ath25: switch from uci-defaults to board.d

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47756

target/linux/ath25/base-files/etc/board.d/01_leds

@@ -0,0 +1,13 @@
+#!/bin/sh
+# Copyright 2012-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults-new.sh
+
+board_config_update
+
+ucidef_set_led_netdev "wlan" "wlan" "wlan" "wlan0"
+
+board_config_flush
+
+exit 0

target/linux/ath25/base-files/etc/board.d/02_network

@@ -0,0 +1,28 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults-new.sh
+
+board_config_update
+
+if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \
+     -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \
+   [ -x /sbin/swconfig ];
+then
+	ucidef_add_switch "eth0" \
+		"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+
+elif [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+       -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ];
+then
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+
+elif [ -d /sys/class/net/eth1 ]; then
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+
+else
+	ucidef_set_interface_lan "eth0"
+fi
+
+board_config_flush
+
+exit 0

target/linux/ath25/base-files/etc/uci-defaults/01_leds

@@ -1,11 +0,0 @@
-#!/bin/sh
-# Copyright 2012 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-
-ucidef_set_led_netdev "wlan" "wlan" "wlan" "wlan0"
-
-ucidef_commit_leds
-
-exit 0

target/linux/ath25/base-files/etc/uci-defaults/02_network

@@ -1,45 +0,0 @@
-#!/bin/sh
-if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \
-     -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \
-   [ -x /sbin/swconfig ];
-then
-	uci batch <<EOF
-set network.eth0=switch
-set network.eth0.name=eth0
-set network.eth0.reset=1
-set network.eth0.enable_vlan=1
-set network.eth0_1=switch_vlan
-set network.eth0_1.device=eth0
-set network.eth0_1.vlan=1
-set network.eth0_1.ports="0 1 2 3 5t"
-set network.eth0_2=switch_vlan
-set network.eth0_2.device=eth0
-set network.eth0_2.vlan=2
-set network.eth0_2.ports="4 5t"
-EOF
-	HAS_SWITCH=1
-fi
-
-if [ -n "$HAS_SWITCH" -o \
-	-e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
-	-e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
-	uci batch <<EOF
-set network.lan.ifname=eth0.1
-set network.wan=interface
-set network.wan.ifname=eth0.2
-set network.wan.proto=dhcp
-commit network
-EOF
-	HAS_SWITCH=1
-fi
-
-[ -z "$HAS_SWITCH" -a -d /sys/class/net/eth1 ] && {
-	uci batch <<EOF
-set network.wan=interface
-set network.wan.ifname=eth1
-set network.wan.proto=dhcp
-commit network
-EOF
-}
-
-uci commit network