mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
ramips: add support for Belkin RT1800
Belkin RT1800 is an 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A. Specifications: - SoC: MT7621 (880MHz, 2 Cores) - RAM: 256 MB - Flash: 128 MB NAND - Wi-Fi: - MT7915D: 2.4/5 GHz (DBDC) - Ethernet: 5x 1GiE MT7530 - USB: 1x USB 3.0 - UART: J4 (57600 baud) - Pinout: [3V3] (TXD) (RXD) (blank) (GND) Notes: * This device has a dual-boot partition scheme, but this firmware works only on boot partition 1. Installation: Upload the generated factory.bin image via the stock web firmware updater. Signed-off-by: Rosen Penev <rosenp@gmail.com>
This commit is contained in:
Rosen Penev
Hauke Mehrtens
parent
fe609889e2
commit
26a6a6a60b
@ -47,6 +47,7 @@ zbtlink,zbt-wg2626|\
|
||||
zte,mf283plus)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
|
||||
;;
|
||||
belkin,rt1800|\
|
||||
h3c,tx1800-plus|\
|
||||
h3c,tx1801-plus|\
|
||||
h3c,tx1806|\
|
||||
|
||||
165
target/linux/ramips/dts/mt7621_belkin_rt1800.dts
Normal file
165
target/linux/ramips/dts/mt7621_belkin_rt1800.dts
Normal file
@ -0,0 +1,165 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "belkin,rt1800", "mediatek,mt7621-soc";
|
||||
model = "Belkin RT1800";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: led-power {
|
||||
label = "white:power";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led-wan {
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Boot";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "Config";
|
||||
reg = <0x80000 0x80000>;
|
||||
};
|
||||
|
||||
factory: partition@100000 {
|
||||
label = "Factory";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "firmware";
|
||||
reg = <0x180000 0x3000000>;
|
||||
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "kernel";
|
||||
reg = <0x0 0x400000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "ubi";
|
||||
reg = <0x400000 0x2c00000>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@3180000 {
|
||||
label = "alt_firmware";
|
||||
reg = <0x3180000 0x3000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6180000 {
|
||||
label = "cbtinfo";
|
||||
reg = <0x6180000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
/* seems to be the end here. Can't read past 0x6200000 */
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-handle = <ðphy0>;
|
||||
};
|
||||
|
||||
&mdio {
|
||||
ethphy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -70,6 +70,30 @@ define Build/iodata-mstc-header
|
||||
)
|
||||
endef
|
||||
|
||||
define Build/belkin-header
|
||||
$(eval magic=$(word 1,$(1)))
|
||||
$(eval hw_ver=$(word 2,$(1)))
|
||||
$(eval fw_ver=$(word 3,$(1)))
|
||||
|
||||
( \
|
||||
type_fw_date=$$(printf "01%02x%02x%02x" \
|
||||
$$(date -d "@$(SOURCE_DATE_EPOCH)" "+%y %m %d")); \
|
||||
hw_fw_ver=$$(printf "%02x%02x%02x%02x" \
|
||||
$(hw_ver) $$(echo $(fw_ver) | cut -d. -f-3 | tr . ' ')); \
|
||||
fw_len_crc=$$(gzip -c $@ | tail -c 8 | od -An -tx8 | tr -d ' \n'); \
|
||||
fw_crc_len="$${fw_len_crc:8:8}$${fw_len_crc:0:8}"; \
|
||||
\
|
||||
printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
|
||||
printf "$$(echo $${type_fw_date}$${hw_fw_ver} | \
|
||||
sed 's/../\\x&/g')"; \
|
||||
printf "$$(echo $${fw_crc_len}$${fw_crc_len} | \
|
||||
sed 's/../\\x&/g')"; \
|
||||
printf "\x5c\x78\x00\x00"; \
|
||||
cat $@; \
|
||||
) > $@.new
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/ubnt-erx-factory-image
|
||||
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
|
||||
echo '21001:7' > $(1).compat; \
|
||||
@ -341,6 +365,27 @@ define Device/beeline_smartbox-turbo
|
||||
endef
|
||||
TARGET_DEVICES += beeline_smartbox-turbo
|
||||
|
||||
define Device/belkin_rt1800
|
||||
$(Device/dsa-migration)
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGE_SIZE := 49152k
|
||||
DEVICE_VENDOR := Belkin
|
||||
DEVICE_MODEL := RT1800
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-usb3 uboot-envtools
|
||||
UBINIZE_OPTS := -E 5
|
||||
KERNEL_LOADADDR := 0x82000000
|
||||
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
|
||||
append-squashfs4-fakeroot
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
||||
append-ubi | check-size | belkin-header RT18 1 9.9.9
|
||||
endef
|
||||
TARGET_DEVICES += belkin_rt1800
|
||||
|
||||
define Device/buffalo_wsr-1166dhp
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
|
||||
@ -28,6 +28,9 @@ beeline,smartbox-giga|\
|
||||
beeline,smartbox-turbo)
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
|
||||
;;
|
||||
belkin,rt1800)
|
||||
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
|
||||
;;
|
||||
cudy,wr2100)
|
||||
ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
|
||||
ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
|
||||
|
||||
@ -205,6 +205,11 @@ ramips_setup_macs()
|
||||
wan_mac=$lan_mac
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
belkin,rt1800)
|
||||
lan_mac=$(mtd_get_mac_ascii Config lan_hwaddr)
|
||||
wan_mac=$(mtd_get_mac_ascii Config wan_hwaddr)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
mikrotik,routerboard-750gr3|\
|
||||
mikrotik,routerboard-760igs|\
|
||||
mikrotik,routerboard-m11g|\
|
||||
|
||||
@ -84,6 +84,11 @@ case "$board" in
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
belkin,rt1800)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii Config wan_hwaddr)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
netgear,wax202)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii Config mac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
|
||||
@ -22,6 +22,7 @@ boot() {
|
||||
linksys,ea8100-v2)
|
||||
mtd resetbc s_env || true
|
||||
;;
|
||||
belkin,rt1800|\
|
||||
samknows,whitebox-v8)
|
||||
fw_setenv bootcount 0
|
||||
;;
|
||||
|
||||
@ -57,6 +57,7 @@ platform_do_upgrade() {
|
||||
beeline,smartbox-flash|\
|
||||
beeline,smartbox-giga|\
|
||||
beeline,smartbox-turbo|\
|
||||
belkin,rt1800|\
|
||||
dlink,dir-1960-a1|\
|
||||
dlink,dir-2640-a1|\
|
||||
dlink,dir-2660-a1|\
|
||||
|
||||
Loading…
Reference in New Issue
Block a user