kernel: bump 4.14 to 4.14.48 for 18.06

Refreshed patches. The following patches were upstreamed and have been deleted:

* target/linux/lantiq/patches-4.14/0025-MIPS-lantiq-gphy-Remove-reboot-remove-reset-asserts.patch
* target/linux/generic/pending-4.14/101-clocksource-mips-gic-timer-fix-clocksource-counter-w.patch
* target/linux/generic/pending-4.14/103-MIPS-c-r4k-fix-data-corruption-related-to-cache-coherence.patch
* target/linux/generic/pending-4.14/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch

Compile-tested: ramips/mt7621, x86/64
Run-tested: ramips/mt7621

Signed-off-by: Stijn Segers <foss@volatilesystems.org>

include/kernel-version.mk

@@ -5,12 +5,12 @@ LINUX_RELEASE?=1
 LINUX_VERSION-3.18 = .71
 LINUX_VERSION-4.4 = .121
 LINUX_VERSION-4.9 = .106
-LINUX_VERSION-4.14 = .43
+LINUX_VERSION-4.14 = .48
 
 LINUX_KERNEL_HASH-3.18.71 = 5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240
 LINUX_KERNEL_HASH-4.4.121 = 44a88268b5088dc326b30c9b9133ac35a9a200b636b7268d08f32abeae6ca729
 LINUX_KERNEL_HASH-4.9.106 = 2d409bb29588ea9a61bae006255ee97a675ded364c87a9ff43f687c5271bbe3c
-LINUX_KERNEL_HASH-4.14.43 = 133fc0f8f9ea04006c255a052704e8eb95a021fc799dd27f98fcfcace59e714a
+LINUX_KERNEL_HASH-4.14.48 = 80a0608f611fe7a5c54556402cdc2880a21301e1c4e1b19d4c1db82ad2bf22b9
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch

@@ -44,7 +44,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
  
  #include "xhci.h"
  #include "xhci-trace.h"
-@@ -244,6 +246,458 @@ static void xhci_pme_acpi_rtd3_enable(st
+@@ -255,6 +257,458 @@ static void xhci_pme_acpi_rtd3_enable(st
  static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
  #endif /* CONFIG_ACPI */
  
@@ -503,7 +503,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
  /* called during probe() after chip reset completes */
  static int xhci_pci_setup(struct usb_hcd *hcd)
  {
-@@ -279,6 +733,22 @@ static int xhci_pci_probe(struct pci_dev
+@@ -290,6 +744,22 @@ static int xhci_pci_probe(struct pci_dev
  	struct hc_driver *driver;
  	struct usb_hcd *hcd;
  
@@ -526,7 +526,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
  	driver = (struct hc_driver *)id->driver_data;
  
  	/* For some HW implementation, a XHCI reset is just not enough... */
-@@ -343,6 +813,16 @@ static void xhci_pci_remove(struct pci_d
+@@ -354,6 +824,16 @@ static void xhci_pci_remove(struct pci_d
  {
  	struct xhci_hcd *xhci;
  

target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch

@@ -13,7 +13,7 @@ produce a noisy warning.
 
 --- a/drivers/usb/host/xhci-pci.c
 +++ b/drivers/usb/host/xhci-pci.c
-@@ -202,7 +202,7 @@ static void xhci_pci_quirks(struct devic
+@@ -213,7 +213,7 @@ static void xhci_pci_quirks(struct devic
  		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
  	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
  			pdev->device == 0x0015)

target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch

@@ -129,7 +129,7 @@ it on BCM4708 family.
 +++ b/drivers/usb/host/xhci.h
 @@ -1831,6 +1831,7 @@ struct xhci_hcd {
  #define XHCI_LIMIT_ENDPOINT_INTERVAL_7	(1 << 26)
- /* Reserved. It was XHCI_U2_DISABLE_WAKE */
+ #define XHCI_U2_DISABLE_WAKE	(1 << 27)
  #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL	(1 << 28)
 +#define XHCI_FAKE_DOORBELL	(1 << 29)
  #define XHCI_SUSPEND_DELAY	(1 << 30)

target/linux/generic/backport-4.14/011-kbuild-export-SUBARCH.patch

@@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/Makefile
 +++ b/Makefile
-@@ -433,8 +433,8 @@ KBUILD_CFLAGS_MODULE  := -DMODULE
+@@ -428,8 +428,8 @@ KBUILD_CFLAGS_MODULE  := -DMODULE
  KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
  GCC_PLUGINS_CFLAGS :=
  

target/linux/generic/backport-4.14/272-uapi-if_ether.h-prevent-redefinition-of-struct-ethhd.patch

@@ -26,7 +26,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  
  /*
   *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
-@@ -149,11 +150,13 @@
+@@ -150,11 +151,13 @@
   *	This is an Ethernet frame header.
   */
  

target/linux/generic/backport-4.14/336-v4.15-netfilter-exit_net-cleanup-check-added.patch

@@ -11,7 +11,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
 
 --- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
 +++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
-@@ -829,6 +829,7 @@ static void clusterip_net_exit(struct ne
+@@ -834,6 +834,7 @@ static void clusterip_net_exit(struct ne
  	cn->procdir = NULL;
  #endif
  	nf_unregister_net_hook(net, &cip_arp_ops);

target/linux/generic/hack-4.14/202-reduce_module_size.patch

@@ -13,7 +13,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/Makefile
 +++ b/Makefile
-@@ -430,7 +430,7 @@ KBUILD_AFLAGS_KERNEL :=
+@@ -425,7 +425,7 @@ KBUILD_AFLAGS_KERNEL :=
  KBUILD_CFLAGS_KERNEL :=
  KBUILD_AFLAGS_MODULE  := -DMODULE
  KBUILD_CFLAGS_MODULE  := -DMODULE

target/linux/generic/hack-4.14/207-disable-modorder.patch

@@ -15,7 +15,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/Makefile
 +++ b/Makefile
-@@ -1233,7 +1233,6 @@ all: modules
+@@ -1227,7 +1227,6 @@ all: modules
  
  PHONY += modules
  modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
@@ -23,7 +23,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	@$(kecho) '  Building modules, stage 2.';
  	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  
-@@ -1262,7 +1261,6 @@ _modinst_:
+@@ -1256,7 +1255,6 @@ _modinst_:
  		rm -f $(MODLIB)/build ; \
  		ln -s $(CURDIR) $(MODLIB)/build ; \
  	fi

target/linux/generic/hack-4.14/220-gc_sections.patch

@@ -33,7 +33,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  # Read KERNELRELEASE from include/config/kernel.release (if it exists)
  KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
  KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
-@@ -787,11 +792,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
+@@ -781,11 +786,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
  KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
  endif
  

target/linux/generic/hack-4.14/773-bgmac-add-srab-switch.patch

@@ -32,7 +32,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  #include <linux/bcm47xx_nvram.h>
  #include <linux/phy.h>
  #include <linux/phy_fixed.h>
-@@ -1409,6 +1410,17 @@ static const struct ethtool_ops bgmac_et
+@@ -1410,6 +1411,17 @@ static const struct ethtool_ops bgmac_et
  	.set_link_ksettings     = phy_ethtool_set_link_ksettings,
  };
  
@@ -50,7 +50,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  /**************************************************
   * MII
   **************************************************/
-@@ -1538,6 +1550,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
+@@ -1539,6 +1551,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
  	net_dev->hw_features = net_dev->features;
  	net_dev->vlan_features = net_dev->features;
  
@@ -65,7 +65,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  	err = register_netdev(bgmac->net_dev);
  	if (err) {
  		dev_err(bgmac->dev, "Cannot register net device\n");
-@@ -1560,6 +1580,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
+@@ -1561,6 +1581,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
  
  void bgmac_enet_remove(struct bgmac *bgmac)
  {

target/linux/generic/hack-4.14/901-debloat_sock_diag.patch

@@ -66,7 +66,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  static void __sk_free(struct sock *sk)
  {
 +#ifdef CONFIG_SOCK_DIAG
- 	if (unlikely(sock_diag_has_destroy_listeners(sk) && sk->sk_net_refcnt))
+ 	if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
  		sock_diag_broadcast_destroy(sk);
  	else
 +#endif

target/linux/generic/hack-4.14/902-debloat_proc.patch

@@ -243,7 +243,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  }
 --- a/mm/vmstat.c
 +++ b/mm/vmstat.c
-@@ -1944,10 +1944,12 @@ void __init init_mm_internals(void)
+@@ -1946,10 +1946,12 @@ void __init init_mm_internals(void)
  	start_shepherd_timer();
  #endif
  #ifdef CONFIG_PROC_FS

target/linux/generic/pending-4.14/101-clocksource-mips-gic-timer-fix-clocksource-counter-w.patch

@@ -1,23 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 21 Feb 2018 13:40:12 +0100
-Subject: [PATCH] clocksource: mips-gic-timer: fix clocksource counter width
-
-This code needs to use ffs instead of fls on the mask to determine the
-shift for reading the GIC_CONFIG_COUNTBITS field.
-
-Fixes: e07127a077c7 ("clocksource: mips-gic-timer: Use new GIC accessor functions")
-Cc: Paul Burton <paul.burton@imgtec.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/clocksource/mips-gic-timer.c
-+++ b/drivers/clocksource/mips-gic-timer.c
-@@ -164,7 +164,7 @@ static int __init __gic_clocksource_init
- 
- 	/* Set clocksource mask. */
- 	count_width = read_gic_config() & GIC_CONFIG_COUNTBITS;
--	count_width >>= __fls(GIC_CONFIG_COUNTBITS);
-+	count_width >>= __ffs(GIC_CONFIG_COUNTBITS);
- 	count_width *= 4;
- 	count_width += 32;
- 	gic_clocksource.mask = CLOCKSOURCE_MASK(count_width);

target/linux/generic/pending-4.14/103-MIPS-c-r4k-fix-data-corruption-related-to-cache-coherence.patch

@@ -1,90 +0,0 @@
-From patchwork Thu Apr 26 23:28:34 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v2] MIPS: c-r4k: fix data corruption related to cache coherence.
-X-Patchwork-Submitter: NeilBrown <neil@brown.name>
-X-Patchwork-Id: 19259
-Message-Id: <87vacdlf8d.fsf@notabene.neil.brown.name>
-To: James Hogan <jhogan@kernel.org>
-Cc: Ralf Baechle <ralf@linux-mips.org>,
- Paul Burton <paul.burton@mips.com>, linux-mips@linux-mips.org,
- linux-kernel@vger.kernel.org
-Date: Fri, 27 Apr 2018 09:28:34 +1000
-From: NeilBrown <neil@brown.name>
-List-Id: linux-mips <linux-mips.eddie.linux-mips.org>
-
-When DMA will be performed to a MIPS32 1004K CPS, the
-L1-cache for the range needs to be flushed and invalidated
-first.
-The code currently takes one of two approaches.
-1/ If the range is less than the size of the dcache, then
-   HIT type requests flush/invalidate cache lines for the
-   particular addresses.  HIT-type requests a globalised
-   by the CPS so this is safe on SMP.
-
-2/ If the range is larger than the size of dcache, then
-   INDEX type requests flush/invalidate the whole cache.
-   INDEX type requests affect the local cache only. CPS
-   does not propagate them in any way.  So this invalidation
-   is not safe on SMP CPS systems.
-
-Data corruption due to '2' can quite easily be demonstrated by
-repeatedly "echo 3 > /proc/sys/vm/drop_caches" and then sha1sum
-a file that is several times the size of available memory.
-Dropping caches means that large contiguous extents (large than
-dcache) are more likely.
-
-This was not a problem before Linux-4.8 because option 2 was
-never used if CONFIG_MIPS_CPS was defined.  The commit
-which removed that apparently didn't appreciate the full
-consequence of the change.
-
-We could, in theory, globalize the INDEX based flush by sending an IPI
-to other cores.  These cache invalidation routines can be called with
-interrupts disabled and synchronous IPI require interrupts to be
-enabled.  Asynchronous IPI may not trigger writeback soon enough.
-So we cannot use IPI in practice.
-
-We can already test is IPI would be needed for an INDEX operation
-with r4k_op_needs_ipi(R4K_INDEX).  If this is True then we mustn't try
-the INDEX approach as we cannot use IPI.  If this is False (e.g. when
-there is only one core and hence one L1 cache) then it is safe to
-use the INDEX approach without IPI.
-
-This patch avoids options 2 if r4k_op_needs_ipi(R4K_INDEX), and so
-eliminates the corruption.
-
-Fixes: c00ab4896ed5 ("MIPS: Remove cpu_has_safe_index_cacheops")
-Cc: stable@vger.kernel.org # v4.8+
-Signed-off-by: NeilBrown <neil@brown.name>
----
- arch/mips/mm/c-r4k.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -851,9 +851,12 @@ static void r4k_dma_cache_wback_inv(unsi
- 	/*
- 	 * Either no secondary cache or the available caches don't have the
- 	 * subset property so we have to flush the primary caches
--	 * explicitly
-+	 * explicitly.
-+	 * If we would need IPI to perform an INDEX-type operation, then
-+	 * we have to use the HIT-type alternative as IPI cannot be used
-+	 * here due to interrupts possibly being disabled.
- 	 */
--	if (size >= dcache_size) {
-+	if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
- 		r4k_blast_dcache();
- 	} else {
- 		R4600_HIT_CACHEOP_WAR_IMPL;
-@@ -890,7 +893,7 @@ static void r4k_dma_cache_inv(unsigned l
- 		return;
- 	}
- 
--	if (size >= dcache_size) {
-+	if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
- 		r4k_blast_dcache();
- 	} else {
- 		R4600_HIT_CACHEOP_WAR_IMPL;

target/linux/generic/pending-4.14/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch

@@ -8,7 +8,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/fs/jffs2/dir.c
 +++ b/fs/jffs2/dir.c
-@@ -756,6 +756,24 @@ static int jffs2_mknod (struct inode *di
+@@ -752,6 +752,24 @@ static int jffs2_mknod (struct inode *di
  	return ret;
  }
  
@@ -33,7 +33,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
  			 struct inode *new_dir_i, struct dentry *new_dentry,
  			 unsigned int flags)
-@@ -766,7 +784,7 @@ static int jffs2_rename (struct inode *o
+@@ -762,7 +780,7 @@ static int jffs2_rename (struct inode *o
  	uint8_t type;
  	uint32_t now;
  
@@ -42,7 +42,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		return -EINVAL;
  
  	/* The VFS will check for us and prevent trying to rename a
-@@ -832,9 +850,14 @@ static int jffs2_rename (struct inode *o
+@@ -828,9 +846,14 @@ static int jffs2_rename (struct inode *o
  	if (d_is_dir(old_dentry) && !victim_f)
  		inc_nlink(new_dir_i);
  

target/linux/generic/pending-4.14/141-jffs2-add-RENAME_EXCHANGE-support.patch

@@ -6,7 +6,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/fs/jffs2/dir.c
 +++ b/fs/jffs2/dir.c
-@@ -781,18 +781,31 @@ static int jffs2_rename (struct inode *o
+@@ -777,18 +777,31 @@ static int jffs2_rename (struct inode *o
  	int ret;
  	struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
  	struct jffs2_inode_info *victim_f = NULL;
@@ -40,7 +40,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
  		if (d_is_dir(new_dentry)) {
  			struct jffs2_full_dirent *fd;
-@@ -827,7 +840,7 @@ static int jffs2_rename (struct inode *o
+@@ -823,7 +836,7 @@ static int jffs2_rename (struct inode *o
  	if (ret)
  		return ret;
  
@@ -49,7 +49,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		/* There was a victim. Kill it off nicely */
  		if (d_is_dir(new_dentry))
  			clear_nlink(d_inode(new_dentry));
-@@ -853,6 +866,12 @@ static int jffs2_rename (struct inode *o
+@@ -849,6 +862,12 @@ static int jffs2_rename (struct inode *o
  	if (flags & RENAME_WHITEOUT)
  		/* Replace with whiteout */
  		ret = jffs2_whiteout(old_dir_i, old_dentry);
@@ -62,7 +62,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	else
  		/* Unlink the original */
  		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-@@ -884,7 +903,7 @@ static int jffs2_rename (struct inode *o
+@@ -880,7 +899,7 @@ static int jffs2_rename (struct inode *o
  		return ret;
  	}
  

target/linux/generic/pending-4.14/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch

@@ -1,61 +0,0 @@
-From d4c4bc11353f3bea6754f7d21e3612c9f32d1d64 Mon Sep 17 00:00:00 2001
-From: Giuseppe Lippolis <giu.lippolis@gmail.com>
-Date: Mon, 26 Mar 2018 16:34:39 +0200
-Subject: [PATCH] net-usb: add qmi_wwan if on lte modem wistron neweb d18q1
-
-This modem is embedded on dlink dwr-921 router.
-    The oem configuration states:
-
-    T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
-    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
-    P:  Vendor=1435 ProdID=0918 Rev= 2.32
-    S:  Manufacturer=Android
-    S:  Product=Android
-    S:  SerialNumber=0123456789ABCDEF
-    C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
-    I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
-    E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
-    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
-    E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
-    E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
-    E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
-    E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
-    E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
-    E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
-    E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
-    E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
-    E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-    E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
-
-Tested on openwrt distribution
-
-Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/qmi_wwan.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/usb/qmi_wwan.c
-+++ b/drivers/net/usb/qmi_wwan.c
-@@ -1105,6 +1105,9 @@ static const struct usb_device_id produc
- 	{QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
- 	{QMI_FIXED_INTF(0x12d1, 0x140c, 1)},	/* Huawei E173 */
- 	{QMI_FIXED_INTF(0x12d1, 0x14ac, 1)},	/* Huawei E1820 */
-+	{QMI_FIXED_INTF(0x1435, 0xd181, 3)},	/* Wistron NeWeb D18Q1 */
-+	{QMI_FIXED_INTF(0x1435, 0xd181, 4)},	/* Wistron NeWeb D18Q1 */
-+	{QMI_FIXED_INTF(0x1435, 0xd181, 5)},	/* Wistron NeWeb D18Q1 */
- 	{QMI_FIXED_INTF(0x16d8, 0x6003, 0)},	/* CMOTech 6003 */
- 	{QMI_FIXED_INTF(0x16d8, 0x6007, 0)},	/* CMOTech CHE-628S */
- 	{QMI_FIXED_INTF(0x16d8, 0x6008, 0)},	/* CMOTech CMU-301 */

target/linux/generic/pending-4.14/182-net-qmi_wwan-add-BroadMobi-BM806U-2020-2033.patch

@@ -1,28 +0,0 @@
-From 743989254ea9f132517806d8893ca9b6cf9dc86b Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sat, 24 Mar 2018 22:08:14 +0100
-Subject: [PATCH] net: qmi_wwan: add BroadMobi BM806U 2020:2033
-
-BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
-Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
-The USB id is added to qmi_wwan.c to allow QMI communication with
-the BM806U.
-
-Tested on 4.14 kernel and OpenWRT.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/qmi_wwan.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/usb/qmi_wwan.c
-+++ b/drivers/net/usb/qmi_wwan.c
-@@ -1184,6 +1184,7 @@ static const struct usb_device_id produc
- 	{QMI_FIXED_INTF(0x19d2, 0x2002, 4)},	/* ZTE (Vodafone) K3765-Z */
- 	{QMI_FIXED_INTF(0x2001, 0x7e19, 4)},	/* D-Link DWM-221 B1 */
- 	{QMI_FIXED_INTF(0x2001, 0x7e35, 4)},	/* D-Link DWM-222 */
-+	{QMI_FIXED_INTF(0x2020, 0x2033, 4)},	/* BroadMobi BM806U */
- 	{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)},    /* Sierra Wireless MC7700 */
- 	{QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */
- 	{QMI_FIXED_INTF(0x1199, 0x68a2, 8)},	/* Sierra Wireless MC7710 in QMI mode */

target/linux/generic/pending-4.14/201-extra_optimization.patch

@@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/Makefile
 +++ b/Makefile
-@@ -650,12 +650,12 @@ KBUILD_CFLAGS	+= $(call cc-disable-warni
+@@ -645,12 +645,12 @@ KBUILD_CFLAGS	+= $(call cc-disable-warni
  
  ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
  KBUILD_CFLAGS	+= $(call cc-option,-Oz,-Os)

target/linux/generic/pending-4.14/630-packet_socket_type.patch

@@ -87,7 +87,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (!net_eq(dev_net(dev), sock_net(sk)))
  		goto drop;
  
-@@ -3260,6 +3262,7 @@ static int packet_create(struct net *net
+@@ -3262,6 +3264,7 @@ static int packet_create(struct net *net
  	mutex_init(&po->pg_vec_lock);
  	po->rollover = NULL;
  	po->prot_hook.func = packet_rcv;
@@ -95,7 +95,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  	if (sock->type == SOCK_PACKET)
  		po->prot_hook.func = packet_rcv_spkt;
-@@ -3873,6 +3876,16 @@ packet_setsockopt(struct socket *sock, i
+@@ -3875,6 +3878,16 @@ packet_setsockopt(struct socket *sock, i
  		po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
  		return 0;
  	}
@@ -112,7 +112,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	default:
  		return -ENOPROTOOPT;
  	}
-@@ -3925,6 +3938,13 @@ static int packet_getsockopt(struct sock
+@@ -3927,6 +3940,13 @@ static int packet_getsockopt(struct sock
  	case PACKET_VNET_HDR:
  		val = po->has_vnet_hdr;
  		break;

target/linux/generic/pending-4.14/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch

@@ -413,7 +413,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  }
  
  static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
-@@ -2060,6 +2271,12 @@ static void ip6_tnl_dellink(struct net_d
+@@ -2064,6 +2275,12 @@ static void ip6_tnl_dellink(struct net_d
  
  static size_t ip6_tnl_get_size(const struct net_device *dev)
  {
@@ -426,7 +426,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  	return
  		/* IFLA_IPTUN_LINK */
  		nla_total_size(4) +
-@@ -2089,6 +2306,24 @@ static size_t ip6_tnl_get_size(const str
+@@ -2093,6 +2310,24 @@ static size_t ip6_tnl_get_size(const str
  		nla_total_size(0) +
  		/* IFLA_IPTUN_FWMARK */
  		nla_total_size(4) +
@@ -451,7 +451,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  		0;
  }
  
-@@ -2096,6 +2331,9 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -2100,6 +2335,9 @@ static int ip6_tnl_fill_info(struct sk_b
  {
  	struct ip6_tnl *tunnel = netdev_priv(dev);
  	struct __ip6_tnl_parm *parm = &tunnel->parms;
@@ -461,7 +461,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  
  	if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
  	    nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2105,9 +2343,27 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -2109,9 +2347,27 @@ static int ip6_tnl_fill_info(struct sk_b
  	    nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
  	    nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
  	    nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
@@ -490,7 +490,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  	if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
  	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
  	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2147,6 +2403,7 @@ static const struct nla_policy ip6_tnl_p
+@@ -2151,6 +2407,7 @@ static const struct nla_policy ip6_tnl_p
  	[IFLA_IPTUN_ENCAP_DPORT]	= { .type = NLA_U16 },
  	[IFLA_IPTUN_COLLECT_METADATA]	= { .type = NLA_FLAG },
  	[IFLA_IPTUN_FWMARK]		= { .type = NLA_U32 },

target/linux/generic/pending-4.14/811-pci_disable_usb_common_quirks.patch

@@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/drivers/usb/host/pci-quirks.c
 +++ b/drivers/usb/host/pci-quirks.c
-@@ -107,6 +107,8 @@ struct amd_chipset_type {
+@@ -124,6 +124,8 @@ struct amd_chipset_type {
  	u8 rev;
  };
  
@@ -19,7 +19,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  static struct amd_chipset_info {
  	struct pci_dev	*nb_dev;
  	struct pci_dev	*smbus_dev;
-@@ -511,6 +513,10 @@ void usb_amd_dev_put(void)
+@@ -528,6 +530,10 @@ void usb_amd_dev_put(void)
  }
  EXPORT_SYMBOL_GPL(usb_amd_dev_put);
  
@@ -28,9 +28,9 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 +#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
 +
  /*
-  * Make sure the controller is completely inactive, unable to
+  * Check if port is disabled in BIOS on AMD Promontory host.
-  * generate interrupts or do DMA.
+  * BIOS Disabled ports may wake on connect/disconnect and need
-@@ -590,8 +596,17 @@ reset_needed:
+@@ -699,8 +705,17 @@ reset_needed:
  	uhci_reset_hc(pdev, base);
  	return 1;
  }
@@ -48,7 +48,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
  {
  	u16 cmd;
-@@ -1178,3 +1193,4 @@ bool usb_xhci_needs_pci_reset(struct pci
+@@ -1287,3 +1302,4 @@ bool usb_xhci_needs_pci_reset(struct pci
  	return false;
  }
  EXPORT_SYMBOL_GPL(usb_xhci_needs_pci_reset);
@@ -65,8 +65,8 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  int usb_amd_find_chipset_info(void);
  int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
  bool usb_amd_hang_symptom_quirk(void);
-@@ -19,12 +22,29 @@ void sb800_prefetch(struct device *dev,
+@@ -20,12 +23,29 @@ bool usb_xhci_needs_pci_reset(struct pci
- bool usb_xhci_needs_pci_reset(struct pci_dev *pdev);
+ bool usb_amd_pt_check_port(struct device *device, int port);
  #else
  struct pci_dev;
 +static inline int usb_amd_find_chipset_info(void)
@@ -92,9 +92,9 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 +{
 +	return false;
 +}
- #endif  /* CONFIG_USB_PCI */
+ static inline bool usb_amd_pt_check_port(struct device *device, int port)
- 
+ {
- #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
+ 	return false;
 --- a/include/linux/usb/hcd.h
 +++ b/include/linux/usb/hcd.h
 @@ -465,7 +465,14 @@ extern int usb_hcd_pci_probe(struct pci_

target/linux/generic/pending-4.14/834-ledtrig-libata.patch

@@ -65,7 +65,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  /**
   *	ata_build_rw_tf - Build ATA taskfile for given read/write request
   *	@tf: Target ATA taskfile
-@@ -5114,6 +5127,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+@@ -5120,6 +5133,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
  		if (tag < 0)
  			return NULL;
  	}
@@ -75,7 +75,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  
  	qc = __ata_qc_from_tag(ap, tag);
  	qc->tag = tag;
-@@ -6015,6 +6031,9 @@ struct ata_port *ata_port_alloc(struct a
+@@ -6021,6 +6037,9 @@ struct ata_port *ata_port_alloc(struct a
  	ap->stats.unhandled_irq = 1;
  	ap->stats.idle_irq = 1;
  #endif
@@ -85,7 +85,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  	ata_sff_port_init(ap);
  
  	return ap;
-@@ -6036,6 +6055,12 @@ static void ata_host_release(struct devi
+@@ -6042,6 +6061,12 @@ static void ata_host_release(struct devi
  
  		kfree(ap->pmp_link);
  		kfree(ap->slave_link);
@@ -98,7 +98,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  		kfree(ap);
  		host->ports[i] = NULL;
  	}
-@@ -6482,7 +6507,23 @@ int ata_host_register(struct ata_host *h
+@@ -6488,7 +6513,23 @@ int ata_host_register(struct ata_host *h
  		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
  		host->ports[i]->local_port_no = i + 1;
  	}

target/linux/ipq40xx/patches-4.14/040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch

@@ -114,7 +114,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  
  	struct list_head node;
  };
-@@ -539,7 +544,7 @@ static void bam_free_chan(struct dma_cha
+@@ -540,7 +545,7 @@ static void bam_free_chan(struct dma_cha
  
  	vchan_free_chan_resources(to_virt_chan(chan));
  
@@ -123,7 +123,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  		dev_err(bchan->bdev->dev, "Cannot free busy channel\n");
  		goto err;
  	}
-@@ -632,8 +637,6 @@ static struct dma_async_tx_descriptor *b
+@@ -633,8 +638,6 @@ static struct dma_async_tx_descriptor *b
  
  	if (flags & DMA_PREP_INTERRUPT)
  		async_desc->flags |= DESC_FLAG_EOT;
@@ -132,7 +132,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  
  	async_desc->num_desc = num_alloc;
  	async_desc->curr_desc = async_desc->desc;
-@@ -684,14 +687,16 @@ err_out:
+@@ -685,14 +688,16 @@ err_out:
  static int bam_dma_terminate_all(struct dma_chan *chan)
  {
  	struct bam_chan *bchan = to_bam_chan(chan);
@@ -152,7 +152,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  	}
  
  	vchan_get_all_descriptors(&bchan->vc, &head);
-@@ -763,9 +768,9 @@ static int bam_resume(struct dma_chan *c
+@@ -764,9 +769,9 @@ static int bam_resume(struct dma_chan *c
   */
  static u32 process_channel_irqs(struct bam_device *bdev)
  {
@@ -164,7 +164,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  
  	srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE));
  
-@@ -785,27 +790,40 @@ static u32 process_channel_irqs(struct b
+@@ -786,27 +791,40 @@ static u32 process_channel_irqs(struct b
  		writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR));
  
  		spin_lock_irqsave(&bchan->vc.lock, flags);
@@ -214,7 +214,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  		}
  
  		spin_unlock_irqrestore(&bchan->vc.lock, flags);
-@@ -867,6 +885,7 @@ static enum dma_status bam_tx_status(str
+@@ -868,6 +886,7 @@ static enum dma_status bam_tx_status(str
  		struct dma_tx_state *txstate)
  {
  	struct bam_chan *bchan = to_bam_chan(chan);
@@ -222,7 +222,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  	struct virt_dma_desc *vd;
  	int ret;
  	size_t residue = 0;
-@@ -882,11 +901,17 @@ static enum dma_status bam_tx_status(str
+@@ -883,11 +902,17 @@ static enum dma_status bam_tx_status(str
  
  	spin_lock_irqsave(&bchan->vc.lock, flags);
  	vd = vchan_find_desc(&bchan->vc, cookie);
@@ -244,7 +244,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  
  	spin_unlock_irqrestore(&bchan->vc.lock, flags);
  
-@@ -927,63 +952,86 @@ static void bam_start_dma(struct bam_cha
+@@ -928,63 +953,86 @@ static void bam_start_dma(struct bam_cha
  {
  	struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc);
  	struct bam_device *bdev = bchan->bdev;
@@ -367,7 +367,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  
  	/* ensure descriptor writes and dma start not reordered */
  	wmb();
-@@ -1012,7 +1060,7 @@ static void dma_tasklet(unsigned long da
+@@ -1013,7 +1061,7 @@ static void dma_tasklet(unsigned long da
  		bchan = &bdev->channels[i];
  		spin_lock_irqsave(&bchan->vc.lock, flags);
  
@@ -376,7 +376,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  			bam_start_dma(bchan);
  		spin_unlock_irqrestore(&bchan->vc.lock, flags);
  	}
-@@ -1033,7 +1081,7 @@ static void bam_issue_pending(struct dma
+@@ -1034,7 +1082,7 @@ static void bam_issue_pending(struct dma
  	spin_lock_irqsave(&bchan->vc.lock, flags);
  
  	/* if work pending and idle, start a transaction */
@@ -385,7 +385,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
  		bam_start_dma(bchan);
  
  	spin_unlock_irqrestore(&bchan->vc.lock, flags);
-@@ -1133,6 +1181,7 @@ static void bam_channel_init(struct bam_
+@@ -1138,6 +1186,7 @@ static void bam_channel_init(struct bam_
  
  	vchan_init(&bchan->vc, &bdev->common);
  	bchan->vc.desc_free = bam_dma_free_desc;

target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch

@@ -33,22 +33,22 @@ Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
  - clock-names: Must contain "core" for the core clock and "iface" for the
    interface clock.
 @@ -22,7 +21,7 @@ Example:
-			compatible = "qcom,adm";
+ 			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
+ 			reg = <0x18300000 0x100000>;
-			interrupts = <0 170 0>;
+ 			interrupts = <0 170 0>;
 -			#dma-cells = <2>;
 +			#dma-cells = <1>;
-
+ 
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ 			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
+ 			clock-names = "core", "iface";
 @@ -35,15 +34,12 @@ Example:
-			qcom,ee = <0>;
+ 			qcom,ee = <0>;
-		};
+ 		};
-
+ 
 -DMA clients must use the format descripted in the dma.txt file, using a three
 +DMA clients must use the format descripted in the dma.txt file, using a two
  cell specifier for each channel.
-
+ 
 -Each dmas request consists of 3 cells:
 +Each dmas request consists of two cells:
   1. phandle pointing to the DMA controller
@@ -56,16 +56,16 @@ Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
 - 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
 -    The CRCI is used for flow control.  It identifies the peripheral device that
 -    is the source/destination for the transferred data.
-
+ 
  Example:
-
+ 
 @@ -55,7 +51,7 @@ Example:
-
+ 
-		cs-gpios = <&qcom_pinmux 20 0>;
+ 		cs-gpios = <&qcom_pinmux 20 0>;
-
+ 
 -		dmas = <&adm_dma 6 9>,
 -			<&adm_dma 5 10>;
 +		dmas = <&adm_dma 6>,
 +			<&adm_dma 5>;
-		dma-names = "rx", "tx";
+ 		dma-names = "rx", "tx";
-	};
+ 	};

target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch

@@ -27,9 +27,9 @@ Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
 --- a/drivers/dma/qcom/Kconfig
 +++ b/drivers/dma/qcom/Kconfig
 @@ -27,3 +27,13 @@ config QCOM_HIDMA
-	  (user to kernel, kernel to kernel, etc.).  It only supports
+ 	  (user to kernel, kernel to kernel, etc.).  It only supports
-	  memcpy interface. The core is not intended for general
+ 	  memcpy interface. The core is not intended for general
-	  purpose slave DMA.
+ 	  purpose slave DMA.
 +
 +config QCOM_ADM
 +	tristate "Qualcomm ADM support"

target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch

@@ -13,28 +13,28 @@ Signed-off-by: John Crispin <john@phrozen.org>
 --- a/drivers/clk/qcom/gcc-ipq806x.c
 +++ b/drivers/clk/qcom/gcc-ipq806x.c
 @@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = {
-			.parent_names = gcc_pxo_pll8,
+ 			.parent_names = gcc_pxo_pll8,
-			.num_parents = 2,
+ 			.num_parents = 2,
-			.ops = &clk_rcg_ops,
+ 			.ops = &clk_rcg_ops,
 -			.flags = CLK_SET_PARENT_GATE,
 +			.flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
-		},
+ 		},
-	},
+ 	},
  };
 @@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk
-			},
+ 			},
-			.num_parents = 1,
+ 			.num_parents = 1,
-			.ops = &clk_branch_ops,
+ 			.ops = &clk_branch_ops,
 -			.flags = CLK_SET_RATE_PARENT,
 +			.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
-		},
+ 		},
-	},
+ 	},
  };
 @@ -890,6 +890,7 @@ static struct clk_branch gsbi1_h_clk = {
-		.hw.init = &(struct clk_init_data){
+ 		.hw.init = &(struct clk_init_data){
-			.name = "gsbi1_h_clk",
+ 			.name = "gsbi1_h_clk",
-			.ops = &clk_branch_ops,
+ 			.ops = &clk_branch_ops,
 +			.flags = CLK_IGNORE_UNUSED,
-		},
+ 		},
-	},
+ 	},
  };

target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch

@@ -19,9 +19,9 @@ Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
 @@ -194,6 +194,13 @@ config MTD_MYLOADER_PARTS
-	  You will still need the parsing functions to be called by the driver
+ 	  You will still need the parsing functions to be called by the driver
-	  for your particular device. It won't happen automatically.
+ 	  for your particular device. It won't happen automatically.
-
+ 
 +config MTD_QCOM_SMEM_PARTS
 +	tristate "QCOM SMEM partitioning support"
 +	depends on QCOM_SMEM
@@ -30,7 +30,7 @@ Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
 +	  such as IPQ806x.
 +
  comment "User Modules And Translation Layers"
-
+ 
  #
 --- /dev/null
 +++ b/drivers/mtd/qcom_smem_part.c
@@ -278,5 +278,5 @@ Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
  obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
 +obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
  obj-y				+= parsers/
-
+ 
  # 'Users' - code which presents functionality to userspace.

target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch

@@ -13,10 +13,10 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
 
 --- a/drivers/phy/qualcomm/Kconfig
 +++ b/drivers/phy/qualcomm/Kconfig
-@@ -56,3 +56,15 @@
+@@ -56,3 +56,15 @@ config PHY_QCOM_USB_HSIC
-	select GENERIC_PHY
+ 	select GENERIC_PHY
-	help
+ 	help
-	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
+ 	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
 +
 +config PHY_QCOM_DWC3
 +	tristate "QCOM DWC3 USB PHY support"
@@ -31,7 +31,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
 +
 --- a/drivers/phy/qualcomm/Makefile
 +++ b/drivers/phy/qualcomm/Makefile
-@@ -8,3 +8,4 @@
+@@ -8,3 +8,4 @@ obj-$(CONFIG_PHY_QCOM_UFS)		+= phy-qcom-
  obj-$(CONFIG_PHY_QCOM_UFS)		+= phy-qcom-ufs-qmp-20nm.o
  obj-$(CONFIG_PHY_QCOM_USB_HS) 		+= phy-qcom-usb-hs.o
  obj-$(CONFIG_PHY_QCOM_USB_HSIC) 	+= phy-qcom-usb-hsic.o

target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch

@@ -20,9 +20,10 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 --- a/arch/arm/mach-qcom/Kconfig
 +++ b/arch/arm/mach-qcom/Kconfig
 @@ -6,6 +6,7 @@ menuconfig ARCH_QCOM
-	select ARM_AMBA
+ 	select ARM_AMBA
-	select PINCTRL
+ 	select PINCTRL
-	select QCOM_SCM if SMP
+ 	select QCOM_SCM if SMP
 +	select PCI_DOMAINS if PCI
-	help
+ 	help
-	  Support for Qualcomm's devicetree based systems.
+ 	  Support for Qualcomm's devicetree based systems.
+ 

target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch

@@ -42,19 +42,19 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 --- a/arch/arm/common/Kconfig
 +++ b/arch/arm/common/Kconfig
 @@ -7,6 +7,9 @@ config DMABOUNCE
-	bool
+ 	bool
-	select ZONE_DMA
+ 	select ZONE_DMA
-
+ 
 +config KRAIT_L2_ACCESSORS
 +	bool
 +
  config SHARP_LOCOMO
-	bool
+ 	bool
-
+ 
 --- a/arch/arm/common/Makefile
 +++ b/arch/arm/common/Makefile
 @@ -7,6 +7,7 @@ obj-y				+= firmware.o
-
+ 
  obj-$(CONFIG_SA1111)		+= sa1111.o
  obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 +obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o

target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch

@@ -34,13 +34,13 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 @@ -26,35 +26,24 @@
   * parent - parent is adjustable through clk_set_parent
   */
-
+ 
 -static u8 clk_mux_get_parent(struct clk_hw *hw)
 +unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
 +				unsigned int *table, unsigned long flags)
  {
 -	struct clk_mux *mux = to_clk_mux(hw);
-	int num_parents = clk_hw_get_num_parents(hw);
+ 	int num_parents = clk_hw_get_num_parents(hw);
 -	u32 val;
 -
 -	/*
@@ -52,40 +52,40 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 -	 */
 -	val = clk_readl(mux->reg) >> mux->shift;
 -	val &= mux->mask;
-
+ 
 -	if (mux->table) {
 +	if (table) {
-		int i;
+ 		int i;
-
+ 
-		for (i = 0; i < num_parents; i++)
+ 		for (i = 0; i < num_parents; i++)
 -			if (mux->table[i] == val)
 +			if (table[i] == val)
-				return i;
+ 				return i;
-		return -EINVAL;
+ 		return -EINVAL;
-	}
+ 	}
-
+ 
 -	if (val && (mux->flags & CLK_MUX_INDEX_BIT))
 +	if (val && (flags & CLK_MUX_INDEX_BIT))
-		val = ffs(val) - 1;
+ 		val = ffs(val) - 1;
-
+ 
 -	if (val && (mux->flags & CLK_MUX_INDEX_ONE))
 +	if (val && (flags & CLK_MUX_INDEX_ONE))
-		val--;
+ 		val--;
-
+ 
-	if (val >= num_parents)
+ 	if (val >= num_parents)
 @@ -62,23 +51,53 @@ static u8 clk_mux_get_parent(struct clk_
-
+ 
-	return val;
+ 	return val;
  }
 +EXPORT_SYMBOL_GPL(clk_mux_get_parent);
-
+ 
 -static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 +static u8 _clk_mux_get_parent(struct clk_hw *hw)
  {
-	struct clk_mux *mux = to_clk_mux(hw);
+ 	struct clk_mux *mux = to_clk_mux(hw);
-	u32 val;
+ 	u32 val;
 -	unsigned long flags = 0;
-
+ 
 -	if (mux->table) {
 -		index = mux->table[index];
 +	/*
@@ -108,18 +108,18 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +
 +	if (table) {
 +		val = table[val];
-	} else {
+ 	} else {
 -		if (mux->flags & CLK_MUX_INDEX_BIT)
 -			index = 1 << index;
 +		if (flags & CLK_MUX_INDEX_BIT)
 +			val = 1 << index;
-
+ 
 -		if (mux->flags & CLK_MUX_INDEX_ONE)
 -			index++;
 +		if (flags & CLK_MUX_INDEX_ONE)
 +			val++;
-	}
+ 	}
-
+ 
 +	return val;
 +}
 +EXPORT_SYMBOL_GPL(clk_mux_reindex);
@@ -132,64 +132,64 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +
 +	index = clk_mux_reindex(index, mux->table, mux->flags);
 +
-	if (mux->lock)
+ 	if (mux->lock)
-		spin_lock_irqsave(mux->lock, flags);
+ 		spin_lock_irqsave(mux->lock, flags);
-	else
+ 	else
 @@ -102,14 +121,14 @@ static int clk_mux_set_parent(struct clk
  }
-
+ 
  const struct clk_ops clk_mux_ops = {
 -	.get_parent = clk_mux_get_parent,
 +	.get_parent = _clk_mux_get_parent,
-	.set_parent = clk_mux_set_parent,
+ 	.set_parent = clk_mux_set_parent,
-	.determine_rate = __clk_mux_determine_rate,
+ 	.determine_rate = __clk_mux_determine_rate,
  };
  EXPORT_SYMBOL_GPL(clk_mux_ops);
-
+ 
  const struct clk_ops clk_mux_ro_ops = {
 -	.get_parent = clk_mux_get_parent,
 +	.get_parent = _clk_mux_get_parent,
  };
  EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
-
+ 
 @@ -117,7 +136,7 @@ struct clk_hw *clk_hw_register_mux_table
-		const char * const *parent_names, u8 num_parents,
+ 		const char * const *parent_names, u8 num_parents,
-		unsigned long flags,
+ 		unsigned long flags,
-		void __iomem *reg, u8 shift, u32 mask,
+ 		void __iomem *reg, u8 shift, u32 mask,
 -		u8 clk_mux_flags, u32 *table, spinlock_t *lock)
 +		u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
  {
-	struct clk_mux *mux;
+ 	struct clk_mux *mux;
-	struct clk_hw *hw;
+ 	struct clk_hw *hw;
 --- a/include/linux/clk-provider.h
 +++ b/include/linux/clk-provider.h
 @@ -468,7 +468,7 @@ void clk_hw_unregister_divider(struct cl
  struct clk_mux {
-	struct clk_hw	hw;
+ 	struct clk_hw	hw;
-	void __iomem	*reg;
+ 	void __iomem	*reg;
 -	u32		*table;
 +	unsigned int	*table;
-	u32		mask;
+ 	u32		mask;
-	u8		shift;
+ 	u8		shift;
-	u8		flags;
+ 	u8		flags;
 @@ -486,6 +486,11 @@ struct clk_mux {
  extern const struct clk_ops clk_mux_ops;
  extern const struct clk_ops clk_mux_ro_ops;
-
+ 
 +unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
 +				unsigned int *table, unsigned long flags);
 +unsigned int clk_mux_reindex(u8 index, unsigned int *table,
 +			     unsigned long flags);
 +
  struct clk *clk_register_mux(struct device *dev, const char *name,
-		const char * const *parent_names, u8 num_parents,
+ 		const char * const *parent_names, u8 num_parents,
-		unsigned long flags,
+ 		unsigned long flags,
 @@ -506,7 +511,7 @@ struct clk_hw *clk_hw_register_mux_table
-		const char * const *parent_names, u8 num_parents,
+ 		const char * const *parent_names, u8 num_parents,
-		unsigned long flags,
+ 		unsigned long flags,
-		void __iomem *reg, u8 shift, u32 mask,
+ 		void __iomem *reg, u8 shift, u32 mask,
 -		u8 clk_mux_flags, u32 *table, spinlock_t *lock);
 +		u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
-
+ 
  void clk_unregister_mux(struct clk *clk);
  void clk_hw_unregister_mux(struct clk_hw *hw);

target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch

@@ -36,7 +36,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +clk-qcom-y += clk-hfpll.o
  clk-qcom-y += reset.o
  clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
-
+ 
 --- /dev/null
 +++ b/drivers/clk/qcom/clk-hfpll.c
 @@ -0,0 +1,253 @@

target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch

@@ -77,9 +77,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 --- a/drivers/clk/qcom/Kconfig
 +++ b/drivers/clk/qcom/Kconfig
 @@ -196,3 +196,11 @@ config MSM_MMCC_8996
-	  Support for the multimedia clock controller on msm8996 devices.
+ 	  Support for the multimedia clock controller on msm8996 devices.
-	  Say Y if you want to support multimedia devices such as display,
+ 	  Say Y if you want to support multimedia devices such as display,
-	  graphics, video encode/decode, camera, etc.
+ 	  graphics, video encode/decode, camera, etc.
 +
 +config QCOM_HFPLL
 +	tristate "High-Frequency PLL (HFPLL) Clock Controller"

target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch

@@ -30,12 +30,12 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  #include "clk-branch.h"
 +#include "clk-hfpll.h"
  #include "reset.h"
-
+ 
  static struct clk_pll pll0 = {
 @@ -113,6 +114,84 @@ static struct clk_regmap pll8_vote = {
-	},
+ 	},
  };
-
+ 
 +static struct hfpll_data hfpll0_data = {
 +	.mode_reg = 0x3200,
 +	.l_reg = 0x3208,
@@ -115,15 +115,15 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +};
 +
  static struct clk_pll pll14 = {
-	.l_reg = 0x31c4,
+ 	.l_reg = 0x31c4,
-	.m_reg = 0x31c8,
+ 	.m_reg = 0x31c8,
 @@ -2801,6 +2880,9 @@ static struct clk_regmap *gcc_ipq806x_cl
-	[UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
+ 	[UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
-	[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
+ 	[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
-	[NSSTCM_CLK] = &nss_tcm_clk.clkr,
+ 	[NSSTCM_CLK] = &nss_tcm_clk.clkr,
 +	[PLL9] = &hfpll0.clkr,
 +	[PLL10] = &hfpll1.clkr,
 +	[PLL12] = &hfpll_l2.clkr,
  };
-
+ 
  static const struct qcom_reset_map gcc_ipq806x_resets[] = {

target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch

@@ -34,9 +34,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 --- a/drivers/clk/qcom/Kconfig
 +++ b/drivers/clk/qcom/Kconfig
 @@ -204,3 +204,7 @@ config QCOM_HFPLL
-	  Support for the high-frequency PLLs present on Qualcomm devices.
+ 	  Support for the high-frequency PLLs present on Qualcomm devices.
-	  Say Y if you want to support CPU frequency scaling on devices
+ 	  Say Y if you want to support CPU frequency scaling on devices
-	  such as MSM8974, APQ8084, etc.
+ 	  such as MSM8974, APQ8084, etc.
 +
 +config KRAIT_CLOCKS
 +	bool

target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch

@@ -35,9 +35,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 --- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
 +++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
 @@ -21,10 +21,17 @@ PROPERTIES
-		    the register region. An optional second element specifies
+ 		    the register region. An optional second element specifies
-		    the base address and size of the alias register region.
+ 		    the base address and size of the alias register region.
-
+ 
 +- clock-output-names:
 +	Usage: optional
 +	Value type: <string>
@@ -45,13 +45,13 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +		    CPU number starting at 0.
 +
  Example:
-
+ 
-	clock-controller@2088000 {
+ 	clock-controller@2088000 {
-		compatible = "qcom,kpss-acc-v2";
+ 		compatible = "qcom,kpss-acc-v2";
-		reg = <0x02088000 0x1000>,
+ 		reg = <0x02088000 0x1000>,
-		      <0x02008000 0x1000>;
+ 		      <0x02008000 0x1000>;
 +		clock-output-names = "acpu0_aux";
-	};
+ 	};
 --- /dev/null
 +++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
 @@ -0,0 +1,28 @@
@@ -86,9 +86,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 --- a/drivers/clk/qcom/Kconfig
 +++ b/drivers/clk/qcom/Kconfig
 @@ -205,6 +205,14 @@ config QCOM_HFPLL
-	  Say Y if you want to support CPU frequency scaling on devices
+ 	  Say Y if you want to support CPU frequency scaling on devices
-	  such as MSM8974, APQ8084, etc.
+ 	  such as MSM8974, APQ8084, etc.
-
+ 
 +config KPSS_XCC
 +	tristate "KPSS Clock Controller"
 +	depends on COMMON_CLK_QCOM
@@ -98,8 +98,8 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +	  as MSM8960, APQ8064, etc.
 +
  config KRAIT_CLOCKS
-	bool
+ 	bool
-	select KRAIT_L2_ACCESSORS
+ 	select KRAIT_L2_ACCESSORS
 --- a/drivers/clk/qcom/Makefile
 +++ b/drivers/clk/qcom/Makefile
 @@ -36,4 +36,5 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8

target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch

@@ -60,9 +60,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 --- a/drivers/clk/qcom/Kconfig
 +++ b/drivers/clk/qcom/Kconfig
 @@ -213,6 +213,14 @@ config KPSS_XCC
-	  if you want to support CPU frequency scaling on devices such
+ 	  if you want to support CPU frequency scaling on devices such
-	  as MSM8960, APQ8064, etc.
+ 	  as MSM8960, APQ8064, etc.
-
+ 
 +config KRAITCC
 +	tristate "Krait Clock Controller"
 +	depends on COMMON_CLK_QCOM && ARM
@@ -72,8 +72,8 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +	  Say Y if you want to support CPU frequency scaling.
 +
  config KRAIT_CLOCKS
-	bool
+ 	bool
-	select KRAIT_L2_ACCESSORS
+ 	select KRAIT_L2_ACCESSORS
 --- a/drivers/clk/qcom/Makefile
 +++ b/drivers/clk/qcom/Makefile
 @@ -38,3 +38,4 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o

target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch

@@ -31,32 +31,32 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
 --- a/drivers/clk/qcom/clk-krait.c
 +++ b/drivers/clk/qcom/clk-krait.c
 @@ -60,6 +60,8 @@ static int krait_mux_set_parent(struct c
-	if (__clk_is_enabled(hw->clk))
+ 	if (__clk_is_enabled(hw->clk))
-		__krait_mux_set_sel(mux, sel);
+ 		__krait_mux_set_sel(mux, sel);
-
+ 
 +	mux->reparent = true;
 +
-	return 0;
+ 	return 0;
  }
-
+ 
 --- a/drivers/clk/qcom/clk-krait.h
 +++ b/drivers/clk/qcom/clk-krait.h
 @@ -23,6 +23,9 @@ struct krait_mux_clk {
-	u32		shift;
+ 	u32		shift;
-	u32		en_mask;
+ 	u32		en_mask;
-	bool		lpl;
+ 	bool		lpl;
 +	u8		safe_sel;
 +	u8		old_index;
 +	bool		reparent;
-
+ 
-	struct clk_hw	hw;
+ 	struct clk_hw	hw;
-	struct notifier_block   clk_nb;
+ 	struct notifier_block   clk_nb;
 --- a/drivers/clk/qcom/krait-cc.c
 +++ b/drivers/clk/qcom/krait-cc.c
 @@ -35,6 +35,49 @@ static unsigned int pri_mux_map[] = {
-	0,
+ 	0,
  };
-
+ 
 +/*
 + * Notifier function for switching the muxes to safe parent
 + * while the hfpll is getting reprogrammed.
@@ -105,56 +105,56 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
  {
 @@ -79,6 +122,7 @@ static int
  krait_add_sec_mux(struct device *dev, int id, const char *s,
-		  unsigned int offset, bool unique_aux)
+ 		  unsigned int offset, bool unique_aux)
  {
 +	int ret;
-	struct krait_mux_clk *mux;
+ 	struct krait_mux_clk *mux;
-	static const char *sec_mux_list[] = {
+ 	static const char *sec_mux_list[] = {
-		"acpu_aux",
+ 		"acpu_aux",
 @@ -102,6 +146,7 @@ krait_add_sec_mux(struct device *dev, in
-	mux->shift = 2;
+ 	mux->shift = 2;
-	mux->parent_map = sec_mux_map;
+ 	mux->parent_map = sec_mux_map;
-	mux->hw.init = &init;
+ 	mux->hw.init = &init;
 +	mux->safe_sel = 0;
-
+ 
-	init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
+ 	init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
-	if (!init.name)
+ 	if (!init.name)
 @@ -117,6 +162,11 @@ krait_add_sec_mux(struct device *dev, in
-
+ 
-	clk = devm_clk_register(dev, &mux->hw);
+ 	clk = devm_clk_register(dev, &mux->hw);
-
+ 
 +	ret = krait_notifier_register(dev, clk, mux);
 +	if (ret)
 +		goto unique_aux;
 +
 +unique_aux:
-	if (unique_aux)
+ 	if (unique_aux)
-		kfree(sec_mux_list[0]);
+ 		kfree(sec_mux_list[0]);
  err_aux:
 @@ -128,6 +178,7 @@ static struct clk *
  krait_add_pri_mux(struct device *dev, int id, const char *s,
-		  unsigned int offset)
+ 		  unsigned int offset)
  {
 +	int ret;
-	struct krait_mux_clk *mux;
+ 	struct krait_mux_clk *mux;
-	const char *p_names[3];
+ 	const char *p_names[3];
-	struct clk_init_data init = {
+ 	struct clk_init_data init = {
 @@ -148,6 +199,7 @@ krait_add_pri_mux(struct device *dev, in
-	mux->lpl = id >= 0;
+ 	mux->lpl = id >= 0;
-	mux->parent_map = pri_mux_map;
+ 	mux->parent_map = pri_mux_map;
-	mux->hw.init = &init;
+ 	mux->hw.init = &init;
 +	mux->safe_sel = 2;
-
+ 
-	init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
+ 	init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
-	if (!init.name)
+ 	if (!init.name)
 @@ -173,6 +225,10 @@ krait_add_pri_mux(struct device *dev, in
-
+ 
-	clk = devm_clk_register(dev, &mux->hw);
+ 	clk = devm_clk_register(dev, &mux->hw);
-
+ 
 +	ret = krait_notifier_register(dev, clk, mux);
 +	if (ret)
 +		goto err_p3;
 +err_p3:
-	kfree(p_names[2]);
+ 	kfree(p_names[2]);
  err_p2:
-	kfree(p_names[1]);
+ 	kfree(p_names[1]);

target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch

@@ -73,9 +73,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 --- a/drivers/cpufreq/Kconfig.arm
 +++ b/drivers/cpufreq/Kconfig.arm
 @@ -100,6 +100,15 @@ config ARM_OMAP2PLUS_CPUFREQ
-	depends on ARCH_OMAP2PLUS
+ 	depends on ARCH_OMAP2PLUS
-	default ARCH_OMAP2PLUS
+ 	default ARCH_OMAP2PLUS
-
+ 
 +config ARM_QCOM_CPUFREQ
 +	tristate "Qualcomm based"
 +	depends on ARCH_QCOM
@@ -86,11 +86,11 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +	  If in doubt, say N.
 +
  config ARM_S3C_CPUFREQ
-	bool
+ 	bool
-	help
+ 	help
 --- a/drivers/cpufreq/Makefile
 +++ b/drivers/cpufreq/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MT8173_CPUFREQ)	+= mt81
+@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= me
  obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
  obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
  obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o

target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch

@@ -29,31 +29,31 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
 --- a/drivers/cpufreq/cpufreq-dt.c
 +++ b/drivers/cpufreq/cpufreq-dt.c
 @@ -220,7 +220,10 @@ static int cpufreq_init(struct cpufreq_p
-	}
+ 	}
-
+ 
-	if (fallback) {
+ 	if (fallback) {
 -		cpumask_setall(policy->cpus);
 +		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
 +
 +		if (!pd || !pd->independent_clocks)
 +			cpumask_setall(policy->cpus);
-
+ 
-		/*
+ 		/*
-		 * OPP tables are initialized only for policy->cpu, do it for
+ 		 * OPP tables are initialized only for policy->cpu, do it for
 @@ -372,6 +375,8 @@ static int dt_cpufreq_probe(struct platf
-	if (data && data->have_governor_per_policy)
+ 	if (data && data->have_governor_per_policy)
-		dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
+ 		dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
-
+ 
 +	dt_cpufreq_driver.driver_data = data;
 +
-	ret = cpufreq_register_driver(&dt_cpufreq_driver);
+ 	ret = cpufreq_register_driver(&dt_cpufreq_driver);
-	if (ret)
+ 	if (ret)
-		dev_err(&pdev->dev, "failed register driver: %d\n", ret);
+ 		dev_err(&pdev->dev, "failed register driver: %d\n", ret);
 --- a/drivers/cpufreq/cpufreq-dt.h
 +++ b/drivers/cpufreq/cpufreq-dt.h
 @@ -13,6 +13,12 @@
  #include <linux/types.h>
-
+ 
  struct cpufreq_dt_platform_data {
 +	/*
 +	 * True when each CPU has its own clock to control its
@@ -61,5 +61,6 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
 +	 * clock.
 +	 */
 +	bool independent_clocks;
-	bool have_governor_per_policy;
+ 	bool have_governor_per_policy;
  };
+ 

target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch

@@ -28,38 +28,38 @@ Signed-off-by: Archit Taneja <architt@codeaurora.org>
 --- a/drivers/mtd/nand/nand_base.c
 +++ b/drivers/mtd/nand/nand_base.c
 @@ -481,7 +481,11 @@ static int nand_default_block_markbad(st
-	} else {
+ 	} else {
-		ops.len = ops.ooblen = 1;
+ 		ops.len = ops.ooblen = 1;
-	}
+ 	}
 -	ops.mode = MTD_OPS_PLACE_OOB;
 +
 +	if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW))
 +		ops.mode = MTD_OPS_RAW;
 +	else
 +		ops.mode = MTD_OPS_PLACE_OOB;
-
+ 
-	/* Write to first/last page(s) if necessary */
+ 	/* Write to first/last page(s) if necessary */
-	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+ 	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
 --- a/drivers/mtd/nand/nand_bbt.c
 +++ b/drivers/mtd/nand/nand_bbt.c
 @@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_in
-	ops.oobbuf = buf;
+ 	ops.oobbuf = buf;
-	ops.ooboffs = 0;
+ 	ops.ooboffs = 0;
-	ops.datbuf = NULL;
+ 	ops.datbuf = NULL;
 -	ops.mode = MTD_OPS_PLACE_OOB;
 +
 +	if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW))
 +		ops.mode = MTD_OPS_RAW;
 +	else
 +		ops.mode = MTD_OPS_PLACE_OOB;
-
+ 
-	for (j = 0; j < numpages; j++) {
+ 	for (j = 0; j < numpages; j++) {
-		/*
+ 		/*
 --- a/include/linux/mtd/bbm.h
 +++ b/include/linux/mtd/bbm.h
 @@ -116,6 +116,12 @@ struct nand_bbt_descr {
  #define NAND_BBT_NO_OOB_BBM	0x00080000
-
+ 
  /*
 + * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To
 + * be used by controllers which can access BBM only when ECC is disabled, i.e,

target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch

@@ -10,17 +10,17 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 
 --- a/drivers/base/power/opp/core.c
 +++ b/drivers/base/power/opp/core.c
-@@ -1277,11 +1277,13 @@
+@@ -1277,11 +1277,13 @@ struct opp_table *dev_pm_opp_set_regulat
-	if (!opp_table)
+ 	if (!opp_table)
-		return ERR_PTR(-ENOMEM);
+ 		return ERR_PTR(-ENOMEM);
-
+ 
 +#if 0
-	/* This should be called before OPPs are initialized */
+ 	/* This should be called before OPPs are initialized */
-	if (WARN_ON(!list_empty(&opp_table->opp_list))) {
+ 	if (WARN_ON(!list_empty(&opp_table->opp_list))) {
-		ret = -EBUSY;
+ 		ret = -EBUSY;
-		goto err;
+ 		goto err;
-	}
+ 	}
 +#endif
-
+ 
-	/* Already have regulators set */
+ 	/* Already have regulators set */
-	if (opp_table->regulators) {
+ 	if (opp_table->regulators) {

target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch

@@ -27,9 +27,9 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 
 --- a/drivers/base/power/opp/core.c
 +++ b/drivers/base/power/opp/core.c
-@@ -1605,6 +1605,83 @@ unlock:
+@@ -1605,6 +1605,83 @@ put_table:
  }
-
+ 
  /**
 + * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP
 + * @dev:		device for which we do this operation
@@ -114,27 +114,27 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 --- a/include/linux/pm_opp.h
 +++ b/include/linux/pm_opp.h
 @@ -25,6 +25,7 @@ struct opp_table;
-
+ 
  enum dev_pm_opp_event {
-	OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
+ 	OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
 +	OPP_EVENT_ADJUST_VOLTAGE,
  };
-
+ 
  /**
 @@ -108,6 +109,9 @@ int dev_pm_opp_add(struct device *dev, u
-		   unsigned long u_volt);
+ 		   unsigned long u_volt);
  void dev_pm_opp_remove(struct device *dev, unsigned long freq);
-
+ 
 +int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
 +			      unsigned long u_volt);
 +
  int dev_pm_opp_enable(struct device *dev, unsigned long freq);
-
+ 
  int dev_pm_opp_disable(struct device *dev, unsigned long freq);
 @@ -208,6 +212,13 @@ static inline void dev_pm_opp_remove(str
  {
  }
-
+ 
 +static inline int
 +dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
 +			  unsigned long u_volt)
@@ -144,4 +144,4 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 +
  static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq)
  {
-	return 0;
+ 	return 0;

target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch

@@ -15,7 +15,7 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 @@ -126,6 +126,27 @@ unsigned long dev_pm_opp_get_freq(struct
  }
  EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);
-
+ 
 +struct regulator *dev_pm_opp_get_regulator(struct device *dev)
 +{
 +	struct opp_table *opp_table;
@@ -42,10 +42,11 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
   * @opp: opp for which turbo mode is being verified
 --- a/include/linux/pm_opp.h
 +++ b/include/linux/pm_opp.h
-@@ -85,6 +85,7 @@ enum dev_pm_opp_event {
+@@ -85,6 +85,7 @@ void dev_pm_opp_put_opp_table(struct opp
  unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp);
-
+ 
  unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp);
 +struct regulator *dev_pm_opp_get_regulator(struct device *dev);
-
+ 
  bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);
+ 

target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch

@@ -18,21 +18,21 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 --- a/drivers/base/power/opp/core.c
 +++ b/drivers/base/power/opp/core.c
 @@ -1649,6 +1649,7 @@ int dev_pm_opp_adjust_voltage(struct dev
-	struct opp_table *opp_table;
+ 	struct opp_table *opp_table;
-	struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
+ 	struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
-	int r = 0;
+ 	int r = 0;
 +	unsigned long tol;
-
+ 
-	/* keep the node allocated */
+ 	/* keep the node allocated */
-	new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
+ 	new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
 @@ -1685,6 +1686,10 @@ int dev_pm_opp_adjust_voltage(struct dev
-
+ 
-	/* plug in new node */
+ 	/* plug in new node */
-	new_opp->supplies[0].u_volt = u_volt;
+ 	new_opp->supplies[0].u_volt = u_volt;
 +	tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
 +	new_opp->supplies[0].u_volt = u_volt;
 +	new_opp->supplies[0].u_volt_min = u_volt - tol;
 +	new_opp->supplies[0].u_volt_max = u_volt + tol;
-
+ 
-	list_replace(&opp->node, &new_opp->node);
+ 	list_replace(&opp->node, &new_opp->node);
-	mutex_unlock(&opp_table_lock);
+ 	mutex_unlock(&opp_table_lock);

target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch

@@ -12,29 +12,29 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
 +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
 @@ -61,6 +61,7 @@ Regulator nodes are identified by their
-		    "qcom,rpm-pm8901-regulators"
+ 		    "qcom,rpm-pm8901-regulators"
-		    "qcom,rpm-pm8921-regulators"
+ 		    "qcom,rpm-pm8921-regulators"
-		    "qcom,rpm-pm8018-regulators"
+ 		    "qcom,rpm-pm8018-regulators"
 +		    "qcom,rpm-smb208-regulators"
-
+ 
  - vdd_l0_l1_lvs-supply:
  - vdd_l2_l11_l12-supply:
 @@ -171,6 +172,9 @@ pm8018:
-	s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+ 	s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
-	l12, l14, lvs1
+ 	l12, l14, lvs1
-
+ 
 +smb208:
 +	s1a, s1b, s2a, s2b
 +
  The content of each sub-node is defined by the standard binding for regulators -
  see regulator.txt - with additional custom properties described below:
-
+ 
 --- a/drivers/regulator/qcom_rpm-regulator.c
 +++ b/drivers/regulator/qcom_rpm-regulator.c
 @@ -933,12 +933,21 @@ static const struct rpm_regulator_data r
-	{ }
+ 	{ }
  };
-
+ 
 +static const struct rpm_regulator_data rpm_smb208_regulators[] = {
 +	{ "s1a",  QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
 +	{ "s1b",  QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
@@ -44,12 +44,12 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
 +};
 +
  static const struct of_device_id rpm_of_match[] = {
-	{ .compatible = "qcom,rpm-pm8018-regulators",
+ 	{ .compatible = "qcom,rpm-pm8018-regulators",
-		.data = &rpm_pm8018_regulators },
+ 		.data = &rpm_pm8018_regulators },
-	{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
+ 	{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
-	{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
+ 	{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
-	{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
+ 	{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
 +	{ .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
-	{ }
+ 	{ }
  };
  MODULE_DEVICE_TABLE(of, rpm_of_match);

target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch

@@ -26,19 +26,19 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 --- a/drivers/cpufreq/cpufreq-dt.c
 +++ b/drivers/cpufreq/cpufreq-dt.c
 @@ -32,6 +32,9 @@ struct private_data {
-	struct device *cpu_dev;
+ 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
+ 	struct thermal_cooling_device *cdev;
-	const char *reg_name;
+ 	const char *reg_name;
 +	struct notifier_block opp_nb;
 +	struct mutex lock;
 +	unsigned long opp_freq;
  };
-
+ 
  static struct freq_attr *cpufreq_dt_attr[] = {
 @@ -43,9 +46,16 @@ static struct freq_attr *cpufreq_dt_attr
  static int set_target(struct cpufreq_policy *policy, unsigned int index)
  {
-	struct private_data *priv = policy->driver_data;
+ 	struct private_data *priv = policy->driver_data;
 +	int ret;
 +	unsigned long target_freq = policy->freq_table[index].frequency * 1000;
 +
@@ -47,17 +47,17 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 +	if (!ret)
 +		priv->opp_freq = target_freq;
 +	mutex_unlock(&priv->lock);
-
+ 
 -	return dev_pm_opp_set_rate(priv->cpu_dev,
 -				   policy->freq_table[index].frequency * 1000);
 +	return ret;
  }
-
+ 
  /*
 @@ -86,6 +96,39 @@ node_put:
-	return name;
+ 	return name;
  }
-
+ 
 +static int opp_notifier(struct notifier_block *nb, unsigned long event,
 +			void *data)
 +{
@@ -93,39 +93,39 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 +
  static int resources_available(void)
  {
-	struct device *cpu_dev;
+ 	struct device *cpu_dev;
 @@ -152,6 +195,7 @@ static int cpufreq_init(struct cpufreq_p
-	bool fallback = false;
+ 	bool fallback = false;
-	const char *name;
+ 	const char *name;
-	int ret;
+ 	int ret;
 +	struct srcu_notifier_head *opp_srcu_head;
-
+ 
-	cpu_dev = get_cpu_device(policy->cpu);
+ 	cpu_dev = get_cpu_device(policy->cpu);
-	if (!cpu_dev) {
+ 	if (!cpu_dev) {
 @@ -241,13 +285,16 @@ static int cpufreq_init(struct cpufreq_p
-		goto out_free_opp;
+ 		goto out_free_opp;
-	}
+ 	}
-
+ 
 +	mutex_init(&priv->lock);
 +	dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb);
 +
-	priv->reg_name = name;
+ 	priv->reg_name = name;
-	priv->opp_table = opp_table;
+ 	priv->opp_table = opp_table;
-
+ 
-	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
-	if (ret) {
+ 	if (ret) {
-		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
+ 		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
 -		goto out_free_priv;
 +		goto out_unregister_nb;
-	}
+ 	}
-
+ 
-	priv->cpu_dev = cpu_dev;
+ 	priv->cpu_dev = cpu_dev;
-@@ -283,6 +343,8 @@ static int cpufreq_init(struct cpufreq_p
+@@ -283,6 +330,8 @@ static int cpufreq_init(struct cpufreq_p
-
+ 
  out_free_cpufreq_table:
-	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+ 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 +out_unregister_nb:
 +	dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb);
  out_free_priv:
-	kfree(priv);
+ 	kfree(priv);
  out_free_opp:

target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch

@@ -12,15 +12,15 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 --- a/drivers/cpufreq/cpufreq-dt.c
 +++ b/drivers/cpufreq/cpufreq-dt.c
 @@ -48,11 +48,41 @@ static int set_target(struct cpufreq_pol
-	struct private_data *priv = policy->driver_data;
+ 	struct private_data *priv = policy->driver_data;
-	int ret;
+ 	int ret;
-	unsigned long target_freq = policy->freq_table[index].frequency * 1000;
+ 	unsigned long target_freq = policy->freq_table[index].frequency * 1000;
 +	struct clk *l2_clk = policy->l2_clk;
 +	unsigned int l2_freq;
 +	unsigned long new_l2_freq = 0;
-
+ 
-	mutex_lock(&priv->lock);
+ 	mutex_lock(&priv->lock);
-	ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
+ 	ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
 -	if (!ret)
 +
 +	if (!ret) {
@@ -48,25 +48,25 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 +			}
 +		}
 +
-		priv->opp_freq = target_freq;
+ 		priv->opp_freq = target_freq;
 +	}
 +
-	mutex_unlock(&priv->lock);
+ 	mutex_unlock(&priv->lock);
-
+ 
-	return ret;
+ 	return ret;
 @@ -196,6 +226,8 @@ static int cpufreq_init(struct cpufreq_p
-	const char *name;
+ 	const char *name;
-	int ret;
+ 	int ret;
-	struct srcu_notifier_head *opp_srcu_head;
+ 	struct srcu_notifier_head *opp_srcu_head;
 +	struct device_node *l2_np;
 +	struct clk *l2_clk = NULL;
-
+ 
-	cpu_dev = get_cpu_device(policy->cpu);
+ 	cpu_dev = get_cpu_device(policy->cpu);
-	if (!cpu_dev) {
+ 	if (!cpu_dev) {
 @@ -303,6 +335,13 @@ static int cpufreq_init(struct cpufreq_p
-
+ 
-	policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
+ 	policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
-
+ 
 +	l2_clk = clk_get(cpu_dev, "l2");
 +	if (!IS_ERR(l2_clk))
 +		policy->l2_clk = l2_clk;
@@ -74,17 +74,17 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 +	if (l2_np)
 +		of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3);
 +
-	ret = cpufreq_table_validate_and_show(policy, freq_table);
+ 	ret = cpufreq_table_validate_and_show(policy, freq_table);
-	if (ret) {
+ 	if (ret) {
-		dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
+ 		dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
 --- a/include/linux/cpufreq.h
 +++ b/include/linux/cpufreq.h
 @@ -73,6 +73,8 @@ struct cpufreq_policy {
-	unsigned int		cpu;    /* cpu managing this policy, must be online */
+ 	unsigned int		cpu;    /* cpu managing this policy, must be online */
-
+ 
-	struct clk		*clk;
+ 	struct clk		*clk;
 +	struct clk		*l2_clk; /* L2 clock */
 +	unsigned int		l2_rate[3]; /* L2 bus clock rate thresholds */
-	struct cpufreq_cpuinfo	cpuinfo;/* see above */
+ 	struct cpufreq_cpuinfo	cpuinfo;/* see above */
-
+ 
-	unsigned int		min;    /* in kHz */
+ 	unsigned int		min;    /* in kHz */

target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch

@@ -11,13 +11,13 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 --- a/drivers/cpufreq/cpufreq-dt.c
 +++ b/drivers/cpufreq/cpufreq-dt.c
 @@ -143,8 +143,10 @@ static int opp_notifier(struct notifier_
-			ret = PTR_ERR(cpu_reg);
+ 			ret = PTR_ERR(cpu_reg);
-			goto out;
+ 			goto out;
-		}
+ 		}
 +		rcu_read_lock();
-		volt = dev_pm_opp_get_voltage(opp);
+ 		volt = dev_pm_opp_get_voltage(opp);
-		freq = dev_pm_opp_get_freq(opp);
+ 		freq = dev_pm_opp_get_freq(opp);
 +		rcu_read_unlock();
-
+ 
-		mutex_lock(&priv->lock);
+ 		mutex_lock(&priv->lock);
-		if (freq == priv->opp_freq) {
+ 		if (freq == priv->opp_freq) {

target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch

@@ -17,9 +17,9 @@ Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
 --- a/drivers/cpuidle/Kconfig.arm
 +++ b/drivers/cpuidle/Kconfig.arm
 @@ -75,3 +75,10 @@ config ARM_MVEBU_V7_CPUIDLE
-	depends on ARCH_MVEBU && !ARM64
+ 	depends on ARCH_MVEBU && !ARM64
-	help
+ 	help
-	  Select this to enable cpuidle on Armada 370, 38x and XP processors.
+ 	  Select this to enable cpuidle on Armada 370, 38x and XP processors.
 +
 +config ARM_QCOM_CPUIDLE
 +	bool "CPU Idle Driver for QCOM processors"

target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch

@@ -33,15 +33,15 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -341,7 +341,7 @@
+@@ -341,7 +341,7 @@ config ARCH_MULTIPLATFORM
-	depends on MMU
+ 	depends on MMU
-	select ARM_HAS_SG_CHAIN
+ 	select ARM_HAS_SG_CHAIN
-	select ARM_PATCH_PHYS_VIRT
+ 	select ARM_PATCH_PHYS_VIRT
 -	select AUTO_ZRELADDR
 +	select AUTO_ZRELADDR if !ARCH_QCOM
-	select TIMER_OF
+ 	select TIMER_OF
-	select COMMON_CLK
+ 	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
+ 	select GENERIC_CLOCKEVENTS
 --- a/arch/arm/Makefile
 +++ b/arch/arm/Makefile
 @@ -255,9 +255,11 @@ MACHINE  := arch/arm/mach-$(word 1,$(mac
@@ -53,7 +53,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
  MACHINE  :=
  endif
 +endif
-
+ 
  machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
  platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
 --- /dev/null

target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch

@@ -11,13 +11,13 @@ Signed-off-by: John Crispin <john@phrozen.org>
 --- a/drivers/mtd/qcom_smem_part.c
 +++ b/drivers/mtd/qcom_smem_part.c
 @@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st
-		m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
+ 		m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
-		m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
+ 		m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
-
+ 
 +		/* "rootfs" conflicts with OpenWrt auto mounting */
 +		if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs"))
 +			m_part->name = "ubi";
 +
-		/*
+ 		/*
-		 * The last SMEM partition may have its size marked as
+ 		 * The last SMEM partition may have its size marked as
-		 * something like 0xffffffff, which means "until the end of the
+ 		 * something like 0xffffffff, which means "until the end of the

target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch

@@ -15,11 +15,11 @@ Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
 --- a/drivers/clk/qcom/gcc-ipq806x.c
 +++ b/drivers/clk/qcom/gcc-ipq806x.c
 @@ -1233,6 +1233,8 @@ static struct clk_rcg prng_src = {
-		.parent_map = gcc_pxo_pll8_map,
+ 		.parent_map = gcc_pxo_pll8_map,
-	},
+ 	},
-	.clkr = {
+ 	.clkr = {
 +		.enable_reg = 0x2e80,
 +		.enable_mask = BIT(11),
-		.hw.init = &(struct clk_init_data){
+ 		.hw.init = &(struct clk_init_data){
-			.name = "prng_src",
+ 			.name = "prng_src",
-			.parent_names = gcc_pxo_pll8,
+ 			.parent_names = gcc_pxo_pll8,

target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch

@@ -39,7 +39,7 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
   - "qcom,msm8974-tsens" : For 8974 Family of SoCs
   - "qcom,msm8996-tsens" : For 8996 Family of SoCs
 + - "qcom,ipq8064-tsens" : For IPQ8064
-
+ 
  - reg: Address range of the thermal registers
  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
 --- a/drivers/thermal/qcom/Makefile
@@ -606,22 +606,22 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
 --- a/drivers/thermal/qcom/tsens.c
 +++ b/drivers/thermal/qcom/tsens.c
 @@ -72,6 +72,9 @@ static const struct of_device_id tsens_t
-	}, {
+ 	}, {
-		.compatible = "qcom,msm8996-tsens",
+ 		.compatible = "qcom,msm8996-tsens",
-		.data = &data_8996,
+ 		.data = &data_8996,
 +	}, {
 +		.compatible = "qcom,ipq8064-tsens",
 +		.data = &data_ipq8064,
-	},
+ 	},
-	{}
+ 	{}
  };
 --- a/drivers/thermal/qcom/tsens.h
 +++ b/drivers/thermal/qcom/tsens.h
 @@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsen
  int init_common(struct tsens_device *);
  int get_temp_common(struct tsens_device *, int, int *);
-
+ 
 -extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
 +extern const struct tsens_data data_8916, data_8974, data_8960, data_8996, data_ipq8064;
-
+ 
  #endif /* __QCOM_TSENS_H__ */

target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch

@@ -26,84 +26,84 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
 @@ -12,11 +12,15 @@ Required properties:
  - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
  nvmem cells
-
+ 
 +Optional properties:
 +- interrupts: Interrupt which gets triggered when threshold is hit
 +
  Example:
  tsens: thermal-sensor@900000 {
-		compatible = "qcom,msm8916-tsens";
+ 		compatible = "qcom,msm8916-tsens";
-		reg = <0x4a8000 0x2000>;
+ 		reg = <0x4a8000 0x2000>;
-		nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+ 		nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-		nvmem-cell-names = "caldata", "calsel";
+ 		nvmem-cell-names = "caldata", "calsel";
 +		interrupts = <0 178 0>;
-		#thermal-sensor-cells = <1>;
+ 		#thermal-sensor-cells = <1>;
-	};
+ 	};
 --- a/drivers/thermal/of-thermal.c
 +++ b/drivers/thermal/of-thermal.c
 @@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct th
  {
-	struct __thermal_zone *data = tz->devdata;
+ 	struct __thermal_zone *data = tz->devdata;
-
+ 
 -	if (!data->ops->get_temp)
 +	if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED))
-		return -EINVAL;
+ 		return -EINVAL;
-
+ 
-	return data->ops->get_temp(data->sensor_data, temp);
+ 	return data->ops->get_temp(data->sensor_data, temp);
 @@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct t
  {
-	struct __thermal_zone *data = tz->devdata;
+ 	struct __thermal_zone *data = tz->devdata;
-
+ 
 -	if (!data->ops || !data->ops->set_trips)
 +	if (!data->ops || !data->ops->set_trips
 +			|| (data->mode == THERMAL_DEVICE_DISABLED))
-		return -EINVAL;
+ 		return -EINVAL;
-
+ 
-	return data->ops->set_trips(data->sensor_data, low, high);
+ 	return data->ops->set_trips(data->sensor_data, low, high);
 @@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(stru
  {
-	struct __thermal_zone *data = tz->devdata;
+ 	struct __thermal_zone *data = tz->devdata;
-
+ 
 +	if (data->mode == THERMAL_DEVICE_DISABLED)
 +		return -EINVAL;
 +
-	return data->ops->set_emul_temp(data->sensor_data, temp);
+ 	return data->ops->set_emul_temp(data->sensor_data, temp);
  }
-
+ 
 @@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct t
  {
-	struct __thermal_zone *data = tz->devdata;
+ 	struct __thermal_zone *data = tz->devdata;
-
+ 
 -	if (!data->ops->get_trend)
 +	if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED))
-		return -EINVAL;
+ 		return -EINVAL;
-
+ 
-	return data->ops->get_trend(data->sensor_data, trip, trend);
+ 	return data->ops->get_trend(data->sensor_data, trip, trend);
 @@ -286,7 +290,9 @@ static int of_thermal_set_mode(struct th
-	mutex_unlock(&tz->lock);
+ 	mutex_unlock(&tz->lock);
-
+ 
-	data->mode = mode;
+ 	data->mode = mode;
 -	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
 +
 +	if (mode == THERMAL_DEVICE_ENABLED)
 +		thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
+ 
-	return 0;
+ 	return 0;
  }
 @@ -296,7 +302,8 @@ static int of_thermal_get_trip_type(stru
  {
-	struct __thermal_zone *data = tz->devdata;
+ 	struct __thermal_zone *data = tz->devdata;
-
+ 
 -	if (trip >= data->ntrips || trip < 0)
 +	if (trip >= data->ntrips || trip < 0
 +				|| (data->mode == THERMAL_DEVICE_DISABLED))
-		return -EDOM;
+ 		return -EDOM;
-
+ 
-	*type = data->trips[trip].type;
+ 	*type = data->trips[trip].type;
 @@ -304,12 +311,39 @@ static int of_thermal_get_trip_type(stru
-	return 0;
+ 	return 0;
  }
-
+ 
 +static int of_thermal_activate_trip_type(struct thermal_zone_device *tz,
 +			int trip, enum thermal_trip_activation_mode mode)
 +{
@@ -131,109 +131,109 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
 +}
 +
  static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
-				    int *temp)
+ 				    int *temp)
  {
-	struct __thermal_zone *data = tz->devdata;
+ 	struct __thermal_zone *data = tz->devdata;
-
+ 
 -	if (trip >= data->ntrips || trip < 0)
 +	if (trip >= data->ntrips || trip < 0
 +				|| (data->mode == THERMAL_DEVICE_DISABLED))
-		return -EDOM;
+ 		return -EDOM;
-
+ 
-	*temp = data->trips[trip].temperature;
+ 	*temp = data->trips[trip].temperature;
 @@ -322,7 +356,8 @@ static int of_thermal_set_trip_temp(stru
  {
-	struct __thermal_zone *data = tz->devdata;
+ 	struct __thermal_zone *data = tz->devdata;
-
+ 
 -	if (trip >= data->ntrips || trip < 0)
 +	if (trip >= data->ntrips || trip < 0
 +				|| (data->mode == THERMAL_DEVICE_DISABLED))
-		return -EDOM;
+ 		return -EDOM;
-
+ 
-	if (data->ops->set_trip_temp) {
+ 	if (data->ops->set_trip_temp) {
 @@ -344,7 +379,8 @@ static int of_thermal_get_trip_hyst(stru
  {
-	struct __thermal_zone *data = tz->devdata;
+ 	struct __thermal_zone *data = tz->devdata;
-
+ 
 -	if (trip >= data->ntrips || trip < 0)
 +	if (trip >= data->ntrips || trip < 0
 +				|| (data->mode == THERMAL_DEVICE_DISABLED))
-		return -EDOM;
+ 		return -EDOM;
-
+ 
-	*hyst = data->trips[trip].hysteresis;
+ 	*hyst = data->trips[trip].hysteresis;
 @@ -357,7 +393,8 @@ static int of_thermal_set_trip_hyst(stru
  {
-	struct __thermal_zone *data = tz->devdata;
+ 	struct __thermal_zone *data = tz->devdata;
-
+ 
 -	if (trip >= data->ntrips || trip < 0)
 +	if (trip >= data->ntrips || trip < 0
 +				|| (data->mode == THERMAL_DEVICE_DISABLED))
-		return -EDOM;
+ 		return -EDOM;
-
+ 
-	/* thermal framework should take care of data->mask & (1 << trip) */
+ 	/* thermal framework should take care of data->mask & (1 << trip) */
 @@ -432,6 +469,9 @@ thermal_zone_of_add_sensor(struct device
-	if (ops->set_emul_temp)
+ 	if (ops->set_emul_temp)
-		tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
+ 		tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
-
+ 
 +	if (ops->set_trip_activate)
 +		tzd->ops->set_trip_activate = of_thermal_activate_trip_type;
 +
-	mutex_unlock(&tzd->lock);
+ 	mutex_unlock(&tzd->lock);
-
+ 
-	return tzd;
+ 	return tzd;
 @@ -726,7 +766,10 @@ static const char * const trip_types[] =
-	[THERMAL_TRIP_ACTIVE]	= "active",
+ 	[THERMAL_TRIP_ACTIVE]	= "active",
-	[THERMAL_TRIP_PASSIVE]	= "passive",
+ 	[THERMAL_TRIP_PASSIVE]	= "passive",
-	[THERMAL_TRIP_HOT]	= "hot",
+ 	[THERMAL_TRIP_HOT]	= "hot",
 -	[THERMAL_TRIP_CRITICAL]	= "critical",
 +	[THERMAL_TRIP_CRITICAL]	= "critical_high",
 +	[THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi",
 +	[THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo",
 +	[THERMAL_TRIP_CRITICAL_LOW] = "critical_low",
  };
-
+ 
  /**
 --- a/drivers/thermal/qcom/tsens.c
 +++ b/drivers/thermal/qcom/tsens.c
 @@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, in
-
+ 
  static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
  {
 -	const struct tsens_sensor *s = p;
 +	struct tsens_sensor *s = p;
-	struct tsens_device *tmdev = s->tmdev;
+ 	struct tsens_device *tmdev = s->tmdev;
-
+ 
-	if (tmdev->ops->get_trend)
+ 	if (tmdev->ops->get_trend)
 @@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int
-	return -ENOTSUPP;
+ 	return -ENOTSUPP;
  }
-
+ 
 -static int  __maybe_unused tsens_suspend(struct device *dev)
 +static int  __maybe_unused tsens_suspend(void *data)
  {
 -	struct tsens_device *tmdev = dev_get_drvdata(dev);
 +	struct tsens_sensor *s = data;
 +	struct tsens_device *tmdev = s->tmdev;
-
+ 
-	if (tmdev->ops && tmdev->ops->suspend)
+ 	if (tmdev->ops && tmdev->ops->suspend)
-		return tmdev->ops->suspend(tmdev);
+ 		return tmdev->ops->suspend(tmdev);
 @@ -50,9 +51,10 @@ static int  __maybe_unused tsens_suspend
-	return 0;
+ 	return 0;
  }
-
+ 
 -static int __maybe_unused tsens_resume(struct device *dev)
 +static int __maybe_unused tsens_resume(void *data)
  {
 -	struct tsens_device *tmdev = dev_get_drvdata(dev);
 +	struct tsens_sensor *s = data;
 +	struct tsens_device *tmdev = s->tmdev;
-
+ 
-	if (tmdev->ops && tmdev->ops->resume)
+ 	if (tmdev->ops && tmdev->ops->resume)
-		return tmdev->ops->resume(tmdev);
+ 		return tmdev->ops->resume(tmdev);
 @@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(s
-	return 0;
+ 	return 0;
  }
-
+ 
 +static int  __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp)
 +{
 +	struct tsens_sensor *s = data;
@@ -259,50 +259,50 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
 +
 +
  static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
-
+ 
  static const struct of_device_id tsens_table[] = {
 @@ -83,6 +109,8 @@ MODULE_DEVICE_TABLE(of, tsens_table);
  static const struct thermal_zone_of_device_ops tsens_of_ops = {
-	.get_temp = tsens_get_temp,
+ 	.get_temp = tsens_get_temp,
-	.get_trend = tsens_get_trend,
+ 	.get_trend = tsens_get_trend,
 +	.set_trip_temp = tsens_set_trip_temp,
 +	.set_trip_activate = tsens_activate_trip_type,
  };
-
+ 
  static int tsens_register(struct tsens_device *tmdev)
 @@ -131,7 +159,7 @@ static int tsens_probe(struct platform_d
-	if (id)
+ 	if (id)
-		data = id->data;
+ 		data = id->data;
-	else
+ 	else
 -		data = &data_8960;
 +		return -EINVAL;
-
+ 
-	if (data->num_sensors <= 0) {
+ 	if (data->num_sensors <= 0) {
-		dev_err(dev, "invalid number of sensors\n");
+ 		dev_err(dev, "invalid number of sensors\n");
 @@ -146,6 +174,9 @@ static int tsens_probe(struct platform_d
-	tmdev->dev = dev;
+ 	tmdev->dev = dev;
-	tmdev->num_sensors = data->num_sensors;
+ 	tmdev->num_sensors = data->num_sensors;
-	tmdev->ops = data->ops;
+ 	tmdev->ops = data->ops;
 +
 +	tmdev->tsens_irq = platform_get_irq(pdev, 0);
 +
-	for (i = 0;  i < tmdev->num_sensors; i++) {
+ 	for (i = 0;  i < tmdev->num_sensors; i++) {
-		if (data->hw_ids)
+ 		if (data->hw_ids)
-			tmdev->sensor[i].hw_id = data->hw_ids[i];
+ 			tmdev->sensor[i].hw_id = data->hw_ids[i];
 --- a/drivers/thermal/qcom/tsens.h
 +++ b/drivers/thermal/qcom/tsens.h
 @@ -24,9 +24,12 @@ struct tsens_device;
  struct tsens_sensor {
-	struct tsens_device		*tmdev;
+ 	struct tsens_device		*tmdev;
-	struct thermal_zone_device	*tzd;
+ 	struct thermal_zone_device	*tzd;
 +	struct work_struct		notify_work;
-	int				offset;
+ 	int				offset;
-	int				id;
+ 	int				id;
-	int				hw_id;
+ 	int				hw_id;
 +	int				calib_data;
 +	int				calib_data_backup;
-	int				slope;
+ 	int				slope;
-	u32				status;
+ 	u32				status;
  };
 @@ -41,6 +44,9 @@ struct tsens_sensor {
   * @suspend: Function to suspend the tsens device
@@ -313,48 +313,48 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
 + * @set_trip_activate: Function to activate trip points
   */
  struct tsens_ops {
-	/* mandatory callbacks */
+ 	/* mandatory callbacks */
 @@ -53,6 +59,9 @@ struct tsens_ops {
-	int (*suspend)(struct tsens_device *);
+ 	int (*suspend)(struct tsens_device *);
-	int (*resume)(struct tsens_device *);
+ 	int (*resume)(struct tsens_device *);
-	int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
+ 	int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
 +	int (*set_trip_temp)(void *, int, int);
 +	int (*set_trip_activate)(void *, int,
 +					enum thermal_trip_activation_mode);
  };
-
+ 
  /**
 @@ -76,11 +85,13 @@ struct tsens_context {
  struct tsens_device {
-	struct device			*dev;
+ 	struct device			*dev;
-	u32				num_sensors;
+ 	u32				num_sensors;
 +	u32				tsens_irq;
-	struct regmap			*map;
+ 	struct regmap			*map;
-	struct regmap_field		*status_field;
+ 	struct regmap_field		*status_field;
-	struct tsens_context		ctx;
+ 	struct tsens_context		ctx;
-	bool				trdy;
+ 	bool				trdy;
-	const struct tsens_ops		*ops;
+ 	const struct tsens_ops		*ops;
 +	struct work_struct		tsens_work;
-	struct tsens_sensor		sensor[0];
+ 	struct tsens_sensor		sensor[0];
  };
-
+ 
 --- a/drivers/thermal/thermal_sysfs.c
 +++ b/drivers/thermal/thermal_sysfs.c
-@@ -115,12 +115,48 @@
+@@ -115,12 +115,48 @@ trip_point_type_show(struct device *dev,
-		return sprintf(buf, "passive\n");
+ 		return sprintf(buf, "passive\n");
-	case THERMAL_TRIP_ACTIVE:
+ 	case THERMAL_TRIP_ACTIVE:
-		return sprintf(buf, "active\n");
+ 		return sprintf(buf, "active\n");
 +	case THERMAL_TRIP_CONFIGURABLE_HI:
 +		return sprintf(buf, "configurable_hi\n");
 +	case THERMAL_TRIP_CONFIGURABLE_LOW:
 +		return sprintf(buf, "configurable_low\n");
 +	case THERMAL_TRIP_CRITICAL_LOW:
 +		return sprintf(buf, "critical_low\n");
-	default:
+ 	default:
-		return sprintf(buf, "unknown\n");
+ 		return sprintf(buf, "unknown\n");
-	}
+ 	}
  }
-
+ 
  static ssize_t
 +trip_point_type_activate(struct device *dev, struct device_attribute *attr,
 +						const char *buf, size_t count)
@@ -387,52 +387,52 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
 +
 +static ssize_t
  trip_point_temp_store(struct device *dev, struct device_attribute *attr,
-		      const char *buf, size_t count)
+ 		      const char *buf, size_t count)
  {
-@@ -562,6 +598,12 @@
+@@ -562,6 +598,12 @@ static int create_trip_attrs(struct ther
-		tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
+ 		tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
-		attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
+ 		attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
-
+ 
 +		if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) {
 +			tz->trip_type_attrs[indx].attr.store
 +						= trip_point_type_activate;
 +			tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR;
 +		}
 +
-		/* create trip temp attribute */
+ 		/* create trip temp attribute */
-		snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
+ 		snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
-			 "trip_point_%d_temp", indx);
+ 			 "trip_point_%d_temp", indx);
 --- a/include/linux/thermal.h
 +++ b/include/linux/thermal.h
 @@ -78,11 +78,19 @@ enum thermal_device_mode {
-	THERMAL_DEVICE_ENABLED,
+ 	THERMAL_DEVICE_ENABLED,
  };
-
+ 
 +enum thermal_trip_activation_mode {
 +	THERMAL_TRIP_ACTIVATION_DISABLED = 0,
 +	THERMAL_TRIP_ACTIVATION_ENABLED,
 +};
 +
  enum thermal_trip_type {
-	THERMAL_TRIP_ACTIVE = 0,
+ 	THERMAL_TRIP_ACTIVE = 0,
-	THERMAL_TRIP_PASSIVE,
+ 	THERMAL_TRIP_PASSIVE,
-	THERMAL_TRIP_HOT,
+ 	THERMAL_TRIP_HOT,
-	THERMAL_TRIP_CRITICAL,
+ 	THERMAL_TRIP_CRITICAL,
 +	THERMAL_TRIP_CONFIGURABLE_HI,
 +	THERMAL_TRIP_CONFIGURABLE_LOW,
 +	THERMAL_TRIP_CRITICAL_LOW,
  };
-
+ 
  enum thermal_trend {
 @@ -120,6 +128,8 @@ struct thermal_zone_device_ops {
-		enum thermal_trip_type *);
+ 		enum thermal_trip_type *);
-	int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
+ 	int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
-	int (*set_trip_temp) (struct thermal_zone_device *, int, int);
+ 	int (*set_trip_temp) (struct thermal_zone_device *, int, int);
 +	int (*set_trip_activate) (struct thermal_zone_device *, int,
 +					enum thermal_trip_activation_mode);
-	int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
+ 	int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
-	int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
+ 	int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
-	int (*get_crit_temp) (struct thermal_zone_device *, int *);
+ 	int (*get_crit_temp) (struct thermal_zone_device *, int *);
 @@ -363,6 +373,8 @@ struct thermal_genl_event {
   *		   temperature.
   * @set_trip_temp: a pointer to a function that sets the trip temperature on
@@ -441,13 +441,13 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
 + *		temperature interrupts
   */
  struct thermal_zone_of_device_ops {
-	int (*get_temp)(void *, int *);
+ 	int (*get_temp)(void *, int *);
 @@ -370,6 +382,8 @@ struct thermal_zone_of_device_ops {
-	int (*set_trips)(void *, int, int);
+ 	int (*set_trips)(void *, int, int);
-	int (*set_emul_temp)(void *, int);
+ 	int (*set_emul_temp)(void *, int);
-	int (*set_trip_temp)(void *, int, int);
+ 	int (*set_trip_temp)(void *, int, int);
 +	int (*set_trip_activate)(void *, int,
 +				enum thermal_trip_activation_mode);
  };
-
+ 
  /**

target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch

@@ -13,19 +13,19 @@ Signed-off-by: John Crispin <john@phrozen.org>
 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
 +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
 @@ -13,6 +13,7 @@ Required properties :
-			"qcom,rpmcc-msm8916", "qcom,rpmcc"
+ 			"qcom,rpmcc-msm8916", "qcom,rpmcc"
-			"qcom,rpmcc-msm8974", "qcom,rpmcc"
+ 			"qcom,rpmcc-msm8974", "qcom,rpmcc"
-			"qcom,rpmcc-apq8064", "qcom,rpmcc"
+ 			"qcom,rpmcc-apq8064", "qcom,rpmcc"
 +			"qcom,rpmcc-ipq806x", "qcom,rpmcc"
-
+ 
  - #clock-cells : shall contain 1
-
+ 
 --- a/drivers/clk/qcom/clk-rpm.c
 +++ b/drivers/clk/qcom/clk-rpm.c
 @@ -359,6 +359,16 @@ DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a
  DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
  DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK);
-
+ 
 +/* ipq806x */
 +DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
 +DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
@@ -37,12 +37,12 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
 +
  static struct clk_rpm *apq8064_clks[] = {
-	[RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
+ 	[RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
-	[RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
+ 	[RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
 @@ -380,13 +390,38 @@ static struct clk_rpm *apq8064_clks[] =
-	[RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
+ 	[RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
  };
-
+ 
 +static struct clk_rpm *ipq806x_clks[] = {
 +	[RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
 +	[RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
@@ -63,19 +63,19 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +};
 +
  static const struct rpm_clk_desc rpm_clk_apq8064 = {
-	.clks = apq8064_clks,
+ 	.clks = apq8064_clks,
-	.num_clks = ARRAY_SIZE(apq8064_clks),
+ 	.num_clks = ARRAY_SIZE(apq8064_clks),
  };
-
+ 
 +static const struct rpm_clk_desc rpm_clk_ipq806x = {
 +	.clks = ipq806x_clks,
 +	.num_clks = ARRAY_SIZE(ipq806x_clks),
 +};
 +
  static const struct of_device_id rpm_clk_match_table[] = {
-	{ .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
+ 	{ .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
 +	{ .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
-	{ }
+ 	{ }
  };
  MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
 --- a/include/dt-bindings/clock/qcom,rpmcc.h
@@ -88,6 +88,6 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +#define RPM_NSS_FABRIC_0_A_CLK				23
 +#define RPM_NSS_FABRIC_1_CLK				24
 +#define RPM_NSS_FABRIC_1_A_CLK				25
-
+ 
  /* SMD RPM clocks */
  #define RPM_SMD_XO_CLK_SRC				0

target/linux/ipq806x/patches-4.14/0066-GPIO-add-named-gpio-exports.patch

@@ -19,12 +19,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  #include <linux/gpio/machine.h>
 +#include <linux/init.h>
 +#include <linux/platform_device.h>
-
+ 
  #include "gpiolib.h"
-
+ 
 @@ -506,3 +508,69 @@ void of_gpiochip_remove(struct gpio_chip
-	gpiochip_remove_pin_ranges(chip);
+ 	gpiochip_remove_pin_ranges(chip);
-	of_node_put(chip->of_node);
+ 	of_node_put(chip->of_node);
  }
 +
 +static struct of_device_id gpio_export_ids[] = {
@@ -101,20 +101,20 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 -int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 +int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
  {
-	struct gpio_chip	*chip;
+ 	struct gpio_chip	*chip;
-	struct gpio_device	*gdev;
+ 	struct gpio_device	*gdev;
 @@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
-	offset = gpio_chip_hwgpio(desc);
+ 	offset = gpio_chip_hwgpio(desc);
-	if (chip->names && chip->names[offset])
+ 	if (chip->names && chip->names[offset])
-		ioname = chip->names[offset];
+ 		ioname = chip->names[offset];
 +	if (name)
 +		ioname = name;
-
+ 
-	dev = device_create_with_groups(&gpio_class, &gdev->dev,
+ 	dev = device_create_with_groups(&gpio_class, &gdev->dev,
-					MKDEV(0, 0), data, gpio_groups,
+ 					MKDEV(0, 0), data, gpio_groups,
 @@ -636,6 +638,12 @@ err_unlock:
-	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
-	return status;
+ 	return status;
  }
 +EXPORT_SYMBOL_GPL(__gpiod_export);
 +
@@ -123,14 +123,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	return __gpiod_export(desc, direction_may_change, NULL);
 +}
  EXPORT_SYMBOL_GPL(gpiod_export);
-
+ 
  static int match_export(struct device *dev, const void *desc)
 --- a/include/asm-generic/gpio.h
 +++ b/include/asm-generic/gpio.h
 @@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
-	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
  }
-
+ 
 +int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
 +static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
 +{
@@ -138,22 +138,22 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +}
 +
  static inline int gpio_export_link(struct device *dev, const char *name,
-				   unsigned gpio)
+ 				   unsigned gpio)
  {
 --- a/include/linux/gpio/consumer.h
 +++ b/include/linux/gpio/consumer.h
-@@ -451,6 +451,7 @@ static inline struct gpio_desc *devm_get
+@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
-
+ 
  #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
+ 
 +int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
  int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
  int gpiod_export_link(struct device *dev, const char *name,
-		      struct gpio_desc *desc);
+ 		      struct gpio_desc *desc);
 @@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
-
+ 
  #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
+ 
 +static inline int _gpiod_export(struct gpio_desc *desc,
 +			       bool direction_may_change,
 +			       const char *name)
@@ -162,5 +162,5 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +}
 +
  static inline int gpiod_export(struct gpio_desc *desc,
-			       bool direction_may_change)
+ 			       bool direction_may_change)
  {

target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch

@@ -23,9 +23,9 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
 @@ -1938,6 +1938,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
-	  The command-line arguments provided by the boot loader will be
+ 	  The command-line arguments provided by the boot loader will be
-	  appended to the the device tree bootargs property.
+ 	  appended to the the device tree bootargs property.
-
+ 
 +config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
 +	bool "Append rootblock parsing bootloader's kernel arguments"
 +	help
@@ -38,12 +38,12 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
 +	  sent by bootloader will be ignored.
 +
  endchoice
-
+ 
  config CMDLINE
 --- a/arch/arm/boot/compressed/atags_to_fdt.c
 +++ b/arch/arm/boot/compressed/atags_to_fdt.c
 @@ -4,6 +4,8 @@
-
+ 
  #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
  #define do_extend_cmdline 1
 +#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
@@ -52,9 +52,9 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
  #define do_extend_cmdline 0
  #endif
 @@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void
-	return cell_size;
+ 	return cell_size;
  }
-
+ 
 +#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
 +
 +static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
@@ -110,11 +110,11 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
 +
  static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
  {
-	char cmdline[COMMAND_LINE_SIZE];
+ 	char cmdline[COMMAND_LINE_SIZE];
 @@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt
-
+ 
-	/* and append the ATAG_CMDLINE */
+ 	/* and append the ATAG_CMDLINE */
-	if (fdt_cmdline) {
+ 	if (fdt_cmdline) {
 +
 +#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
 +		//save original bootloader args
@@ -123,55 +123,55 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
 +		ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
 +
 +#else
-		len = strlen(fdt_cmdline);
+ 		len = strlen(fdt_cmdline);
-		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
+ 		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
-			*ptr++ = ' ';
+ 			*ptr++ = ' ';
-			memcpy(ptr, fdt_cmdline, len);
+ 			memcpy(ptr, fdt_cmdline, len);
-			ptr += len;
+ 			ptr += len;
-		}
+ 		}
 +#endif
-	}
+ 	}
-	*ptr = '\0';
+ 	*ptr = '\0';
-
+ 
 @@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void *
-			else
+ 			else
-				setprop_string(fdt, "/chosen", "bootargs",
+ 				setprop_string(fdt, "/chosen", "bootargs",
-					       atag->u.cmdline.cmdline);
+ 					       atag->u.cmdline.cmdline);
 -		} else if (atag->hdr.tag == ATAG_MEM) {
 +		}
 +#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
 +		else if (atag->hdr.tag == ATAG_MEM) {
-			if (memcount >= sizeof(mem_reg_property)/4)
+ 			if (memcount >= sizeof(mem_reg_property)/4)
-				continue;
+ 				continue;
-			if (!atag->u.mem.size)
+ 			if (!atag->u.mem.size)
 @@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void *
-		setprop(fdt, "/memory", "reg", mem_reg_property,
+ 		setprop(fdt, "/memory", "reg", mem_reg_property,
-			4 * memcount * memsize);
+ 			4 * memcount * memsize);
-	}
+ 	}
 +#else
 +
 +	}
 +#endif
-
+ 
-	return fdt_pack(fdt);
+ 	return fdt_pack(fdt);
  }
 --- a/init/main.c
 +++ b/init/main.c
 @@ -95,6 +95,10 @@
  #include <asm/sections.h>
  #include <asm/cacheflush.h>
-
+ 
 +#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
 +#include <linux/of.h>
 +#endif
 +
  static int kernel_init(void *);
-
+ 
  extern void init_IRQ(void);
 @@ -574,6 +578,18 @@ asmlinkage __visible void __init start_k
-	page_alloc_init();
+ 	page_alloc_init();
-
+ 
-	pr_notice("Kernel command line: %s\n", boot_command_line);
+ 	pr_notice("Kernel command line: %s\n", boot_command_line);
 +
 +#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
 +	//Show bootloader's original command line for reference
@@ -184,6 +184,6 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
 +	}
 +#endif
 +
-	parse_early_param();
+ 	parse_early_param();
-	after_dashes = parse_args("Booting kernel",
+ 	after_dashes = parse_args("Booting kernel",
-				  static_command_line, __start___param,
+ 				  static_command_line, __start___param,

target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch

@@ -11,9 +11,9 @@ Signed-off-by: John Crispin <john@phrozen.org>
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
 @@ -699,6 +699,15 @@ dtb-$(CONFIG_ARCH_QCOM) += \
-	qcom-apq8084-mtp.dtb \
+ 	qcom-apq8084-mtp.dtb \
-	qcom-ipq4019-ap.dk01.1-c1.dtb \
+ 	qcom-ipq4019-ap.dk01.1-c1.dtb \
-	qcom-ipq8064-ap148.dtb \
+ 	qcom-ipq8064-ap148.dtb \
 +	qcom-ipq8064-c2600.dtb \
 +	qcom-ipq8064-d7800.dtb \
 +	qcom-ipq8064-db149.dtb \
@@ -23,6 +23,6 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +	qcom-ipq8064-wpq864.dtb \
 +	qcom-ipq8065-nbg6817.dtb \
 +	qcom-ipq8065-r7800.dtb \
-	qcom-msm8660-surf.dtb \
+ 	qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb \
+ 	qcom-msm8960-cdp.dtb \
-	qcom-msm8974-lge-nexus5-hammerhead.dtb \
+ 	qcom-msm8974-lge-nexus5-hammerhead.dtb \

target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch

@@ -5,12 +5,12 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 --- a/drivers/soc/qcom/spm.c
 +++ b/drivers/soc/qcom/spm.c
 @@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
-	cpumask_t mask;
+ 	cpumask_t mask;
-	bool use_scm_power_down = false;
+ 	bool use_scm_power_down = false;
-
+ 
 +	if (!qcom_scm_is_available())
 +		return -EPROBE_DEFER;
 +
-	for (i = 0; ; i++) {
+ 	for (i = 0; ; i++) {
-		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+ 		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
-		if (!state_node)
+ 		if (!state_node)

target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch

@@ -11,19 +11,19 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 
 --- a/drivers/pci/dwc/pcie-qcom.c
 +++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -91,6 +91,8 @@
+@@ -91,6 +91,8 @@ struct qcom_pcie_resources_2_1_0 {
-	struct clk *iface_clk;
+ 	struct clk *iface_clk;
-	struct clk *core_clk;
+ 	struct clk *core_clk;
-	struct clk *phy_clk;
+ 	struct clk *phy_clk;
 +	struct clk *aux_clk;
 +	struct clk *ref_clk;
-	struct reset_control *pci_reset;
+ 	struct reset_control *pci_reset;
-	struct reset_control *axi_reset;
+ 	struct reset_control *axi_reset;
-	struct reset_control *ahb_reset;
+ 	struct reset_control *ahb_reset;
-@@ -249,6 +251,14 @@
+@@ -249,6 +251,14 @@ static int qcom_pcie_get_resources_2_1_0
-	if (IS_ERR(res->phy_clk))
+ 	if (IS_ERR(res->phy_clk))
-		return PTR_ERR(res->phy_clk);
+ 		return PTR_ERR(res->phy_clk);
-
+ 
 +	res->aux_clk = devm_clk_get(dev, "aux");
 +	if (IS_ERR(res->aux_clk))
 +		return PTR_ERR(res->aux_clk);
@@ -32,37 +32,37 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 +	if (IS_ERR(res->ref_clk))
 +		return PTR_ERR(res->ref_clk);
 +
-	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
+ 	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
-	if (IS_ERR(res->pci_reset))
+ 	if (IS_ERR(res->pci_reset))
-		return PTR_ERR(res->pci_reset);
+ 		return PTR_ERR(res->pci_reset);
-@@ -281,6 +291,8 @@
+@@ -281,6 +291,8 @@ static void qcom_pcie_deinit_2_1_0(struc
-	clk_disable_unprepare(res->iface_clk);
+ 	clk_disable_unprepare(res->iface_clk);
-	clk_disable_unprepare(res->core_clk);
+ 	clk_disable_unprepare(res->core_clk);
-	clk_disable_unprepare(res->phy_clk);
+ 	clk_disable_unprepare(res->phy_clk);
 +	clk_disable_unprepare(res->aux_clk);
 +	clk_disable_unprepare(res->ref_clk);
-	regulator_disable(res->vdda);
+ 	regulator_disable(res->vdda);
-	regulator_disable(res->vdda_phy);
+ 	regulator_disable(res->vdda_phy);
-	regulator_disable(res->vdda_refclk);
+ 	regulator_disable(res->vdda_refclk);
-@@ -324,16 +336,28 @@
+@@ -324,16 +336,28 @@ static int qcom_pcie_init_2_1_0(struct q
-		goto err_assert_ahb;
+ 		goto err_assert_ahb;
-	}
+ 	}
-
+ 
 +	ret = clk_prepare_enable(res->core_clk);
 +	if (ret) {
 +		dev_err(dev, "cannot prepare/enable core clock\n");
 +		goto err_clk_core;
 +	}
 +
-	ret = clk_prepare_enable(res->phy_clk);
+ 	ret = clk_prepare_enable(res->phy_clk);
-	if (ret) {
+ 	if (ret) {
-		dev_err(dev, "cannot prepare/enable phy clock\n");
+ 		dev_err(dev, "cannot prepare/enable phy clock\n");
-		goto err_clk_phy;
+ 		goto err_clk_phy;
-	}
+ 	}
-
+ 
 -	ret = clk_prepare_enable(res->core_clk);
 +	ret = clk_prepare_enable(res->aux_clk);
-	if (ret) {
+ 	if (ret) {
 -		dev_err(dev, "cannot prepare/enable core clock\n");
 -		goto err_clk_core;
 +		dev_err(dev, "cannot prepare/enable aux clock\n");
@@ -73,12 +73,12 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 +	if (ret) {
 +		dev_err(dev, "cannot prepare/enable ref clock\n");
 +		goto err_clk_ref;
-	}
+ 	}
-
+ 
-	ret = reset_control_deassert(res->ahb_reset);
+ 	ret = reset_control_deassert(res->ahb_reset);
-@@ -389,10 +413,14 @@
+@@ -389,10 +413,14 @@ static int qcom_pcie_init_2_1_0(struct q
-	return 0;
+ 	return 0;
-
+ 
  err_deassert_ahb:
 -	clk_disable_unprepare(res->core_clk);
 -err_clk_core:
@@ -86,10 +86,10 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 +err_clk_ref:
 +	clk_disable_unprepare(res->aux_clk);
 +err_clk_aux:
-	clk_disable_unprepare(res->phy_clk);
+ 	clk_disable_unprepare(res->phy_clk);
  err_clk_phy:
 +	clk_disable_unprepare(res->core_clk);
 +err_clk_core:
-	clk_disable_unprepare(res->iface_clk);
+ 	clk_disable_unprepare(res->iface_clk);
  err_assert_ahb:
-	regulator_disable(res->vdda_phy);
+ 	regulator_disable(res->vdda_phy);

target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch

@@ -11,7 +11,7 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 
 --- a/drivers/pci/dwc/pcie-qcom.c
 +++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -98,6 +98,7 @@
+@@ -98,6 +98,7 @@ struct qcom_pcie_resources_2_1_0 {
  	struct reset_control *ahb_reset;
  	struct reset_control *por_reset;
  	struct reset_control *phy_reset;
@@ -19,10 +19,10 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
  	struct regulator *vdda;
  	struct regulator *vdda_phy;
  	struct regulator *vdda_refclk;
-@@ -275,6 +276,10 @@
+@@ -275,6 +276,10 @@ static int qcom_pcie_get_resources_2_1_0
  	if (IS_ERR(res->por_reset))
  		return PTR_ERR(res->por_reset);
-
+ 
 +	res->ext_reset = devm_reset_control_get(dev, "ext");
 +	if (IS_ERR(res->ext_reset))
 +		return PTR_ERR(res->ext_reset);
@@ -30,7 +30,7 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
  	res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
  	return PTR_ERR_OR_ZERO(res->phy_reset);
  }
-@@ -288,6 +293,7 @@
+@@ -288,6 +293,7 @@ static void qcom_pcie_deinit_2_1_0(struc
  	reset_control_assert(res->ahb_reset);
  	reset_control_assert(res->por_reset);
  	reset_control_assert(res->pci_reset);
@@ -38,10 +38,10 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
  	clk_disable_unprepare(res->iface_clk);
  	clk_disable_unprepare(res->core_clk);
  	clk_disable_unprepare(res->phy_clk);
-@@ -306,6 +312,12 @@
+@@ -306,6 +312,12 @@ static int qcom_pcie_init_2_1_0(struct q
  	u32 val;
  	int ret;
-
+ 
 +	ret = reset_control_assert(res->ahb_reset);
 +	if (ret) {
 +		dev_err(dev, "cannot assert ahb reset\n");
@@ -51,10 +51,10 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
  	ret = regulator_enable(res->vdda);
  	if (ret) {
  		dev_err(dev, "cannot enable vdda regulator\n");
-@@ -324,16 +336,16 @@
+@@ -324,16 +336,16 @@ static int qcom_pcie_init_2_1_0(struct q
  		goto err_vdda_phy;
  	}
-
+ 
 -	ret = reset_control_assert(res->ahb_reset);
 +	ret = reset_control_deassert(res->ext_reset);
  	if (ret) {
@@ -63,16 +63,16 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 +		dev_err(dev, "cannot assert ext reset\n");
 +		goto err_reset_ext;
  	}
-
+ 
  	ret = clk_prepare_enable(res->iface_clk);
  	if (ret) {
  		dev_err(dev, "cannot prepare/enable iface clock\n");
 -		goto err_assert_ahb;
 +		goto err_iface;
  	}
-
+ 
  	ret = clk_prepare_enable(res->core_clk);
-@@ -422,7 +434,9 @@
+@@ -422,7 +434,9 @@ err_clk_phy:
  	clk_disable_unprepare(res->core_clk);
  err_clk_core:
  	clk_disable_unprepare(res->iface_clk);

target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch

@@ -13,7 +13,7 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 +++ b/drivers/pci/dwc/pcie-qcom.c
 @@ -52,7 +52,13 @@
  #define PCIE_CAP_CPL_TIMEOUT_DISABLE		0x10
-
+ 
  #define PCIE20_PARF_PHY_CTRL			0x40
 +#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	(0x1f << 16)
 +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		(x << 16)
@@ -27,7 +27,7 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
  #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL	0x174
 @@ -83,6 +89,18 @@
  #define DBI_RO_WR_EN				1
-
+ 
  #define PERST_DELAY_US				1000
 +/* PARF registers */
 +#define PCIE20_PARF_PCS_DEEMPH			0x34
@@ -41,21 +41,21 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 +
 +#define PCIE20_PARF_CONFIG_BITS			0x50
 +#define PHY_RX0_EQ(x)				(x << 24)
-
+ 
  #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE	0x358
  #define SLV_ADDR_SPACE_SZ			0x10000000
-@@ -102,6 +120,7 @@
+@@ -102,6 +120,7 @@ struct qcom_pcie_resources_2_1_0 {
  	struct regulator *vdda;
  	struct regulator *vdda_phy;
  	struct regulator *vdda_refclk;
 +	uint8_t phy_tx0_term_offset;
  };
-
+ 
  struct qcom_pcie_resources_1_0_0 {
-@@ -179,6 +198,16 @@
+@@ -179,6 +198,16 @@ struct qcom_pcie {
-
+ 
  #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
-
+ 
 +static inline void
 +writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
 +{
@@ -69,10 +69,10 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
  static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
  {
  	gpiod_set_value_cansleep(pcie->reset, 1);
-@@ -280,6 +309,10 @@
+@@ -280,6 +309,10 @@ static int qcom_pcie_get_resources_2_1_0
  	if (IS_ERR(res->ext_reset))
  		return PTR_ERR(res->ext_reset);
-
+ 
 +	if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
 +				&res->phy_tx0_term_offset))
 +		res->phy_tx0_term_offset = 0;
@@ -80,18 +80,18 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
  	res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
  	return PTR_ERR_OR_ZERO(res->phy_reset);
  }
-@@ -309,7 +342,6 @@
+@@ -309,7 +342,6 @@ static int qcom_pcie_init_2_1_0(struct q
  	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
  	struct dw_pcie *pci = pcie->pci;
  	struct device *dev = pci->dev;
 -	u32 val;
  	int ret;
-
+ 
  	ret = reset_control_assert(res->ahb_reset);
-@@ -378,15 +410,26 @@
+@@ -378,15 +410,26 @@ static int qcom_pcie_init_2_1_0(struct q
  		goto err_deassert_ahb;
  	}
-
+ 
 -	/* enable PCIe clocks and resets */
 -	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
 -	val &= ~BIT(0);
@@ -121,6 +121,6 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 +	/* Enable reference clock */
 +	writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
 +		      REF_USE_PAD, REF_SSP_EN);
-
+ 
  	ret = reset_control_deassert(res->phy_reset);
  	if (ret) {

target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch

@@ -16,7 +16,7 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 @@ -83,6 +83,30 @@
  #define PCIE20_CAP_LINK_1			(PCIE20_CAP + 0x14)
  #define PCIE_CAP_LINK1_VAL			0x2FD7F
-
+ 
 +#define PCIE20_CAP_LINKCTRLSTATUS		(PCIE20_CAP + 0x10)
 +
 +#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0		0x818
@@ -42,12 +42,12 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 +#define MSM_PCIE_DEV_CFG_ADDR			0x01000000
 +
  #define PCIE20_PARF_Q2A_FLUSH			0x1AC
-
+ 
  #define PCIE20_MISC_CONTROL_1_REG		0x8BC
-@@ -251,6 +275,57 @@
+@@ -251,6 +275,57 @@ static void qcom_pcie_2_1_0_ltssm_enable
-	writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
+ 	writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
  }
-
+ 
 +static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
 +{
 +	struct pcie_port *pp = &pcie->pci->pp;
@@ -101,14 +101,14 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 +
  static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
  {
-	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+ 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-@@ -465,6 +538,9 @@
+@@ -465,6 +540,9 @@ static int qcom_pcie_init_2_1_0(struct q
-	writel(CFG_BRIDGE_SB_INIT,
+ 	writel(CFG_BRIDGE_SB_INIT,
-	       pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
+ 	       pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
-
+ 
 +	qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
 +	qcom_pcie_prog_viewport_mem2_outbound(pcie);
 +
-	return 0;
+ 	return 0;
-
+ 
  err_deassert_ahb:

target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch

@@ -14,48 +14,48 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
 @@ -129,6 +129,8 @@
  #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE	0x358
  #define SLV_ADDR_SPACE_SZ			0x10000000
-
+ 
 +#define PCIE20_LNK_CONTROL2_LINK_STATUS2        0xA0
 +
  struct qcom_pcie_resources_2_1_0 {
-	struct clk *iface_clk;
+ 	struct clk *iface_clk;
-	struct clk *core_clk;
+ 	struct clk *core_clk;
-@@ -218,6 +220,7 @@
+@@ -218,6 +220,7 @@ struct qcom_pcie {
-	struct phy *phy;
+ 	struct phy *phy;
-	struct gpio_desc *reset;
+ 	struct gpio_desc *reset;
-	struct qcom_pcie_ops *ops;
+ 	struct qcom_pcie_ops *ops;
 +	uint32_t force_gen1;
  };
-
+ 
  #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
-@@ -532,6 +535,11 @@
+@@ -532,6 +535,11 @@ static int qcom_pcie_init_2_1_0(struct q
-
+ 
-	/* wait for clock acquisition */
+ 	/* wait for clock acquisition */
-	usleep_range(1000, 1500);
+ 	usleep_range(1000, 1500);
 +	if (pcie->force_gen1) {
 +		writel_relaxed((readl_relaxed(
 +			pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1),
 +			pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
 +	}
-
+ 
-
+ 
-	/* Set the Max TLP size to 2K, instead of using default of 4K */
+ 	/* Set the Max TLP size to 2K, instead of using default of 4K */
-@@ -1382,6 +1390,8 @@
+@@ -1382,6 +1390,8 @@ static int qcom_pcie_probe(struct platfo
-	struct dw_pcie *pci;
+ 	struct dw_pcie *pci;
-	struct qcom_pcie *pcie;
+ 	struct qcom_pcie *pcie;
-	int ret;
+ 	int ret;
 +	uint32_t force_gen1 = 0;
 +	struct device_node *np = pdev->dev.of_node;
-
+ 
-	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+ 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
-	if (!pcie)
+ 	if (!pcie)
-@@ -1403,6 +1413,9 @@
+@@ -1403,6 +1413,9 @@ static int qcom_pcie_probe(struct platfo
-	if (IS_ERR(pcie->reset))
+ 	if (IS_ERR(pcie->reset))
-		return PTR_ERR(pcie->reset);
+ 		return PTR_ERR(pcie->reset);
-
+ 
 +	of_property_read_u32(np, "force_gen1", &force_gen1);
 +	pcie->force_gen1 = force_gen1;
 +
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
+ 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
-	pcie->parf = devm_ioremap_resource(dev, res);
+ 	pcie->parf = devm_ioremap_resource(dev, res);
-	if (IS_ERR(pcie->parf))
+ 	if (IS_ERR(pcie->parf))

target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch

@@ -17,9 +17,9 @@ Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
 --- a/drivers/pci/dwc/pcie-qcom.c
 +++ b/drivers/pci/dwc/pcie-qcom.c
 @@ -131,6 +131,14 @@
-
+ 
  #define PCIE20_LNK_CONTROL2_LINK_STATUS2        0xA0
-
+ 
 +#define __set(v, a, b)	(((v) << (b)) & GENMASK(a, b))
 +#define __mask(a, b)	(((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1))
 +#define PCIE20_DEV_CAS			0x78
@@ -29,12 +29,12 @@ Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
 +#define PCIE20_MPS(x)			__set(x, 7, 5)
 +
  struct qcom_pcie_resources_2_1_0 {
-	struct clk *iface_clk;
+ 	struct clk *iface_clk;
-	struct clk *core_clk;
+ 	struct clk *core_clk;
-@@ -1472,6 +1480,35 @@
+@@ -1472,6 +1480,35 @@ static int qcom_pcie_probe(struct platfo
-	return 0;
+ 	return 0;
  }
-
+ 
 +static void qcom_pcie_fixup_final(struct pci_dev *dev)
 +{
 +	int cap, err;
@@ -65,5 +65,5 @@ Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
 +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final);
 +
  static const struct of_device_id qcom_pcie_match[] = {
-	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
+ 	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
-	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
+ 	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },

target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch

@@ -38,54 +38,54 @@ Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
 
 --- a/drivers/pci/dwc/pcie-qcom.c
 +++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -407,6 +407,7 @@
+@@ -407,6 +407,7 @@ static void qcom_pcie_deinit_2_1_0(struc
  {
-	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+ 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-
+ 
 +	clk_disable_unprepare(res->phy_clk);
-	reset_control_assert(res->pci_reset);
+ 	reset_control_assert(res->pci_reset);
-	reset_control_assert(res->axi_reset);
+ 	reset_control_assert(res->axi_reset);
-	reset_control_assert(res->ahb_reset);
+ 	reset_control_assert(res->ahb_reset);
-@@ -415,7 +415,6 @@
+@@ -415,7 +416,6 @@ static void qcom_pcie_deinit_2_1_0(struc
-	reset_control_assert(res->ext_reset);
+ 	reset_control_assert(res->ext_reset);
-	clk_disable_unprepare(res->iface_clk);
+ 	clk_disable_unprepare(res->iface_clk);
-	clk_disable_unprepare(res->core_clk);
+ 	clk_disable_unprepare(res->core_clk);
 -	clk_disable_unprepare(res->phy_clk);
-	clk_disable_unprepare(res->aux_clk);
+ 	clk_disable_unprepare(res->aux_clk);
-	clk_disable_unprepare(res->ref_clk);
+ 	clk_disable_unprepare(res->ref_clk);
-	regulator_disable(res->vdda);
+ 	regulator_disable(res->vdda);
-@@ -472,12 +472,6 @@
+@@ -472,12 +472,6 @@ static int qcom_pcie_init_2_1_0(struct q
-		goto err_clk_core;
+ 		goto err_clk_core;
-	}
+ 	}
-
+ 
 -	ret = clk_prepare_enable(res->phy_clk);
 -	if (ret) {
 -		dev_err(dev, "cannot prepare/enable phy clock\n");
 -		goto err_clk_phy;
 -	}
 -
-	ret = clk_prepare_enable(res->aux_clk);
+ 	ret = clk_prepare_enable(res->aux_clk);
-	if (ret) {
+ 	if (ret) {
-		dev_err(dev, "cannot prepare/enable aux clock\n");
+ 		dev_err(dev, "cannot prepare/enable aux clock\n");
-@@ -541,6 +535,12 @@
+@@ -541,6 +535,12 @@ static int qcom_pcie_init_2_1_0(struct q
-		return ret;
+ 		return ret;
-	}
+ 	}
-
+ 
 +	ret = clk_prepare_enable(res->phy_clk);
 +	if (ret) {
 +		dev_err(dev, "cannot prepare/enable phy clock\n");
 +		goto err_deassert_ahb;
 +	}
 +
-	/* wait for clock acquisition */
+ 	/* wait for clock acquisition */
-	usleep_range(1000, 1500);
+ 	usleep_range(1000, 1500);
-	if (pcie->force_gen1) {
+ 	if (pcie->force_gen1) {
-@@ -566,8 +566,6 @@
+@@ -566,8 +566,6 @@ err_deassert_ahb:
  err_clk_ref:
-	clk_disable_unprepare(res->aux_clk);
+ 	clk_disable_unprepare(res->aux_clk);
  err_clk_aux:
 -	clk_disable_unprepare(res->phy_clk);
 -err_clk_phy:
-	clk_disable_unprepare(res->core_clk);
+ 	clk_disable_unprepare(res->core_clk);
  err_clk_core:
-	clk_disable_unprepare(res->iface_clk);
+ 	clk_disable_unprepare(res->iface_clk);

target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch

@@ -14,12 +14,12 @@ Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
 
 --- a/drivers/pci/dwc/pcie-qcom.c
 +++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -408,7 +408,7 @@
+@@ -408,7 +408,7 @@ static void qcom_pcie_deinit_2_1_0(struc
-	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+ 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-
+ 
-	clk_disable_unprepare(res->phy_clk);
+ 	clk_disable_unprepare(res->phy_clk);
 -	reset_control_assert(res->pci_reset);
 +	reset_control_assert(res->phy_reset);
-	reset_control_assert(res->axi_reset);
+ 	reset_control_assert(res->axi_reset);
-	reset_control_assert(res->ahb_reset);
+ 	reset_control_assert(res->ahb_reset);
-	reset_control_assert(res->por_reset);
+ 	reset_control_assert(res->por_reset);

target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch

@@ -1,12 +1,12 @@
 --- a/drivers/firmware/qcom_scm.c
 +++ b/drivers/firmware/qcom_scm.c
-@@ -422,6 +422,9 @@
+@@ -422,6 +422,9 @@ static const struct of_device_id qcom_sc
-	{ .compatible = "qcom,scm-msm8996",
+ 	{ .compatible = "qcom,scm-msm8996",
-	  .data = NULL, /* no clocks */
+ 	  .data = NULL, /* no clocks */
-	},
+ 	},
 +	{ .compatible = "qcom,scm-ipq806x",
 +	  .data = NULL, /* no clocks */
 +	},
-	{ .compatible = "qcom,scm",
+ 	{ .compatible = "qcom,scm",
-	  .data = (void *)(SCM_HAS_CORE_CLK
+ 	  .data = (void *)(SCM_HAS_CORE_CLK
-			   | SCM_HAS_IFACE_CLK
+ 			   | SCM_HAS_IFACE_CLK

target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch

@@ -21,10 +21,10 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
 
 --- a/drivers/firmware/qcom_scm-32.c
 +++ b/drivers/firmware/qcom_scm-32.c
-@@ -561,6 +561,24 @@
+@@ -561,6 +561,24 @@ int __qcom_scm_pas_mss_reset(struct devi
-	return ret ? : le32_to_cpu(out);
+ 	return ret ? : le32_to_cpu(out);
  }
-
+ 
 +int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
 +{
 +	s32 ret;
@@ -45,13 +45,13 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
 +
  int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
  {
-	struct {
+ 	struct {
 --- a/drivers/firmware/qcom_scm-64.c
 +++ b/drivers/firmware/qcom_scm-64.c
-@@ -366,6 +366,16 @@
+@@ -366,6 +366,16 @@ int __qcom_scm_pas_mss_reset(struct devi
-	return ret ? : res.a1;
+ 	return ret ? : res.a1;
  }
-
+ 
 +int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
 +{
 +	return -ENOTSUPP;
@@ -64,11 +64,11 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
 +
  int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
  {
-	struct qcom_scm_desc desc = {0};
+ 	struct qcom_scm_desc desc = {0};
 --- a/drivers/firmware/qcom_scm.c
 +++ b/drivers/firmware/qcom_scm.c
 @@ -470,3 +470,16 @@ static int __init qcom_scm_init(void)
-	return platform_driver_register(&qcom_scm_driver);
+ 	return platform_driver_register(&qcom_scm_driver);
  }
  subsys_initcall(qcom_scm_init);
 +
@@ -89,7 +89,7 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
 @@ -58,6 +58,13 @@ extern int  __qcom_scm_pas_auth_and_rese
  extern int  __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
  extern int  __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
-
+ 
 +#define SCM_IO_READ	1
 +#define SCM_IO_WRITE	2
 +#define SCM_SVC_IO_ACCESS	0x5
@@ -112,23 +112,23 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
  #include "../core.h"
  #include "../pinconf.h"
  #include "pinctrl-msm.h"
-@@ -638,6 +639,9 @@ static int msm_gpio_irq_set_type(struct
+@@ -638,6 +639,9 @@ static void msm_gpio_irq_ack(struct irq_
-	const struct msm_pingroup *g;
+ 	const struct msm_pingroup *g;
-	unsigned long flags;
+ 	unsigned long flags;
-	u32 val;
+ 	u32 val;
 +	u32 addr;
 +	int ret;
 +	const __be32 *reg;
-
+ 
-	g = &pctrl->soc->groups[d->hwirq];
+ 	g = &pctrl->soc->groups[d->hwirq];
-
+ 
 @@ -676,11 +680,30 @@ static int msm_gpio_irq_set_type(struct
-	else
+ 	else
-		clear_bit(d->hwirq, pctrl->dual_edge_irqs);
+ 		clear_bit(d->hwirq, pctrl->dual_edge_irqs);
-
+ 
 +	int ret = of_device_is_compatible(pctrl->dev->of_node,
 +					"qcom,ipq8064-pinctrl");
-	/* Route interrupts to application cpu */
+ 	/* Route interrupts to application cpu */
 -	val = readl(pctrl->regs + g->intr_target_reg);
 -	val &= ~(7 << g->intr_target_bit);
 -	val |= g->intr_target_kpss_val << g->intr_target_bit;
@@ -154,17 +154,17 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
 +				pr_err("\n Routing interrupts to Apps proc failed");
 +		}
 +	}
-
+ 
-	/* Update configuration for gpio.
+ 	/* Update configuration for gpio.
-	 * RAW_STATUS_EN is left on for all gpio irqs. Due to the
+ 	 * RAW_STATUS_EN is left on for all gpio irqs. Due to the
 @@ -954,4 +977,3 @@ int msm_pinctrl_remove(struct platform_d
-	return 0;
+ 	return 0;
  }
  EXPORT_SYMBOL(msm_pinctrl_remove);
 -
 --- a/include/linux/qcom_scm.h
 +++ b/include/linux/qcom_scm.h
-@@ -43,6 +43,8 @@
+@@ -43,6 +43,8 @@ extern int qcom_scm_set_remote_state(u32
  extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
  extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
  extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
@@ -173,7 +173,7 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
  #else
  static inline
  int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
-@@ -73,5 +75,7 @@
+@@ -73,5 +75,7 @@ qcom_scm_set_remote_state(u32 state,u32
  static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
  static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
  static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }

target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch

@@ -26,19 +26,19 @@ Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
  #include <linux/of.h>
  #include <linux/of_platform.h>
  #include <linux/pm_runtime.h>
-@@ -33,6 +34,8 @@
+@@ -33,6 +34,8 @@ struct dwc3_of_simple {
-	struct device		*dev;
+ 	struct device		*dev;
-	struct clk		**clks;
+ 	struct clk		**clks;
-	int			num_clocks;
+ 	int			num_clocks;
 +	struct reset_control	*mstr_rst_30_0;
 +	struct reset_control	*mstr_rst_30_1;
  };
-
+ 
  static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
-@@ -102,6 +105,20 @@
+@@ -102,6 +105,20 @@ static int dwc3_of_simple_probe(struct p
-	if (ret)
+ 	if (ret)
-		return ret;
+ 		return ret;
-
+ 
 +	simple->mstr_rst_30_0 = devm_reset_control_get(dev, "usb30_0_mstr_rst");
 +
 +	if (!IS_ERR(simple->mstr_rst_30_0))
@@ -53,19 +53,19 @@ Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
 +	else
 +		dev_dbg(simple->dev, "cannot get handle for USB PHY 1 master reset control\n");
 +
-	ret = of_platform_populate(np, NULL, NULL, dev);
+ 	ret = of_platform_populate(np, NULL, NULL, dev);
-	if (ret) {
+ 	if (ret) {
-		for (i = 0; i < simple->num_clocks; i++) {
+ 		for (i = 0; i < simple->num_clocks; i++) {
-@@ -130,6 +147,12 @@
+@@ -130,6 +147,12 @@ static int dwc3_of_simple_remove(struct
-		clk_put(simple->clks[i]);
+ 		clk_put(simple->clks[i]);
-	}
+ 	}
-
+ 
 +	if (!IS_ERR(simple->mstr_rst_30_0))
 +		reset_control_assert(simple->mstr_rst_30_0);
 +
 +	if (!IS_ERR(simple->mstr_rst_30_1))
 +		reset_control_assert(simple->mstr_rst_30_1);
 +
-	of_platform_depopulate(dev);
+ 	of_platform_depopulate(dev);
-
+ 
-	pm_runtime_put_sync(dev);
+ 	pm_runtime_put_sync(dev);

target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch

@@ -11,12 +11,12 @@ the ubi volume created by the other.
 ---
 --- a/drivers/mtd/spi-nor/spi-nor.c
 +++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1023,7 +1023,7 @@
+@@ -1023,7 +1023,7 @@ static const struct flash_info spi_nor_i
-	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+ 	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
-	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
-	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
 -	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 +	{ "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SECT_4K) },
-	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
+ 	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
-	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+ 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
-	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },

target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch

@@ -7,20 +7,20 @@ Subject: BUS: add MSM_BUS
  obj-$(CONFIG_MIPS_CDMM)		+= mips_cdmm.o
  obj-$(CONFIG_MVEBU_MBUS) 	+= mvebu-mbus.o
 +obj-$(CONFIG_BUS_TOPOLOGY_ADHOC)+= msm_bus/
-
+ 
  # Interconnect bus driver for OMAP SoCs.
  obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
 --- a/drivers/bus/Kconfig
 +++ b/drivers/bus/Kconfig
 @@ -93,6 +93,8 @@ config MVEBU_MBUS
-	  Driver needed for the MBus configuration on Marvell EBU SoCs
+ 	  Driver needed for the MBus configuration on Marvell EBU SoCs
-	  (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
+ 	  (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
-
+ 
 +source "drivers/bus/msm_bus/Kconfig"
 +
  config OMAP_INTERCONNECT
-	tristate "OMAP INTERCONNECT DRIVER"
+ 	tristate "OMAP INTERCONNECT DRIVER"
-	depends on ARCH_OMAP2PLUS
+ 	depends on ARCH_OMAP2PLUS
 --- /dev/null
 +++ b/include/dt-bindings/msm/msm-bus-ids.h
 @@ -0,0 +1,869 @@

target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch

@@ -10,9 +10,9 @@ Subject: SoC: add qualcomm syscon
 --- a/drivers/soc/qcom/Kconfig
 +++ b/drivers/soc/qcom/Kconfig
 @@ -78,6 +78,13 @@ config QCOM_SMSM
-	  Say yes here to support the Qualcomm Shared Memory State Machine.
+ 	  Say yes here to support the Qualcomm Shared Memory State Machine.
-	  The state machine is represented by bits in shared memory.
+ 	  The state machine is represented by bits in shared memory.
-
+ 
 +config QCOM_TCSR
 +	tristate "QCOM Top Control and Status Registers"
 +	depends on ARCH_QCOM
@@ -21,8 +21,8 @@ Subject: SoC: add qualcomm syscon
 +	  functions for various peripherals.
 +
  config QCOM_WCNSS_CTRL
-	tristate "Qualcomm WCNSS control driver"
+ 	tristate "Qualcomm WCNSS control driver"
-	depends on ARCH_QCOM
+ 	depends on ARCH_QCOM
 --- /dev/null
 +++ b/drivers/soc/qcom/qcom_tcsr.c
 @@ -0,0 +1,98 @@

target/linux/lantiq/patches-4.14/0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch

@@ -18,7 +18,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
 
 --- a/drivers/soc/lantiq/gphy.c
 +++ b/drivers/soc/lantiq/gphy.c
-@@ -56,6 +56,7 @@ static const struct xway_gphy_match_data
+@@ -55,6 +55,7 @@ static const struct xway_gphy_match_data
  };
  
  static const struct of_device_id xway_gphy_match[] = {
@@ -26,7 +26,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	{ .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data },
  	{ .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data },
  	{ .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data },
-@@ -130,6 +131,16 @@ static int xway_gphy_of_probe(struct pla
+@@ -111,6 +112,16 @@ static int xway_gphy_of_probe(struct pla
  
  	gphy_fw_name_cfg = of_device_get_match_data(dev);
  

target/linux/lantiq/patches-4.14/0025-MIPS-lantiq-gphy-Remove-reboot-remove-reset-asserts.patch

@@ -1,86 +0,0 @@
-From ae14aba7fc748b2da282b59a2f516a311ed1f6eb Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Tue, 27 Mar 2018 23:15:07 +0200
-Subject: [PATCH] MIPS: lantiq: gphy: Remove reboot/remove reset asserts
-
-While doing a global software reset, these bits are not cleared and let
-some bootloader fail to initialise the GPHYs. The bootloader don't expect
-these bits to be set, as they aren't during power on.
-
-The asserts were a workaround for a wrong syscon-reboot mask. With a mask
-set which includes the GPHY resets of the first reset register, the
-resets of the second reset register arn't required any more.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- drivers/soc/lantiq/gphy.c | 34 ----------------------------------
- 1 file changed, 34 deletions(-)
-
---- a/drivers/soc/lantiq/gphy.c
-+++ b/drivers/soc/lantiq/gphy.c
-@@ -30,7 +30,6 @@ struct xway_gphy_priv {
- 	struct clk *gphy_clk_gate;
- 	struct reset_control *gphy_reset;
- 	struct reset_control *gphy_reset2;
--	struct notifier_block gphy_reboot_nb;
- 	void __iomem *membase;
- 	char *fw_name;
- };
-@@ -65,24 +64,6 @@ static const struct of_device_id xway_gp
- };
- MODULE_DEVICE_TABLE(of, xway_gphy_match);
- 
--static struct xway_gphy_priv *to_xway_gphy_priv(struct notifier_block *nb)
--{
--	return container_of(nb, struct xway_gphy_priv, gphy_reboot_nb);
--}
--
--static int xway_gphy_reboot_notify(struct notifier_block *reboot_nb,
--				   unsigned long code, void *unused)
--{
--	struct xway_gphy_priv *priv = to_xway_gphy_priv(reboot_nb);
--
--	if (priv) {
--		reset_control_assert(priv->gphy_reset);
--		reset_control_assert(priv->gphy_reset2);
--	}
--
--	return NOTIFY_DONE;
--}
--
- static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv,
- 			  dma_addr_t *dev_addr)
- {
-@@ -216,14 +197,6 @@ static int xway_gphy_probe(struct platfo
- 	reset_control_deassert(priv->gphy_reset);
- 	reset_control_deassert(priv->gphy_reset2);
- 
--	/* assert the gphy reset because it can hang after a reboot: */
--	priv->gphy_reboot_nb.notifier_call = xway_gphy_reboot_notify;
--	priv->gphy_reboot_nb.priority = -1;
--
--	ret = register_reboot_notifier(&priv->gphy_reboot_nb);
--	if (ret)
--		dev_warn(dev, "Failed to register reboot notifier\n");
--
- 	platform_set_drvdata(pdev, priv);
- 
- 	return ret;
-@@ -235,17 +208,10 @@ static int xway_gphy_remove(struct platf
- 	struct xway_gphy_priv *priv = platform_get_drvdata(pdev);
- 	int ret;
- 
--	reset_control_assert(priv->gphy_reset);
--	reset_control_assert(priv->gphy_reset2);
--
- 	iowrite32be(0, priv->membase);
- 
- 	clk_disable_unprepare(priv->gphy_clk_gate);
- 
--	ret = unregister_reboot_notifier(&priv->gphy_reboot_nb);
--	if (ret)
--		dev_warn(dev, "Failed to unregister reboot notifier\n");
--
- 	return 0;
- }
- 

target/linux/mediatek/patches-4.14/0045-net-dsa-mediatek-turn-into-platform-driver.patch

@@ -57,9 +57,9 @@ Signed-off-by: John Crispin <john@phrozen.org>
  }
  
  static const struct of_device_id mt7530_of_match[] = {
-@@ -1135,16 +1142,16 @@ static const struct of_device_id mt7530_
+@@ -1136,16 +1143,16 @@ static const struct of_device_id mt7530_
- 	{ /* sentinel */ },
  };
+ MODULE_DEVICE_TABLE(of, mt7530_of_match);
  
 -static struct mdio_driver mt7530_mdio_driver = {
 +static struct platform_driver mtk_mt7530_driver = {

target/linux/mvebu/patches-4.14/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch

@@ -28,7 +28,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
 
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -1948,6 +1948,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
+@@ -1938,6 +1938,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
  	  The command-line arguments provided by the boot loader will be
  	  appended to the the device tree bootargs property.
  
@@ -48,7 +48,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
  config CMDLINE
 --- a/arch/arm/boot/compressed/atags_to_fdt.c
 +++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -3,6 +3,8 @@
+@@ -4,6 +4,8 @@
  
  #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
  #define do_extend_cmdline 1
@@ -57,7 +57,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
  #else
  #define do_extend_cmdline 0
  #endif
-@@ -66,6 +68,65 @@ static uint32_t get_cell_size(const void
+@@ -67,6 +69,65 @@ static uint32_t get_cell_size(const void
  	return cell_size;
  }
  
@@ -123,7 +123,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
  static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
  {
  	char cmdline[COMMAND_LINE_SIZE];
-@@ -85,12 +140,21 @@ static void merge_fdt_bootargs(void *fdt
+@@ -86,12 +147,21 @@ static void merge_fdt_bootargs(void *fdt
  
  	/* and append the ATAG_CMDLINE */
  	if (fdt_cmdline) {
@@ -145,7 +145,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
  	}
  	*ptr = '\0';
  
-@@ -147,7 +211,9 @@ int atags_to_fdt(void *atag_list, void *
+@@ -148,7 +218,9 @@ int atags_to_fdt(void *atag_list, void *
  			else
  				setprop_string(fdt, "/chosen", "bootargs",
  					       atag->u.cmdline.cmdline);
@@ -156,7 +156,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
  			if (memcount >= sizeof(mem_reg_property)/4)
  				continue;
  			if (!atag->u.mem.size)
-@@ -186,6 +252,10 @@ int atags_to_fdt(void *atag_list, void *
+@@ -187,6 +259,10 @@ int atags_to_fdt(void *atag_list, void *
  		setprop(fdt, "/memory", "reg", mem_reg_property,
  			4 * memcount * memsize);
  	}
@@ -169,7 +169,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
  }
 --- a/init/main.c
 +++ b/init/main.c
-@@ -89,6 +89,10 @@
+@@ -95,6 +95,10 @@
  #include <asm/sections.h>
  #include <asm/cacheflush.h>
  
@@ -180,7 +180,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
  static int kernel_init(void *);
  
  extern void init_IRQ(void);
-@@ -540,6 +544,18 @@ asmlinkage __visible void __init start_k
+@@ -574,6 +578,18 @@ asmlinkage __visible void __init start_k
  	page_alloc_init();
  
  	pr_notice("Kernel command line: %s\n", boot_command_line);

target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch

@@ -9,7 +9,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 ---
 --- a/drivers/net/ethernet/marvell/mvneta.c
 +++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -3961,6 +3961,15 @@ static int mvneta_ethtool_set_wol(struct
+@@ -3962,6 +3962,15 @@ static int mvneta_ethtool_set_wol(struct
  	return ret;
  }
  
@@ -25,7 +25,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  static const struct net_device_ops mvneta_netdev_ops = {
  	.ndo_open            = mvneta_open,
  	.ndo_stop            = mvneta_stop,
-@@ -3971,6 +3980,7 @@ static const struct net_device_ops mvnet
+@@ -3972,6 +3981,7 @@ static const struct net_device_ops mvnet
  	.ndo_fix_features    = mvneta_fix_features,
  	.ndo_get_stats64     = mvneta_get_stats64,
  	.ndo_do_ioctl        = mvneta_ioctl,

target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch

@@ -132,7 +132,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
  
  	u32 indir[MVNETA_RSS_LU_TABLE_SIZE];
-@@ -1214,10 +1233,6 @@ static void mvneta_port_disable(struct m
+@@ -1215,10 +1234,6 @@ static void mvneta_port_disable(struct m
  	val &= ~MVNETA_GMAC0_PORT_ENABLE;
  	mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
  
@@ -143,7 +143,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	udelay(200);
  }
  
-@@ -1277,44 +1292,6 @@ static void mvneta_set_other_mcast_table
+@@ -1278,44 +1293,6 @@ static void mvneta_set_other_mcast_table
  		mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
  }
  
@@ -188,7 +188,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  static void mvneta_percpu_unmask_interrupt(void *arg)
  {
  	struct mvneta_port *pp = arg;
-@@ -1467,7 +1444,6 @@ static void mvneta_defaults_set(struct m
+@@ -1468,7 +1445,6 @@ static void mvneta_defaults_set(struct m
  	val &= ~MVNETA_PHY_POLLING_ENABLE;
  	mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
  
@@ -196,7 +196,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	mvneta_set_ucast_table(pp, -1);
  	mvneta_set_special_mcast_table(pp, -1);
  	mvneta_set_other_mcast_table(pp, -1);
-@@ -2692,26 +2668,11 @@ static irqreturn_t mvneta_percpu_isr(int
+@@ -2693,26 +2669,11 @@ static irqreturn_t mvneta_percpu_isr(int
  	return IRQ_HANDLED;
  }
  
@@ -225,7 +225,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  }
  
  /* NAPI handler
-@@ -2727,7 +2688,6 @@ static int mvneta_poll(struct napi_struc
+@@ -2728,7 +2689,6 @@ static int mvneta_poll(struct napi_struc
  	u32 cause_rx_tx;
  	int rx_queue;
  	struct mvneta_port *pp = netdev_priv(napi->dev);
@@ -233,7 +233,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
  
  	if (!netif_running(pp->dev)) {
-@@ -2741,12 +2701,11 @@ static int mvneta_poll(struct napi_struc
+@@ -2742,12 +2702,11 @@ static int mvneta_poll(struct napi_struc
  		u32 cause_misc = mvreg_read(pp, MVNETA_INTR_MISC_CAUSE);
  
  		mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
@@ -251,7 +251,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	}
  
  	/* Release Tx descriptors */
-@@ -3060,7 +3019,6 @@ static int mvneta_setup_txqs(struct mvne
+@@ -3061,7 +3020,6 @@ static int mvneta_setup_txqs(struct mvne
  static void mvneta_start_dev(struct mvneta_port *pp)
  {
  	int cpu;
@@ -259,7 +259,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  
  	mvneta_max_rx_size_set(pp, pp->pkt_size);
  	mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
-@@ -3088,16 +3046,15 @@ static void mvneta_start_dev(struct mvne
+@@ -3089,16 +3047,15 @@ static void mvneta_start_dev(struct mvne
  		    MVNETA_CAUSE_LINK_CHANGE |
  		    MVNETA_CAUSE_PSC_SYNC_CHANGE);
  
@@ -278,7 +278,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  
  	if (!pp->neta_armada3700) {
  		for_each_online_cpu(cpu) {
-@@ -3251,103 +3208,232 @@ static int mvneta_set_mac_addr(struct ne
+@@ -3252,103 +3209,232 @@ static int mvneta_set_mac_addr(struct ne
  	return 0;
  }
  
@@ -585,7 +585,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  }
  
  /* Electing a CPU must be done in an atomic way: it should be done
-@@ -3626,10 +3712,9 @@ static int mvneta_stop(struct net_device
+@@ -3627,10 +3713,9 @@ static int mvneta_stop(struct net_device
  
  static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
  {
@@ -598,7 +598,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  }
  
  /* Ethtool methods */
-@@ -3640,44 +3725,25 @@ mvneta_ethtool_set_link_ksettings(struct
+@@ -3641,44 +3726,25 @@ mvneta_ethtool_set_link_ksettings(struct
  				  const struct ethtool_link_ksettings *cmd)
  {
  	struct mvneta_port *pp = netdev_priv(ndev);
@@ -657,7 +657,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  }
  
  /* Set interrupt coalescing for ethtools */
-@@ -3769,6 +3835,22 @@ static int mvneta_ethtool_set_ringparam(
+@@ -3770,6 +3836,22 @@ static int mvneta_ethtool_set_ringparam(
  	return 0;
  }
  
@@ -680,7 +680,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset,
  				       u8 *data)
  {
-@@ -3785,26 +3867,35 @@ static void mvneta_ethtool_update_stats(
+@@ -3786,26 +3868,35 @@ static void mvneta_ethtool_update_stats(
  {
  	const struct mvneta_statistic *s;
  	void __iomem *base = pp->base;
@@ -721,7 +721,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	}
  }
  
-@@ -3939,28 +4030,65 @@ static int mvneta_ethtool_get_rxfh(struc
+@@ -3940,28 +4031,65 @@ static int mvneta_ethtool_get_rxfh(struc
  static void mvneta_ethtool_get_wol(struct net_device *dev,
  				   struct ethtool_wolinfo *wol)
  {
@@ -795,7 +795,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
  			       void *accel_priv,
  			       select_queue_fallback_t fallback)
-@@ -3984,13 +4112,15 @@ static const struct net_device_ops mvnet
+@@ -3985,13 +4113,15 @@ static const struct net_device_ops mvnet
  };
  
  static const struct ethtool_ops mvneta_eth_tool_ops = {
@@ -812,7 +812,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	.get_strings	= mvneta_ethtool_get_strings,
  	.get_ethtool_stats = mvneta_ethtool_get_stats,
  	.get_sset_count	= mvneta_ethtool_get_sset_count,
-@@ -3998,10 +4128,12 @@ static const struct ethtool_ops mvneta_e
+@@ -3999,10 +4129,12 @@ static const struct ethtool_ops mvneta_e
  	.get_rxnfc	= mvneta_ethtool_get_rxnfc,
  	.get_rxfh	= mvneta_ethtool_get_rxfh,
  	.set_rxfh	= mvneta_ethtool_set_rxfh,
@@ -826,7 +826,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  };
  
  /* Initialize hw */
-@@ -4146,14 +4278,13 @@ static int mvneta_probe(struct platform_
+@@ -4147,14 +4279,13 @@ static int mvneta_probe(struct platform_
  {
  	struct resource *res;
  	struct device_node *dn = pdev->dev.of_node;
@@ -842,7 +842,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	int tx_csum_limit;
  	int phy_mode;
  	int err;
-@@ -4169,31 +4300,11 @@ static int mvneta_probe(struct platform_
+@@ -4170,31 +4301,11 @@ static int mvneta_probe(struct platform_
  		goto err_free_netdev;
  	}
  
@@ -875,7 +875,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	}
  
  	dev->tx_queue_len = MVNETA_MAX_TXD;
-@@ -4204,12 +4315,7 @@ static int mvneta_probe(struct platform_
+@@ -4205,12 +4316,7 @@ static int mvneta_probe(struct platform_
  
  	pp = netdev_priv(dev);
  	spin_lock_init(&pp->lock);
@@ -889,7 +889,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  
  	pp->rxq_def = rxq_def;
  
-@@ -4231,7 +4337,7 @@ static int mvneta_probe(struct platform_
+@@ -4232,7 +4338,7 @@ static int mvneta_probe(struct platform_
  		pp->clk = devm_clk_get(&pdev->dev, NULL);
  	if (IS_ERR(pp->clk)) {
  		err = PTR_ERR(pp->clk);
@@ -898,7 +898,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	}
  
  	clk_prepare_enable(pp->clk);
-@@ -4357,6 +4463,14 @@ static int mvneta_probe(struct platform_
+@@ -4358,6 +4464,14 @@ static int mvneta_probe(struct platform_
  	/* 9676 == 9700 - 20 and rounding to 8 */
  	dev->max_mtu = 9676;
  
@@ -913,7 +913,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	err = register_netdev(dev);
  	if (err < 0) {
  		dev_err(&pdev->dev, "failed to register\n");
-@@ -4368,14 +4482,6 @@ static int mvneta_probe(struct platform_
+@@ -4369,14 +4483,6 @@ static int mvneta_probe(struct platform_
  
  	platform_set_drvdata(pdev, pp->dev);
  
@@ -928,7 +928,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	return 0;
  
  err_netdev:
-@@ -4386,16 +4492,14 @@ err_netdev:
+@@ -4387,16 +4493,14 @@ err_netdev:
  				       1 << pp->id);
  	}
  err_free_stats:
@@ -947,7 +947,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  err_free_irq:
  	irq_dispose_mapping(dev->irq);
  err_free_netdev:
-@@ -4407,7 +4511,6 @@ err_free_netdev:
+@@ -4408,7 +4512,6 @@ err_free_netdev:
  static int mvneta_remove(struct platform_device *pdev)
  {
  	struct net_device  *dev = platform_get_drvdata(pdev);
@@ -955,7 +955,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	struct mvneta_port *pp = netdev_priv(dev);
  
  	unregister_netdev(dev);
-@@ -4415,10 +4518,8 @@ static int mvneta_remove(struct platform
+@@ -4416,10 +4519,8 @@ static int mvneta_remove(struct platform
  	clk_disable_unprepare(pp->clk);
  	free_percpu(pp->ports);
  	free_percpu(pp->stats);
@@ -967,7 +967,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  	free_netdev(dev);
  
  	if (pp->bm_priv) {
-@@ -4470,9 +4571,6 @@ static int mvneta_resume(struct device *
+@@ -4471,9 +4572,6 @@ static int mvneta_resume(struct device *
  		return err;
  	}
  

target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch

@@ -18,7 +18,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  	struct device_node *dn;
  	unsigned int tx_csum_limit;
  	struct phylink *phylink;
-@@ -4315,6 +4316,7 @@ static int mvneta_probe(struct platform_
+@@ -4316,6 +4317,7 @@ static int mvneta_probe(struct platform_
  
  	pp = netdev_priv(dev);
  	spin_lock_init(&pp->lock);

target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch

@@ -14,7 +14,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
 
 --- a/drivers/net/ethernet/marvell/mvneta.c
 +++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2704,8 +2704,7 @@ static int mvneta_poll(struct napi_struc
+@@ -2705,8 +2705,7 @@ static int mvneta_poll(struct napi_struc
  		mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
  
  		if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE |
@@ -24,7 +24,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  			mvneta_link_change(pp);
  	}
  
-@@ -3044,8 +3043,7 @@ static void mvneta_start_dev(struct mvne
+@@ -3045,8 +3044,7 @@ static void mvneta_start_dev(struct mvne
  
  	mvreg_write(pp, MVNETA_INTR_MISC_MASK,
  		    MVNETA_CAUSE_PHY_STATUS_CHANGE |
@@ -34,7 +34,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  
  	phylink_start(pp->phylink);
  	netif_tx_start_all_queues(pp->dev);
-@@ -3542,8 +3540,7 @@ static int mvneta_cpu_online(unsigned in
+@@ -3543,8 +3541,7 @@ static int mvneta_cpu_online(unsigned in
  	on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
  	mvreg_write(pp, MVNETA_INTR_MISC_MASK,
  		    MVNETA_CAUSE_PHY_STATUS_CHANGE |
@@ -44,7 +44,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  	netif_tx_start_all_queues(pp->dev);
  	spin_unlock(&pp->lock);
  	return 0;
-@@ -3584,8 +3581,7 @@ static int mvneta_cpu_dead(unsigned int
+@@ -3585,8 +3582,7 @@ static int mvneta_cpu_dead(unsigned int
  	on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
  	mvreg_write(pp, MVNETA_INTR_MISC_MASK,
  		    MVNETA_CAUSE_PHY_STATUS_CHANGE |

target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch

@@ -10,7 +10,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
 
 --- a/drivers/net/ethernet/marvell/mvneta.c
 +++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4045,6 +4045,22 @@ static int mvneta_ethtool_set_wol(struct
+@@ -4046,6 +4046,22 @@ static int mvneta_ethtool_set_wol(struct
  	return ret;
  }
  
@@ -33,7 +33,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  static int mvneta_ethtool_get_eee(struct net_device *dev,
  				  struct ethtool_eee *eee)
  {
-@@ -4129,6 +4145,8 @@ static const struct ethtool_ops mvneta_e
+@@ -4130,6 +4146,8 @@ static const struct ethtool_ops mvneta_e
  	.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
  	.get_wol        = mvneta_ethtool_get_wol,
  	.set_wol        = mvneta_ethtool_set_wol,

target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch

@@ -15,7 +15,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
 
 --- a/drivers/net/ethernet/marvell/mvneta.c
 +++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4045,22 +4045,6 @@ static int mvneta_ethtool_set_wol(struct
+@@ -4046,22 +4046,6 @@ static int mvneta_ethtool_set_wol(struct
  	return ret;
  }
  
@@ -38,7 +38,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  static int mvneta_ethtool_get_eee(struct net_device *dev,
  				  struct ethtool_eee *eee)
  {
-@@ -4145,8 +4129,6 @@ static const struct ethtool_ops mvneta_e
+@@ -4146,8 +4130,6 @@ static const struct ethtool_ops mvneta_e
  	.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
  	.get_wol        = mvneta_ethtool_get_wol,
  	.set_wol        = mvneta_ethtool_set_wol,

target/linux/ramips/patches-4.14/0032-USB-dwc2-add-device_reset.patch

@@ -18,7 +18,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  #include <linux/usb/hcd.h>
  #include <linux/usb/ch11.h>
-@@ -5075,6 +5076,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
+@@ -5105,6 +5106,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
  
  	retval = -ENOMEM;