ipq40xx: dts: remove leftover nodes after DSA conversion

Remove ess-psgmii@98000, edma@c080000 and ess-switch@c000000 nodes.
These nodes are not used after the DSA conversion, but were left over
in a few devices added recently.

ZTE MF289F is omitted on purpose, as for it, these nodes will be removed
together with DSA conversion.

Build tested only, as I only have MF286D from those devices.

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-whw01-v1.dts

@@ -31,21 +31,9 @@
 			};
 		};
 
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
 		ess_tcsr@1953000 {
 			status = "okay";
 		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
 	};
 };
 

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts

@@ -85,10 +85,6 @@
 			reset-delay-us = <2000>;
 		};
 
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
 		tcsr@1949000 {
 			compatible = "qcom,tcsr";
 			reg = <0x1949000 0x100>;

target/linux/ipq40xx/patches-5.15/900-dts-ipq4019-ap-dk01.1.patch

@@ -56,7 +56,7 @@
  		};
  
  		serial@78af000 {
-@@ -109,5 +128,41 @@
+@@ -109,5 +128,29 @@
  		wifi@a800000 {
  			status = "okay";
  		};
@@ -65,18 +65,6 @@
 +			status = "okay";
 +		};
 +
-+		ess-switch@c000000 {
-+			status = "okay";
-+		};
-+
-+		ess-psgmii@98000 {
-+			status = "okay";
-+		};
-+
-+		edma@c080000 {
-+			status = "okay";
-+		};
-+
 +		usb3_ss_phy: ssphy@9a000 {
 +			status = "okay";
 +		};