mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 05:38:00 +00:00
mediatek: filogic: add support for Cudy AP3000 Outdoor
Hardware highlights: - MediaTek MT7981 WiSoC - 256MB DDR3 RAM - 64MB SPI-NAND - MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5) - 1x LED in two colors - 2x Button - 1x 1GbE - Two detachable antenas, two internal pcb antenas - PoE powered (standalone) MAC: LAN MAC: label mac 2.4G MAC: label mac -1 5G MAC: label mac How to install: 1. Apply Cudy Intermediate OpenWrt image for AP3000 Outdoor V1 2. Install OpenWrt sysupgrade image Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16156 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Pawel Dembicki
Hauke Mehrtens
parent
3774f3272e
commit
19d770d7b9
@ -6,6 +6,7 @@ set_preinit_iface() {
|
||||
ip link set eth1 up
|
||||
ifname=eth1
|
||||
;;
|
||||
cudy,ap3000outdoor-v1|\
|
||||
cudy,re3000-v1|\
|
||||
ubnt,unifi-6-lr|\
|
||||
zyxel,nwa50ax-pro)
|
||||
|
||||
209
target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts
Normal file
209
target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts
Normal file
@ -0,0 +1,209 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "mt7981.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Cudy AP3000 Outdoor v1";
|
||||
compatible = "cudy,ap3000outdoor-v1", "mediatek,mt7981-spim-snand-rfb";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac1;
|
||||
led-boot = &led_status_green;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_status_red;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_green: led@0 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status_red: led_1 {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
antctrl {
|
||||
/* Not sure if this pin does anything.
|
||||
* It was taken from GPL sources.
|
||||
* Intermediate image doesn't have it.
|
||||
*/
|
||||
gpio-export,name = "antctrl";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog-hw {
|
||||
compatible = "linux,wdt-gpio";
|
||||
gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
|
||||
hw_algo = "level";
|
||||
hw_margin_ms = <10000>;
|
||||
always-running;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_bdinfo_de00 1>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <52000000>;
|
||||
|
||||
spi-cal-enable;
|
||||
spi-cal-mode = "read-data";
|
||||
spi-cal-datalen = <7>;
|
||||
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
|
||||
spi-cal-addrlen = <5>;
|
||||
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x00000 0x0100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x0100000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x180000 0x0200000>;
|
||||
read-only;
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "bdinfo";
|
||||
reg = <0x380000 0x0040000>;
|
||||
read-only;
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_bdinfo_de00: macaddr@de00 {
|
||||
compatible = "mac-base";
|
||||
reg = <0xde00 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
partition@3C0000 {
|
||||
label = "FIP";
|
||||
reg = <0x3C0000 0x0200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x5C0000 0x4000000>;
|
||||
compatible = "linux,ubi";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&pio {
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
};
|
||||
@ -87,6 +87,7 @@ mediatek_setup_interfaces()
|
||||
mercusys,mr90x-v1)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
|
||||
;;
|
||||
cudy,ap3000outdoor-v1|\
|
||||
cudy,re3000-v1|\
|
||||
netgear,wax220|\
|
||||
ubnt,unifi-6-plus|\
|
||||
|
||||
@ -75,6 +75,7 @@ case "$board" in
|
||||
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
cudy,ap3000outdoor-v1|\
|
||||
cudy,m3000-v1|\
|
||||
cudy,wr3000-v1)
|
||||
addr=$(mtd_get_mac_binary bdinfo 0xde00)
|
||||
|
||||
@ -507,6 +507,23 @@ define Device/confiabits_mt7981
|
||||
endef
|
||||
TARGET_DEVICES += confiabits_mt7981
|
||||
|
||||
define Device/cudy_ap3000outdoor-v1
|
||||
DEVICE_VENDOR := Cudy
|
||||
DEVICE_MODEL := AP3000 Outdoor
|
||||
DEVICE_VARIANT := v1
|
||||
DEVICE_DTS := mt7981b-cudy-ap3000outdoor-v1
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
SUPPORTED_DEVICES += R51
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGE_SIZE := 65536k
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
||||
endef
|
||||
TARGET_DEVICES += cudy_ap3000outdoor-v1
|
||||
|
||||
define Device/cudy_m3000-v1
|
||||
DEVICE_VENDOR := Cudy
|
||||
DEVICE_MODEL := M3000
|
||||
|
||||
Loading…
Reference in New Issue
Block a user