mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
bmips: add support for Comtrend VR-3025un
The Comtrend VR-3025un is a wifi gigabit router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 64 MB DDR - Flash: 8 MB parallel NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43222 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the antenna. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This commit is contained in:
Álvaro Fernández Rojas
parent
2b0b28f479
commit
3baa45fbd8
@ -10,6 +10,10 @@ observa,vh4032n)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
|
||||
;;
|
||||
comtrend,vr-3025un)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 iptv"
|
||||
;;
|
||||
netgear,dgnd3700-v1 |\
|
||||
netgear,dgnd3800b |\
|
||||
netgear,evg2000)
|
||||
|
||||
@ -4,6 +4,7 @@
|
||||
|
||||
case "$(board_name)" in
|
||||
comtrend,vr-3025u |\
|
||||
comtrend,vr-3025un |\
|
||||
netgear,evg2000 |\
|
||||
observa,vh4032n)
|
||||
mtd fixtrx firmware
|
||||
|
||||
182
target/linux/bmips/dts/bcm6368-comtrend-vr-3025un.dts
Normal file
182
target/linux/bmips/dts/bcm6368-comtrend-vr-3025un.dts
Normal file
@ -0,0 +1,182 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm6368.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Comtrend VR-3025un";
|
||||
compatible = "comtrend,vr-3025un", "brcm,bcm6368";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@2 {
|
||||
label = "green:dsl";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@5 {
|
||||
label = "green:internet";
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_power_green: led@22 {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_power_red: led@24 {
|
||||
label = "red:power";
|
||||
gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led@31 {
|
||||
label = "red:internet";
|
||||
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
bcm43222-sprom {
|
||||
compatible = "brcm,ssb-sprom";
|
||||
|
||||
pci-bus = <0>;
|
||||
pci-dev = <1>;
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
|
||||
brcm,sprom = "brcm/bcm43222-sprom.bin";
|
||||
brcm,sprom-fixups = <97 0xfeb3>,
|
||||
<98 0x1618>,
|
||||
<99 0xfab0>,
|
||||
<113 0xfed1>,
|
||||
<114 0x1609>,
|
||||
<115 0xfad9>;
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pflash {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cfe: partition@0 {
|
||||
label = "CFE";
|
||||
reg = <0x000000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
compatible = "brcm,bcm963xx-imagetag";
|
||||
label = "firmware";
|
||||
reg = <0x010000 0x7e0000>;
|
||||
};
|
||||
|
||||
partition@1fe0000 {
|
||||
label = "nvram";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ephy0_led &pinctrl_ephy1_led
|
||||
&pinctrl_ephy2_led &pinctrl_ephy3_led>;
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan1";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
|
||||
phy-handle = <&phy2>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan3";
|
||||
|
||||
phy-handle = <&phy3>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "iptv";
|
||||
|
||||
phy-handle = <&phy4>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cfe {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_cfe_6a0: macaddr@6a0 {
|
||||
reg = <0x6a0 0x6>;
|
||||
};
|
||||
};
|
||||
@ -14,6 +14,19 @@ define Device/comtrend_vr-3025u
|
||||
endef
|
||||
TARGET_DEVICES += comtrend_vr-3025u
|
||||
|
||||
define Device/comtrend_vr-3025un
|
||||
$(Device/bcm63xx-cfe)
|
||||
DEVICE_VENDOR := Comtrend
|
||||
DEVICE_MODEL := VR-3025un
|
||||
CHIP_ID := 6368
|
||||
CFE_BOARD_ID := 96368M-1341N
|
||||
FLASH_MB := 8
|
||||
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
||||
$(B43_PACKAGES) broadcom-43222-sprom \
|
||||
kmod-leds-gpio
|
||||
endef
|
||||
TARGET_DEVICES += comtrend_vr-3025un
|
||||
|
||||
define Device/netgear_dgnd3700-v1
|
||||
$(Device/bcm63xx-netgear)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
|
||||
Loading…
Reference in New Issue
Block a user