||||
},
|
||||
+ [IMX477_LINK_FREQ_459MHZ] = {
|
||||
+ .regs = link_459Mhz_regs,
|
||||
+ .num_of_regs = ARRAY_SIZE(link_459Mhz_regs)
|
||||
+ },
|
||||
+ [IMX477_LINK_FREQ_462MHZ] = {
|
||||
+ .regs = link_462Mhz_regs,
|
||||
+ .num_of_regs = ARRAY_SIZE(link_462Mhz_regs)
|
||||
+ },
|
||||
+ [IMX477_LINK_FREQ_498MHZ] = {
|
||||
+ .regs = link_498Mhz_regs,
|
||||
+ .num_of_regs = ARRAY_SIZE(link_498Mhz_regs)
|
||||
+ },
|
||||
};
|
||||
|
||||
static const struct imx477_reg mode_common_regs[] = {
|
||||
@ -0,0 +1,82 @@
|
||||
From 9da8d6df2051478f0ba16d73c65995955c19cb3a Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.com>
|
||||
Date: Tue, 18 Mar 2025 13:09:11 +0000
|
||||
Subject: [PATCH] overlays: Fix some unusable fragments
|
||||
|
||||
A forthcoming overlaycheck update looks for dormant fragments with no
|
||||
parameters to enable them. The test discovered some real errors, which
|
||||
this patch fixes, and one case where some fragments aren't yet being
|
||||
used, which this comments out until they are.
|
||||
|
||||
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
---
|
||||
arch/arm/boot/dts/overlays/rpi-poe-overlay.dts | 2 +-
|
||||
arch/arm/boot/dts/overlays/rpi-poe-plus-overlay.dts | 2 +-
|
||||
arch/arm/boot/dts/overlays/sx150x-overlay.dts | 2 +-
|
||||
arch/arm/boot/dts/overlays/vc4-kms-dpi-panel-overlay.dts | 4 ++++
|
||||
4 files changed, 7 insertions(+), 3 deletions(-)
|
||||
|
||||
--- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts
|
||||
+++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts
|
||||
@@ -145,7 +145,7 @@
|
||||
poe_fan_temp2_hyst = <&trip2>,"hysteresis:0";
|
||||
poe_fan_temp3 = <&trip3>,"temperature:0";
|
||||
poe_fan_temp3_hyst = <&trip3>,"hysteresis:0";
|
||||
- i2c = <0>, "+5+6",
|
||||
+ i2c = <0>, "+7+8",
|
||||
<&fwpwm>,"status=disabled",
|
||||
<&i2c_bus>,"status=okay",
|
||||
<&poe_mfd>,"status=okay",
|
||||
--- a/arch/arm/boot/dts/overlays/rpi-poe-plus-overlay.dts
|
||||
+++ b/arch/arm/boot/dts/overlays/rpi-poe-plus-overlay.dts
|
||||
@@ -28,7 +28,7 @@
|
||||
};
|
||||
|
||||
__overrides__ {
|
||||
- i2c = <0>, "+5+6",
|
||||
+ i2c = <0>, "+7+8",
|
||||
<&fwpwm>,"status=disabled",
|
||||
<&rpi_poe_power_supply>,"status=disabled",
|
||||
<&i2c_bus>,"status=okay",
|
||||
--- a/arch/arm/boot/dts/overlays/sx150x-overlay.dts
|
||||
+++ b/arch/arm/boot/dts/overlays/sx150x-overlay.dts
|
||||
@@ -1681,7 +1681,7 @@
|
||||
sx1507-1-3E-int-gpio = <0>,"+67+99", <&sx150x_1_3E_pins>,"brcm,pins:0", <&sx1507_1_3E>,"interrupts:0";
|
||||
sx1507-0-3F-int-gpio = <0>,"+68+100", <&sx150x_0_3F_pins>,"brcm,pins:0", <&sx1507_0_3F>,"interrupts:0";
|
||||
sx1507-1-3F-int-gpio = <0>,"+69+101", <&sx150x_1_3F_pins>,"brcm,pins:0", <&sx1507_1_3F>,"interrupts:0";
|
||||
- sx1507-0-70-int-gpio = <0>,"+60+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1507_0_70>,"interrupts:0";
|
||||
+ sx1507-0-70-int-gpio = <0>,"+70+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1507_0_70>,"interrupts:0";
|
||||
sx1507-1-70-int-gpio = <0>,"+71+103", <&sx150x_1_70_pins>,"brcm,pins:0", <&sx1507_1_70>,"interrupts:0";
|
||||
sx1507-0-71-int-gpio = <0>,"+72+104", <&sx150x_0_71_pins>,"brcm,pins:0", <&sx1507_0_71>,"interrupts:0";
|
||||
sx1507-1-71-int-gpio = <0>,"+73+105", <&sx150x_1_71_pins>,"brcm,pins:0", <&sx1507_1_71>,"interrupts:0";
|
||||
--- a/arch/arm/boot/dts/overlays/vc4-kms-dpi-panel-overlay.dts
|
||||
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dpi-panel-overlay.dts
|
||||
@@ -42,24 +42,28 @@
|
||||
pinctrl-0 = <&dpi_18bit_gpio0>;
|
||||
};
|
||||
};
|
||||
+#if 0
|
||||
fragment@92 {
|
||||
target = <&dpi>;
|
||||
__dormant__ {
|
||||
pinctrl-0 = <&dpi_gpio0>;
|
||||
};
|
||||
};
|
||||
+#endif
|
||||
fragment@93 {
|
||||
target = <&dpi>;
|
||||
__dormant__ {
|
||||
pinctrl-0 = <&dpi_16bit_cpadhi_gpio0>;
|
||||
};
|
||||
};
|
||||
+#if 0
|
||||
fragment@94 {
|
||||
target = <&dpi>;
|
||||
__dormant__ {
|
||||
pinctrl-0 = <&dpi_16bit_gpio0>;
|
||||
};
|
||||
};
|
||||
+#endif
|
||||
|
||||
__overrides__ {
|
||||
at056tn53v1 = <0>, "+0+90";
|
||||
@ -0,0 +1,33 @@
|
||||
From bba53a117a4a5c29da892962332ff1605990e17a Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.com>
|
||||
Date: Wed, 26 Mar 2025 11:28:28 +0000
|
||||
Subject: [PATCH] dts: rp1: Don't use DMA with UARTs
|
||||
|
||||
DMA has been enabled on RP1's UART0, but with mixed success. Transmits
|
||||
seem to work, but the DMA interface is not well suited to receiving
|
||||
arbitrary amounts of data. In particular, the PL011 driver is slow to
|
||||
pass on the received data, batching it into large blocks.
|
||||
|
||||
On balance, it's better to just disable the DMA support. As with the
|
||||
other UARTs, the required runes are left in the DTS as comments.
|
||||
|
||||
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
---
|
||||
arch/arm64/boot/dts/broadcom/rp1.dtsi | 6 +++---
|
||||
1 file changed, 3 insertions(+), 3 deletions(-)
|
||||
|
||||
--- a/arch/arm64/boot/dts/broadcom/rp1.dtsi
|
||||
+++ b/arch/arm64/boot/dts/broadcom/rp1.dtsi
|
||||
@@ -65,9 +65,9 @@
|
||||
interrupts = <RP1_INT_UART0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
- dmas = <&rp1_dma RP1_DMA_UART0_TX>,
|
||||
- <&rp1_dma RP1_DMA_UART0_RX>;
|
||||
- dma-names = "tx", "rx";
|
||||
+ // dmas = <&rp1_dma RP1_DMA_UART0_TX>,
|
||||
+ // <&rp1_dma RP1_DMA_UART0_RX>;
|
||||
+ // dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
arm,primecell-periphid = <0x00341011>;
|
||||
uart-has-rtscts;
|
||||
Loading…
x
Reference in New Issue
Block a user