diff --git a/target/linux/realtek/base-files/etc/board.d/02_network b/target/linux/realtek/base-files/etc/board.d/02_network
index e856ad7479a..5073dbcc31e 100644
--- a/target/linux/realtek/base-files/etc/board.d/02_network
+++ b/target/linux/realtek/base-files/etc/board.d/02_network
@@ -82,6 +82,10 @@ d-link,dgs-1210-28mp-f)
 	ucidef_set_poe 370 "lan8 lan7 lan6 lan5 lan4 lan3 lan2 lan1 lan16 lan15 lan14 lan13 lan12 lan11 lan10 lan9 lan24 lan23
 			lan22 lan21 lan20 lan19 lan18 lan17"
 	;;
+d-link,dgs-1210-28p-f)
+	ucidef_set_poe 193 "lan8 lan7 lan6 lan5 lan4 lan3 lan2 lan1 lan16 lan15 lan14 lan13 lan12 lan11 lan10 lan9 lan24 lan23
+			lan22 lan21 lan20 lan19 lan18 lan17"
+	;;
 engenius,ews2910p)
 	ucidef_set_poe 60 "$(filter_port_list "$lan_list" "lan9 lan10")"
 	;;
diff --git a/target/linux/realtek/base-files/etc/uci-defaults/04_dlinkfan b/target/linux/realtek/base-files/etc/uci-defaults/04_dlinkfan
index 1a5fd3606f2..17cc6494388 100644
--- a/target/linux/realtek/base-files/etc/uci-defaults/04_dlinkfan
+++ b/target/linux/realtek/base-files/etc/uci-defaults/04_dlinkfan
@@ -7,7 +7,7 @@
 board=$(board_name)
 
 case "$board" in
-d-link,dgs-1210-28mp-f)
+d-link,dgs-1210-28p-f|d-link,dgs-1210-28mp-f)
 	# Enable fan control
 	FAN_CTRL='/sys/class/hwmon/hwmon0'
 	echo 1 > "$FAN_PATH/pwm1_enable"
diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28mp-f.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28mp-f.dts
index 4c20a4ae6e2..4aa6498b03e 100644
--- a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28mp-f.dts
+++ b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28mp-f.dts
@@ -5,53 +5,10 @@
 #include "rtl83xx_d-link_dgs-1210_gpio.dtsi"
 #include "rtl83xx_d-link_dgs-1210_gpio_sfp.dtsi"
 #include "rtl8382_d-link_dgs-1210-28_common.dtsi"
+#include "rtl8382_d-link_dgs-1210-28p_common.dtsi"
 
 / {
 	compatible = "d-link,dgs-1210-28mp-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc";
 	model = "D-Link DGS-1210-28MP F";
 
-	/* LM63 */
-	i2c-gpio-4 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <2>;
-		i2c-gpio,scl-open-drain; /* should be replaced by i2c-gpio,scl-has-no-pullup in kernel 6.6 */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		lm63@4c {
-			compatible = "national,lm63";
-			reg = <0x4c>;
-		};
-	};
-};
-
-&leds {
-	link_act {
-		label = "green:link_act";
-		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	};
-
-	poe {
-		label = "green:poe";
-		gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	};
-
-	poe_max {
-		label = "yellow:poe_max";
-		gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&keys {
-	mode {
-		label = "mode";
-		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-		linux,code = <BTN_0>;
-	};
-};
-
-&uart1 {
-	status = "okay";
 };
diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28p-f.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28p-f.dts
new file mode 100644
index 00000000000..6cb8db81bcf
--- /dev/null
+++ b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28p-f.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rtl838x.dtsi"
+#include "rtl83xx_d-link_dgs-1210_common.dtsi"
+#include "rtl83xx_d-link_dgs-1210_gpio.dtsi"
+#include "rtl83xx_d-link_dgs-1210_gpio_sfp.dtsi"
+#include "rtl8382_d-link_dgs-1210-28_common.dtsi"
+#include "rtl8382_d-link_dgs-1210-28p_common.dtsi"
+
+/ {
+	compatible = "d-link,dgs-1210-28p-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc";
+	model = "D-Link DGS-1210-28P F";
+};
diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28p_common.dtsi b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28p_common.dtsi
new file mode 100644
index 00000000000..8aaa637afe8
--- /dev/null
+++ b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28p_common.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/ {
+	/* LM63 */
+	i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio1 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		i2c-gpio,scl-open-drain; /* should be replaced by i2c-gpio,scl-has-no-pullup in kernel 6.6 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lm63@4c {
+			compatible = "national,lm63";
+			reg = <0x4c>;
+		};
+	};
+};
+
+&leds {
+	link_act {
+		label = "green:link_act";
+		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	};
+
+	poe {
+		label = "green:poe";
+		gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	};
+
+	poe_max {
+		label = "yellow:poe_max";
+		gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&keys {
+	mode {
+		label = "mode";
+		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+		linux,code = <BTN_0>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/target/linux/realtek/image/rtl838x.mk b/target/linux/realtek/image/rtl838x.mk
index c44e3a74f7e..c8e1c481ec9 100644
--- a/target/linux/realtek/image/rtl838x.mk
+++ b/target/linux/realtek/image/rtl838x.mk
@@ -75,6 +75,15 @@ define Device/d-link_dgs-1210-28mp-f
 endef
 TARGET_DEVICES += d-link_dgs-1210-28mp-f
 
+define Device/d-link_dgs-1210-28p-f
+  $(Device/d-link_dgs-1210)
+  SOC := rtl8382
+  DEVICE_MODEL := DGS-1210-28P
+  DEVICE_VARIANT := F
+  DEVICE_PACKAGES += realtek-poe kmod-hwmon-lm63
+endef
+TARGET_DEVICES += d-link_dgs-1210-28p-f
+
 # The "IMG-" uImage name allows flashing the iniramfs from the vendor Web UI.
 # Avoided for sysupgrade, as the vendor FW would do an incomplete flash.
 define Device/engenius_ews2910p