mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
ath79: Add wifi to WNDR3700, WNDR3700v2 and WNDR3800
Add ath9k wifi capabilities to WNDR3700 family. * use kmod-owl-loader to load firmware from "art" * add wifi to DTS * add wifi LEDs Avoid using the same MAC for eth0 LAN and wlan0 by toggling the eth0 MAC into a locally administered MAC. That is currently done by in user-space by adding a uci config item into /etc/config/network (More elegant solution might be setting it already in preinit phase.) Known issues: * wifi firmware file may not get created on the first boot after flashing on time to bring wifi normally up. Likely the overlay jffs2 is not yet ready for creating the firmware file. "wifi up" may still bring wifi up. Wifi will work normally at subsequent boots. * phy0 and phy1 may get assigned mixed, so that phy0 may be the 5GHz radio instead of the normal 2.4GHz, and vice versa for phy1. Does not happen always, but may happen. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> [fix the wifi unit address in the dts] Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
parent
b2a33d5463
commit
437e35f8a3
@ -160,6 +160,11 @@ ath79_setup_macs()
|
|||||||
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||||
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
|
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
|
||||||
;;
|
;;
|
||||||
|
netgear,wndr3700|\
|
||||||
|
netgear,wndr3700v2|\
|
||||||
|
netgear,wndr3800)
|
||||||
|
lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0)")
|
||||||
|
;;
|
||||||
phicomm,k2t)
|
phicomm,k2t)
|
||||||
lan_mac=$(k2t_get_mac "lan_mac")
|
lan_mac=$(k2t_get_mac "lan_mac")
|
||||||
wan_mac=$(k2t_get_mac "wan_mac")
|
wan_mac=$(k2t_get_mac "wan_mac")
|
||||||
|
@ -146,6 +146,11 @@ case "$FIRMWARE" in
|
|||||||
ath9k_eeprom_extract "caldata" 4096 3768
|
ath9k_eeprom_extract "caldata" 4096 3768
|
||||||
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524
|
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524
|
||||||
;;
|
;;
|
||||||
|
netgear,wndr3700|\
|
||||||
|
netgear,wndr3700v2|\
|
||||||
|
netgear,wndr3800)
|
||||||
|
ath9k_eeprom_extract "art" 4096 3768
|
||||||
|
;;
|
||||||
*)
|
*)
|
||||||
ath9k_eeprom_die "board $board is not supported yet"
|
ath9k_eeprom_die "board $board is not supported yet"
|
||||||
;;
|
;;
|
||||||
@ -157,6 +162,11 @@ case "$FIRMWARE" in
|
|||||||
ath9k_eeprom_extract "caldata" 20480 3768
|
ath9k_eeprom_extract "caldata" 20480 3768
|
||||||
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524
|
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524
|
||||||
;;
|
;;
|
||||||
|
netgear,wndr3700|\
|
||||||
|
netgear,wndr3700v2|\
|
||||||
|
netgear,wndr3800)
|
||||||
|
ath9k_eeprom_extract "art" 20480 3768
|
||||||
|
;;
|
||||||
*)
|
*)
|
||||||
ath9k_eeprom_die "board $board is not supported yet"
|
ath9k_eeprom_die "board $board is not supported yet"
|
||||||
;;
|
;;
|
||||||
|
@ -67,6 +67,22 @@
|
|||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
ath9k-leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
wlan2g {
|
||||||
|
label = "netgear:green:wlan2g";
|
||||||
|
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
|
||||||
|
default-state = "off";
|
||||||
|
linux,default-trigger = "phy0tpt";
|
||||||
|
};
|
||||||
|
wlan5g {
|
||||||
|
label = "netgear:blue:wlan5g";
|
||||||
|
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
|
||||||
|
default-state = "off";
|
||||||
|
linux,default-trigger = "phy1tpt";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
gpio-keys-polled {
|
gpio-keys-polled {
|
||||||
compatible = "gpio-keys-polled";
|
compatible = "gpio-keys-polled";
|
||||||
poll-interval = <100>;
|
poll-interval = <100>;
|
||||||
@ -138,6 +154,24 @@
|
|||||||
|
|
||||||
&pcie0 {
|
&pcie0 {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
||||||
|
ath9k0: wifi@0,11 {
|
||||||
|
compatible = "pci168c,0029";
|
||||||
|
reg = <0x8800 0 0 0 0x10000>;
|
||||||
|
mtd-mac-address = <&art 0x0>;
|
||||||
|
qca,no-eeprom;
|
||||||
|
#gpio-cells = <2>;
|
||||||
|
gpio-controller;
|
||||||
|
};
|
||||||
|
|
||||||
|
ath9k1: wifi@0,12 {
|
||||||
|
compatible = "pci168c,0029";
|
||||||
|
reg = <0x9000 0 0 0 0x10000>;
|
||||||
|
mtd-mac-address = <&art 0xc>;
|
||||||
|
qca,no-eeprom;
|
||||||
|
#gpio-cells = <2>;
|
||||||
|
gpio-controller;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
&uart {
|
&uart {
|
||||||
|
@ -141,7 +141,7 @@ define Device/netgear_wndr3x00
|
|||||||
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
|
||||||
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
||||||
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
|
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
|
||||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
|
||||||
endef
|
endef
|
||||||
|
|
||||||
define Device/netgear_wndr3700
|
define Device/netgear_wndr3700
|
||||||
|
Loading…
Reference in New Issue
Block a user