From 2d465fbf570e1f3286210305a26580cd417fec7c Mon Sep 17 00:00:00 2001 From: David Lutz Date: Tue, 5 Nov 2024 10:55:43 +0100 Subject: [PATCH] ath79: Add support for Sophos AP15C The Sophos AP15C uses the same hardware as the AP15, but has a reset button. Based on: commit 6f1efb289837 ("ath79: add support for Sophos AP100/AP55 family") author Andrew Powers-Holmes Fri, 3 Sep 2021 15:53:57 +0200 (23:53 +1000) committer Hauke Mehrtens Sat, 16 Apr 2022 16:59:29 +0200 (16:59 +0200) Unique to AP15C: - Reset button - External RJ45 serial console port Flashing instructions: This firmware can be flashed either via a compatible Sophos SG or XG firewall appliance, which does not require disassembling the device, or via the U-Boot console available on the internal UART header. To flash via XG appliance: - Register on Sophos' website for a no-cost Home Use XG firewall license - Download and install the XG software on a compatible PC or virtual machine, complete initial appliance setup, and enable SSH console access - Connect the target AP device to the XG appliance's LAN interface - Approve the AP from the XG Web UI and wait until it shows as Active (this can take 3-5 minutes) - Connect to the XG appliance over SSH and access the Advanced Console (Menu option 5, then menu option 3) - Run `sudo awetool` and select the menu option to connect to an AP via SSH. When prompted to enable SSH on the target AP, select Yes. - Wait 2-3 minutes, then select the AP from the awetool menu again. This will connect you to a root shell on the target AP. - Copy the firmware to /tmp/openwrt.bin on the target AP via SCP/TFTP/etc - Run `mtd -r write /tmp/openwrt.bin astaro_image` - When complete, the access point will reboot to OpenWRT. To flash via U-Boot serial console: - Configure a TFTP server on your PC, and set IP address 192.168.99.8 with netmask 255.255.255.0 - Copy the firmware .bin to the TFTP server and rename to 'uImage_AP15C' - Open the target AP's enclosure and locate the 4-pin 3.3V UART header [4] - Connect the AP ethernet to your PC's ethernet port - Connect a terminal to the UART at 115200 8/N/1 as usual - Power on the AP and press a key to cancel autoboot when prompted - Run the following commands at the U-Boot console: - `tftpboot` - `cp.b $fileaddr 0x9f070000 $filesize` - `boot` - The access point will boot to OpenWRT. Signed-off-by: David Lutz (cherry picked from commit a7abc7ec3b61be553f33c49e5acc90a4d539d992) --- package/boot/uboot-envtools/files/ath79 | 1 + .../linux/ath79/dts/qca9557_sophos_ap15c.dts | 159 ++++++++++++++++++ .../generic/base-files/etc/board.d/02_network | 1 + target/linux/ath79/image/generic.mk | 8 + 4 files changed, 169 insertions(+) create mode 100644 target/linux/ath79/dts/qca9557_sophos_ap15c.dts diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index 1d9d3bcfaa1..c6d23ce73dc 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -163,6 +163,7 @@ ruckus,zf7372) ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x40000" "0x10000" ;; sophos,ap15|\ +sophos,ap15c|\ sophos,ap55|\ sophos,ap55c|\ sophos,ap100|\ diff --git a/target/linux/ath79/dts/qca9557_sophos_ap15c.dts b/target/linux/ath79/dts/qca9557_sophos_ap15c.dts new file mode 100644 index 00000000000..68d02e97a54 --- /dev/null +++ b/target/linux/ath79/dts/qca9557_sophos_ap15c.dts @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca955x.dtsi" + +#include +#include +#include + +/ { + compatible = "sophos,ap15c", "qca,qca9557"; + model = "Sophos AP15C"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_yellow; + led-running = &led_status_green; + led-upgrade = &led_status_yellow; + label-mac-device = ð0; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: status_green { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led_status_yellow: status_yellow { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@50000 { + label = "art"; + reg = <0x050000 0x010000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + cal_art_1000: calibration@1000 { + reg = <0x1000 0x440>; + }; + }; + }; + + partition@60000 { + label = "config"; + reg = <0x060000 0x010000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_config_201a: macaddr@201a { + reg = <0x201a 0x6>; + }; + }; + }; + + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x070000 0xf90000>; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0x10>; + + phy4: ethernet-phy@4 { + reg = <4>; + eee-broken-100tx; + eee-broken-1000t; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0xa6000000 0xa0000101 0xa0001313>; + + nvmem-cells = <&macaddr_config_201a>; + nvmem-cell-names = "mac-address"; + + phy-mode = "rgmii-id"; + phy-handle = <&phy4>; + + gmac_config: gmac-config { + device = <&gmac>; + + rgmii-enabled = <1>; + + rxdv-delay = <3>; + rxd-delay = <3>; + txen-delay = <3>; + txd-delay = <3>; + }; +}; + +&wmac { + status = "okay"; + + nvmem-cells = <&cal_art_1000>; + nvmem-cell-names = "calibration"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 8474c1c4c2d..8f79a3fad81 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -76,6 +76,7 @@ ath79_setup_interfaces() ruckus,zf7351|\ siemens,ws-ap3610|\ sophos,ap15|\ + sophos,ap15c|\ sophos,ap55|\ sophos,ap55c|\ sophos,ap100|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index c075f050db2..0173f5cb161 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -2972,6 +2972,14 @@ define Device/sophos_ap15 endef TARGET_DEVICES += sophos_ap15 +define Device/sophos_ap15c + SOC := qca9557 + DEVICE_VENDOR := Sophos + DEVICE_MODEL := AP15C + IMAGE_SIZE := 15936k +endef +TARGET_DEVICES += sophos_ap15c + define Device/sophos_ap55 SOC := qca9558 DEVICE_VENDOR := Sophos