ramips: add support for Linksys E5600

This submission relied heavily on the work of Linksys EA7300 v1/ v2.

Specifications:

* SoC: MediaTek MT7621A (880 MHz 2c/4t)
* RAM: 128M DDR3-1600
* Flash: 128M NAND
* Eth: MediaTek MT7621A (10/100/1000 Mbps x5)
* Radio: MT7603E/MT7613BE (2.4 GHz & 5 GHz)
* Antennae: 2 internal fixed in the casing and 2 on the PCB
* LEDs: Blue (x4 Ethernet)
  Blue+Orange (x2 Power + WPS and Internet)
* Buttons: Reset (x1)
  WPS (x1)

Installation:

Flash factory image through GUI.

This device has 2 partitions for the firmware called firmware and
alt_firmware. To successfully flash and boot the device, the device
should have been running from alt_firmware partition. To get the device
booted through alt_firmware partition, download the OEM firmware from
Linksys website and upgrade the firmware from web GUI. Once this is done,
flash the OpenWrt Factory firmware from web GUI.

Reverting to factory firmware:

1. Boot to 'alt_firmware'(where stock firmware resides) by doing one of
   the following:
   Press the "wps" button as soon as power LED turns on when booting.
   (OR) Hard-reset the router consecutively three times to force it to
   boot from 'alt_firmware'.
2. To remove any traces of OpenWRT from your router simply flash the OEM
   image at this point.

Signed-off-by: Aashish Kulkarni <aashishkul@gmail.com>

[fix hanging indents and wrap to 74 characters per line,
 add kmod-mt7663-firmware-sta package for 5GHz STA mode to work,
 remove sysupgrade.bin and concatenate IMAGES instead in mt7621.mk,
 set default-state "on" for power LED]
Signed-off-by: Sannihith Kinnera <digislayer@protonmail.com>

[move check-size before append-metadata, remove trailing whitespace]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Aashish Kulkarni 2021-03-02 10:40:14 +05:30 committed by Adrian Schmutzler
parent b126d9c3a3
commit 251c995cbb
7 changed files with 212 additions and 0 deletions

View File

@ -0,0 +1,182 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "linksys,e5600", "mediatek,mt7621-soc";
model = "Linksys E5600";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
wps {
label = "amber:wps";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
led_power: power {
label = "blue:power";
gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
wan_amber {
label = "amber:wan";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
wan_blue {
label = "blue:wan";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "u_env";
reg = <0x80000 0x40000>;
read-only;
};
factory: partition@c0000 {
label = "factory";
reg = <0xc0000 0x40000>;
read-only;
};
partition@100000 {
label = "s_env";
reg = <0x100000 0x40000>;
};
partition@140000 {
label = "devinfo";
reg = <0x140000 0x40000>;
read-only;
};
partition@180000 {
label = "kernel";
reg = <0x180000 0x400000>;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0x1a00000>;
};
partition@1f80000 {
label = "alt_firmware";
reg = <0x1f80000 0x1e00000>;
};
partition@3d80000 {
label = "gdata";
reg = <0x3d80000 0x4200000>;
};
};
};
&state_default {
gpio {
groups = "uart2", "uart3", "jtag";
function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
&pcie1 {
mt76@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan1";
};
port@1 {
status = "okay";
label = "lan2";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan4";
};
port@4 {
status = "okay";
label = "wan";
};
};
};
&xhci {
status = "disabled";
};

View File

@ -22,6 +22,10 @@ define Build/elecom-wrc-gs-factory
mv $@.new $@ mv $@.new $@
endef endef
define Build/gemtek-trailer
printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@
endef
define Build/iodata-factory define Build/iodata-factory
$(eval fw_size=$(word 1,$(1))) $(eval fw_size=$(word 1,$(1)))
$(eval fw_type=$(word 2,$(1))) $(eval fw_type=$(word 2,$(1)))
@ -762,6 +766,25 @@ define Device/lenovo_newifi-d1
endef endef
TARGET_DEVICES += lenovo_newifi-d1 TARGET_DEVICES += lenovo_newifi-d1
define Device/linksys_e5600
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E5600
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-mt7663-firmware-sta uboot-envtools
UBINIZE_OPTS := -E 5
IMAGES += factory.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | gemtek-trailer
endef
TARGET_DEVICES += linksys_e5600
define Device/linksys_ea7xxx define Device/linksys_ea7xxx
$(Device/dsa-migration) $(Device/dsa-migration)
$(Device/uimage-lzma-loader) $(Device/uimage-lzma-loader)

View File

@ -46,6 +46,9 @@ gnubee,gb-pc2)
ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1" ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2" ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
;; ;;
linksys,e5600)
ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link"
;;
linksys,ea7300-v1|\ linksys,ea7300-v1|\
linksys,ea7300-v2|\ linksys,ea7300-v2|\
linksys,ea7500-v2) linksys,ea7500-v2)

View File

@ -127,6 +127,7 @@ ramips_setup_macs()
zbtlink,zbt-wg3526-32m) zbtlink,zbt-wg3526-32m)
label_mac=$(mtd_get_mac_binary factory 0x4) label_mac=$(mtd_get_mac_binary factory 0x4)
;; ;;
linksys,e5600|\
linksys,ea7300-v1|\ linksys,ea7300-v1|\
linksys,ea7300-v2|\ linksys,ea7300-v2|\
linksys,ea7500-v2) linksys,ea7500-v2)

View File

@ -18,6 +18,7 @@ case "$board" in
[ "$PHYNBR" = "1" ] && \ [ "$PHYNBR" = "1" ] && \
macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress
;; ;;
linksys,e5600|\
linksys,ea7300-v1|\ linksys,ea7300-v1|\
linksys,ea7300-v2|\ linksys,ea7300-v2|\
linksys,ea7500-v2) linksys,ea7500-v2)

View File

@ -8,6 +8,7 @@ boot() {
[ -n "$(fw_printenv bootcount bootchanged 2>/dev/null)" ] &&\ [ -n "$(fw_printenv bootcount bootchanged 2>/dev/null)" ] &&\
echo -e "bootcount\nbootchanged\n" | /usr/sbin/fw_setenv -s - echo -e "bootcount\nbootchanged\n" | /usr/sbin/fw_setenv -s -
;; ;;
linksys,e5600|\
linksys,ea7300-v1|\ linksys,ea7300-v1|\
linksys,ea7300-v2|\ linksys,ea7300-v2|\
linksys,ea7500-v2) linksys,ea7500-v2)

View File

@ -50,6 +50,7 @@ platform_do_upgrade() {
dlink,dir-2660-a1|\ dlink,dir-2660-a1|\
hiwifi,hc5962|\ hiwifi,hc5962|\
jcg,q20|\ jcg,q20|\
linksys,e5600|\
linksys,ea7300-v1|\ linksys,ea7300-v1|\
linksys,ea7300-v2|\ linksys,ea7300-v2|\
linksys,ea7500-v2|\ linksys,ea7500-v2|\