lantiq: split base-files into subtargets

This splits the device-dependent base-files into subtarget directories,
like done recently for ath79 and ramips. While this increases the
overall lines of codes, it will make the code per subtarget smaller
and easier to keep track of features and devices.

While at it, several variables at the top of 02_network are removed,
as they were never changed. The values are put directly into the
function calls where they are used.

Remove unneeded LED setup from 01_leds, and remove 01_leds entirely
for falcon subtarget (as it is not used there).

Applies alphabetic reordering to device cases in base-files.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Adrian Schmutzler 2019-12-17 01:15:35 +01:00
parent b070101c50
commit 355f0444f3
17 changed files with 533 additions and 224 deletions
target/linux/lantiq
ase/base-files
etc/board.d
lib/upgrade
falcon/base-files
etc/board.d
lib/upgrade
xrx200/base-files
xway/base-files
etc
board.d
hotplug.d/firmware
lib/upgrade
xway_legacy/base-files
etc/board.d
lib/upgrade

View File

@ -0,0 +1,32 @@
#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
#
. /lib/functions/leds.sh
. /lib/functions/uci-defaults.sh
board_config_update
led_dsl="$(get_dt_led dsl)"
[ -n "$led_dsl" ] && {
led_internet="$(get_dt_led internet)"
if [ -n "$led_internet" ]; then
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
else
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
fi
}
board=$(board_name)
case "$board" in
allnet,all0333cj)
ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
;;
esac
board_config_flush
exit 0

View File

@ -0,0 +1,52 @@
#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
. /lib/functions/lantiq.sh
board_config_update
annex="a"
lan_mac=""
wan_mac=""
board=$(board_name)
case "$board" in
allnet,all0333cj)
annex="b"
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0'
;;
netgear,dgn1000b)
annex="b"
ucidef_set_interface_lan 'eth0'
;;
*)
ucidef_set_interface_lan 'eth0'
;;
esac
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
if lantiq_is_vdsl_system; then
ucidef_add_vdsl_modem "$annex" "av"
else
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
fi
ucidef_set_interface_wan "dsl0" "pppoe"
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
board_config_flush
exit 0

View File

@ -0,0 +1,10 @@
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
platform_check_image() {
return 0
}
platform_do_upgrade() {
default_do_upgrade "$1"
}

View File

@ -0,0 +1,36 @@
#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
. /lib/functions/lantiq.sh
board_config_update
annex="a"
lan_mac=""
wan_mac=""
ucidef_set_interface_lan 'eth0'
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
if lantiq_is_vdsl_system; then
ucidef_add_vdsl_modem "$annex" "av"
else
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
fi
ucidef_set_interface_wan "dsl0" "pppoe"
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
board_config_flush
exit 0

View File

@ -0,0 +1,10 @@
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
platform_check_image() {
return 0
}
platform_do_upgrade() {
default_do_upgrade "$1"
}

View File

@ -1,7 +1,6 @@
#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
# based on ar71xx
#
. /lib/functions/leds.sh
@ -32,35 +31,9 @@ led_dsl="$(get_dt_led dsl)"
board=$(board_name)
case "$board" in
allnet,all0333cj)
ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
;;
arcadyan,arv4525pw)
ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
;;
arcadyan,arv7506pw11)
ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
;;
arcadyan,arv7519rw22)
ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1"
;;
arcadyan,arv752dpw22)
ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio"
;;
bt,homehub-v5a)
ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
;;
netgear,dm200)
ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0"
;;
avm,fritz3370-rev2-hynix|\
avm,fritz3370-rev2-micron)
ucidef_set_led_switch "lan" "LAN" "fritz3370:green:lan" "switch0" "0x17"
;;
zyxel,p-2812hnu-f1|\
zyxel,p-2812hnu-f3)
ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio"
;;
arcadyan,vgv7510kw22-nor|\
arcadyan,vgv7510kw22-brn)
ucidef_set_led_wlan "wifi" "wifi" "vgv7510kw22:green:wlan" "phy0radio"
@ -69,6 +42,13 @@ arcadyan,vgv7519-nor|\
arcadyan,vgv7519-brn)
ucidef_set_led_wlan "wifi" "wifi" "vgv7519:green:wireless" "phy0radio"
;;
avm,fritz3370-rev2-hynix|\
avm,fritz3370-rev2-micron)
ucidef_set_led_switch "lan" "LAN" "fritz3370:green:lan" "switch0" "0x17"
;;
bt,homehub-v5a)
ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
;;
buffalo,wbmr-300hpd)
ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08"
ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04"
@ -76,7 +56,12 @@ buffalo,wbmr-300hpd)
ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20"
ucidef_set_led_default "router" "router" "wbmr300:green:router" "1"
;;
*)
netgear,dm200)
ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0"
;;
zyxel,p-2812hnu-f1|\
zyxel,p-2812hnu-f3)
ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio"
;;
esac

View File

@ -9,132 +9,44 @@
board_config_update
vpi=1
vci=32
annex="a"
tone="av"
xfer_mode=""
encaps="llc"
payload="bridged"
lan_mac=""
wan_mac=""
interface_wan="dsl0"
board=$(board_name)
case "$board" in
audiocodes,mp-252)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
;;
allnet,all0333cj)
annex="b"
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0'
;;
arcadyan,arv4510pw)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
;;
arcadyan,arv4519pw|arcadyan,arv7510pw22|arcadyan,arv7518pw)
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
;;
arcadyan,arv4520pw)
annex="b"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
;;
arcadyan,arv4525pw|arcadyan,arv452cqw|arcadyan,arv7525pw|arcadyan,arv752dpw)
annex="b"
ucidef_set_interface_lan 'eth0'
;;
arcadyan,arv7506pw11)
annex="b"
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
;;
arcadyan,arv7519pw)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
;;
arcadyan,arv7519rw22)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1)
ucidef_add_switch "switch0" \
"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
;;
arcadyan,arv752dpw22|arcadyan,arv8539pw22)
annex="b"
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
;;
alphanetworks,asl56026)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
ucidef_add_switch "switch0"\
"2:lan" "3:lan" "6t@eth0"
;;
bt,homehub-v2b)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
arcadyan,arv7519rw22)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
;;
bt,homehub-v3a)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0'
;;
bt,homehub-v5a)
lan_mac=$(mtd_get_mac_binary_ubi caldata 0x110c)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
;;
netgear,dgn1000b)
annex="b"
ucidef_set_interface_lan 'eth0'
;;
netgear,dgn3500|netgear,dgn3500b)
arcadyan,vg3503j)
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
"2:lan:2" "4:lan:1" "6t@eth0"
;;
netgear,dm200)
lan_mac=$(mtd_get_mac_binary ART 0x0)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0'
arcadyan,vgv7510kw22-brn|\
arcadyan,vgv7510kw22-nor)
annex="b"
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
ucidef_add_switch "switch0" \
"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
;;
lantiq,easy80920-nand|lantiq,easy80920-nor)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
arcadyan,vgv7519-brn|\
arcadyan,vgv7519-nor)
wan_mac=$(mtd_get_mac_binary board_config 0x16)
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
;;
avm,fritz3370-rev2-hynix|\
avm,fritz3370-rev2-micron)
annex="b"
@ -143,21 +55,12 @@ avm,fritz3370-rev2-micron)
ucidef_add_switch "switch0" \
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
;;
avm,fritz7312|\
avm,fritz7320)
annex="b"
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
ucidef_set_interface_lan 'eth0'
;;
avm,fritz7360sl)
annex="b"
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
ucidef_add_switch "switch0" \
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
;;
avm,fritz7362sl)
annex="b"
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
@ -165,7 +68,6 @@ avm,fritz7362sl)
ucidef_add_switch "switch0" \
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
;;
avm,fritz7412)
tffsdev=$(find_mtd_chardev "nand-tffs")
annex="b"
@ -173,91 +75,64 @@ avm,fritz7412)
wan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n macdsl -o)
ucidef_set_interface_lan 'eth0'
;;
siemens,gigaset-sx76x)
annex="b"
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
;;
zte,h201l)
annex="b"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
;;
zyxel,p-2601hn)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
;;
zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3)
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
bt,homehub-v5a)
lan_mac=$(mtd_get_mac_binary_ubi caldata 0x110c)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
;;
tplink,tdw8970|tplink,tdw8980)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
ucidef_add_switch "switch0" \
"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
;;
arcadyan,vg3503j)
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"2:lan:2" "4:lan:1" "6t@eth0"
;;
tplink,vr200|tplink,vr200v)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1)
ucidef_add_switch "switch0" \
"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
;;
arcadyan,vgv7510kw22-nor|arcadyan,vgv7510kw22-brn)
annex="b"
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
ucidef_add_switch "switch0" \
"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
;;
arcadyan,vgv7519-nor|arcadyan,vgv7519-brn)
wan_mac=$(mtd_get_mac_binary board_config 0x16)
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
;;
buffalo,wbmr-hp-g300h)
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
;;
buffalo,wbmr-300hpd)
lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
wan_mac="$lan_mac"
ucidef_add_switch "switch0" \
"5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
;;
lantiq,easy80920-nand|\
lantiq,easy80920-nor)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
;;
netgear,dm200)
lan_mac=$(mtd_get_mac_binary ART 0x0)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0'
;;
tplink,tdw8970|\
tplink,tdw8980)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
ucidef_add_switch "switch0" \
"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
;;
tplink,vr200|\
tplink,vr200v)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1)
ucidef_add_switch "switch0" \
"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
;;
zyxel,p-2812hnu-f1|\
zyxel,p-2812hnu-f3)
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
;;
*)
ucidef_set_interface_lan 'eth0'
;;
esac
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl"
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
if lantiq_is_vdsl_system; then
ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
ucidef_add_vdsl_modem "$annex" "av"
else
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
fi
ucidef_set_interface_wan "$interface_wan" "pppoe"
ucidef_set_interface_wan "dsl0" "pppoe"
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"

View File

@ -1,5 +1,4 @@
#!/bin/sh
# Based on ar71xx 11-ath10k-caldata and 10-rt2x00-eeprom
[ -e /lib/firmware/$FIRMWARE ] && exit 0

View File

@ -0,0 +1,38 @@
#!/bin/sh
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions/caldata.sh
case "$FIRMWARE" in
"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
"ath9k-eeprom-pci-0000:01:00.0.bin" | \
"ath9k-eeprom-pci-0000:02:00.0.bin")
board=$(board_name)
case "$board" in
avm,fritz3370-rev2-hynix|\
avm,fritz3370-rev2-micron|\
avm,fritz7362sl)
caldata_extract_reverse "urlader" 0x1541 0x440
;;
avm,fritz7360sl)
caldata_extract "urlader" 0x985 0x1000
;;
avm,fritz7412)
/usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader")
;;
bt,homehub-v5a)
caldata_extract_ubi "caldata" 0x1000 0x1000
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c
;;
tplink,tdw8970|\
tplink,tdw8980)
caldata_extract "boardconfig" 0x21000 0x1000
;;
*)
caldata_die "board $board is not supported yet"
;;
esac
;;
esac

View File

@ -13,8 +13,6 @@ platform_do_upgrade() {
avm,fritz3370-rev2-micron|\
avm,fritz7362sl|\
avm,fritz7412|\
bt,homehub-v2b|\
bt,homehub-v3a|\
bt,homehub-v5a|\
zyxel,p-2812hnu-f1|\
zyxel,p-2812hnu-f3)

View File

@ -0,0 +1,44 @@
#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
#
. /lib/functions/leds.sh
. /lib/functions/uci-defaults.sh
board_config_update
led_wifi="$(get_dt_led wifi)"
[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
led_usb="$(get_dt_led usb)"
[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
led_usb2="$(get_dt_led usb2)"
[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
led_dsl="$(get_dt_led dsl)"
[ -n "$led_dsl" ] && {
led_internet="$(get_dt_led internet)"
if [ -n "$led_internet" ]; then
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
else
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
fi
}
board=$(board_name)
case "$board" in
arcadyan,arv7506pw11)
ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
;;
arcadyan,arv752dpw22)
ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio"
;;
esac
board_config_flush
exit 0

View File

@ -0,0 +1,122 @@
#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
. /lib/functions/lantiq.sh
board_config_update
annex="a"
lan_mac=""
wan_mac=""
board=$(board_name)
case "$board" in
arcadyan,arv4510pw)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
;;
arcadyan,arv4519pw|\
arcadyan,arv7510pw22|\
arcadyan,arv7518pw)
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
;;
arcadyan,arv7506pw11)
annex="b"
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
;;
arcadyan,arv7519pw)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
;;
arcadyan,arv7525pw|\
arcadyan,arv752dpw)
annex="b"
ucidef_set_interface_lan 'eth0'
;;
arcadyan,arv752dpw22|\
arcadyan,arv8539pw22)
annex="b"
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
;;
audiocodes,mp-252)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
;;
avm,fritz7312|\
avm,fritz7320)
annex="b"
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
ucidef_set_interface_lan 'eth0'
;;
bt,homehub-v2b)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
;;
bt,homehub-v3a)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0'
;;
buffalo,wbmr-hp-g300h)
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
;;
netgear,dgn3500|\
netgear,dgn3500b)
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
;;
siemens,gigaset-sx76x)
annex="b"
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
;;
zte,h201l)
annex="b"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
;;
zyxel,p-2601hn)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
;;
*)
ucidef_set_interface_lan 'eth0'
;;
esac
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
if lantiq_is_vdsl_system; then
ucidef_add_vdsl_modem "$annex" "av"
else
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
fi
ucidef_set_interface_wan "dsl0" "pppoe"
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
board_config_flush
exit 0

View File

@ -41,28 +41,13 @@ case "$FIRMWARE" in
caldata_extract_swap "art-copy" 0x0 0x1000
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 0x10c
;;
bt,homehub-v5a)
caldata_extract_ubi "caldata" 0x1000 0x1000
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c
;;
netgear,dgn3500|netgear,dgn3500b)
caldata_extract "calibration" 0xf000 0x1000
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 0x20c
;;
avm,fritz3370-rev2-hynix|\
avm,fritz3370-rev2-micron|\
avm,fritz7362sl)
caldata_extract_reverse "urlader" 0x1541 0x440
;;
avm,fritz7312|avm,fritz7320|avm,fritz7360sl)
avm,fritz7312|avm,fritz7320)
caldata_extract "urlader" 0x985 0x1000
;;
avm,fritz7412)
/usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader")
;;
tplink,tdw8970|tplink,tdw8980)
caldata_extract "boardconfig" 0x21000 0x1000
;;
*)
caldata_die "board $board is not supported yet"
;;

View File

@ -0,0 +1,20 @@
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
platform_check_image() {
return 0
}
platform_do_upgrade() {
local board=$(board_name)
case "$board" in
bt,homehub-v2b|\
bt,homehub-v3a)
nand_do_upgrade $1
;;
*)
default_do_upgrade "$1"
;;
esac
}

View File

@ -0,0 +1,41 @@
#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
#
. /lib/functions/leds.sh
. /lib/functions/uci-defaults.sh
board_config_update
led_wifi="$(get_dt_led wifi)"
[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
led_usb="$(get_dt_led usb)"
[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
led_usb2="$(get_dt_led usb2)"
[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
led_dsl="$(get_dt_led dsl)"
[ -n "$led_dsl" ] && {
led_internet="$(get_dt_led internet)"
if [ -n "$led_internet" ]; then
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
else
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
fi
}
board=$(board_name)
case "$board" in
arcadyan,arv4525pw)
ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
;;
esac
board_config_flush
exit 0

View File

@ -0,0 +1,52 @@
#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
. /lib/functions/lantiq.sh
board_config_update
annex="a"
lan_mac=""
wan_mac=""
board=$(board_name)
case "$board" in
arcadyan,arv4520pw)
annex="b"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
;;
arcadyan,arv4525pw|\
arcadyan,arv452cqw)
annex="b"
ucidef_set_interface_lan 'eth0'
;;
*)
ucidef_set_interface_lan 'eth0'
;;
esac
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
if lantiq_is_vdsl_system; then
ucidef_add_vdsl_modem "$annex" "av"
else
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
fi
ucidef_set_interface_wan "dsl0" "pppoe"
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
board_config_flush
exit 0

View File

@ -0,0 +1,10 @@
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
platform_check_image() {
return 0
}
platform_do_upgrade() {
default_do_upgrade "$1"
}