mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
ramips: add support for Netgear EAX12 series
Netgear EAX12, EAX11v2, EAX15v2 are wall-plug 802.11ax (Wi-Fi 6)
extenders that share the SoC, WiFi chip, and image format with the
WAX202.
Specifications:
* MT7621, 256 MiB RAM, 128 MiB NAND
* MT7915: 2.4/5 GHz 2x2 802.11ax (DBDC)
* Ethernet: 1 port 10/100/1000
* UART: 115200 baud (labeled on board)
All LEDs and buttons appear to work without state_default.
Installation:
* Flash the factory image through the stock web interface, or TFTP to
the bootloader. NMRP can be used to TFTP without opening the case.
Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.
References in GPL source:
https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz
* target/linux/ramips/dts/mt7621-rfb-ax-nand.dts
DTS file for this device.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
(cherry picked from commit 32ea8a9a7e)
This commit is contained in:
Wenli Looi
Rafał Miłecki
parent
b20da12eca
commit
29280638e8
@ -75,6 +75,7 @@ h3c,tx1801-plus|\
|
||||
h3c,tx1806|\
|
||||
jcg,q20|\
|
||||
linksys,e7350|\
|
||||
netgear,eax12|\
|
||||
netgear,wax202|\
|
||||
zyxel,wsm20)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
|
||||
|
||||
189
target/linux/ramips/dts/mt7621_netgear_eax12.dts
Normal file
189
target/linux/ramips/dts/mt7621_netgear_eax12.dts
Normal file
@ -0,0 +1,189 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "netgear,eax12", "mediatek,mt7621-soc";
|
||||
model = "Netgear EAX12";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_red;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: power_red {
|
||||
label = "red:power";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
client_green {
|
||||
label = "green:client";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
client_red {
|
||||
label = "red:client";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_green {
|
||||
label = "green:router";
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
router_red {
|
||||
label = "red:router";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps_green {
|
||||
label = "green:wps";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
eth_green {
|
||||
label = "green:eth";
|
||||
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
eth_yellow {
|
||||
label = "yellow:eth";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Bootloader";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "Config";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@100000 {
|
||||
label = "Factory";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "firmware";
|
||||
reg = <0x180000 0x3800000>;
|
||||
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "kernel";
|
||||
reg = <0x0 0x400000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "ubi";
|
||||
reg = <0x400000 0x3400000>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@2780000 {
|
||||
label = "firmware_backup";
|
||||
reg = <0x3980000 0x3800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@4d80000 {
|
||||
label = "CFG";
|
||||
reg = <0x7180000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5580000 {
|
||||
label = "RAE";
|
||||
reg = <0x7380000 0x600000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5980000 {
|
||||
label = "POT";
|
||||
reg = <0x7980000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6780000 {
|
||||
label = "LOG";
|
||||
reg = <0x79A0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "lan";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
@ -1712,6 +1712,32 @@ define Device/mts_wg430223
|
||||
endef
|
||||
TARGET_DEVICES += mts_wg430223
|
||||
|
||||
define Device/netgear_eax12
|
||||
$(Device/nand)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := EAX12
|
||||
DEVICE_ALT0_VENDOR := NETGEAR
|
||||
DEVICE_ALT0_MODEL := EAX11
|
||||
DEVICE_ALT0_VARIANT := v2
|
||||
DEVICE_ALT1_VENDOR := NETGEAR
|
||||
DEVICE_ALT1_MODEL := EAX15
|
||||
DEVICE_ALT1_VARIANT := v2
|
||||
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
|
||||
NETGEAR_ENC_MODEL := EAX12
|
||||
NETGEAR_ENC_REGION := US
|
||||
NETGEAR_ENC_HW_ID_LIST := 1010000004540000_NETGEAR
|
||||
NETGEAR_ENC_MODEL_LIST := EAX12;EAX11v2;EAX15v2
|
||||
IMAGE_SIZE := 57344k
|
||||
KERNEL_LOADADDR := 0x82000000
|
||||
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
|
||||
append-squashfs4-fakeroot
|
||||
IMAGES += factory.img
|
||||
IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
|
||||
append-ubi | check-size | netgear-encrypted-factory
|
||||
endef
|
||||
TARGET_DEVICES += netgear_eax12
|
||||
|
||||
define Device/netgear_ex6150
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
|
||||
@ -157,6 +157,10 @@ mikrotik,routerboard-m11g)
|
||||
mtc,wr1201)
|
||||
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "br-lan"
|
||||
;;
|
||||
netgear,eax12)
|
||||
ucidef_set_led_netdev "eth_act" "LAN act" "yellow:eth" "lan" "tx rx"
|
||||
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth" "lan" "link"
|
||||
;;
|
||||
netgear,r6220|\
|
||||
netgear,r6260|\
|
||||
netgear,r6350|\
|
||||
|
||||
@ -42,6 +42,7 @@ ramips_setup_interfaces()
|
||||
linksys,re7000|\
|
||||
mikrotik,ltap-2hnd|\
|
||||
mikrotik,routerboard-m11g|\
|
||||
netgear,eax12|\
|
||||
netgear,ex6150|\
|
||||
sercomm,na502|\
|
||||
sercomm,na502s|\
|
||||
@ -301,6 +302,10 @@ ramips_setup_macs()
|
||||
label_mac=$wan_mac
|
||||
lan_mac=$(macaddr_add "$wan_mac" 2)
|
||||
;;
|
||||
netgear,eax12)
|
||||
lan_mac=$(mtd_get_mac_ascii Config mac)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
netgear,wax202)
|
||||
lan_mac=$(mtd_get_mac_ascii Config mac)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
|
||||
@ -130,6 +130,11 @@ case "$board" in
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
netgear,eax12)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii Config mac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
netgear,wax202)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii Config mac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
|
||||
@ -89,6 +89,7 @@ platform_do_upgrade() {
|
||||
linksys,ea8100-v1|\
|
||||
linksys,ea8100-v2|\
|
||||
mts,wg430223|\
|
||||
netgear,eax12|\
|
||||
netgear,r6220|\
|
||||
netgear,r6260|\
|
||||
netgear,r6350|\
|
||||
|
||||
Loading…
Reference in New Issue
Block a user