mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
mediatek: add support for TOTOLINK A8000RU
Specifications: - SoC: MT7622 - RAM: 512MB - Flash: MX35LF1GE4AB 128MB SPI NAND - Ethernet: RTL8367S 5x1GbE - WiFi: 2.4G: MT7622 5G: MT7615N x2 - Other ports: USB3.0 x1 Flash instruction: *important*: upgrade vendor firmware to at least V7.1cu.643_B20200521 1. hold the reset button and power on the device. wait for about 10s before releasing the reset button. 2. upload sysupgrade.bin via u-boot recovery page on http://192.168.1.1 Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
This commit is contained in:
Chuanhong Guo
parent
9e9057f416
commit
43f0e386d4
329
target/linux/mediatek/dts/mt7622-totolink-a8000ru.dts
Normal file
329
target/linux/mediatek/dts/mt7622-totolink-a8000ru.dts
Normal file
@ -0,0 +1,329 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
#include "mt7622.dtsi"
|
||||
#include "mt6380.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TOTOLINK A8000RU";
|
||||
compatible = "totolink,a8000ru", "mediatek,mt7622";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac0;
|
||||
led-boot = &led_status;
|
||||
led-failsafe = &led_status;
|
||||
led-running = &led_status;
|
||||
led-upgrade = &led_status;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
proc-supply = <&mt6380_vcpu_reg>;
|
||||
sram-supply = <&mt6380_vm_reg>;
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
proc-supply = <&mt6380_vcpu_reg>;
|
||||
sram-supply = <&mt6380_vm_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 102 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status: status_red {
|
||||
label = "red:status";
|
||||
gpios = <&pio 81 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
rtkgsw: rtkgsw@0 {
|
||||
compatible = "mediatek,rtk-gsw";
|
||||
mediatek,ethsys = <ðsys>;
|
||||
mediatek,mdio = <&mdio>;
|
||||
mediatek,reset-pin = <&pio 54 0>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&slot0 {
|
||||
mt7615@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x5000>;
|
||||
ieee80211-freq-limit = <5490000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&slot1 {
|
||||
mt7615@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x10000>;
|
||||
ieee80211-freq-limit = <5000000 5490000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
eth_pins: eth-pins {
|
||||
mux {
|
||||
function = "eth";
|
||||
groups = "mdc_mdio", "rgmii_via_gmac2";
|
||||
};
|
||||
};
|
||||
|
||||
pcie0_pins: pcie0-pins {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie0_pad_perst",
|
||||
"pcie0_1_waken",
|
||||
"pcie0_1_clkreq";
|
||||
};
|
||||
};
|
||||
|
||||
pcie1_pins: pcie1-pins {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie1_pad_perst",
|
||||
"pcie1_0_waken",
|
||||
"pcie1_0_clkreq";
|
||||
};
|
||||
};
|
||||
|
||||
pmic_bus_pins: pmic-bus-pins {
|
||||
mux {
|
||||
function = "pmic";
|
||||
groups = "pmic_bus";
|
||||
};
|
||||
};
|
||||
|
||||
/* serial NAND is shared pin with SPI-NOR */
|
||||
serial_nand_pins: serial-nand-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "snfi";
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart0_0_tx_rx" ;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog_pins: watchdog-pins {
|
||||
mux {
|
||||
function = "watchdog";
|
||||
groups = "watchdog";
|
||||
};
|
||||
};
|
||||
|
||||
epa_elna_pins: epa-elna-pins {
|
||||
mux {
|
||||
function = "antsel";
|
||||
groups = "antsel0", "antsel1", "antsel2", "antsel3",
|
||||
"antsel4", "antsel5", "antsel6", "antsel7",
|
||||
"antsel8", "antsel9", "antsel12", "antsel13",
|
||||
"antsel14", "antsel15", "antsel16", "antsel17";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð_pins>;
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
nvmem-cells = <&macaddr_factory_2a>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
phy-connection-type = "2500base-x";
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "rgmii";
|
||||
nvmem-cells = <&macaddr_factory_24>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwrap {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_bus_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&snand {
|
||||
mediatek,quad-spi;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&serial_nand_pins>;
|
||||
status = "okay";
|
||||
mediatek,bmt-v2;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Preloader";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "ATF";
|
||||
reg = <0x80000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "u-boot";
|
||||
reg = <0xc0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x140000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@1c0000 {
|
||||
label = "factory";
|
||||
reg = <0x1c0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "ubi";
|
||||
reg = <0x200000 0x6400000>;
|
||||
};
|
||||
|
||||
partition@6600000 {
|
||||
label = "User_data";
|
||||
reg = <0x6600000 0x100000>;
|
||||
};
|
||||
|
||||
/* size of this partition varies due to BMT & bad blocks. */
|
||||
partition@6700000 {
|
||||
label = "reserved";
|
||||
reg = <0x6700000 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&factory {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_24: macaddr@24 {
|
||||
reg = <0x24 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_2a: macaddr@2a {
|
||||
reg = <0x2a 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
&ssusb {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&watchdog_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&epa_elna_pins>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -202,6 +202,16 @@ define Device/mediatek_mt7622-rfb1-ubi
|
||||
endef
|
||||
TARGET_DEVICES += mediatek_mt7622-rfb1-ubi
|
||||
|
||||
define Device/totolink_a8000ru
|
||||
DEVICE_VENDOR := TOTOLINK
|
||||
DEVICE_MODEL := A8000RU
|
||||
DEVICE_DTS := mt7622-totolink-a8000ru
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := swconfig
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += totolink_a8000ru
|
||||
|
||||
define Device/ubnt_unifi-6-lr
|
||||
DEVICE_VENDOR := Ubiquiti
|
||||
DEVICE_MODEL := UniFi 6 LR
|
||||
|
||||
@ -54,6 +54,9 @@ platform_do_upgrade() {
|
||||
fi
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
totolink,a8000ru)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
@ -72,6 +75,9 @@ platform_check_image() {
|
||||
buffalo,wsr-2533dhp2)
|
||||
buffalo_check_image "$board" "$magic" "$1" || return 1
|
||||
;;
|
||||
totolink,a8000ru)
|
||||
nand_do_platform_check "$board" "$1"
|
||||
;;
|
||||
*)
|
||||
[ "$magic" != "d00dfeed" ] && {
|
||||
echo "Invalid image type."
|
||||
|
||||
Loading…
Reference in New Issue
Block a user