diff --git a/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch b/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch deleted file mode 100644 index 6593e43db70..00000000000 --- a/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch +++ /dev/null @@ -1,101 +0,0 @@ -From 24a43ae2ac0ea06c474b1c80dc75651294d49321 Mon Sep 17 00:00:00 2001 -From: Thomas Nixon -Date: Sat, 2 Oct 2021 00:48:05 +0100 -Subject: [PATCH 2/2] net: lantiq: enable jumbo frames on GSWIP - -This enables non-standard MTUs on a per-port basis, with the overall -frame size set based on the CPU port. - -When the MTU is not changed, this should have no effect. - -Long packets crash the switch with MTUs of greater than 2526, so the -maximum is limited for now. - -Signed-off-by: Thomas Nixon ---- - drivers/net/dsa/lantiq_gswip.c | 46 +++++++++++++++++++++++++++++++--- - 1 file changed, 42 insertions(+), 4 deletions(-) - ---- a/drivers/net/dsa/lantiq_gswip.c -+++ b/drivers/net/dsa/lantiq_gswip.c -@@ -238,6 +238,11 @@ - - #define XRX200_GPHY_FW_ALIGN (16 * 1024) - -+/* maximum packet size supported by the switch; in theory this should be 9600, -+ * but long packets currently cause lock-ups with an MTU of over 2526 -+ */ -+#define GSWIP_MAX_PACKET_LENGTH 2556 -+ - struct gswip_hw_info { - int max_ports; - int cpu_port; -@@ -856,10 +861,6 @@ static int gswip_setup(struct dsa_switch - gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS, - GSWIP_PCE_PCTRL_0p(cpu_port)); - -- gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, -- GSWIP_MAC_CTRL_2p(cpu_port)); -- gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN, -- GSWIP_MAC_FLEN); - gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD, - GSWIP_BM_QUEUE_GCTRL); - -@@ -876,6 +877,8 @@ static int gswip_setup(struct dsa_switch - return err; - } - -+ ds->mtu_enforcement_ingress = true; -+ - gswip_port_enable(ds, cpu_port, NULL); - return 0; - } -@@ -1438,6 +1441,39 @@ static int gswip_port_fdb_dump(struct ds - return 0; - } - -+static int gswip_port_max_mtu(struct dsa_switch *ds, int port) -+{ -+ /* includes 8 bytes for special header */ -+ return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; -+} -+ -+static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) -+{ -+ struct gswip_priv *priv = ds->priv; -+ int cpu_port = priv->hw_info->cpu_port; -+ -+ /* cpu port always has maximum mtu of user ports, so use it to set -+ * switch frame size, including 8 byte special header -+ */ -+ if (port == cpu_port) { -+ new_mtu += 8; -+ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN, -+ GSWIP_MAC_FLEN); -+ } -+ -+ /* enable MLEN for ports with non-standard MTUs, including the special -+ * header on the CPU port added above -+ */ -+ if (new_mtu != ETH_DATA_LEN) -+ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, -+ GSWIP_MAC_CTRL_2p(port)); -+ else -+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0, -+ GSWIP_MAC_CTRL_2p(port)); -+ -+ return 0; -+} -+ - static void gswip_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) -@@ -1781,6 +1817,8 @@ static const struct dsa_switch_ops gswip - .port_fdb_add = gswip_port_fdb_add, - .port_fdb_del = gswip_port_fdb_del, - .port_fdb_dump = gswip_port_fdb_dump, -+ .port_change_mtu = gswip_port_change_mtu, -+ .port_max_mtu = gswip_port_max_mtu, - .phylink_validate = gswip_phylink_validate, - .phylink_mac_config = gswip_phylink_mac_config, - .phylink_mac_link_down = gswip_phylink_mac_link_down, diff --git a/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch b/target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch similarity index 100% rename from target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch rename to target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch diff --git a/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch b/target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch similarity index 100% rename from target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch rename to target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch diff --git a/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch b/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch new file mode 100644 index 00000000000..c0911ef874f --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch @@ -0,0 +1,275 @@ +From a09d042b086202735c4ed64573cdd79933020001 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Mon, 22 Mar 2021 21:37:15 +0100 +Subject: [PATCH] net: dsa: lantiq: allow to use all GPHYs on xRX300 and xRX330 + +This patch allows to use all PHYs on GRX300 and GRX330. The ARX300 +has 3 and the GRX330 has 4 integrated PHYs connected to different +ports compared to VRX200. Each integrated PHY can work as single +Gigabit Ethernet PHY (GMII) or as double Fast Ethernet PHY (MII). + +Allowed port configurations: + +xRX200: +GMAC0: RGMII, MII, REVMII or RMII port +GMAC1: RGMII, MII, REVMII or RMII port +GMAC2: GPHY0 (GMII) +GMAC3: GPHY0 (MII) +GMAC4: GPHY1 (GMII) +GMAC5: GPHY1 (MII) or RGMII port + +xRX300: +GMAC0: RGMII port +GMAC1: GPHY2 (GMII) +GMAC2: GPHY0 (GMII) +GMAC3: GPHY0 (MII) +GMAC4: GPHY1 (GMII) +GMAC5: GPHY1 (MII) or RGMII port + +xRX330: +GMAC0: RGMII, GMII or RMII port +GMAC1: GPHY2 (GMII) +GMAC2: GPHY0 (GMII) +GMAC3: GPHY0 (MII) or GPHY3 (GMII) +GMAC4: GPHY1 (GMII) +GMAC5: GPHY1 (MII), RGMII or RMII port + +Tested on D-Link DWR966 (xRX330) with OpenWRT. + +Signed-off-by: Aleksander Jan Bajkowski +Acked-by: Hauke Mehrtens +Signed-off-by: David S. Miller +--- + drivers/net/dsa/lantiq_gswip.c | 142 ++++++++++++++++++++++++++------- + 1 file changed, 113 insertions(+), 29 deletions(-) + +--- a/drivers/net/dsa/lantiq_gswip.c ++++ b/drivers/net/dsa/lantiq_gswip.c +@@ -1,6 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0 + /* +- * Lantiq / Intel GSWIP switch driver for VRX200 SoCs ++ * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs + * + * Copyright (C) 2010 Lantiq Deutschland + * Copyright (C) 2012 John Crispin +@@ -104,6 +104,7 @@ + #define GSWIP_MII_CFG_MODE_RMIIP 0x2 + #define GSWIP_MII_CFG_MODE_RMIIM 0x3 + #define GSWIP_MII_CFG_MODE_RGMII 0x4 ++#define GSWIP_MII_CFG_MODE_GMII 0x9 + #define GSWIP_MII_CFG_MODE_MASK 0xf + #define GSWIP_MII_CFG_RATE_M2P5 0x00 + #define GSWIP_MII_CFG_RATE_M25 0x10 +@@ -241,6 +242,7 @@ + struct gswip_hw_info { + int max_ports; + int cpu_port; ++ const struct dsa_switch_ops *ops; + }; + + struct xway_gphy_match_data { +@@ -1438,12 +1440,42 @@ static int gswip_port_fdb_dump(struct ds + return 0; + } + +-static void gswip_phylink_validate(struct dsa_switch *ds, int port, +- unsigned long *supported, +- struct phylink_link_state *state) ++static void gswip_phylink_set_capab(unsigned long *supported, ++ struct phylink_link_state *state) + { + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + ++ /* Allow all the expected bits */ ++ phylink_set(mask, Autoneg); ++ phylink_set_port_modes(mask); ++ phylink_set(mask, Pause); ++ phylink_set(mask, Asym_Pause); ++ ++ /* With the exclusion of MII, Reverse MII and Reduced MII, we ++ * support Gigabit, including Half duplex ++ */ ++ if (state->interface != PHY_INTERFACE_MODE_MII && ++ state->interface != PHY_INTERFACE_MODE_REVMII && ++ state->interface != PHY_INTERFACE_MODE_RMII) { ++ phylink_set(mask, 1000baseT_Full); ++ phylink_set(mask, 1000baseT_Half); ++ } ++ ++ phylink_set(mask, 10baseT_Half); ++ phylink_set(mask, 10baseT_Full); ++ phylink_set(mask, 100baseT_Half); ++ phylink_set(mask, 100baseT_Full); ++ ++ bitmap_and(supported, supported, mask, ++ __ETHTOOL_LINK_MODE_MASK_NBITS); ++ bitmap_and(state->advertising, state->advertising, mask, ++ __ETHTOOL_LINK_MODE_MASK_NBITS); ++} ++ ++static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port, ++ unsigned long *supported, ++ struct phylink_link_state *state) ++{ + switch (port) { + case 0: + case 1: +@@ -1470,38 +1502,54 @@ static void gswip_phylink_validate(struc + return; + } + +- /* Allow all the expected bits */ +- phylink_set(mask, Autoneg); +- phylink_set_port_modes(mask); +- phylink_set(mask, Pause); +- phylink_set(mask, Asym_Pause); ++ gswip_phylink_set_capab(supported, state); + +- /* With the exclusion of MII, Reverse MII and Reduced MII, we +- * support Gigabit, including Half duplex +- */ +- if (state->interface != PHY_INTERFACE_MODE_MII && +- state->interface != PHY_INTERFACE_MODE_REVMII && +- state->interface != PHY_INTERFACE_MODE_RMII) { +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseT_Half); ++ return; ++ ++unsupported: ++ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); ++ dev_err(ds->dev, "Unsupported interface '%s' for port %d\n", ++ phy_modes(state->interface), port); ++} ++ ++static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port, ++ unsigned long *supported, ++ struct phylink_link_state *state) ++{ ++ switch (port) { ++ case 0: ++ if (!phy_interface_mode_is_rgmii(state->interface) && ++ state->interface != PHY_INTERFACE_MODE_GMII && ++ state->interface != PHY_INTERFACE_MODE_RMII) ++ goto unsupported; ++ break; ++ case 1: ++ case 2: ++ case 3: ++ case 4: ++ if (state->interface != PHY_INTERFACE_MODE_INTERNAL) ++ goto unsupported; ++ break; ++ case 5: ++ if (!phy_interface_mode_is_rgmii(state->interface) && ++ state->interface != PHY_INTERFACE_MODE_INTERNAL && ++ state->interface != PHY_INTERFACE_MODE_RMII) ++ goto unsupported; ++ break; ++ default: ++ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); ++ dev_err(ds->dev, "Unsupported port: %i\n", port); ++ return; + } + +- phylink_set(mask, 10baseT_Half); +- phylink_set(mask, 10baseT_Full); +- phylink_set(mask, 100baseT_Half); +- phylink_set(mask, 100baseT_Full); ++ gswip_phylink_set_capab(supported, state); + +- bitmap_and(supported, supported, mask, +- __ETHTOOL_LINK_MODE_MASK_NBITS); +- bitmap_and(state->advertising, state->advertising, mask, +- __ETHTOOL_LINK_MODE_MASK_NBITS); + return; + + unsupported: + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + dev_err(ds->dev, "Unsupported interface '%s' for port %d\n", + phy_modes(state->interface), port); +- return; + } + + static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) +@@ -1639,6 +1687,9 @@ static void gswip_phylink_mac_config(str + case PHY_INTERFACE_MODE_RGMII_TXID: + miicfg |= GSWIP_MII_CFG_MODE_RGMII; + break; ++ case PHY_INTERFACE_MODE_GMII: ++ miicfg |= GSWIP_MII_CFG_MODE_GMII; ++ break; + default: + dev_err(ds->dev, + "Unsupported interface: %d\n", state->interface); +@@ -1765,7 +1816,7 @@ static int gswip_get_sset_count(struct d + return ARRAY_SIZE(gswip_rmon_cnt); + } + +-static const struct dsa_switch_ops gswip_switch_ops = { ++static const struct dsa_switch_ops gswip_xrx200_switch_ops = { + .get_tag_protocol = gswip_get_tag_protocol, + .setup = gswip_setup, + .port_enable = gswip_port_enable, +@@ -1781,7 +1832,31 @@ static const struct dsa_switch_ops gswip + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, +- .phylink_validate = gswip_phylink_validate, ++ .phylink_validate = gswip_xrx200_phylink_validate, ++ .phylink_mac_config = gswip_phylink_mac_config, ++ .phylink_mac_link_down = gswip_phylink_mac_link_down, ++ .phylink_mac_link_up = gswip_phylink_mac_link_up, ++ .get_strings = gswip_get_strings, ++ .get_ethtool_stats = gswip_get_ethtool_stats, ++ .get_sset_count = gswip_get_sset_count, ++}; ++ ++static const struct dsa_switch_ops gswip_xrx300_switch_ops = { ++ .get_tag_protocol = gswip_get_tag_protocol, ++ .setup = gswip_setup, ++ .port_enable = gswip_port_enable, ++ .port_disable = gswip_port_disable, ++ .port_bridge_join = gswip_port_bridge_join, ++ .port_bridge_leave = gswip_port_bridge_leave, ++ .port_fast_age = gswip_port_fast_age, ++ .port_vlan_filtering = gswip_port_vlan_filtering, ++ .port_vlan_add = gswip_port_vlan_add, ++ .port_vlan_del = gswip_port_vlan_del, ++ .port_stp_state_set = gswip_port_stp_state_set, ++ .port_fdb_add = gswip_port_fdb_add, ++ .port_fdb_del = gswip_port_fdb_del, ++ .port_fdb_dump = gswip_port_fdb_dump, ++ .phylink_validate = gswip_xrx300_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down, + .phylink_mac_link_up = gswip_phylink_mac_link_up, +@@ -2043,7 +2118,7 @@ static int gswip_probe(struct platform_d + priv->ds->dev = dev; + priv->ds->num_ports = priv->hw_info->max_ports; + priv->ds->priv = priv; +- priv->ds->ops = &gswip_switch_ops; ++ priv->ds->ops = priv->hw_info->ops; + priv->dev = dev; + version = gswip_switch_r(priv, GSWIP_VERSION); + +@@ -2127,10 +2202,19 @@ static int gswip_remove(struct platform_ + static const struct gswip_hw_info gswip_xrx200 = { + .max_ports = 7, + .cpu_port = 6, ++ .ops = &gswip_xrx200_switch_ops, ++}; ++ ++static const struct gswip_hw_info gswip_xrx300 = { ++ .max_ports = 7, ++ .cpu_port = 6, ++ .ops = &gswip_xrx300_switch_ops, + }; + + static const struct of_device_id gswip_of_match[] = { + { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 }, ++ { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 }, ++ { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 }, + {}, + }; + MODULE_DEVICE_TABLE(of, gswip_of_match); diff --git a/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch b/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch new file mode 100644 index 00000000000..9d968839107 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch @@ -0,0 +1,127 @@ +From c40bb4fedcd6b8b6a714da5dd466eb88ed2652d1 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Wed, 9 Mar 2022 00:04:57 +0100 +Subject: net: dsa: lantiq_gswip: enable jumbo frames on GSWIP + +This enables non-standard MTUs on a per-port basis, with the overall +frame size set based on the CPU port. + +When the MTU is not changed, this should have no effect. + +Long packets crash the switch with MTUs of greater than 2526, so the +maximum is limited for now. Medium packets are sometimes dropped (e.g. +TCP over 2477, UDP over 2516-2519, ICMP over 2526), Hence an MTU value +of 2400 seems safe. + +Signed-off-by: Thomas Nixon +Signed-off-by: Aleksander Jan Bajkowski +Link: https://lore.kernel.org/r/20220308230457.1599237-1-olek2@wp.pl +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/lantiq_gswip.c | 53 ++++++++++++++++++++++++++++++++++++++---- + 1 file changed, 49 insertions(+), 4 deletions(-) + +--- a/drivers/net/dsa/lantiq_gswip.c ++++ b/drivers/net/dsa/lantiq_gswip.c +@@ -213,6 +213,7 @@ + #define GSWIP_MAC_CTRL_0_GMII_MII 0x0001 + #define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002 + #define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC)) ++#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */ + #define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */ + + /* Ethernet Switch Fetch DMA Port Control Register */ +@@ -239,6 +240,15 @@ + + #define XRX200_GPHY_FW_ALIGN (16 * 1024) + ++/* Maximum packet size supported by the switch. In theory this should be 10240, ++ * but long packets currently cause lock-ups with an MTU of over 2526. Medium ++ * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP ++ * over 2526), hence an MTU value of 2400 seems safe. This issue only affects ++ * packet reception. This is probably caused by the PPA engine, which is on the ++ * RX part of the device. Packet transmission works properly up to 10240. ++ */ ++#define GSWIP_MAX_PACKET_LENGTH 2400 ++ + struct gswip_hw_info { + int max_ports; + int cpu_port; +@@ -858,10 +868,6 @@ static int gswip_setup(struct dsa_switch + gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS, + GSWIP_PCE_PCTRL_0p(cpu_port)); + +- gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, +- GSWIP_MAC_CTRL_2p(cpu_port)); +- gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN, +- GSWIP_MAC_FLEN); + gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD, + GSWIP_BM_QUEUE_GCTRL); + +@@ -878,6 +884,8 @@ static int gswip_setup(struct dsa_switch + return err; + } + ++ ds->mtu_enforcement_ingress = true; ++ + gswip_port_enable(ds, cpu_port, NULL); + return 0; + } +@@ -1472,6 +1480,39 @@ static void gswip_phylink_set_capab(unsi + __ETHTOOL_LINK_MODE_MASK_NBITS); + } + ++static int gswip_port_max_mtu(struct dsa_switch *ds, int port) ++{ ++ /* Includes 8 bytes for special header. */ ++ return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; ++} ++ ++static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) ++{ ++ struct gswip_priv *priv = ds->priv; ++ int cpu_port = priv->hw_info->cpu_port; ++ ++ /* CPU port always has maximum mtu of user ports, so use it to set ++ * switch frame size, including 8 byte special header. ++ */ ++ if (port == cpu_port) { ++ new_mtu += 8; ++ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN, ++ GSWIP_MAC_FLEN); ++ } ++ ++ /* Enable MLEN for ports with non-standard MTUs, including the special ++ * header on the CPU port added above. ++ */ ++ if (new_mtu != ETH_DATA_LEN) ++ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, ++ GSWIP_MAC_CTRL_2p(port)); ++ else ++ gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0, ++ GSWIP_MAC_CTRL_2p(port)); ++ ++ return 0; ++} ++ + static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +@@ -1832,6 +1873,8 @@ static const struct dsa_switch_ops gswip + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, ++ .port_change_mtu = gswip_port_change_mtu, ++ .port_max_mtu = gswip_port_max_mtu, + .phylink_validate = gswip_xrx200_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down, +@@ -1856,6 +1899,8 @@ static const struct dsa_switch_ops gswip + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, ++ .port_change_mtu = gswip_port_change_mtu, ++ .port_max_mtu = gswip_port_max_mtu, + .phylink_validate = gswip_xrx300_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down,