mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
ramips: add support for TP-Link TL-MR3420 v5
TP-Link TL-MR3420 v5 are simple N300 router with 5-port FE switch and non-detachable antennas. Its very similar to TP-Link TL-WR841N V13. Specification: - MT7628N/N (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - USB 2.0 Port - UART (J1) header on PCB (115200 8n1) - 8x LED, 2x button, power input switch Flash instruction: The only way to flash LEDE image in mr3420v5 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.225/24 and tftp server. 2. Rename "lede-ramips-mt7628-tplink_tl-mr3420-v5-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
This commit is contained in:
parent
8ca650b8ce
commit
39e9bfb181
@ -381,6 +381,12 @@ tl-wr841n-v13)
|
||||
ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
||||
;;
|
||||
tplink,tl-mr3420-v5)
|
||||
set_usb_led "$boardname:green:usb"
|
||||
set_wifi_led "$boardname:green:wlan"
|
||||
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
||||
;;
|
||||
u25awf-h1)
|
||||
set_wifi_led "u25awf:red:wifi"
|
||||
ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
|
||||
|
@ -173,6 +173,7 @@ ramips_setup_interfaces()
|
||||
mzk-wdpr|\
|
||||
rb750gr3|\
|
||||
rt-n14u|\
|
||||
tplink,tl-mr3420-v5|\
|
||||
tl-wr840n-v4|\
|
||||
tl-wr840n-v5|\
|
||||
tl-wr841n-v13|\
|
||||
|
@ -37,6 +37,7 @@ get_status_led() {
|
||||
nbg-419n2|\
|
||||
pwh2004|\
|
||||
r6220|\
|
||||
tplink,tl-mr3420-v5|\
|
||||
tl-wr840n-v4|\
|
||||
tl-wr840n-v5|\
|
||||
tl-wr841n-v13|\
|
||||
|
@ -240,6 +240,7 @@ platform_check_image() {
|
||||
c20i|\
|
||||
c50|\
|
||||
mr200|\
|
||||
tplink,tl-mr3420-v5|\
|
||||
tl-wr840n-v4|\
|
||||
tl-wr840n-v5|\
|
||||
tl-wr841n-v13)
|
||||
|
86
target/linux/ramips/dts/TL-MR3420V5.dts
Normal file
86
target/linux/ramips/dts/TL-MR3420V5.dts
Normal file
@ -0,0 +1,86 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "TL-WR84XN.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "tplink,tl-mr3420-v5", "mediatek,mt7628an-soc";
|
||||
model = "TP-Link TL-MR3420 v5";
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
label = "rfkill";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan {
|
||||
label = "tl-mr3420-v5:green:lan";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power {
|
||||
label = "tl-mr3420-v5:green:power";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "tl-mr3420-v5:green:usb";
|
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "tl-mr3420-v5:green:wan";
|
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "tl-mr3420-v5:amber:wan";
|
||||
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "tl-mr3420-v5:green:wlan";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "tl-mr3420-v5:green:wps";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "i2c", "i2s", "p2led_an", "refclk", "uart1", "wdt", "wled_an";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
@ -139,6 +139,20 @@ define Device/tl-wr841n-v13
|
||||
endef
|
||||
TARGET_DEVICES += tl-wr841n-v13
|
||||
|
||||
define Device/tplink_tl-mr3420-v5
|
||||
$(Device/tplink)
|
||||
DTS := TL-MR3420V5
|
||||
IMAGE_SIZE := 7808k
|
||||
DEVICE_TITLE := TP-Link TL-MR3420 v5
|
||||
TPLINK_FLASHLAYOUT := 8Mmtk
|
||||
TPLINK_HWID := 0x34200005
|
||||
TPLINK_HWREV := 0x5
|
||||
TPLINK_HWREVADD := 0x5
|
||||
TPLINK_HVERSION := 3
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-mr3420-v5
|
||||
|
||||
define Device/u7628-01-128M-16M
|
||||
DTS := U7628-01-128M-16M
|
||||
IMAGE_SIZE := 16064k
|
||||
|
Loading…
Reference in New Issue
Block a user