mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-13 22:23:38 +00:00
ramips: add support for YunCore FAP640
It is an in-wall 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A.
Specifications:
- SoC: MT7621AT (880MHz, 2 Cores)
- RAM: 128 MB
- Flash: 16 MB SPI
- Wi-Fi:
- MT7915DN + MT7905DAN: 2.4/5 GHz
- Ethernet: 5x1GiE via MT7530, 1xWAN with POE and 4xLAN
- UART: J4 (115200 baud)
- Pinout: [3V3] (TXD) (RXD) (GND)
- Power: 802.11af/at PoE;
- Bootloader: U-Boot
- Buttons:
- Reset
- LEDs:
- Status - RGB controlled by
- GPIO 14 LOW - green color
- GPIO 15 LOW- red color
- GPIO 16 LOW - blue color
- WAN - gren color, controlled by switch GPIO 12 LOW
- LAN1 - gren color, controlled by switch GPIO 9 HIGH
- LAN2 - gren color, controlled by switch GPIO 6 LOW
- LAN3 - gren color, controlled by switch GPIO 3 LOW
- LAN4 - gren color, controlled by switch GPIO 0 LOW
Installation:
OEM firmware is based on LEDE with custom UI and support standard sysupgrade
variant of firmware. However it requires "*.ubin" extension for sysupgrade file.
Always select "Factory reset" switch on upgrade to OpenWRT, otherwise
router will not boot.
MAC addresses with OEM firmware:
vendor source
lan factory 0x4 (label)
5g factory 0x4 (label)
2g label with flipped bits bit in 1-st byte and bits 5, 6, 7 in
4-th byte
Example
label: 44:xx:xx:b7:xx:xx
lan: 44:xx:xx:b7:xx:xx
2g 46:xx:xx:c7:xx:xx
5g 44:xx:xx:b7:xx:xx
Signed-off-by: Volodymyr Puiul <volodymyr.puiul@gmail.com>
This commit is contained in:
Volodymyr Puiul
Hauke Mehrtens
parent
cc8b8f1b41
commit
3d14c610e8
205
target/linux/ramips/dts/mt7621_yuncore_fap640.dts
Normal file
205
target/linux/ramips/dts/mt7621_yuncore_fap640.dts
Normal file
@ -0,0 +1,205 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "yuncore,fap640", "mediatek,mt7621-soc";
|
||||
model = "YunCore FAP640";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_blue;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_status_red;
|
||||
label-mac-device = &gmac0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_green: status_green {
|
||||
label = "green:status";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status_red: status_red {
|
||||
label = "red:status";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status_blue: status_blue {
|
||||
label = "blue:status";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "green:wan";
|
||||
gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "mt7530-0:04:link";
|
||||
};
|
||||
|
||||
lan1 {
|
||||
label = "green:lan1";
|
||||
gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mt7530-0:03:link";
|
||||
};
|
||||
|
||||
lan2 {
|
||||
label = "green:lan2";
|
||||
gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "mt7530-0:02:link";
|
||||
};
|
||||
|
||||
lan3 {
|
||||
label = "green:lan3";
|
||||
gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "mt7530-0:01:link";
|
||||
};
|
||||
|
||||
lan4 {
|
||||
label = "green:lan4";
|
||||
gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "mt7530-0:00:link";
|
||||
};
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "linux,wdt-gpio";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
hw_algo = "toggle";
|
||||
hw_margin_ms = <200>;
|
||||
always-running;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <80000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Bootloader";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "Config";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* range 0x40000 to 0x50000 is empty in vendor
|
||||
* firmware, so we do not use it either
|
||||
*/
|
||||
|
||||
factory: partition@50000 {
|
||||
label = "Factory";
|
||||
reg = <0x50000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@90000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x90000 0xf70000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
mediatek,disable-radar-background;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_0004>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
nvmem-cells = <&macaddr_factory_0004>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "jtag", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&factory {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_0004: macaddr@0004 {
|
||||
reg = <0x0004 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -2263,6 +2263,16 @@ define Device/yuncore_ax820
|
||||
endef
|
||||
TARGET_DEVICES += yuncore_ax820
|
||||
|
||||
define Device/yuncore_fap640
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
IMAGE_SIZE := 15808k
|
||||
DEVICE_VENDOR := YunCore
|
||||
DEVICE_MODEL := FAP640
|
||||
DEVICE_PACKAGES := kmod-mt7915e
|
||||
endef
|
||||
TARGET_DEVICES += yuncore_fap640
|
||||
|
||||
define Device/zbtlink_zbt-we1326
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
|
||||
@ -126,6 +126,11 @@ case "$board" in
|
||||
[ "$PHYNBR" = "1" ] && \
|
||||
macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
yuncore,fap640)
|
||||
hw_mac_addr="$(mtd_get_mac_binary Factory 0x4)"
|
||||
[ "$PHYNBR" = "0" ] && macaddr_setbit_la "$hw_mac_addr" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
zyxel,nwa50ax|\
|
||||
zyxel,nwa55axe)
|
||||
hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user