ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity

ramips: add support for ZyXEL LTE3301-Plus

Browse Source 
The ZyXEL LTE3301-PLUS is an 4G indoor CPE with 2 external LTE antennas.

Specifications:

 - SoC: MediaTek MT7621AT
 - RAM: 256 MB
 - Flash: 128 MB MB NAND (MX30LF1G18AC)
 - WiFi: MediaTek MT7615E
 - Switch: 4 LAN ports (Gigabit)
 - LTE: Quectel EG506 connected by USB3 to SoC
 - SIM: 1 micro-SIM slot
 - USB: USB3 port
 - Buttons: Reset, WPS
 - LEDs: Multicolour power, internet, LTE, signal, Wifi, USB
 - Power: 12V, 1.5A

The device is built as an indoor ethernet to LTE bridge or router with
Wifi.

UART Serial:

57600N1
Located on populated 5 pin header J5:

 [o] GND
 [ ] key - no pin
 [o] RX
 [o] TX
 [o] 3.3V Vcc

MAC assignment:
lan:  98:0d:67:ee:85:54 (base, on the device back)
wlan: 98:0d:67:ee:85:55

Installation from web GUI:

- Log in as "admin" on http://192.168.1.1/
- Upload OpenWrt initramfs-recovery.bin image on the
  Maintenance -> Firmware page
- Wait for OpenWrt to boot and ssh to root@192.168.1.1
- format ubi device: ubiformat /dev/mtd6
- attach ubi device: ubiattach -m6
- create rootfs volume: ubimkvol /dev/ubi0 -n0 -N rootfs -s 1MiB
- rootfs_data volume: ubimkvol /dev/ubi0 -n1 -N rootfs_data -s 1MiB
- run sysupgrade with sysupgrade image

For more details about flashing see
commit 2449a63208 ("ramips: mt7621: Add support for ZyXEL NR7101").

Please note that this commit is needed:
firmware-utils: add marcant changes for ZyXEL NBG6716 and LTE3301-PLUS

Signed-off-by: André Valentin <avalentin@marcant.net>
This commit is contained in:
André Valentin 2022-06-17 21:35:03 +02:00 committed by Hauke Mehrtens
parent 0dc5821489
commit 2cc5059240
8 changed files with 254 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
package/boot/uboot-envtools/files/ramips
View File

@ -81,6 +81,9 @@ xiaomi,redmi-router-ac2100)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x4000" "0x20000"
;;
zyxel,lte3301-plus)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x80000"
;;
zyxel,nr7101)
idx="$(find_mtd_index Config)"
[ -n "$idx" ] && \

217
target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts Normal file
View File

@ -0,0 +1,217 @@
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "zyxel,lte3301-plus", "mediatek,mt7621-soc";
model = "ZyXEL LTE3301-Plus";
aliases {
label-mac-device = &gmac0;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
power_modem {
gpio-export,name = "power_modem";
gpio-export,output = <1>;
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "lte3301-plus:white:power";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
wifi {
label = "lte3301-plus:white:wifi";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
internet {
label = "lte3301-plus:white:internet";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
usb {
label = "lte3301-plus:white:usb";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
};
lte {
label = "lte3301-plus:white:lte";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
mobile_green {
label = "lte3301-plus:green:mobile";
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
};
mobile_orange {
label = "lte3301-plus:orange:mobile";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
mobile_red {
label = "lte3301-plus:red:mobile";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
};
&gpio {
status = "okay";
enable_usb_power {
gpio-hog;
line-name = "enable USB power";
gpios = <7 GPIO_ACTIVE_HIGH>;
output-high;
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x80000>; /* 64 KB */
};
partition@80000 {
label = "uboot_env";
reg = <0x80000 0x80000>; /* 64 KB */
};
factory: partition@100000 {
label = "factory";
reg = <0x100000 0x40000>;
};
partition@140000 {
label = "Kernel";
reg = <0x140000 0x1ec0000>;
};
partition@2140000 {
label = "kernel2";
reg = <0x2140000 0x1ec0000>;
};
partition@4000000 {
label = "wwan";
reg = <0x4000000 0x100000>;
};
partition@4100000 {
label = "ubi";
reg = <0x4100000 0x3ee0000>;
};
};
};
&ethernet {
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
};
&state_default {
gpio {
groups = "i2c", "rgmii2", "uart3", "jtag", "wdt";
function = "gpio";
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_fe6e>;
nvmem-cell-names = "mac-address";
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan4";
};
port@1 {
status = "okay";
label = "lan3";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan1";
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
status = "okay";
mt7615d@0,0 {
/* In reality at hangs at pcie1, this is a driver bug */
compatible = "pci14c3,7615";
reg = <0x0000 0 0 0 0>;
mediatek,firmware-eeprom = "mt7615e_eeprom.bin";
mediatek,mtd-eeprom = <&factory 0x0000>;
nvmem-cells = <&macaddr_factory_fe6e>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(1)>;
};
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
mtd-mac-address = <&factory 0xfe6e>;
macaddr_factory_fe6e: macaddr@fe6e {
reg = <0xfe6e 0x6>;
};
};

19
target/linux/ramips/image/mt7621.mk
View File

@ -2259,6 +2259,25 @@ define Device/zio_freezio
endef
TARGET_DEVICES += zio_freezio
define Device/zyxel_lte3301-plus
$(Device/dsa-migration)
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := LTE3301-PLUS
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
uboot-envtools kmod-usb-ledtrig-usbport kmod-usb-net-qmi-wwan \
kmod-usb-serial-option uqmi
KERNEL := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_lte3301-plus
define Device/zyxel_nr7101
$(Device/dsa-migration)
BLOCKSIZE := 128k

3
target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
View File

@ -168,6 +168,9 @@ zbtlink,zbt-wg1608-16m)
ucidef_set_led_netdev "lan4" "LAN4" "green:lan-4" "lan4"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
;;
zyxel,lte3301-plus)
ucidef_set_led_netdev "internet" "internet" "white:internet" "wwan0"
;;
esac
board_config_flush

3
target/linux/ramips/mt7621/base-files/etc/board.d/02_network
View File

@ -76,7 +76,8 @@ ramips_setup_interfaces()
ucidef_set_interface_lan "lan1 lan2"
;;
linksys,re6500|\
netgear,wac104)
netgear,wac104|\
zyxel,lte3301-plus)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
;;
mikrotik,routerboard-750gr3)

4
target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches
View File

@ -22,6 +22,10 @@ ubnt,edgerouter-x-sfp)
ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "403"
ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "404"
;;
zyxel,lte3301-plus)
ucidef_add_gpio_switch "usb_power" "Power USB Port" "usb_power" "1"
ucidef_add_gpio_switch "lte_power" "Power LTE modem" "lte_power" "1"
;;
zyxel,nr7101)
ucidef_add_gpio_switch "lte_reset" "Reset LTE/5G modem" "483"
;;

5
target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
View File

@ -20,6 +20,11 @@ boot() {
samknows,whitebox-v8)
fw_setenv bootcount 0
;;
zyxel,lte3301-plus)
[ $(printf %d $(fw_printenv -n DebugFlag)) -gt 0 ] || fw_setenv DebugFlag 1
[ $(printf %d $(fw_printenv -n Image1Stable)) -gt 0 ] || fw_setenv Image1Stable 1
[ $(printf %d $(fw_printenv -n Image1Try)) -gt 0 ] && fw_setenv Image1Try 0
;;
zyxel,nr7101)
[ $(printf %d $(fw_printenv -n DebugFlag)) -gt 0 ] || fw_setenv DebugFlag 0x1
[ $(printf %d $(fw_printenv -n Image1Stable)) -gt 0 ] || fw_setenv Image1Stable 1

1
target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
View File

@ -119,6 +119,7 @@ platform_do_upgrade() {
ubnt,edgerouter-x-sfp)
platform_upgrade_ubnt_erx "$1"
;;
zyxel,lte3301-plus|\
zyxel,nr7101)
fw_setenv CheckBypass 0
fw_setenv Image1Stable 0