diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index a675acc8db5..50b460e4410 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -106,6 +106,14 @@ ipq40xx_setup_interfaces() "0u@eth0" "3:lan:2" "4:lan:1" ucidef_set_interface_wan "eth1" ;; + netgear,rbr50|\ + netgear,rbs50|\ + netgear,srr60|\ + netgear,srs60) + ucidef_add_switch "switch0" \ + "0u@eth0" "2:lan" "3:lan" "4:lan" + ucidef_set_interface_wan "eth1" + ;; qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) ucidef_set_interfaces_lan_wan "eth0" "eth1" diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 87876ad844a..505182bb65d 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -46,6 +46,13 @@ case "$FIRMWARE" in # OEM assigns 4 sequential MACs ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4)) ;; + netgear,rbr50|\ + netgear,rbs50|\ + netgear,srr60|\ + netgear,srs60) + caldata_extract_mmc "0:ART" 0x9000 0x2f20 + ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12) + ;; esac ;; "ath10k/pre-cal-ahb-a000000.wifi.bin") @@ -150,6 +157,13 @@ case "$FIRMWARE" in caldata_extract "ART" 0x1000 0x2f20 ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0) ;; + netgear,rbr50|\ + netgear,rbs50|\ + netgear,srr60|\ + netgear,srs60) + caldata_extract_mmc "0:ART" 0x1000 0x2f20 + ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0) + ;; netgear,wac510) caldata_extract "0:ART" 0x1000 0x2f20 ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6) @@ -264,6 +278,13 @@ case "$FIRMWARE" in caldata_extract "ART" 0x5000 0x2f20 ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc) ;; + netgear,rbr50|\ + netgear,rbs50|\ + netgear,srr60|\ + netgear,srs60) + caldata_extract_mmc "0:ART" 0x5000 0x2f20 + ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc) + ;; netgear,wac510) caldata_extract "0:ART" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16) diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/netgear.sh b/target/linux/ipq40xx/base-files/lib/upgrade/netgear.sh new file mode 100644 index 00000000000..f3fb626d1fb --- /dev/null +++ b/target/linux/ipq40xx/base-files/lib/upgrade/netgear.sh @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0-only +. /lib/functions.sh + +platform_do_upgrade_netgear_orbi_upgrade() { + command -v losetup >/dev/null || { + logger -s "Upgrade failed: 'losetup' not installed." + return 1 + } + + local tar_file=$1 + local kernel=$2 + local rootfs=$3 + + [ -z "$kernel" ] && kernel=$(find_mmc_part "kernel") + [ -z "$rootfs" ] && rootfs=$(find_mmc_part "rootfs") + + [ -z "$kernel" ] && echo "Upgrade failed: kernel partition not found! Rebooting..." && reboot -f + [ -z "$rootfs" ] && echo "Upgrade failed: rootfs partition not found! Rebooting..." && reboot -f + + netgear_orbi_do_flash $tar_file $kernel $rootfs + + echo "sysupgrade successful" + umount -a + reboot -f +} + +netgear_orbi_do_flash() { + local tar_file=$1 + local kernel=$2 + local rootfs=$3 + + # keep sure its unbound + losetup --detach-all || { + echo "Failed to detach all loop devices. Skip this try." + reboot -f + } + + # use the first found directory in the tar archive + local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$') + board_dir=${board_dir%/} + + echo "flashing kernel to $kernel" + tar xf $tar_file ${board_dir}/kernel -O >$kernel + + echo "flashing rootfs to ${rootfs}" + tar xf $tar_file ${board_dir}/root -O >"${rootfs}" + + # a padded rootfs is needed for overlay fs creation + local offset=$(tar xf $tar_file ${board_dir}/root -O | wc -c) + [ $offset -lt 65536 ] && { + echo "Wrong size for rootfs: $offset" + sleep 10 + reboot -f + } + + # Mount loop for rootfs_data + local loopdev="$(losetup -f)" + losetup -o $offset $loopdev $rootfs || { + echo "Failed to mount looped rootfs_data." + sleep 10 + reboot -f + } + + echo "Format new rootfs_data at position ${offset}." + mkfs.ext4 -F -L rootfs_data $loopdev + mkdir /tmp/new_root + mount -t ext4 $loopdev /tmp/new_root && { + echo "Saving config to rootfs_data at position ${offset}." + cp -v "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE" + umount /tmp/new_root + } + + # Cleanup + losetup -d $loopdev >/dev/null 2>&1 + sync +} diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh index 68027be6666..e3919766060 100644 --- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh @@ -117,6 +117,12 @@ platform_do_upgrade() { [ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware default_do_upgrade "$1" ;; + netgear,rbr50 |\ + netgear,rbs50 |\ + netgear,srr60 |\ + netgear,srs60) + platform_do_upgrade_netgear_orbi_upgrade "$1" + ;; openmesh,a42 |\ openmesh,a62 |\ plasmacloud,pa1200 |\ diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi new file mode 100644 index 00000000000..bdbee7f8370 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + aliases { + led-boot = &led_status_white; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_blue; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + status = "okay"; + + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + + switch_lan_bmp = <0x1c>; + switch_wan_bmp = <0x02>; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "green:power"; + gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led-1 { + label = "red:power"; + gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + + led_status_green: led-2 { + label = "green:status"; + gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>; + }; + + led_status_red: led-3 { + label = "red:status"; + gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + }; + + led_status_blue: led-4 { + label = "blue:status"; + gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>; + }; + + led_status_white: led-5 { + label = "white:status"; + gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&vqmmc { + status = "okay"; +}; + +&sdhci { + status = "okay"; + + pinctrl-0 = <&sd_pins>; + pinctrl-names = "default"; + cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&vqmmc>; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + pinmux { + function = "blsp_i2c0"; + pins = "gpio58", "gpio59"; + bias-disable; + }; + }; + + sd_pins: sd_pins { + pinmux { + function = "sdio"; + pins = "gpio23", "gpio24", "gpio25", "gpio26", + "gpio28", "gpio29", "gpio30", "gpio31"; + drive-strength = <10>; + }; + + pinmux_sd_clk { + function = "sdio"; + pins = "gpio27"; + drive-strength = <16>; + }; + + pinmux_sd7 { + function = "sdio"; + pins = "gpio32"; + drive-strength = <10>; + bias-disable; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_i2c3 { + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + led-controller@27 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,tlc59108"; /* really is tlc59208f */ + reg = <0x27>; + + led0@0 { + label = "rgb:led0"; + reg = <0x0>; + linux,default-trigger = "default-on"; + }; + + led1@1 { + label = "rgb:led1"; + reg = <0x1>; + linux,default-trigger = "default-on"; + }; + + led2@2 { + label = "rgb:led2"; + reg = <0x2>; + linux,default-trigger = "default-on"; + }; + + led3@3 { + label = "rgb:led3"; + reg = <0x3>; + linux,default-trigger = "default-on"; + }; + + led4@4 { + label = "rgb:led4"; + reg = <0x4>; + linux,default-trigger = "default-on"; + }; + + led5@5 { + label = "rgb:led5"; + reg = <0x5>; + linux,default-trigger = "default-on"; + }; + + led6@6 { + label = "rgb:led6"; + reg = <0x6>; + linux,default-trigger = "default-on"; + }; + + led7@7 { + label = "rgb:led7"; + reg = <0x7>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + vlan_tag = <1 0x1c>; +}; + +&gmac1 { + qcom,phy_mdio_addr = <0>; + vlan_tag = <2 0x02>; +}; + +&pcie0 { + status = "okay"; + + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + compatible = "qcom,ath10k"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + ieee80211-freq-limit = <5470000 5875000>; + qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60"; + }; + }; +}; + +&wifi0 { + status = "okay"; + + qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60"; +}; + +&wifi1 { + status = "okay"; + + qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts new file mode 100644 index 00000000000..a803999804a --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019-orbi.dtsi" + +/ { + model = "NETGEAR RBR50"; + compatible = "netgear,rbr50"; + + chosen { + bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_ALT)ro,256K(0:CDT)ro,256K(0:CDT_ALT)ro,256K(0:DDRPARAMS)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_ALT)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,1457651200(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait"; + }; + + soc { + usb2@60f8800 { + status = "okay"; + }; + + usb3@8af8800 { + status = "okay"; + }; + }; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts new file mode 100644 index 00000000000..4d0a9132c6a --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019-orbi.dtsi" + +/ { + model = "NETGEAR RBS50"; + compatible = "netgear,rbs50"; + + chosen { + bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_ALT)ro,256K(0:CDT)ro,256K(0:CDT_ALT)ro,256K(0:DDRPARAMS)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_ALT)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,1457651200(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait"; + }; + + soc { + usb2@60f8800 { + status = "okay"; + }; + + usb3@8af8800 { + status = "okay"; + }; + }; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srr60.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srr60.dts new file mode 100644 index 00000000000..80bcb2e204b --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srr60.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019-orbi.dtsi" + +/ { + model = "NETGEAR SRR60"; + compatible = "netgear,srr60"; + + chosen { + bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_1)ro,256K(0:CDT)ro,256K(0:CDT_1)ro,512K(0:BOOTCONFIG1)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_1)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,64K(cert)ro,3840K(kernel-2)ro,31488K(rootfs-2)ro,35328K@44881K(firmware-2)ro,5M(device_table)ro,17M(cp_file)ro,102737K(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait"; + }; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srs60.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srs60.dts new file mode 100644 index 00000000000..65bb7ac3977 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srs60.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019-orbi.dtsi" + +/ { + model = "NETGEAR SRS60"; + compatible = "netgear,srs60"; + + chosen { + bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_1)ro,256K(0:CDT)ro,256K(0:CDT_1)ro,512K(0:BOOTCONFIG1)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_1)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,64K(cert)ro,3840K(kernel-2)ro,31488K(rootfs-2)ro,35328K@44881K(firmware-2)ro,5M(device_table)ro,17M(cp_file)ro,102737K(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait"; + }; +}; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index e0cfa075415..dcfe3e027c1 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -646,6 +646,64 @@ define Device/netgear_ex6150v2 endef TARGET_DEVICES += netgear_ex6150v2 +define Device/netgear_orbi + $(call Device/DniImage) + SOC := qcom-ipq4019 + DEVICE_VENDOR := NETGEAR + IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \ + append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \ + append-rootfs | pad-rootfs | netgear-dni + IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \ + sysupgrade-tar rootfs=$$$$@ | append-metadata + DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup +endef + +define Device/netgear_rbx50 + $(call Device/netgear_orbi) + NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4 + KERNEL_SIZE := 3932160 + ROOTFS_SIZE := 32243712 + IMAGE_SIZE := 36175872 +endef + +define Device/netgear_rbr50 + $(call Device/netgear_rbx50) + DEVICE_MODEL := RBR50 + DEVICE_VARIANT := v1 + NETGEAR_BOARD_ID := RBR50 +endef +TARGET_DEVICES += netgear_rbr50 + +define Device/netgear_rbs50 + $(call Device/netgear_rbx50) + DEVICE_MODEL := RBS50 + DEVICE_VARIANT := v1 + NETGEAR_BOARD_ID := RBS50 +endef +TARGET_DEVICES += netgear_rbs50 + +define Device/netgear_srx60 + $(call Device/netgear_orbi) + NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4 + KERNEL_SIZE := 3932160 + ROOTFS_SIZE := 32243712 + IMAGE_SIZE := 36175872 +endef + +define Device/netgear_srr60 + $(call Device/netgear_srx60) + DEVICE_MODEL := SRR60 + NETGEAR_BOARD_ID := SRR60 +endef +TARGET_DEVICES += netgear_srr60 + +define Device/netgear_srs60 + $(call Device/netgear_srx60) + DEVICE_MODEL := SRS60 + NETGEAR_BOARD_ID := SRS60 +endef +TARGET_DEVICES += netgear_srs60 + define Device/netgear_wac510 $(call Device/FitImage) $(call Device/UbiFit) diff --git a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch index aef58ee50e9..471fcd64986 100644 --- a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -902,11 +902,61 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -902,11 +902,65 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -47,18 +47,22 @@ Signed-off-by: John Crispin qcom-ipq4019-ap.dk07.1-c2.dtb \ + qcom-ipq4019-a62.dtb \ + qcom-ipq4019-cm520-79f.dtb \ ++ qcom-ipq4019-e2600ac-c1.dtb \ ++ qcom-ipq4019-e2600ac-c2.dtb \ + qcom-ipq4019-ea8300.dtb \ + qcom-ipq4019-eap2200.dtb \ + qcom-ipq4019-fritzbox-7530.dtb \ + qcom-ipq4019-fritzrepeater-1200.dtb \ + qcom-ipq4019-fritzrepeater-3000.dtb \ ++ qcom-ipq4019-habanero-dvk.dtb \ + qcom-ipq4019-map-ac2200.dtb \ + qcom-ipq4019-mr8300.dtb \ -+ qcom-ipq4019-e2600ac-c1.dtb \ -+ qcom-ipq4019-e2600ac-c2.dtb \ -+ qcom-ipq4019-habanero-dvk.dtb \ + qcom-ipq4019-pa2200.dtb \ ++ qcom-ipq4019-rbr50.dtb \ ++ qcom-ipq4019-rbs50.dtb \ + qcom-ipq4019-rtl30vw.dtb \ ++ qcom-ipq4019-srr60.dtb \ ++ qcom-ipq4019-srs60.dtb \ + qcom-ipq4019-u4019-32m.dtb \ + qcom-ipq4019-wpj419.dtb \ + qcom-ipq4019-wtr-m2133hp.dtb \ diff --git a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch index 0447fb60120..bb63c1c4fb4 100644 --- a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -837,11 +837,61 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -837,11 +837,65 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -58,7 +58,11 @@ Signed-off-by: John Crispin + qcom-ipq4019-e2600ac-c2.dtb \ + qcom-ipq4019-habanero-dvk.dtb \ + qcom-ipq4019-pa2200.dtb \ ++ qcom-ipq4019-rbr50.dtb \ ++ qcom-ipq4019-rbs50.dtb \ + qcom-ipq4019-rtl30vw.dtb \ ++ qcom-ipq4019-srr60.dtb \ ++ qcom-ipq4019-srs60.dtb \ + qcom-ipq4019-u4019-32m.dtb \ + qcom-ipq4019-wpj419.dtb \ + qcom-ipq4019-wtr-m2133hp.dtb \