From 435dc2e77e3b6a92b3be1e386bf99d4d458d2bb9 Mon Sep 17 00:00:00 2001 From: Stefan Lippers-Hollmann Date: Fri, 7 May 2021 01:09:50 +0200 Subject: [PATCH] ipq806x: ecw5410: case-insensitive qcom-smem partitions The out-of-tree qcom-smem patches traditionally displayed mtd partition names in upper case, starting with the new mainline qcom-smem support in kernel v5.10, it switches to normalizing the partition names to lower case. Signed-off-by: Stefan Lippers-Hollmann --- .../ipq806x/base-files/etc/board.d/02_network | 10 ++++++++-- .../etc/hotplug.d/firmware/11-ath10k-caldata | 14 ++++++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index 511794a3cea..abdab898570 100644 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -28,8 +28,14 @@ tplink,vr2600v) ;; edgecore,ecw5410) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:ART" 0x6)" - ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:ART" 0x0)" + if [ -b "$(find_mtd_part 0:art)" ]; then + ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:art" 0x6)" + ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:art" 0x0)" + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:ART" 0x6)" + ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:ART" 0x0)" + fi ;; linksys,ea7500-v1) hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 3dd7a51d5d0..fca35516ec6 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -22,7 +22,12 @@ case "$FIRMWARE" in ath10k_patch_mac $(mtd_get_mac_binary ART 0x1e) ;; edgecore,ecw5410) - caldata_extract "0:ART" 0x1000 0x2f20 + if [ -b "$(find_mtd_part 0:art)" ]; then + caldata_extract "0:art" 0x1000 0x2f20 + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + caldata_extract "0:ART" 0x1000 0x2f20 + fi ;; linksys,ea7500-v1 |\ linksys,ea8500) @@ -115,7 +120,12 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0002:01:00.0.bin") case $board in edgecore,ecw5410) - caldata_extract "0:ART" 0x5000 0x2f20 + if [ -b "$(find_mtd_part 0:art)" ]; then + caldata_extract "0:art" 0x5000 0x2f20 + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + caldata_extract "0:ART" 0x5000 0x2f20 + fi ;; esac ;;