generic: add patch for GPON-ONU-34-20BI quirk

Backport patch merged upstream adding quirk for SFP GPON-ONU-34-20BI.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 86dadeba48)

target/linux/generic/backport-5.15/798-net-next-net-sfp-add-quirk-for-Fiberstone-GPON-ONU-34-20BI.patch

@@ -0,0 +1,34 @@
+From d387e34fec407f881fdf165b5d7ec128ebff362f Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Tue, 19 Sep 2023 14:47:20 +0200
+Subject: [PATCH] net: sfp: add quirk for Fiberstone GPON-ONU-34-20BI
+
+Fiberstone GPON-ONU-34-20B can operate at 2500base-X, but report 1.2GBd
+NRZ in their EEPROM.
+
+The module also require the ignore tx fault fixup similar to Huawei MA5671A
+as it gets disabled on error messages with serial redirection enabled.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Link: https://lore.kernel.org/r/20230919124720.8210-1-ansuelsmth@gmail.com
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/phy/sfp.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -368,6 +368,13 @@ static const struct sfp_quirk sfp_quirks
+ 		.modes = sfp_quirk_2500basex,
+ 		.fixup = sfp_fixup_long_startup,
+ 	}, {
++		// Fiberstore GPON-ONU-34-20BI can operate at 2500base-X, but report 1.2GBd
++		// NRZ in their EEPROM
++		.vendor = "FS",
++		.part = "GPON-ONU-34-20BI",
++		.modes = sfp_quirk_2500basex,
++		.fixup = sfp_fixup_ignore_tx_fault,
++	}, {
+ 		.vendor = "HALNy",
+ 		.part = "HL-GSFP",
+ 		.fixup = sfp_fixup_halny_gsfp,

target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch

@@ -26,7 +26,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 
 --- a/drivers/net/phy/sfp.c
 +++ b/drivers/net/phy/sfp.c
-@@ -383,6 +383,11 @@ static const struct sfp_quirk sfp_quirks
+@@ -390,6 +390,11 @@ static const struct sfp_quirk sfp_quirks
  		.modes = sfp_quirk_2500basex,
  		.fixup = sfp_fixup_ignore_tx_fault,
  	}, {
@@ -38,7 +38,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  		// Lantech 8330-262D-E can operate at 2500base-X, but
  		// incorrectly report 2500MBd NRZ in their EEPROM
  		.vendor = "Lantech",
-@@ -2312,7 +2317,8 @@ static void sfp_sm_main(struct sfp *sfp,
+@@ -2319,7 +2324,8 @@ static void sfp_sm_main(struct sfp *sfp,
  			 * or t_start_up, so assume there is a fault.
  			 */
  			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
@@ -48,7 +48,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
  	init_done:
  			sfp->sm_phy_retries = R_PHY_RETRY;
-@@ -2535,10 +2541,12 @@ static void sfp_check_state(struct sfp *
+@@ -2542,10 +2548,12 @@ static void sfp_check_state(struct sfp *
  	mutex_lock(&sfp->st_mutex);
  	state = sfp_get_state(sfp);
  	changed = state ^ sfp->state;

target/linux/realtek/patches-5.15/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch

@@ -10,7 +10,7 @@ Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
 
 --- a/drivers/net/phy/sfp.c
 +++ b/drivers/net/phy/sfp.c
-@@ -2153,6 +2153,13 @@ static void sfp_sm_module(struct sfp *sf
+@@ -2160,6 +2160,13 @@ static void sfp_sm_module(struct sfp *sf
  		return;
  	}
  

target/linux/realtek/patches-5.15/712-net-phy-sfp-add-support-for-SMBus.patch

@@ -10,7 +10,7 @@ Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
 
 --- a/drivers/net/phy/sfp.c
 +++ b/drivers/net/phy/sfp.c
-@@ -549,32 +549,72 @@ static int sfp_i2c_write(struct sfp *sfp
+@@ -556,32 +556,72 @@ static int sfp_i2c_write(struct sfp *sfp
  	return ret == ARRAY_SIZE(msgs) ? len : 0;
  }