ramips: move the ethernet driver into a separate directory

Also clean up the Kconfig symbols.

SVN-Revision: 30670

target/linux/ramips/patches-3.2/103-ethernet.patch

@@ -1,30 +1,20 @@
---- a/drivers/net/Kconfig
+--- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/Kconfig
++++ b/drivers/net/ethernet/Kconfig
-@@ -277,6 +277,17 @@ source "drivers/net/plip/Kconfig"
+@@ -143,6 +143,7 @@ source "drivers/net/ethernet/packetengin
- 
+ source "drivers/net/ethernet/pasemi/Kconfig"
- source "drivers/net/ppp/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
- 
+ source "drivers/net/ethernet/racal/Kconfig"
-+config MIPS_RAMIPS_NET
++source "drivers/net/ethernet/ramips/Kconfig"
-+	tristate "Ethernet driver for rt288x/rt305x"
+ source "drivers/net/ethernet/realtek/Kconfig"
-+	depends on MIPS_RALINK
+ source "drivers/net/ethernet/renesas/Kconfig"
-+	select PHYLIB if (SOC_RT288X || SOC_RT3883)
+ source "drivers/net/ethernet/rdc/Kconfig"
-+	help
+--- a/drivers/net/ethernet/Makefile
-+	  This driver supports the etehrnet mac inside the ralink wisocs
++++ b/drivers/net/ethernet/Makefile
-+
+@@ -53,6 +53,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
-+config RAMIPS_ETH_DEBUG
+ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
-+	bool "Enable debug messages in the Ralink ethernet driver"
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
-+	depends on MIPS_RAMIPS_NET
+ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
-+
++obj-$(CONFIG_NET_RAMIPS) += ramips/
- source "drivers/net/slip/Kconfig"
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- 
+ obj-$(CONFIG_SH_ETH) += renesas/
- source "drivers/s390/net/Kconfig"
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -44,6 +44,7 @@ obj-$(CONFIG_PPP_SYNC_TTY) += ppp/
- obj-$(CONFIG_PPPOE) += ppp/
- obj-$(CONFIG_PPPOL2TP) += ppp/
- obj-$(CONFIG_PPTP) += ppp/
-+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
- obj-$(CONFIG_SLIP) += slip/
- obj-$(CONFIG_SLHC) += slip/
- obj-$(CONFIG_NET_SB1000) += sb1000.o

target/linux/ramips/rt288x/config-3.2

@@ -73,7 +73,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=4
 CONFIG_MIPS_MACHINE=y
 CONFIG_MIPS_MT_DISABLED=y
 CONFIG_MIPS_RALINK=y
-CONFIG_MIPS_RAMIPS_NET=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -81,6 +80,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RAMIPS=y
+# CONFIG_NET_RAMIPS_DEBUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
@@ -93,7 +94,6 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
 CONFIG_RALINK_RT288X=y
 # CONFIG_RALINK_RT305X is not set
 # CONFIG_RALINK_RT3883 is not set
-# CONFIG_RAMIPS_ETH_DEBUG is not set
 CONFIG_RAMIPS_WDT=y
 CONFIG_RT288X_MACH_F5D8235_V1=y
 CONFIG_RT288X_MACH_RT_N15=y

target/linux/ramips/rt305x/config-3.2

@@ -73,13 +73,14 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_MIPS_MACHINE=y
 CONFIG_MIPS_MT_DISABLED=y
 CONFIG_MIPS_RALINK=y
-CONFIG_MIPS_RAMIPS_NET=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RAMIPS=y
+# CONFIG_NET_RAMIPS_DEBUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
@@ -90,7 +91,6 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
 # CONFIG_RALINK_RT288X is not set
 CONFIG_RALINK_RT305X=y
 # CONFIG_RALINK_RT3883 is not set
-# CONFIG_RAMIPS_ETH_DEBUG is not set
 CONFIG_RAMIPS_WDT=y
 CONFIG_RT305X_MACH_ALL0256N=y
 CONFIG_RT305X_MACH_ARGUS_ATP52B=y

target/linux/ramips/rt3883/config-3.2

@@ -72,13 +72,14 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_MIPS_MACHINE=y
 CONFIG_MIPS_MT_DISABLED=y
 CONFIG_MIPS_RALINK=y
-CONFIG_MIPS_RAMIPS_NET=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RAMIPS=y
+# CONFIG_NET_RAMIPS_DEBUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PCI=y
 CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
@@ -92,7 +93,6 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
 # CONFIG_RALINK_RT288X is not set
 # CONFIG_RALINK_RT305X is not set
 CONFIG_RALINK_RT3883=y
-# CONFIG_RAMIPS_ETH_DEBUG is not set
 CONFIG_RAMIPS_WDT=y
 CONFIG_RT3883_MACH_RT_N56U=y
 CONFIG_RTL8366_SMI=y