mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 05:38:00 +00:00
lantiq: split base-files into subtargets
This splits the device-dependent base-files into subtarget directories, like done recently for ath79 and ramips. While this increases the overall lines of codes, it will make the code per subtarget smaller and easier to keep track of features and devices. While at it, several variables at the top of 02_network are removed, as they were never changed. The values are put directly into the function calls where they are used. Remove unneeded LED setup from 01_leds, and remove 01_leds entirely for falcon subtarget (as it is not used there). Applies alphabetic reordering to device cases in base-files. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Adrian Schmutzler
parent
b070101c50
commit
355f0444f3
32
target/linux/lantiq/ase/base-files/etc/board.d/01_leds
Executable file
32
target/linux/lantiq/ase/base-files/etc/board.d/01_leds
Executable file
@ -0,0 +1,32 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
led_dsl="$(get_dt_led dsl)"
|
||||
[ -n "$led_dsl" ] && {
|
||||
led_internet="$(get_dt_led internet)"
|
||||
if [ -n "$led_internet" ]; then
|
||||
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
|
||||
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
|
||||
else
|
||||
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
|
||||
fi
|
||||
}
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
allnet,all0333cj)
|
||||
ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
52
target/linux/lantiq/ase/base-files/etc/board.d/02_network
Executable file
52
target/linux/lantiq/ase/base-files/etc/board.d/02_network
Executable file
@ -0,0 +1,52 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/lantiq.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
annex="a"
|
||||
|
||||
lan_mac=""
|
||||
wan_mac=""
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
allnet,all0333cj)
|
||||
annex="b"
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
netgear,dgn1000b)
|
||||
annex="b"
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
esac
|
||||
|
||||
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
||||
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
|
||||
|
||||
if lantiq_is_vdsl_system; then
|
||||
ucidef_add_vdsl_modem "$annex" "av"
|
||||
else
|
||||
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
||||
fi
|
||||
|
||||
ucidef_set_interface_wan "dsl0" "pppoe"
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
||||
10
target/linux/lantiq/ase/base-files/lib/upgrade/platform.sh
Executable file
10
target/linux/lantiq/ase/base-files/lib/upgrade/platform.sh
Executable file
@ -0,0 +1,10 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
default_do_upgrade "$1"
|
||||
}
|
||||
36
target/linux/lantiq/falcon/base-files/etc/board.d/02_network
Executable file
36
target/linux/lantiq/falcon/base-files/etc/board.d/02_network
Executable file
@ -0,0 +1,36 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/lantiq.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
annex="a"
|
||||
|
||||
lan_mac=""
|
||||
wan_mac=""
|
||||
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
|
||||
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
||||
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
|
||||
|
||||
if lantiq_is_vdsl_system; then
|
||||
ucidef_add_vdsl_modem "$annex" "av"
|
||||
else
|
||||
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
||||
fi
|
||||
|
||||
ucidef_set_interface_wan "dsl0" "pppoe"
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
||||
10
target/linux/lantiq/falcon/base-files/lib/upgrade/platform.sh
Executable file
10
target/linux/lantiq/falcon/base-files/lib/upgrade/platform.sh
Executable file
@ -0,0 +1,10 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
default_do_upgrade "$1"
|
||||
}
|
||||
@ -1,7 +1,6 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
# based on ar71xx
|
||||
#
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
@ -32,35 +31,9 @@ led_dsl="$(get_dt_led dsl)"
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
allnet,all0333cj)
|
||||
ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
|
||||
;;
|
||||
arcadyan,arv4525pw)
|
||||
ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
|
||||
;;
|
||||
arcadyan,arv7506pw11)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
|
||||
;;
|
||||
arcadyan,arv7519rw22)
|
||||
ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1"
|
||||
;;
|
||||
arcadyan,arv752dpw22)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio"
|
||||
;;
|
||||
bt,homehub-v5a)
|
||||
ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
|
||||
;;
|
||||
netgear,dm200)
|
||||
ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0"
|
||||
;;
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron)
|
||||
ucidef_set_led_switch "lan" "LAN" "fritz3370:green:lan" "switch0" "0x17"
|
||||
;;
|
||||
zyxel,p-2812hnu-f1|\
|
||||
zyxel,p-2812hnu-f3)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio"
|
||||
;;
|
||||
arcadyan,vgv7510kw22-nor|\
|
||||
arcadyan,vgv7510kw22-brn)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "vgv7510kw22:green:wlan" "phy0radio"
|
||||
@ -69,6 +42,13 @@ arcadyan,vgv7519-nor|\
|
||||
arcadyan,vgv7519-brn)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "vgv7519:green:wireless" "phy0radio"
|
||||
;;
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron)
|
||||
ucidef_set_led_switch "lan" "LAN" "fritz3370:green:lan" "switch0" "0x17"
|
||||
;;
|
||||
bt,homehub-v5a)
|
||||
ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
|
||||
;;
|
||||
buffalo,wbmr-300hpd)
|
||||
ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04"
|
||||
@ -76,7 +56,12 @@ buffalo,wbmr-300hpd)
|
||||
ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20"
|
||||
ucidef_set_led_default "router" "router" "wbmr300:green:router" "1"
|
||||
;;
|
||||
*)
|
||||
netgear,dm200)
|
||||
ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0"
|
||||
;;
|
||||
zyxel,p-2812hnu-f1|\
|
||||
zyxel,p-2812hnu-f3)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio"
|
||||
;;
|
||||
esac
|
||||
|
||||
@ -9,132 +9,44 @@
|
||||
|
||||
board_config_update
|
||||
|
||||
vpi=1
|
||||
vci=32
|
||||
annex="a"
|
||||
tone="av"
|
||||
xfer_mode=""
|
||||
encaps="llc"
|
||||
payload="bridged"
|
||||
|
||||
lan_mac=""
|
||||
wan_mac=""
|
||||
interface_wan="dsl0"
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
audiocodes,mp-252)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
||||
;;
|
||||
|
||||
allnet,all0333cj)
|
||||
annex="b"
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
|
||||
arcadyan,arv4510pw)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
|
||||
;;
|
||||
|
||||
arcadyan,arv4519pw|arcadyan,arv7510pw22|arcadyan,arv7518pw)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
||||
;;
|
||||
|
||||
arcadyan,arv4520pw)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
||||
;;
|
||||
|
||||
arcadyan,arv4525pw|arcadyan,arv452cqw|arcadyan,arv7525pw|arcadyan,arv752dpw)
|
||||
annex="b"
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
|
||||
arcadyan,arv7506pw11)
|
||||
annex="b"
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
||||
;;
|
||||
|
||||
arcadyan,arv7519pw)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
||||
;;
|
||||
|
||||
arcadyan,arv7519rw22)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
|
||||
;;
|
||||
|
||||
arcadyan,arv752dpw22|arcadyan,arv8539pw22)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
||||
;;
|
||||
|
||||
alphanetworks,asl56026)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
|
||||
ucidef_add_switch "switch0"\
|
||||
"2:lan" "3:lan" "6t@eth0"
|
||||
;;
|
||||
|
||||
bt,homehub-v2b)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
arcadyan,arv7519rw22)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
|
||||
"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
|
||||
;;
|
||||
|
||||
bt,homehub-v3a)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
|
||||
bt,homehub-v5a)
|
||||
lan_mac=$(mtd_get_mac_binary_ubi caldata 0x110c)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
||||
;;
|
||||
|
||||
netgear,dgn1000b)
|
||||
annex="b"
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
|
||||
netgear,dgn3500|netgear,dgn3500b)
|
||||
arcadyan,vg3503j)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
||||
"2:lan:2" "4:lan:1" "6t@eth0"
|
||||
;;
|
||||
|
||||
netgear,dm200)
|
||||
lan_mac=$(mtd_get_mac_binary ART 0x0)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
arcadyan,vgv7510kw22-brn|\
|
||||
arcadyan,vgv7510kw22-nor)
|
||||
annex="b"
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
|
||||
ucidef_add_switch "switch0" \
|
||||
"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
|
||||
;;
|
||||
|
||||
lantiq,easy80920-nand|lantiq,easy80920-nor)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
arcadyan,vgv7519-brn|\
|
||||
arcadyan,vgv7519-nor)
|
||||
wan_mac=$(mtd_get_mac_binary board_config 0x16)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
||||
;;
|
||||
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron)
|
||||
annex="b"
|
||||
@ -143,21 +55,12 @@ avm,fritz3370-rev2-micron)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
||||
;;
|
||||
|
||||
avm,fritz7312|\
|
||||
avm,fritz7320)
|
||||
annex="b"
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
|
||||
avm,fritz7360sl)
|
||||
annex="b"
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
||||
;;
|
||||
|
||||
avm,fritz7362sl)
|
||||
annex="b"
|
||||
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
|
||||
@ -165,7 +68,6 @@ avm,fritz7362sl)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
||||
;;
|
||||
|
||||
avm,fritz7412)
|
||||
tffsdev=$(find_mtd_chardev "nand-tffs")
|
||||
annex="b"
|
||||
@ -173,91 +75,64 @@ avm,fritz7412)
|
||||
wan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n macdsl -o)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
|
||||
siemens,gigaset-sx76x)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
||||
;;
|
||||
|
||||
zte,h201l)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
||||
;;
|
||||
|
||||
zyxel,p-2601hn)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
|
||||
;;
|
||||
|
||||
zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
||||
bt,homehub-v5a)
|
||||
lan_mac=$(mtd_get_mac_binary_ubi caldata 0x110c)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
|
||||
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
||||
;;
|
||||
|
||||
tplink,tdw8970|tplink,tdw8980)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
|
||||
;;
|
||||
|
||||
arcadyan,vg3503j)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"2:lan:2" "4:lan:1" "6t@eth0"
|
||||
;;
|
||||
|
||||
tplink,vr200|tplink,vr200v)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
|
||||
;;
|
||||
|
||||
arcadyan,vgv7510kw22-nor|arcadyan,vgv7510kw22-brn)
|
||||
annex="b"
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
|
||||
ucidef_add_switch "switch0" \
|
||||
"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
|
||||
;;
|
||||
|
||||
arcadyan,vgv7519-nor|arcadyan,vgv7519-brn)
|
||||
wan_mac=$(mtd_get_mac_binary board_config 0x16)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
||||
;;
|
||||
|
||||
buffalo,wbmr-hp-g300h)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
||||
;;
|
||||
|
||||
buffalo,wbmr-300hpd)
|
||||
lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
|
||||
wan_mac="$lan_mac"
|
||||
ucidef_add_switch "switch0" \
|
||||
"5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
|
||||
;;
|
||||
|
||||
lantiq,easy80920-nand|\
|
||||
lantiq,easy80920-nor)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
||||
;;
|
||||
netgear,dm200)
|
||||
lan_mac=$(mtd_get_mac_binary ART 0x0)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
tplink,tdw8970|\
|
||||
tplink,tdw8980)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
|
||||
;;
|
||||
tplink,vr200|\
|
||||
tplink,vr200v)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
|
||||
;;
|
||||
zyxel,p-2812hnu-f1|\
|
||||
zyxel,p-2812hnu-f3)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
|
||||
esac
|
||||
|
||||
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
||||
ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl"
|
||||
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
|
||||
|
||||
if lantiq_is_vdsl_system; then
|
||||
ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
|
||||
ucidef_add_vdsl_modem "$annex" "av"
|
||||
else
|
||||
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
||||
fi
|
||||
|
||||
ucidef_set_interface_wan "$interface_wan" "pppoe"
|
||||
ucidef_set_interface_wan "dsl0" "pppoe"
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
||||
@ -1,5 +1,4 @@
|
||||
#!/bin/sh
|
||||
# Based on ar71xx 11-ath10k-caldata and 10-rt2x00-eeprom
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
@ -0,0 +1,38 @@
|
||||
#!/bin/sh
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
. /lib/functions/caldata.sh
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
|
||||
"ath9k-eeprom-pci-0000:01:00.0.bin" | \
|
||||
"ath9k-eeprom-pci-0000:02:00.0.bin")
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron|\
|
||||
avm,fritz7362sl)
|
||||
caldata_extract_reverse "urlader" 0x1541 0x440
|
||||
;;
|
||||
avm,fritz7360sl)
|
||||
caldata_extract "urlader" 0x985 0x1000
|
||||
;;
|
||||
avm,fritz7412)
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader")
|
||||
;;
|
||||
bt,homehub-v5a)
|
||||
caldata_extract_ubi "caldata" 0x1000 0x1000
|
||||
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c
|
||||
;;
|
||||
tplink,tdw8970|\
|
||||
tplink,tdw8980)
|
||||
caldata_extract "boardconfig" 0x21000 0x1000
|
||||
;;
|
||||
*)
|
||||
caldata_die "board $board is not supported yet"
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
@ -13,8 +13,6 @@ platform_do_upgrade() {
|
||||
avm,fritz3370-rev2-micron|\
|
||||
avm,fritz7362sl|\
|
||||
avm,fritz7412|\
|
||||
bt,homehub-v2b|\
|
||||
bt,homehub-v3a|\
|
||||
bt,homehub-v5a|\
|
||||
zyxel,p-2812hnu-f1|\
|
||||
zyxel,p-2812hnu-f3)
|
||||
44
target/linux/lantiq/xway/base-files/etc/board.d/01_leds
Executable file
44
target/linux/lantiq/xway/base-files/etc/board.d/01_leds
Executable file
@ -0,0 +1,44 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
led_wifi="$(get_dt_led wifi)"
|
||||
[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
|
||||
|
||||
led_usb="$(get_dt_led usb)"
|
||||
[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
|
||||
|
||||
led_usb2="$(get_dt_led usb2)"
|
||||
[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
|
||||
|
||||
led_dsl="$(get_dt_led dsl)"
|
||||
[ -n "$led_dsl" ] && {
|
||||
led_internet="$(get_dt_led internet)"
|
||||
if [ -n "$led_internet" ]; then
|
||||
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
|
||||
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
|
||||
else
|
||||
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
|
||||
fi
|
||||
}
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,arv7506pw11)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
|
||||
;;
|
||||
arcadyan,arv752dpw22)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
122
target/linux/lantiq/xway/base-files/etc/board.d/02_network
Executable file
122
target/linux/lantiq/xway/base-files/etc/board.d/02_network
Executable file
@ -0,0 +1,122 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/lantiq.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
annex="a"
|
||||
|
||||
lan_mac=""
|
||||
wan_mac=""
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,arv4510pw)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
|
||||
;;
|
||||
arcadyan,arv4519pw|\
|
||||
arcadyan,arv7510pw22|\
|
||||
arcadyan,arv7518pw)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
||||
;;
|
||||
arcadyan,arv7506pw11)
|
||||
annex="b"
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
||||
;;
|
||||
arcadyan,arv7519pw)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
||||
;;
|
||||
arcadyan,arv7525pw|\
|
||||
arcadyan,arv752dpw)
|
||||
annex="b"
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
arcadyan,arv752dpw22|\
|
||||
arcadyan,arv8539pw22)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
||||
;;
|
||||
audiocodes,mp-252)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
||||
;;
|
||||
avm,fritz7312|\
|
||||
avm,fritz7320)
|
||||
annex="b"
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
bt,homehub-v2b)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
|
||||
;;
|
||||
bt,homehub-v3a)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
buffalo,wbmr-hp-g300h)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
||||
;;
|
||||
netgear,dgn3500|\
|
||||
netgear,dgn3500b)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
||||
;;
|
||||
siemens,gigaset-sx76x)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
||||
;;
|
||||
zte,h201l)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
||||
;;
|
||||
zyxel,p-2601hn)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
esac
|
||||
|
||||
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
||||
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
|
||||
|
||||
if lantiq_is_vdsl_system; then
|
||||
ucidef_add_vdsl_modem "$annex" "av"
|
||||
else
|
||||
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
||||
fi
|
||||
|
||||
ucidef_set_interface_wan "dsl0" "pppoe"
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
||||
@ -41,28 +41,13 @@ case "$FIRMWARE" in
|
||||
caldata_extract_swap "art-copy" 0x0 0x1000
|
||||
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 0x10c
|
||||
;;
|
||||
bt,homehub-v5a)
|
||||
caldata_extract_ubi "caldata" 0x1000 0x1000
|
||||
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c
|
||||
;;
|
||||
netgear,dgn3500|netgear,dgn3500b)
|
||||
caldata_extract "calibration" 0xf000 0x1000
|
||||
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 0x20c
|
||||
;;
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron|\
|
||||
avm,fritz7362sl)
|
||||
caldata_extract_reverse "urlader" 0x1541 0x440
|
||||
;;
|
||||
avm,fritz7312|avm,fritz7320|avm,fritz7360sl)
|
||||
avm,fritz7312|avm,fritz7320)
|
||||
caldata_extract "urlader" 0x985 0x1000
|
||||
;;
|
||||
avm,fritz7412)
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader")
|
||||
;;
|
||||
tplink,tdw8970|tplink,tdw8980)
|
||||
caldata_extract "boardconfig" 0x21000 0x1000
|
||||
;;
|
||||
*)
|
||||
caldata_die "board $board is not supported yet"
|
||||
;;
|
||||
20
target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh
Executable file
20
target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh
Executable file
@ -0,0 +1,20 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
bt,homehub-v2b|\
|
||||
bt,homehub-v3a)
|
||||
nand_do_upgrade $1
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
41
target/linux/lantiq/xway_legacy/base-files/etc/board.d/01_leds
Executable file
41
target/linux/lantiq/xway_legacy/base-files/etc/board.d/01_leds
Executable file
@ -0,0 +1,41 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
led_wifi="$(get_dt_led wifi)"
|
||||
[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
|
||||
|
||||
led_usb="$(get_dt_led usb)"
|
||||
[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
|
||||
|
||||
led_usb2="$(get_dt_led usb2)"
|
||||
[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
|
||||
|
||||
led_dsl="$(get_dt_led dsl)"
|
||||
[ -n "$led_dsl" ] && {
|
||||
led_internet="$(get_dt_led internet)"
|
||||
if [ -n "$led_internet" ]; then
|
||||
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
|
||||
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
|
||||
else
|
||||
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
|
||||
fi
|
||||
}
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,arv4525pw)
|
||||
ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
52
target/linux/lantiq/xway_legacy/base-files/etc/board.d/02_network
Executable file
52
target/linux/lantiq/xway_legacy/base-files/etc/board.d/02_network
Executable file
@ -0,0 +1,52 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/lantiq.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
annex="a"
|
||||
|
||||
lan_mac=""
|
||||
wan_mac=""
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,arv4520pw)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
||||
;;
|
||||
arcadyan,arv4525pw|\
|
||||
arcadyan,arv452cqw)
|
||||
annex="b"
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
esac
|
||||
|
||||
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
||||
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
|
||||
|
||||
if lantiq_is_vdsl_system; then
|
||||
ucidef_add_vdsl_modem "$annex" "av"
|
||||
else
|
||||
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
||||
fi
|
||||
|
||||
ucidef_set_interface_wan "dsl0" "pppoe"
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
||||
10
target/linux/lantiq/xway_legacy/base-files/lib/upgrade/platform.sh
Executable file
10
target/linux/lantiq/xway_legacy/base-files/lib/upgrade/platform.sh
Executable file
@ -0,0 +1,10 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
default_do_upgrade "$1"
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user