From 181bc02d2e3e97bb6e535fd46fad750692408462 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Mon, 13 Feb 2017 06:25:35 +0100 Subject: [PATCH] rt2x00: mt7620: yet another beauty session So here is another round of improvements for MT7620 WiFi. This commit fixes a few significant issues related to TX_PWR_CFG_x and TX_ALC and also makes the code more readable by adding register descriptions for things added for MT7620 and use the usual bit-field access macros and the now defined macros instead of plain bit-ops and magic numbers. Properly describe EEPROM_TARGET_POWER at word 0x68 (== byte 0xD0) and thereby fix internal TXALC which would otherwise just read out-of-bounds of the EEPROM map. Split-out tx-power/ALC related stuff into an additional function. Fix VCO calibration, it was carried out properly in the channel switching but incomplete in the actual VCO calibration function. Also there is no need to trigger VCO calibration in channel switching, the VCO calibration function is already being called at this point. Remove it from channel switching function to avoid redundant code. The TX power calibration differs significantly from all other Mediatek/Ralink chips: They finally allow 0.5dB steps stored as 8-bit values for (almost) each bitrate -- and promptly ran out of space and for some reason didn't want to change the EEPROM layout. The hence opted for a scheme of sharing values for some adjecent bitrates and a highly over-complicated (or obfuscated?) way to populate the TX_PWR_CFG_x registers with the values stored in the EEPROM. The code here now looks much less complicated than what you see in the vendor's driver, however, it does the exact same thing: bGpwrdeltaMinus is a constant and always TRUE, hence half of the code was dead. Gpwrdelta is always 0 (rather than using the value read from the EEPROM). What remains is some very grotesque effort to avoid 0x20, probably some hardware bug related to some misunderstanding of what a singed 8-bit value is (imagine: if it was a signed 6-bit value then someone could believe that 0x20 == 0x0). And then they didn't clean it up once they later on anandonned that whole story of having a constant offset for 40 MHz channels and just set the offset to be constant 0 -- there is no effort for avoiding 0x20 for the 20 MHz values stored in the EEPROM, hence that's probably just a forbidden value in the EEPROM specs and won't appear anyway... Anyway, the whole thing felt like solving some college math test where in the end everything cancels out and the result equals 0 ;) To make sure that channel bandwidth power compensation really doesn't need to be taken care of, output a warning when the corresponding value stored in the EEPROM is non-zero. Also there is no apparent reason to refrain from initializing RFCSR register 13, it doesn't fail what-so-ever. Signed-off-by: Daniel Golle --- .../621-rt2x00-add-support-for-mt7620.patch | 695 +++++++++++++----- 1 file changed, 524 insertions(+), 171 deletions(-) diff --git a/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch b/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch index 41b75621371..c2ecf0ccc22 100644 --- a/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch +++ b/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch @@ -23,7 +23,7 @@ Signed-off-by: Daniel Golle #define RF_CSR_CFG_BUSY FIELD32(0x00020000) /* -+ * mt7620 RF registers (reversed order) ++ * MT7620 RF registers (reversed order) + */ +#define RF_CSR_CFG_DATA_MT7620 FIELD32(0x0000ff00) +#define RF_CSR_CFG_REGNUM_MT7620 FIELD32(0x03ff0000) @@ -34,45 +34,238 @@ Signed-off-by: Daniel Golle * EFUSE_CSR: RT30x0 EEPROM */ #define EFUSE_CTRL 0x0580 -@@ -1024,6 +1033,11 @@ +@@ -1024,6 +1033,16 @@ #define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) /* -+ * mt7620 ++ * MIMO_PS_CFG: MIMO Power-save Configuration + */ +#define MIMO_PS_CFG 0x1210 ++#define MIMO_PS_CFG_MMPS_BB_EN FIELD32(0x00000001) ++#define MIMO_PS_CFG_MMPS_RX_ANT_NUM FIELD32(0x00000006) ++#define MIMO_PS_CFG_MMPS_RF_EN FIELD32(0x00000008) ++#define MIMO_PS_CFG_RX_STBY_POL FIELD32(0x00000010) ++#define MIMO_PS_CFG_RX_RX_STBY0 FIELD32(0x00000020) + +/* * EDCA_AC0_CFG: */ #define EDCA_AC0_CFG 0x1300 -@@ -1203,6 +1217,8 @@ +@@ -1097,6 +1116,12 @@ + #define TX_PWR_CFG_0_OFDM6_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_0_OFDM12_CH0 FIELD32(0x0f000000) + #define TX_PWR_CFG_0_OFDM12_CH1 FIELD32(0xf0000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_0B_1MBS_2MBS FIELD32(0x000000ff) ++#define TX_PWR_CFG_0B_5MBS_11MBS FIELD32(0x0000ff00) ++#define TX_PWR_CFG_0B_6MBS_9MBS FIELD32(0x00ff0000) ++#define TX_PWR_CFG_0B_12MBS_18MBS FIELD32(0xff000000) ++ + + /* + * TX_PWR_CFG_1: +@@ -1119,6 +1144,11 @@ + #define TX_PWR_CFG_1_MCS0_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_1_MCS2_CH0 FIELD32(0x0f000000) + #define TX_PWR_CFG_1_MCS2_CH1 FIELD32(0xf0000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_1B_24MBS_36MBS FIELD32(0x000000ff) ++#define TX_PWR_CFG_1B_48MBS FIELD32(0x0000ff00) ++#define TX_PWR_CFG_1B_MCS0_MCS1 FIELD32(0x00ff0000) ++#define TX_PWR_CFG_1B_MCS2_MCS3 FIELD32(0xff000000) + + /* + * TX_PWR_CFG_2: +@@ -1141,6 +1171,11 @@ + #define TX_PWR_CFG_2_MCS8_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_2_MCS10_CH0 FIELD32(0x0f000000) + #define TX_PWR_CFG_2_MCS10_CH1 FIELD32(0xf0000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_2B_MCS4_MCS5 FIELD32(0x000000ff) ++#define TX_PWR_CFG_2B_MCS6_MCS7 FIELD32(0x0000ff00) ++#define TX_PWR_CFG_2B_MCS8_MCS9 FIELD32(0x00ff0000) ++#define TX_PWR_CFG_2B_MCS10_MCS11 FIELD32(0xff000000) + + /* + * TX_PWR_CFG_3: +@@ -1163,6 +1198,11 @@ + #define TX_PWR_CFG_3_STBC0_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_3_STBC2_CH0 FIELD32(0x0f000000) + #define TX_PWR_CFG_3_STBC2_CH1 FIELD32(0xf0000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_3B_MCS12_MCS13 FIELD32(0x000000ff) ++#define TX_PWR_CFG_3B_MCS14 FIELD32(0x0000ff00) ++#define TX_PWR_CFG_3B_STBC_MCS0_MCS1 FIELD32(0x00ff0000) ++#define TX_PWR_CFG_3B_STBC_MCS2_MSC3 FIELD32(0xff000000) + + /* + * TX_PWR_CFG_4: +@@ -1177,6 +1217,10 @@ + #define TX_PWR_CFG_3_STBC4_CH1 FIELD32(0x000000f0) + #define TX_PWR_CFG_3_STBC6_CH0 FIELD32(0x00000f00) + #define TX_PWR_CFG_3_STBC6_CH1 FIELD32(0x0000f000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_4B_STBC_MCS4_MCS5 FIELD32(0x000000ff) ++#define TX_PWR_CFG_4B_STBC_MCS6 FIELD32(0x0000ff00) ++ + + /* + * TX_PIN_CFG: +@@ -1203,6 +1247,8 @@ #define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) #define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) #define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) -+#define TX_PIN_CFG_RFRX_EN FIELD32(0x00100000) /* mt7620 */ -+#define TX_PIN_CFG_RFRX_POL FIELD32(0x00200000) /* mt7620 */ ++#define TX_PIN_CFG_RFRX_EN FIELD32(0x00100000) ++#define TX_PIN_CFG_RFRX_POL FIELD32(0x00200000) #define TX_PIN_CFG_PA_PE_A2_EN FIELD32(0x01000000) #define TX_PIN_CFG_PA_PE_G2_EN FIELD32(0x02000000) #define TX_PIN_CFG_PA_PE_A2_POL FIELD32(0x04000000) -@@ -1549,6 +1565,17 @@ +@@ -1549,6 +1595,95 @@ #define TX_PWR_CFG_4_EXT_STBC4_CH2 FIELD32(0x0000000f) #define TX_PWR_CFG_4_EXT_STBC6_CH2 FIELD32(0x00000f00) -+/* mt7620 */ ++/* TXn_RF_GAIN_CORRECT: RF Gain Correction for each RF_ALC[3:2] ++ * Unit: 0.1 dB, Range: -3.2 dB to 3.1 dB ++ */ +#define TX0_RF_GAIN_CORRECT 0x13a0 ++#define TX0_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f) ++#define TX0_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00) ++#define TX0_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000) ++#define TX0_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000) ++ +#define TX1_RF_GAIN_CORRECT 0x13a4 ++#define TX1_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f) ++#define TX1_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00) ++#define TX1_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000) ++#define TX1_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000) ++ ++/* TXn_RF_GAIN_ATTEN: TXn RF Gain Attenuation Level ++ * Format: 7-bit, signed value ++ * Unit: 0.5 dB, Range: -20 dB to -5 dB ++ */ +#define TX0_RF_GAIN_ATTEN 0x13a8 ++#define TX0_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f) ++#define TX0_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00) ++#define TX0_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000) ++#define TX0_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000) +#define TX1_RF_GAIN_ATTEN 0x13ac -+#define TX_ALG_CFG_0 0x13b0 -+#define TX_ALG_CFG_1 0x13b4 ++#define TX1_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f) ++#define TX1_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00) ++#define TX1_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000) ++#define TX1_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000) ++ ++/* TX_ALC_CFG_0: TX Automatic Level Control Configuration 0 ++ * TX_ALC_LIMIT_n: TXn upper limit ++ * TX_ALC_CH_INIT_n: TXn channel initial transmission gain ++ * Unit: 0.5 dB, Range: 0 to 23.5 dB ++ */ ++#define TX_ALC_CFG_0 0x13b0 ++#define TX_ALC_CFG_0_CH_INIT_0 FIELD32(0x0000003f) ++#define TX_ALC_CFG_0_CH_INIT_1 FIELD32(0x00003f00) ++#define TX_ALC_CFG_0_LIMIT_0 FIELD32(0x003f0000) ++#define TX_ALC_CFG_0_LIMIT_1 FIELD32(0x3f000000) ++ ++/* TX_ALC_CFG_1: TX Automatic Level Control Configuration 1 ++ * TX_TEMP_COMP: TX Power Temperature Compensation ++ * Unit: 0.5 dB, Range: -10 dB to 10 dB ++ * TXn_GAIN_FINE: TXn Gain Fine Adjustment ++ * Unit: 0.1 dB, Range: -0.8 dB to 0.7 dB ++ * RF_TOS_DLY: Sets the RF_TOS_EN assertion delay after ++ * deassertion of PA_PE. ++ * Unit: 0.25 usec ++ * TXn_RF_GAIN_ATTEN: TXn RF gain attentuation selector ++ * RF_TOS_TIMEOUT: time-out value for RF_TOS_ENABLE ++ * deassertion if RF_TOS_DONE is missing. ++ * Unit: 0.25 usec ++ * RF_TOS_ENABLE: TX offset calibration enable ++ * ROS_BUSY_EN: RX offset calibration busy enable ++ */ ++#define TX_ALC_CFG_1 0x13b4 ++#define TX_ALC_CFG_1_TX_TEMP_COMP FIELD32(0x0000003f) ++#define TX_ALC_CFG_1_TX0_GAIN_FINE FIELD32(0x00000f00) ++#define TX_ALC_CFG_1_TX1_GAIN_FINE FIELD32(0x0000f000) ++#define TX_ALC_CFG_1_RF_TOS_DLY FIELD32(0x00070000) ++#define TX_ALC_CFG_1_TX0_RF_GAIN_ATTEN FIELD32(0x00300000) ++#define TX_ALC_CFG_1_TX1_RF_GAIN_ATTEN FIELD32(0x00c00000) ++#define TX_ALC_CFG_1_RF_TOS_TIMEOUT FIELD32(0x3f000000) ++#define TX_ALC_CFG_1_RF_TOS_ENABLE FIELD32(0x40000000) ++#define TX_ALC_CFG_1_ROS_BUSY_EN FIELD32(0x80000000) ++ ++/* TXn_BB_GAIN_ATTEN: TXn RF Gain Attenuation Level ++ * Format: 5-bit signed values ++ * Unit: 0.5 dB, Range: -8 dB to 7 dB ++ */ +#define TX0_BB_GAIN_ATTEN 0x13c0 ++#define TX0_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f) ++#define TX0_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00) ++#define TX0_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000) ++#define TX0_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000) +#define TX1_BB_GAIN_ATTEN 0x13c4 ++#define TX1_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f) ++#define TX1_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00) ++#define TX1_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000) ++#define TX1_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000) ++ ++/* TX_ALC_VGA3: TX Automatic Level Correction Variable Gain Amplifier 3 */ +#define TX_ALC_VGA3 0x13c8 ++#define TX_ALC_VGA3_TX0_ALC_VGA3 FIELD32(0x0000001f) ++#define TX_ALC_VGA3_TX1_ALC_VGA3 FIELD32(0x00001f00) ++#define TX_ALC_VGA3_TX0_ALC_VGA2 FIELD32(0x001f0000) ++#define TX_ALC_VGA3_TX1_ALC_VGA2 FIELD32(0x1f000000) + /* TX_PWR_CFG_7 */ #define TX_PWR_CFG_7 0x13d4 #define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f) +@@ -1557,6 +1692,10 @@ + #define TX_PWR_CFG_7_MCS7_CH0 FIELD32(0x000f0000) + #define TX_PWR_CFG_7_MCS7_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_7_MCS7_CH2 FIELD32(0x0f000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_7B_54MBS FIELD32(0x000000ff) ++#define TX_PWR_CFG_7B_MCS7 FIELD32(0x00ff0000) ++ + + /* TX_PWR_CFG_8 */ + #define TX_PWR_CFG_8 0x13d8 +@@ -1566,12 +1705,17 @@ + #define TX_PWR_CFG_8_MCS23_CH0 FIELD32(0x000f0000) + #define TX_PWR_CFG_8_MCS23_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_8_MCS23_CH2 FIELD32(0x0f000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_8B_MCS15 FIELD32(0x000000ff) ++ + + /* TX_PWR_CFG_9 */ + #define TX_PWR_CFG_9 0x13dc + #define TX_PWR_CFG_9_STBC7_CH0 FIELD32(0x0000000f) + #define TX_PWR_CFG_9_STBC7_CH1 FIELD32(0x000000f0) + #define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff) + + /* + * TX_TXBF_CFG: +@@ -2175,6 +2319,12 @@ struct mac_iveiv_entry { + #define RFCSR3_BIT5 FIELD8(0x20) + + /* ++ * RFCSR 4: ++ * VCOCAL_EN used by MT7620 ++ */ ++#define RFCSR4_VCOCAL_EN FIELD8(0x80) ++ ++/* + * FRCSR 5: + */ + #define RFCSR5_R1 FIELD8(0x0c) +@@ -2450,6 +2600,7 @@ enum rt2800_eeprom_word { + EEPROM_TSSI_BOUND_BG5, + EEPROM_TXPOWER_A1, + EEPROM_TXPOWER_A2, ++ EEPROM_TXPOWER_INIT, + EEPROM_TSSI_BOUND_A1, + EEPROM_TSSI_BOUND_A2, + EEPROM_TSSI_BOUND_A3, --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -60,6 +60,9 @@ @@ -174,7 +367,8 @@ Signed-off-by: Daniel Golle - } + WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®); + } -+ + +- *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); + *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA_MT7620); + break; + @@ -184,8 +378,7 @@ Signed-off-by: Daniel Golle + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - -- *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); ++ + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + + WAIT_FOR_RFCSR(rt2x00dev, ®); @@ -207,7 +400,15 @@ Signed-off-by: Daniel Golle static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { -@@ -526,6 +592,16 @@ void rt2800_get_txwi_rxwi_size(struct rt +@@ -251,6 +317,7 @@ static const unsigned int rt2800_eeprom_ + [EEPROM_TSSI_BOUND_BG5] = 0x003b, + [EEPROM_TXPOWER_A1] = 0x003c, + [EEPROM_TXPOWER_A2] = 0x0053, ++ [EEPROM_TXPOWER_INIT] = 0x0068, + [EEPROM_TSSI_BOUND_A1] = 0x006a, + [EEPROM_TSSI_BOUND_A2] = 0x006b, + [EEPROM_TSSI_BOUND_A3] = 0x006c, +@@ -526,6 +593,16 @@ void rt2800_get_txwi_rxwi_size(struct rt *rxwi_size = RXWI_DESC_SIZE_5WORDS; break; @@ -224,7 +425,7 @@ Signed-off-by: Daniel Golle case RT5592: *txwi_size = TXWI_DESC_SIZE_5WORDS; *rxwi_size = RXWI_DESC_SIZE_6WORDS; -@@ -3258,6 +3334,296 @@ static void rt2800_config_channel_rf55xx +@@ -3258,6 +3335,258 @@ static void rt2800_config_channel_rf55xx rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F); } @@ -234,14 +435,8 @@ Signed-off-by: Daniel Golle + struct channel_info *info) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; -+ u32 mac_sys_ctrl, mac_status; -+ u16 eeprom, target_power; -+ u32 tx_pin = 0x00150F0F; + u8 txrx_agc_fc; + u8 rfcsr; -+ u32 reg; -+ u8 bbp; -+ int i; + + /* Frequeny plan setting */ + /* Rdiv setting (stored in rf->rf1) @@ -363,78 +558,98 @@ Signed-off-by: Daniel Golle + rfcsr &= (~0x4); + rt2800_rfcsr_write(rt2x00dev, 28, rfcsr); + -+ /*if (bScan == FALSE)*/ -+ if (conf_is_ht40(conf)) { -+ txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40, ++ if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) { ++ if (conf_is_ht40(conf)) { ++ txrx_agc_fc = rt2x00_get_field8( ++ drv_data->calibration_bw40, + RFCSR24_TX_AGC_FC); -+ } else { -+ txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw20, ++ } else { ++ txrx_agc_fc = rt2x00_get_field8( ++ drv_data->calibration_bw20, + RFCSR24_TX_AGC_FC); ++ } ++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 7, 6, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 6, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 7, 7, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 7, rfcsr); ++ ++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 7, 58, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 58, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 7, 59, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr); + } -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 6, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 6, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 7, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 7, rfcsr); ++} + -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 58, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 58, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 59, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr); ++static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_channel *chan, ++ int power_level) { ++ u16 eeprom, target_power, max_power; ++ u32 mac_sys_ctrl, mac_status; ++ u32 reg; ++ u8 bbp; ++ int i; + -+ rt2800_register_read(rt2x00dev, TX_ALG_CFG_0, ®); -+ reg = reg & (~0x3F3F); -+ reg |= info->default_power1; -+ reg |= (info->default_power2 << 8); -+ reg |= (0x2F << 16); -+ reg |= (0x2F << 24); ++ /* hardware unit is 0.5dBm, limited to 23.5dBm */ ++ power_level *= 2; ++ if (power_level > 0x2f) ++ power_level = 0x2f; ++ ++ max_power = chan->max_power * 2; ++ if (max_power > 0x2f) ++ max_power = 0x2f; ++ ++ rt2800_register_read(rt2x00dev, TX_ALC_CFG_0, ®); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, power_level); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, power_level); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_0, max_power); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_1, max_power); + + rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_INTERNAL_TX_ALC)) { -+ /* init base power by e2p target power */ -+ rt2800_eeprom_read(rt2x00dev, 0xD0, &target_power); -+ target_power &= 0x3F; -+ reg = reg & (~0x3F3F); -+ reg |= target_power; -+ reg |= (target_power << 8); ++ /* init base power by eeprom target power */ ++ rt2800_eeprom_read(rt2x00dev, EEPROM_TXPOWER_INIT, ++ &target_power); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, target_power); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, target_power); + } -+ rt2800_register_write(rt2x00dev, TX_ALG_CFG_0, reg); ++ rt2800_register_write(rt2x00dev, TX_ALC_CFG_0, reg); + -+ rt2800_register_read(rt2x00dev, TX_ALG_CFG_1, ®); -+ reg = reg & (~0x3F); -+ rt2800_register_write(rt2x00dev, TX_ALG_CFG_1, reg); ++ rt2800_register_read(rt2x00dev, TX_ALC_CFG_1, ®); ++ rt2x00_set_field32(®, TX_ALC_CFG_1_TX_TEMP_COMP, 0); ++ rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg); + -+ /*if (bScan == FALSE)*/ + /* Save MAC SYS CTRL registers */ + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &mac_sys_ctrl); + /* Disable Tx/Rx */ + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + /* Check MAC Tx/Rx idle */ + for (i = 0; i < 10000; i++) { -+ rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, &mac_status); ++ rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, ++ &mac_status); + if (mac_status & 0x3) + usleep_range(50, 200); + else @@ -444,7 +659,7 @@ Signed-off-by: Daniel Golle + if (i == 10000) + rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n"); + -+ if (rf->channel > 10) { ++ if (chan->center_freq > 2457) { + rt2800_bbp_read(rt2x00dev, 30, &bbp); + bbp = 0x40; + rt2800_bbp_write(rt2x00dev, 30, bbp); @@ -463,65 +678,13 @@ Signed-off-by: Daniel Golle + else + rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); + } -+ + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl); -+ -+ rt2800_rfcsr_write(rt2x00dev, 5, 0x40); -+ rt2800_rfcsr_write(rt2x00dev, 4, 0x0C); -+ -+ /* vcocal_en (initiate VCO calibration (reset after completion)) */ -+ rt2800_rfcsr_read(rt2x00dev, 4, &rfcsr); -+ rfcsr = ((rfcsr & ~0x80) | 0x80); -+ rt2800_rfcsr_write(rt2x00dev, 4, rfcsr); -+ usleep_range(2000, 3000); -+ -+ rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); -+ -+ if (rt2x00dev->default_ant.tx_chain_num == 1) { -+ rt2800_bbp_write(rt2x00dev, 91, 0x07); -+ rt2800_bbp_write(rt2x00dev, 95, 0x1A); -+ rt2800_bbp_write(rt2x00dev, 195, 128); -+ rt2800_bbp_write(rt2x00dev, 196, 0xA0); -+ rt2800_bbp_write(rt2x00dev, 195, 170); -+ rt2800_bbp_write(rt2x00dev, 196, 0x12); -+ rt2800_bbp_write(rt2x00dev, 195, 171); -+ rt2800_bbp_write(rt2x00dev, 196, 0x10); -+ } else { -+ rt2800_bbp_write(rt2x00dev, 91, 0x06); -+ rt2800_bbp_write(rt2x00dev, 95, 0x9A); -+ rt2800_bbp_write(rt2x00dev, 195, 128); -+ rt2800_bbp_write(rt2x00dev, 196, 0xE0); -+ rt2800_bbp_write(rt2x00dev, 195, 170); -+ rt2800_bbp_write(rt2x00dev, 196, 0x30); -+ rt2800_bbp_write(rt2x00dev, 195, 171); -+ rt2800_bbp_write(rt2x00dev, 196, 0x30); -+ } -+ -+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { -+ rt2800_bbp_write(rt2x00dev, 75, 0x60); -+ rt2800_bbp_write(rt2x00dev, 76, 0x44); -+ rt2800_bbp_write(rt2x00dev, 79, 0x1C); -+ rt2800_bbp_write(rt2x00dev, 80, 0x0C); -+ rt2800_bbp_write(rt2x00dev, 82, 0xB6); -+ -+ if (!conf_is_ht40(conf)) { -+ rt2800_bbp_write(rt2x00dev, 195, 141); -+ rt2800_bbp_write(rt2x00dev, 196, 0x1A); -+ } -+ } -+ -+ /* On 11A, We should delay and wait RF/BBP to be stable -+ * and the appropriate time should be 1000 micro seconds -+ * 2005/06/05 - On 11G, we also need this delay time. -+ * Otherwise it's difficult to pass the WHQL. -+ */ -+ usleep_range(1000, 1500); +} + static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) -@@ -3414,7 +3780,7 @@ static void rt2800_config_channel(struct +@@ -3414,7 +3743,7 @@ static void rt2800_config_channel(struct struct channel_info *info) { u32 reg; @@ -530,7 +693,7 @@ Signed-off-by: Daniel Golle u8 bbp, rfcsr; info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel, -@@ -3468,6 +3834,9 @@ static void rt2800_config_channel(struct +@@ -3468,6 +3797,9 @@ static void rt2800_config_channel(struct case RF5592: rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info); break; @@ -540,7 +703,7 @@ Signed-off-by: Daniel Golle default: rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); } -@@ -3574,7 +3943,7 @@ static void rt2800_config_channel(struct +@@ -3574,7 +3906,7 @@ static void rt2800_config_channel(struct else if (rt2x00_rt(rt2x00dev, RT3593) || rt2x00_rt(rt2x00dev, RT3883)) rt2800_bbp_write(rt2x00dev, 82, 0x82); @@ -549,7 +712,7 @@ Signed-off-by: Daniel Golle rt2800_bbp_write(rt2x00dev, 82, 0xf2); if (rt2x00_rt(rt2x00dev, RT3593) || -@@ -3596,7 +3965,7 @@ static void rt2800_config_channel(struct +@@ -3596,7 +3928,7 @@ static void rt2800_config_channel(struct if (rt2x00_rt(rt2x00dev, RT3572)) rt2800_rfcsr_write(rt2x00dev, 8, 0); @@ -558,7 +721,7 @@ Signed-off-by: Daniel Golle switch (rt2x00dev->default_ant.tx_chain_num) { case 3: -@@ -3645,6 +4014,7 @@ static void rt2800_config_channel(struct +@@ -3645,6 +3977,7 @@ static void rt2800_config_channel(struct rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); @@ -566,7 +729,7 @@ Signed-off-by: Daniel Golle rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); -@@ -3720,7 +4090,8 @@ static void rt2800_config_channel(struct +@@ -3720,7 +4053,8 @@ static void rt2800_config_channel(struct usleep_range(1000, 1500); } @@ -576,23 +739,222 @@ Signed-off-by: Daniel Golle rt2800_bbp_write(rt2x00dev, 195, 141); rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a); -@@ -4662,6 +5033,15 @@ void rt2800_vco_calibration(struct rt2x0 +@@ -4410,6 +4744,128 @@ static void rt2800_config_txpower_rt3593 + (unsigned long) regs[i]); + } + ++static void rt2800_config_txpower_mt7620(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_channel *chan, ++ int power_level) ++{ ++ u32 reg, pwreg; ++ u16 eeprom; ++ u32 data, gdata; ++ u8 t, i; ++ enum nl80211_band band = chan->band; ++ int delta; ++ ++ /* Warn user if bw_comp is set in EEPROM */ ++ delta = rt2800_get_txpower_bw_comp(rt2x00dev, band); ++ ++ if (delta) ++ rt2x00_warn(rt2x00dev, "ignoring EEPROM HT40 power delta: %d\n", ++ delta); ++ ++ /* populate TX_PWR_CFG_0 up to TX_PWR_CFG_4 from EEPROM for HT40, limit ++ * value to 0x3f and replace 0x20 by 0x21 as this is what the vendor ++ * driver does as well, though it looks kinda wrong. ++ * Maybe some misunderstanding of what a signed 8-bit value is? Maybe ++ * the hardware has a problem handling 0x20, and as the code initially ++ * used a fixed offset between HT20 and HT40 rates they had to work- ++ * around that issue and most likely just forgot about it later on. ++ * Maybe we should use rt2800_get_txpower_bw_comp() here as well, ++ * however, the corresponding EEPROM value is not respected by the ++ * vendor driver, so maybe this is rather being taken care of the ++ * TXALC and the driver doesn't need to handle it...? ++ * Though this is all very awkward, just do as they did, as that's what ++ * board vendors expected when they populated the EEPROM... ++ */ ++ for (i = 0; i < 5; i++) { ++ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, ++ i * 2, &eeprom); ++ ++ data = eeprom; ++ ++ t = eeprom & 0x3f; ++ if (t == 32) ++ t++; ++ ++ gdata = t; ++ ++ t = (eeprom & 0x3f00) >> 8; ++ if (t == 32) ++ t++; ++ ++ gdata |= (t << 8); ++ ++ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, ++ (i * 2) + 1, &eeprom); ++ ++ t = eeprom & 0x3f; ++ if (t == 32) ++ t++; ++ ++ gdata |= (t << 16); ++ ++ t = (eeprom & 0x3f00) >> 8; ++ if (t == 32) ++ t++; ++ ++ gdata |= (t << 24); ++ data |= (eeprom << 16); ++ ++ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) { ++ /* HT20 */ ++ if (data != 0xffffffff) ++ rt2800_register_write(rt2x00dev, ++ TX_PWR_CFG_0 + (i * 4), ++ data); ++ } else { ++ /* HT40 */ ++ if (gdata != 0xffffffff) ++ rt2800_register_write(rt2x00dev, ++ TX_PWR_CFG_0 + (i * 4), ++ gdata); ++ } ++ } ++ ++ /* Aparently Ralink ran out of space in the BYRATE calibration section ++ * of the EERPOM which is copied to the corresponding TX_PWR_CFG_x ++ * registers. As recent 2T chips use 8-bit instead of 4-bit values for ++ * power-offsets more space would be needed. Ralink decided to rather ++ * keep the EEPROM layout untouched and rather have some shared values ++ * covering multiple bitrates. ++ * Populate the registers not covered by the EEPROM in the same way the ++ * vendor driver does. ++ */ ++ ++ /* For OFDM 54MBS use value from OFDM 48MBS */ ++ pwreg = 0; ++ rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®); ++ t = rt2x00_get_field32(reg, TX_PWR_CFG_1B_48MBS); ++ rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_54MBS, t); ++ ++ /* For MCS 7 use value from MCS 6 */ ++ rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®); ++ t = rt2x00_get_field32(reg, TX_PWR_CFG_2B_MCS6_MCS7); ++ rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_MCS7, t); ++ rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, pwreg); ++ ++ /* For MCS 15 use value from MCS 14 */ ++ pwreg = 0; ++ rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®); ++ t = rt2x00_get_field32(reg, TX_PWR_CFG_3B_MCS14); ++ rt2x00_set_field32(&pwreg, TX_PWR_CFG_8B_MCS15, t); ++ rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, pwreg); ++ ++ /* For STBC MCS 7 use value from STBC MCS 6 */ ++ pwreg = 0; ++ rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®); ++ t = rt2x00_get_field32(reg, TX_PWR_CFG_4B_STBC_MCS6); ++ rt2x00_set_field32(&pwreg, TX_PWR_CFG_9B_STBC_MCS7, t); ++ rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, pwreg); ++ ++ rt2800_config_alc(rt2x00dev, chan, power_level); ++ ++ /* TODO: temperature compensation code! */ ++} ++ + /* + * We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and + * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values, +@@ -4607,6 +5063,8 @@ static void rt2800_config_txpower(struct + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level); ++ else if (rt2x00_rf(rt2x00dev, RF7620)) ++ rt2800_config_txpower_mt7620(rt2x00dev, chan, power_level); + else + rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level); + } +@@ -4622,6 +5080,7 @@ void rt2800_vco_calibration(struct rt2x0 + { + u32 tx_pin; + u8 rfcsr; ++ unsigned long min_sleep = 0; + + /* + * A voltage-controlled oscillator(VCO) is an electronic oscillator +@@ -4661,6 +5120,15 @@ void rt2800_vco_calibration(struct rt2x0 + rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); - break; -+ case RF7620: -+ rt2800_rfcsr_read(rt2x00dev, 4, &rfcsr); -+ /* vcocal_en (initiate VCO calibration (reset after completion)) -+ * It should be at the end of RF configuration. -+ */ -+ rfcsr = ((rfcsr & ~0x80) | 0x80); -+ rt2800_rfcsr_write(rt2x00dev, 4, rfcsr); -+ usleep_range(2000, 3000); ++ min_sleep = 1000; + break; ++ case RF7620: ++ rt2800_rfcsr_write(rt2x00dev, 5, 0x40); ++ rt2800_rfcsr_write(rt2x00dev, 4, 0x0C); ++ rt2800_rfcsr_read(rt2x00dev, 4, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR4_VCOCAL_EN, 1); ++ rt2800_rfcsr_write(rt2x00dev, 4, rfcsr); ++ min_sleep = 2000; + break; default: WARN_ONCE(1, "Not supported RF chipet %x for VCO recalibration", - rt2x00dev->chip.rf); -@@ -5037,6 +5417,24 @@ static int rt2800_init_registers(struct +@@ -4668,7 +5136,8 @@ void rt2800_vco_calibration(struct rt2x0 + return; + } + +- usleep_range(1000, 1500); ++ if (min_sleep > 0) ++ usleep_range(min_sleep, min_sleep * 2); + + rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin); + if (rt2x00dev->rf_channel <= 14) { +@@ -4700,6 +5169,42 @@ void rt2800_vco_calibration(struct rt2x0 + } + rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + ++ if (rt2x00_rf(rt2x00dev, RF7620)) { ++ if (rt2x00dev->default_ant.tx_chain_num == 1) { ++ rt2800_bbp_write(rt2x00dev, 91, 0x07); ++ rt2800_bbp_write(rt2x00dev, 95, 0x1A); ++ rt2800_bbp_write(rt2x00dev, 195, 128); ++ rt2800_bbp_write(rt2x00dev, 196, 0xA0); ++ rt2800_bbp_write(rt2x00dev, 195, 170); ++ rt2800_bbp_write(rt2x00dev, 196, 0x12); ++ rt2800_bbp_write(rt2x00dev, 195, 171); ++ rt2800_bbp_write(rt2x00dev, 196, 0x10); ++ } else { ++ rt2800_bbp_write(rt2x00dev, 91, 0x06); ++ rt2800_bbp_write(rt2x00dev, 95, 0x9A); ++ rt2800_bbp_write(rt2x00dev, 195, 128); ++ rt2800_bbp_write(rt2x00dev, 196, 0xE0); ++ rt2800_bbp_write(rt2x00dev, 195, 170); ++ rt2800_bbp_write(rt2x00dev, 196, 0x30); ++ rt2800_bbp_write(rt2x00dev, 195, 171); ++ rt2800_bbp_write(rt2x00dev, 196, 0x30); ++ } ++ ++ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { ++ rt2800_bbp_write(rt2x00dev, 75, 0x60); ++ rt2800_bbp_write(rt2x00dev, 76, 0x44); ++ rt2800_bbp_write(rt2x00dev, 79, 0x1C); ++ rt2800_bbp_write(rt2x00dev, 80, 0x0C); ++ rt2800_bbp_write(rt2x00dev, 82, 0xB6); ++ } ++ ++ /* On 11A, We should delay and wait RF/BBP to be stable ++ * and the appropriate time should be 1000 micro seconds ++ * 2005/06/05 - On 11G, we also need this delay time. ++ * Otherwise it's difficult to pass the WHQL. ++ */ ++ usleep_range(1000, 1500); ++ } + } + EXPORT_SYMBOL_GPL(rt2800_vco_calibration); + +@@ -5037,6 +5542,24 @@ static int rt2800_init_registers(struct rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000); rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21); rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40); @@ -611,13 +973,13 @@ Signed-off-by: Daniel Golle + 0x3630363A); + rt2800_register_write(rt2x00dev, TX1_RF_GAIN_CORRECT, + 0x3630363A); -+ rt2800_register_read(rt2x00dev, TX_ALG_CFG_1, ®); -+ reg = reg & (~0x80000000); -+ rt2800_register_write(rt2x00dev, TX_ALG_CFG_1, reg); ++ rt2800_register_read(rt2x00dev, TX_ALC_CFG_1, ®); ++ rt2x00_set_field32(®, TX_ALC_CFG_1_ROS_BUSY_EN, 0); ++ rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg); } else if (rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392)) { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); -@@ -6075,6 +6473,225 @@ static void rt2800_init_bbp_5592(struct +@@ -6075,6 +6598,224 @@ static void rt2800_init_bbp_5592(struct rt2800_bbp_write(rt2x00dev, 103, 0xc0); } @@ -646,7 +1008,6 @@ Signed-off-by: Daniel Golle + rt2800_bbp_write(rt2x00dev, 105, bbp); + + /* Avoid data loss and CRC errors */ -+ /* MAC interface control (MAC_IF_80M, 1: 80 MHz) */ + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + /* Fix I/Q swap issue */ @@ -732,7 +1093,7 @@ Signed-off-by: Daniel Golle + + /* BBP for G band GLRT function (BBP_128 ~ BBP_221) */ + rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00); -+ rt2800_bbp_glrt_write(rt2x00dev, 1, 0x14); /* ? see above */ ++ rt2800_bbp_glrt_write(rt2x00dev, 1, 0x14); + rt2800_bbp_glrt_write(rt2x00dev, 2, 0x20); + rt2800_bbp_glrt_write(rt2x00dev, 3, 0x0A); + rt2800_bbp_glrt_write(rt2x00dev, 10, 0x16); @@ -843,7 +1204,7 @@ Signed-off-by: Daniel Golle static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) { unsigned int i; -@@ -6117,7 +6734,10 @@ static void rt2800_init_bbp(struct rt2x0 +@@ -6117,7 +6858,10 @@ static void rt2800_init_bbp(struct rt2x0 return; case RT5390: case RT5392: @@ -855,29 +1216,26 @@ Signed-off-by: Daniel Golle break; case RT5592: rt2800_init_bbp_5592(rt2x00dev); -@@ -7331,6 +7951,277 @@ static void rt2800_init_rfcsr_5592(struc +@@ -7331,6 +8075,269 @@ static void rt2800_init_rfcsr_5592(struc rt2800_led_open_drain_enable(rt2x00dev); } +static void rt2800_init_rfcsr_7620(struct rt2x00_dev *rt2x00dev) +{ -+ u8 rfvalue; -+ u16 freq; -+ + /* Initialize RF central register to default value */ + rt2800_rfcsr_write(rt2x00dev, 0, 0x02); + rt2800_rfcsr_write(rt2x00dev, 1, 0x03); + rt2800_rfcsr_write(rt2x00dev, 2, 0x33); + rt2800_rfcsr_write(rt2x00dev, 3, 0xFF); + rt2800_rfcsr_write(rt2x00dev, 4, 0x0C); -+ rt2800_rfcsr_write(rt2x00dev, 5, 0x40); /* Read only */ ++ rt2800_rfcsr_write(rt2x00dev, 5, 0x40); + rt2800_rfcsr_write(rt2x00dev, 6, 0x00); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 8, 0x00); + rt2800_rfcsr_write(rt2x00dev, 9, 0x00); + rt2800_rfcsr_write(rt2x00dev, 10, 0x00); + rt2800_rfcsr_write(rt2x00dev, 11, 0x00); -+ /* rt2800_rfcsr_write(rt2x00dev, 12, 0x43); *//* EEPROM */ ++ rt2800_rfcsr_write(rt2x00dev, 12, rt2x00dev->freq_offset); + rt2800_rfcsr_write(rt2x00dev, 13, 0x00); + rt2800_rfcsr_write(rt2x00dev, 14, 0x40); + rt2800_rfcsr_write(rt2x00dev, 15, 0x22); @@ -936,11 +1294,6 @@ Signed-off-by: Daniel Golle + rt2800_rfcsr_write(rt2x00dev, 29, 0xAD); + rt2800_rfcsr_write(rt2x00dev, 39, 0x80); + -+ /* use rt2800_adjust_freq_offset ? */ -+ rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ, &freq); -+ rfvalue = freq & 0xff; -+ rt2800_rfcsr_write(rt2x00dev, 12, rfvalue); -+ + /* Initialize RF channel register to default value */ + rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03); + rt2800_rfcsr_write_chanreg(rt2x00dev, 1, 0x00); @@ -955,7 +1308,7 @@ Signed-off-by: Daniel Golle + rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x61); + rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53); + rt2800_rfcsr_write_chanreg(rt2x00dev, 12, 0x22); -+ /* rt2800_rfcsr_write_chanreg(rt2x00dev, 13, 0x3D); */ /* fails */ ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 13, 0x3D); + rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06); + rt2800_rfcsr_write_chanreg(rt2x00dev, 15, 0x13); + rt2800_rfcsr_write_chanreg(rt2x00dev, 16, 0x22); @@ -1133,7 +1486,7 @@ Signed-off-by: Daniel Golle static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) { if (rt2800_is_305x_soc(rt2x00dev)) { -@@ -7366,7 +8257,10 @@ static void rt2800_init_rfcsr(struct rt2 +@@ -7366,7 +8373,10 @@ static void rt2800_init_rfcsr(struct rt2 rt2800_init_rfcsr_5350(rt2x00dev); break; case RT5390: @@ -1145,7 +1498,7 @@ Signed-off-by: Daniel Golle break; case RT5392: rt2800_init_rfcsr_5392(rt2x00dev); -@@ -7780,6 +8674,7 @@ static int rt2800_init_eeprom(struct rt2 +@@ -7780,6 +8790,7 @@ static int rt2800_init_eeprom(struct rt2 case RF5390: case RF5392: case RF5592: @@ -1153,7 +1506,7 @@ Signed-off-by: Daniel Golle break; default: rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n", -@@ -8258,6 +9153,24 @@ static const struct rf_channel rf_vals_5 +@@ -8258,6 +9269,24 @@ static const struct rf_channel rf_vals_5 {196, 83, 0, 12, 1}, }; @@ -1178,7 +1531,7 @@ Signed-off-by: Daniel Golle static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; -@@ -8361,6 +9274,11 @@ static int rt2800_probe_hw_mode(struct r +@@ -8361,6 +9390,11 @@ static int rt2800_probe_hw_mode(struct r spec->channels = rf_vals_3x; break; @@ -1190,7 +1543,7 @@ Signed-off-by: Daniel Golle case RF3052: case RF3053: spec->num_channels = ARRAY_SIZE(rf_vals_3x); -@@ -8498,6 +9416,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -8498,6 +9532,7 @@ static int rt2800_probe_hw_mode(struct r case RF5390: case RF5392: case RF5592: