ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 23:42:43 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

ramips: add support for the Senao/EnGenius ESR-9753 board

Browse Source 
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
This commit is contained in:
Gabor Juhos 2011-12-23 14:27:10 +00:00
parent 03bce34384
commit 2cb946f5b4
14 changed files with 190 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ramips/base-files/etc/diag.sh
View File

@ -33,6 +33,9 @@ get_status_led() {
dir-300-b1 | dir-600-b1 | dir-600-b2)
status_led="d-link:green:status"
;;
esr-9753)
status_led="esr-9753:orange:power"
;;
fonera20n)
status_led="fonera20n:green:power"
;;

1
target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
View File

@ -47,6 +47,7 @@ case "$FIRMWARE" in
argus-atp52b | \
bc2 | \
esr-9753 | \
fonera20n | \
hw550-3g | \
mofi3500-3gn | \

17
target/linux/ramips/base-files/etc/uci-defaults/leds
View File

@ -16,12 +16,29 @@ commit system
EOF
}
set_wifi_led() {
local sysfs="$1"
uci batch <<EOF
set system.wifi_led=led
set system.wifi_led.name='wifi'
set system.wifi_led.sysfs='$sysfs'
set system.wifi_led.trigger='netdev'
set system.wifi_led.dev='wlan0'
set system.wifi_led.mode='link rx tx'
commit system
EOF
}
board=$(ramips_board_name)
case $board in
bc2)
set_usb_led "bc2:blue:usb"
;;
esr-9753)
set_wifi_led "rt2800pci-phy0::radio"
;;
fonera20n)
set_usb_led "fonera20n:amber:usb"
;;

1
target/linux/ramips/base-files/etc/uci-defaults/network
View File

@ -68,6 +68,7 @@ ramips_setup_macs()
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
esr-9753 | \
nbg-419n)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(ramips_get_mac_binary factory 40)

2
target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
View File

@ -8,7 +8,7 @@ preinit_set_mac_address() {
. /lib/ramips.sh
case $(ramips_board_name) in
bc2 | nw718)
bc2 | nw718 | esr-9753)
mac=$(ramips_get_mac_binary factory 4)
mac=$(maccalc or "$mac" "02:00:00:00:00:00")
ifconfig eth0 hw ether $mac 2>/dev/null

3
target/linux/ramips/base-files/lib/ramips.sh
View File

@ -62,6 +62,9 @@ ramips_board_name() {
*"DIR-600 B2")
name="dir-600-b2"
;;
*"ESR-9753")
name="esr-9753"
;;
*"F5D8235 v2")
name="f5d8235-v2"
;;

1
target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
View File

@ -27,6 +27,7 @@ enum ramips_mach_type {
/* RT3052 based machines */
RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */
RAMIPS_MACH_BC2, /* NexAira BC2 */
RAMIPS_MACH_ESR_9753, /* Senao / EnGenius ESR-9753*/
RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */
RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */
RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */

5
target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
View File

@ -31,6 +31,11 @@ config RT305X_MACH_DIR_300_REVB
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_ESR_9753
bool "EnGenius ESR-9753 support"
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_FONERA20N
bool "La Fonera20N board support"
select RALINK_DEV_GPIO_BUTTONS

1
target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
View File

@ -14,6 +14,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o
obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o
obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o
obj-$(CONFIG_RT305X_MACH_ESR_9753) += mach-esr-9753.o
obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o
obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o
obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o

123
target/linux/ramips/files/arch/mips/ralink/rt305x/mach-esr-9753.c Normal file
View File

@ -0,0 +1,123 @@
/*
* Senao / EnGenius ESR-9753 board support
*
* Copyright (C) 2011 Artur Wronowski <arteqw@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
#define ESR_9753_GPIO_LED_POWER 8
#define ESR_9753_GPIO_LED_WPS 14
#define ESR_9753_GPIO_BUTTON_WPS 0 /* active low */
#define ESR_9753_GPIO_BUTTON_RESET 10 /* active low */
#define ESR_9753_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition esr_9753_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x030000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "u-boot-env",
.offset = 0x030000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "factory",
.offset = 0x040000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x050000,
.size = 0x0a0000,
}, {
.name = "rootfs",
.offset = 0x150000,
.size = 0x2b0000,
}, {
.name = "firmware",
.offset = 0x050000,
.size = 0x3b0000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct physmap_flash_data esr_9753_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.nr_parts = ARRAY_SIZE(esr_9753_partitions),
.parts = esr_9753_partitions,
#endif
};
static struct gpio_led esr_9753_leds_gpio[] __initdata = {
{
.name = "esr-9753:orange:power",
.gpio = ESR_9753_GPIO_LED_POWER,
.active_low = 1,
}, {
.name = "esr-9753:orange:wps",
.gpio = ESR_9753_GPIO_LED_WPS,
.active_low = 1,
}
};
static struct gpio_button esr_9753_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.threshold = 3,
.gpio = ESR_9753_GPIO_BUTTON_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.threshold = 3,
.gpio = ESR_9753_GPIO_BUTTON_WPS,
.active_low = 1,
}
};
static void __init esr_9753_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_flash(0, &esr_9753_flash_data);
ramips_register_gpio_leds(-1, ARRAY_SIZE(esr_9753_leds_gpio),
esr_9753_leds_gpio);
ramips_register_gpio_buttons(-1, ESR_9753_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(esr_9753_gpio_buttons),
esr_9753_gpio_buttons);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
rt305x_register_ethernet();
rt305x_register_wifi();
rt305x_register_wdt();
}
MIPS_MACHINE(RAMIPS_MACH_ESR_9753, "ESR-9753", "Senao / EnGenius ESR-9753",
esr_9753_init);

12
target/linux/ramips/files/drivers/net/ramips_esw.c
View File

@ -19,6 +19,11 @@
#define RT305X_ESW_REG_FPA2 0xc8
#define RT305X_ESW_REG_FCT2 0xcc
#define RT305X_ESW_REG_SGC2 0xe4
#define RT305X_ESW_REG_P0LED 0xa4
#define RT305X_ESW_REG_P1LED 0xa8
#define RT305X_ESW_REG_P2LED 0xac
#define RT305X_ESW_REG_P3LED 0xb0
#define RT305X_ESW_REG_P4LED 0xb4
#define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16
#define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13)
@ -227,6 +232,13 @@ rt305x_esw_hw_init(struct rt305x_esw *esw)
rt305x_esw_wr(esw, 0x3f502b28, RT305X_ESW_REG_FPA2);
rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_FPA);
/* Force Link/Activity on ports */
rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P0LED);
rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P1LED);
rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P2LED);
rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P3LED);
rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P4LED);
rt305x_mii_write(esw, 0, 31, 0x8000);
for (i = 0; i < 5; i++) {
/* TX10 waveform coefficient */

5
target/linux/ramips/image/Makefile
View File

@ -162,6 +162,10 @@ define Image/Build/Profile/RTG32B1
$(call Image/Build/Template/RTG32B1,$(1),rt-g32-b1,RT-G32-B1)
endef
define Image/Build/Profile/ESR9753
$(call Image/Build/Template/GENERIC_4M,$(1),esr-9753,ESR-9753)
endef
define Image/Build/Profile/FONERA20N
$(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
$(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000)
@ -253,6 +257,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
$(call Image/Build/Profile/BC2,$(1))
$(call Image/Build/Profile/DIR300B1,$(1))
$(call Image/Build/Profile/ESR9753,$(1))
$(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/V22RW2X2,$(1))

1
target/linux/ramips/rt305x/config-2.6.39
View File

@ -94,6 +94,7 @@ CONFIG_RAMIPS_WDT=y
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
CONFIG_RT305X_MACH_BC2=y
CONFIG_RT305X_MACH_DIR_300_REVB=y
CONFIG_RT305X_MACH_ESR_9753=y
CONFIG_RT305X_MACH_F5D8235_V2=y
CONFIG_RT305X_MACH_FONERA20N=y
CONFIG_RT305X_MACH_HW550_3G=y

16
target/linux/ramips/rt305x/profiles/engenius.mk Normal file
View File

@ -0,0 +1,16 @@
#
# Copyright (C) 2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/ESR9753
NAME:=EnGenius Profile
PACKAGES:=
endef
define Profile/ESR9753/Description
EnGenius profile.
endef
$(eval $(call Profile,ESR9753))