mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-18 21:28:02 +00:00
ramips: mt76x8: Add support for Zbtlink ZBT-WE2426-B
The Zbtlink ZBT-WE2426-B is an indoor dual band WiFi router with 4 external non detachable antennas and 5 Fast Ethernet ports. Hardware of ZBT-WE2426-B: - SoC: MT7628AN - RAM: 64 MB (Winbond W9751G6K8-25) - Storage: 8 MB SPI flash (S25FL064K) - Ethernet: 5x 10/100 Mbps LAN1,LAN2,LAN3,LAN4 & WAN - Wireless: 2.4GHz: on SoC (802.11b/g/n) - Wireless: 5GHz: Mediatek MT7612EN (802.11n/ac) - LEDs: 8x - Buttons: 1x reset - USB: 1x 2.0 - MicroSD slot: 1x - Power: 9 VDC, 1 A - Uart: GND TX RX PWR - J1 on the PCB - Board silkscreen: "ZBT-WE2426-C V04" "2018-02-28" "CTT" "13 18" Backup the stock firmware, settings and calibration data: This router comes with PandoraBox OpenWrt firmware, so it is possible to get all MTD partitions using scp. Installation: - Using the bootloader web server. Hold the reset button while turning the power on. Upload the sysupgrade image on http://192.168.1.1. - Using the sysupgrade command in PandoraBox OpenWrt. LEDs: - LAN1,LAN2,LAN3,LAN4,WAN,WLAN2G use GPIO pins of the MT7628AN SoC (GPIOs 43,42,41,40,39,44) - WLAN5G uses pin of MT7612EN. - The POWER LED is directly connected to the VCC. It can be reconnected to the GPIO 37 of the MT7628AN SoC by resoldering SMD resistor on the PCB. Buttons: - The RESET button is connected to the GPIO 38 of the MT7628AN SoC. MAC addresses as verified by OEM firmware: use address source 2g *:b0 factory 0x4 (label) 5g *:b1 factory 0x8004 LAN *:b2 factory 0x28 WAN *:b3 factory 0x2e Signed-off-by: Vaclav Svoboda <svoboda@neng.cz> Link: https://github.com/openwrt/openwrt/pull/16927 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Vaclav Svoboda
Hauke Mehrtens
parent
6280b4abfb
commit
3a9752ea02
183
target/linux/ramips/dts/mt7628an_zbtlink_zbt-we2426-b.dts
Normal file
183
target/linux/ramips/dts/mt7628an_zbtlink_zbt-we2426-b.dts
Normal file
@ -0,0 +1,183 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "zbtlink,zbt-we2426-b", "mediatek,mt7628an-soc";
|
||||
model = "Zbtlink ZBT-WE2426-B";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_wlan;
|
||||
led-failsafe = &led_wlan;
|
||||
led-upgrade = &led_wlan;
|
||||
label-mac-device = &wmac;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan1 {
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <1>;
|
||||
};
|
||||
|
||||
lan2 {
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <2>;
|
||||
};
|
||||
|
||||
lan3 {
|
||||
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <3>;
|
||||
};
|
||||
|
||||
lan4 {
|
||||
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <4>;
|
||||
};
|
||||
|
||||
wan {
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
};
|
||||
|
||||
led_wlan: wlan2g {
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x400>;
|
||||
};
|
||||
|
||||
eeprom_factory_8000: eeprom@8000 {
|
||||
reg = <0x8000 0x200>;
|
||||
};
|
||||
|
||||
macaddr_factory_28: macaddr@28 {
|
||||
reg = <0x28 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2s", "refclk", "wdt", "p4led_an",
|
||||
"p3led_an", "p2led_an",
|
||||
"p1led_an", "p0led_an",
|
||||
"wled_an";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
nvmem-cells = <&eeprom_factory_8000>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
|
||||
led {
|
||||
led-sources = <2>;
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_factory_28>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x2f>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "okay";
|
||||
};
|
||||
@ -1158,6 +1158,14 @@ define Device/zbtlink_zbt-we1226
|
||||
endef
|
||||
TARGET_DEVICES += zbtlink_zbt-we1226
|
||||
|
||||
define Device/zbtlink_zbt-we2426-b
|
||||
IMAGE_SIZE := 7872k
|
||||
DEVICE_VENDOR := Zbtlink
|
||||
DEVICE_MODEL := ZBT-WE2426-B
|
||||
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
|
||||
endef
|
||||
TARGET_DEVICES += zbtlink_zbt-we2426-b
|
||||
|
||||
define Device/zyxel_keenetic-extra-ii
|
||||
IMAGE_SIZE := 29824k
|
||||
DEVICE_VENDOR := Zyxel
|
||||
|
||||
@ -186,6 +186,13 @@ zbtlink,zbt-we1226)
|
||||
ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x02"
|
||||
ucidef_set_led_switch "wan" "WAN" "green:wan" "switch0" "0x10"
|
||||
;;
|
||||
zbtlink,zbt-we2426-b)
|
||||
ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan1" "lan1" "green:lan-1" "switch0" "0x01"
|
||||
ucidef_set_led_switch "lan2" "lan2" "green:lan-2" "switch0" "0x02"
|
||||
ucidef_set_led_switch "lan3" "lan3" "green:lan-3" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan4" "lan4" "green:lan-4" "switch0" "0x08"
|
||||
;;
|
||||
zyxel,keenetic-extra-ii)
|
||||
ucidef_set_led_netdev "wifi_led" "wifi" "green:wifi" "wlan0"
|
||||
ucidef_set_led_switch "internet" "internet" "green:internet" "switch0" "0x01"
|
||||
|
||||
@ -148,7 +148,8 @@ ramips_setup_interfaces()
|
||||
netgear,r6020|\
|
||||
netgear,r6080|\
|
||||
netgear,r6120|\
|
||||
wavlink,wl-wn531a3)
|
||||
wavlink,wl-wn531a3|\
|
||||
zbtlink,zbt-we2426-b)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
|
||||
;;
|
||||
@ -244,7 +245,8 @@ ramips_setup_macs()
|
||||
hilink,hlk-7688a|\
|
||||
wavlink,wl-wn531a3|\
|
||||
wavlink,wl-wn577a2|\
|
||||
wavlink,wl-wn578a2)
|
||||
wavlink,wl-wn578a2|\
|
||||
zbtlink,zbt-we2426-b)
|
||||
wan_mac=$(mtd_get_mac_binary factory 0x2e)
|
||||
label_mac=$(mtd_get_mac_binary factory 0x4)
|
||||
;;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user