mediatek: filogic: asus-rt-ax59u: use NVMEM-on-UBI

Use newly added support for NVMEM-on-UBI instead of extracting MAC
address and WiFi EEPROM data in userspace.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

target/linux/mediatek/dts/mt7986a-asus-rt-ax59u.dts

@@ -14,6 +14,7 @@
 
 	aliases {
 		serial0 = &uart0;
+		label-mac-device = &gmac0;
 		led-boot = &led_status_green;
 		led-failsafe = &led_status_red;
 		led-running = &led_status_green;
@@ -22,7 +23,7 @@
 
 	chosen {
 		stdout-path = "serial0:115200n8";
-		bootargs-override = "ubi.mtd=UBI_DEV";
+		bootargs-override = "";
 	};
 
 	memory {
@@ -89,6 +90,8 @@
 		/* LAN */
 		compatible = "mediatek,eth-mac";
 		reg = <0>;
+		nvmem-cells = <&macaddr_factory_4>;
+		nvmem-cell-names = "mac-address";
 		phy-mode = "2500base-x";
 
 		fixed-link {
@@ -206,44 +209,87 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	status = "okay";
 
-	spi_nand: spi_nand@0 {
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
+		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0>;
 
 		spi-max-frequency = <20000000>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 
-		partitions: partitions {
+		/*
+		 * ASUS bootloader tries to replace the partitions defined in
+		 * Device Tree and by that also deletes all additional properties
+		 * needed for UBI and NVMEM-on-UBI.
+		 * Prevent this from happening by tricking the loader to delete and
+		 * replace a bait node instead.
+		 */
+		partitions: dummy {
+			compatible = "u-boot-dummy-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x0>;
+				label = "remove_me";
+			};
+		};
+
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
 
 			partition@0 {
-				label = "u-boot";
 				reg = <0x0 0x400000>;
+				label = "u-boot";
 				read-only;
 			};
 
 			partition@400000 {
+				compatible = "linux,ubi";
+				reg = <0x400000 0xfc00000>;
 				label = "UBI_DEV";
-				reg = <0x400000 0x7c00000>;
+
+				volumes {
+					ubi_factory: ubi-volume-factory {
+						volname = "Factory";
+					};
+				};
 			};
 		};
 	};
 };
 
+&ubi_factory {
+	nvmem-layout {
+		compatible = "fixed-layout";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eeprom_factory_0: eeprom@0 {
+			reg = <0x0 0x1000>;
+		};
+
+		macaddr_factory_4: macaddr@4 {
+			reg = <0x4 0x6>;
+		};
+	};
+};
+
 &watchdog {
 	status = "okay";
 };
 
 &wifi {
-	status = "okay";
+	nvmem-cells = <&eeprom_factory_0>;
-	pinctrl-names = "default", "dbdc";
+	nvmem-cell-names = "eeprom";
 	pinctrl-0 = <&wf_2g_5g_pins>;
 	pinctrl-1 = <&wf_dbdc_pins>;
+	pinctrl-names = "default", "dbdc";
+	status = "okay";
 };
 
 &trng {

target/linux/mediatek/filogic/base-files/etc/board.d/02_network

@@ -109,7 +109,6 @@ mediatek_setup_macs()
 	local label_mac=""
 
 	case $board in
-	asus,rt-ax59u|\
 	asus,tuf-ax4200|\
 	asus,tuf-ax6000)
 		CI_UBIPART="UBI_DEV"

target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata

@@ -59,7 +59,6 @@ case "$FIRMWARE" in
 	;;
 "mediatek/mt7986_eeprom_mt7976_dbdc.bin")
 	case "$board" in
-	asus,rt-ax59u|\
 	asus,tuf-ax4200)
 		CI_UBIPART="UBI_DEV"
 		caldata_extract_ubi "Factory" 0x0 0x1000