mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-09 12:22:00 +00:00
mediatek: filogic: add Asus ZenWiFi BT8
Hardware -------- MediaTek MT7988D SoC (3x Cortex-A73 @1.8 GHz max) 1GB DDR4 RAM 128MB SPI-NAND (Winbond) MediaTek MT7996 BE14000 Tri-Band Wi-Fi 7 3x LAN (2x 1GE MT7988 built-in, 1x 2.5GE MaxLinear GPY211C) 1x WAN (2.5GE MT7988 built-in) LED: RGB PWM (supported as 3x PWM LED) USB: 1x USB 3 Buttons: RESET, WPS UART: 115200 8N1 3.3V Installation ------------ 1. Hold down RESET button and power on the device until LED pulses red. 2. Assign IP 192.168.1.70/24 to your computer's Ethernet port 3. Connect Ethernet to one of the 1GE LAN ports 4. Open browser and visit http://192.168.1.1 5. Upload openwrt-mediatek-filogic-asus_zenwifi-bt8-factory.bin 6. Once OpenWrt initramfs system comes up, do sysupgrade using openwrt-mediatek-filogic-asus_zenwifi-bt8-squashfs-sysupgrade.bin Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
John Crispin
Daniel Golle
parent
6ac09b940f
commit
2cd79733cc
444
target/linux/mediatek/dts/mt7988d-asus-zenwifi-bt8.dts
Normal file
444
target/linux/mediatek/dts/mt7988d-asus-zenwifi-bt8.dts
Normal file
@ -0,0 +1,444 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7988a.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/mt65xx.h>
|
||||
#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
|
||||
|
||||
/ {
|
||||
model = "ASUS ZenWiFi BT8";
|
||||
compatible = "asus,zenwifi-bt8", "mediatek,mt7988a";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
label-mac-device = &gmac0;
|
||||
led-boot = &led_status_green;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_status_blue;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-override = "earlycon=uart8250,mmio32,0x11000000 console=ttyS0,115200n8";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x0 0x40000000 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
cpus {
|
||||
/delete-node/ cpu@3;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
|
||||
factory {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "sync";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm-leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
led_status_red: led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
pwms = <&pwm 0 10000>;
|
||||
};
|
||||
|
||||
led_status_green: led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
pwms = <&pwm 1 10000>;
|
||||
};
|
||||
|
||||
led_status_blue: led-2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
pwms = <&pwm 3 10000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
proc-supply = <&rt5190_buck3>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
proc-supply = <&rt5190_buck3>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
proc-supply = <&rt5190_buck3>;
|
||||
};
|
||||
|
||||
&cci {
|
||||
proc-supply = <&rt5190_buck3>;
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
phy-mode = "internal";
|
||||
phy-connection-type = "internal";
|
||||
phy = <&int_2p5g_phy>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_a>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
openwrt,netdev-name = "wan";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&int_2p5g_phy {
|
||||
pinctrl-names = "i2p5gbe-led";
|
||||
pinctrl-0 = <&i2p5gbe_led0_pins>;
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
phy-mode = "2500base-x";
|
||||
phy = <&phy5>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
openwrt,netdev-name = "lan3";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gsw_phy0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
|
||||
rt5190a_64: rt5190a@64 {
|
||||
compatible = "richtek,rt5190a";
|
||||
reg = <0x64>;
|
||||
/*interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;*/
|
||||
vin2-supply = <&rt5190_buck1>;
|
||||
vin3-supply = <&rt5190_buck1>;
|
||||
vin4-supply = <&rt5190_buck1>;
|
||||
|
||||
regulators {
|
||||
rt5190_buck1: buck1 {
|
||||
regulator-name = "rt5190a-buck1";
|
||||
regulator-min-microvolt = <5090000>;
|
||||
regulator-max-microvolt = <5090000>;
|
||||
regulator-allowed-modes =
|
||||
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck2 {
|
||||
regulator-name = "vcore";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
rt5190_buck3: buck3 {
|
||||
regulator-name = "vproc";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck4 {
|
||||
regulator-name = "rt5190a-buck4";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-allowed-modes =
|
||||
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo {
|
||||
regulator-name = "rt5190a-ldo";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
phy5: ethernet-phy@5 {
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
reg = <5>;
|
||||
|
||||
reset-gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <200000>;
|
||||
reset-deassert-us = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie0_1_pins>;
|
||||
reset-gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
pcie@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
|
||||
mt7996@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
|
||||
band@0 {
|
||||
/* 2.4 GHz */
|
||||
reg = <0>;
|
||||
nvmem-cells = <&macaddr_factory_fffee>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
band@1 {
|
||||
/* 5 GHz */
|
||||
reg = <1>;
|
||||
nvmem-cells = <&macaddr_factory_ffff4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
band@2 {
|
||||
/* 6 GHz */
|
||||
reg = <2>;
|
||||
nvmem-cells = <&macaddr_factory_ffffa>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
button_pins: button-pins {
|
||||
pins = "GPIO_RESET", "GPIO_WPS";
|
||||
mediatek,pull-down-adv = <0>; /* bias-disable */
|
||||
};
|
||||
|
||||
pcie0_1_pins: pcie0-pins-g1 {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0";
|
||||
};
|
||||
};
|
||||
|
||||
pwm_pins: pwm-pins {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm0", "pwm1", "pwm3_0";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand: spi_nand@0 {
|
||||
compatible = "u-boot-dont-touch-spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-buswidth = <4>;
|
||||
spi-rx-buswidth = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x400000>;
|
||||
label = "Bootloader";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
reg = <0x400000 0x7c00000>;
|
||||
compatible = "linux,ubi";
|
||||
label = "UBI_DEV";
|
||||
|
||||
volumes {
|
||||
ubi_factory: ubi-volume-factory {
|
||||
volname = "Factory";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ubi_factory {
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_4: macaddr@4 {
|
||||
reg = <0x4 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_a: macaddr@a {
|
||||
reg = <0xa 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_fffee: macaddr@fffee {
|
||||
reg = <0xfffee 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_ffff4: macaddr@ffff4 {
|
||||
reg = <0xffff4 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_ffffa: macaddr@ffffa {
|
||||
reg = <0xffffa 0x6>;
|
||||
};
|
||||
|
||||
pin@101180 {
|
||||
reg = <0x101180 0x8>;
|
||||
};
|
||||
|
||||
hwid@110e00 {
|
||||
reg = <0x110e00 0x1>;
|
||||
};
|
||||
|
||||
hwrev@110e04 {
|
||||
reg = <0x110e04 0x4>;
|
||||
};
|
||||
|
||||
board@110e0c {
|
||||
reg = <0x110e0c 0x20>;
|
||||
};
|
||||
|
||||
mfgdate@110e3e {
|
||||
reg = <0x110e3e 0x8>;
|
||||
};
|
||||
|
||||
market@110f90 {
|
||||
reg = <0x110f90 0x5>;
|
||||
};
|
||||
|
||||
model@110fb0 {
|
||||
reg = <0x110fb0 0x10>;
|
||||
};
|
||||
|
||||
serial@110ff0 {
|
||||
reg = <0x110ff0 0x10>;
|
||||
};
|
||||
|
||||
eeprom-version@15480f {
|
||||
reg = <0x15480f 0x1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ssusb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -29,6 +29,7 @@ mediatek_setup_interfaces()
|
||||
ucidef_set_interfaces_lan_wan "lan0 eth1" eth2
|
||||
;;
|
||||
asus,rt-ax59u|\
|
||||
asus,zenwifi-bt8|\
|
||||
cetron,ct3003|\
|
||||
cmcc,a10-stock|\
|
||||
cmcc,a10-ubootmod|\
|
||||
|
||||
@ -116,7 +116,8 @@ platform_do_upgrade() {
|
||||
;;
|
||||
asus,rt-ax59u|\
|
||||
asus,tuf-ax4200|\
|
||||
asus,tuf-ax6000)
|
||||
asus,tuf-ax6000|\
|
||||
asus,zenwifi-bt8)
|
||||
CI_UBIPART="UBI_DEV"
|
||||
CI_KERNPART="linux"
|
||||
nand_do_upgrade "$1"
|
||||
@ -261,7 +262,8 @@ platform_pre_upgrade() {
|
||||
case "$board" in
|
||||
asus,rt-ax59u|\
|
||||
asus,tuf-ax4200|\
|
||||
asus,tuf-ax6000)
|
||||
asus,tuf-ax6000|\
|
||||
asus,zenwifi-bt8)
|
||||
asus_initial_setup
|
||||
;;
|
||||
xiaomi,mi-router-ax3000t|\
|
||||
|
||||
@ -293,6 +293,26 @@ define Device/asus_tuf-ax6000
|
||||
endef
|
||||
TARGET_DEVICES += asus_tuf-ax6000
|
||||
|
||||
define Device/asus_zenwifi-bt8
|
||||
DEVICE_VENDOR := ASUS
|
||||
DEVICE_MODEL := ZenWiFi BT8
|
||||
DEVICE_DTS := mt7988d-asus-zenwifi-bt8
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-usb3 mt7988-2p5g-phy-firmware kmod-mt7996-firmware mt7988-wo-firmware
|
||||
KERNEL := kernel-bin | gzip | \
|
||||
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
KERNEL_LOADADDR := 0x48080000
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
||||
ARTIFACTS := factory.bin
|
||||
ARTIFACT/factory.bin := append-image initramfs-kernel.bin | uImage lzma
|
||||
endif
|
||||
endef
|
||||
TARGET_DEVICES += asus_zenwifi-bt8
|
||||
|
||||
define Device/bananapi_bpi-r3
|
||||
DEVICE_VENDOR := Bananapi
|
||||
DEVICE_MODEL := BPi-R3
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user