mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 05:38:00 +00:00
ramips: add support for Etisalat S3
Etisalat S3 is a wireless WiFi 5 router manufactured by Sercomm company.
Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 256 MiB
Flash: 128 MiB
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615E): a/n/ac, 4x4
Ethernet: 5x GbE (WAN, LAN1, LAN2, LAN3, LAN4)
USB ports: 1x USB3.0
Button: 2 buttons (Reset & WPS)
LEDs:
- 1x Status (RGB)
- 1x 2.4G (blue, hardware, mt76-phy0)
- 1x 5G (blue, hardware, mt76-phy1)
Power: 12 VDC, 1.5 A
Connector type: barrel
Bootloader: U-Boot
Installation
-----------------
1. Login to the router web interface under admin account
2. Navigate to Settings -> Configuration -> Save to Computer
3. Decode the configuration. For example, using cfgtool.py tool (see
related section):
cfgtool.py -u configurationBackup.cfg
4. Open configurationBackup.xml and find the following line:
<PARAMETER name="Password" type="string" value="<your router serial \
is here>" writable="1" encryption="1" password="1"/>
5. Insert the following line after and save:
<PARAMETER name="Enable" type="boolean" value="1" writable="1" encryption="0"/>
6. Encode the configuration. For example, using cfgtool.py tool:
cfgtool.py -p configurationBackup.xml
7. Upload the changed configuration (configurationBackup_changed.cfg) to
the router
8. Login to the router web interface (SuperUser:ETxxxxxxxxxx, where
ETxxxxxxxxxx is the serial number from the backplate label)
9. Navigate to Settings -> WAN -> Add static IP interface (e.g.
10.0.0.1/255.255.255.0)
10. Navigate to Settings -> Remote cotrol -> Add SSH, port 22,
10.0.0.0/255.255.255.0 and interface created before
11. Change IP of your client to 10.0.0.2/255.255.255.0 and connect the
ethernet cable to the WAN port of the router
12. Connect to the router using SSH shell under SuperUser account
13. Run in SSH shell:
sh
14. Make a mtd backup (optional, see related section)
15. Change bootflag to Sercomm1 and reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
reboot
16. Login to the router web interface under admin account
17. Remove dots from the OpenWrt factory image filename
18. Update firmware via web using OpenWrt factory image
Revert to stock
---------------
Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
mtd backup
----------
1. Set up a tftp server (e.g. tftpd64 for windows)
2. Connect to a router using SSH shell and run the following commands:
cd /tmp
for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \
tftp -l mtd$i -p 10.0.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done
tftp -l mtd.md5 -p 10.0.0.2
Recovery
--------
Use sercomm-recovery tool.
Link: https://github.com/danitool/sercomm-recovery
MAC Addresses
-------------
+-----+------------+---------+
| use | address | example |
+-----+------------+---------+
| LAN | label | *:50 |
| WAN | label + 11 | *:5b |
| 2g | label + 2 | *:52 |
| 5g | label + 3 | *:53 |
+-----+------------+---------+
The label MAC address was found in Factory 0x21000
cfgtool.py
----------
A tool for decoding and encoding Sercomm configs.
Link: https://github.com/r3d5ky/sercomm_cfg_unpacker
Co-authored-by: Karim Dehouche <karimdplay@gmail.com>
Co-authored-by: Maximilian Weinmann <x1@disroot.org>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
This commit is contained in:
Mikhail Zhilkin
Hauke Mehrtens
parent
a4339c5a21
commit
0ec8d991c2
@ -33,6 +33,7 @@ ampedwireless,ally-r1900k)
|
||||
;;
|
||||
beeline,smartbox-giga|\
|
||||
beeline,smartbox-turbo|\
|
||||
etisalat,s3|\
|
||||
rostelecom,rt-sf-1)
|
||||
ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000"
|
||||
;;
|
||||
|
||||
247
target/linux/ramips/dts/mt7621_etisalat_s3.dts
Normal file
247
target/linux/ramips/dts/mt7621_etisalat_s3.dts
Normal file
@ -0,0 +1,247 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "etisalat,s3", "mediatek,mt7621-soc";
|
||||
model = "Etisalat S3";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac0;
|
||||
|
||||
led-boot = &led_status_green;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_status_red;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
label = "blue:wan";
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status_green: led-1 {
|
||||
label = "green:status";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status_red: led-2 {
|
||||
label = "red:status";
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
ubi-concat {
|
||||
compatible = "mtd-concat";
|
||||
devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "ubi";
|
||||
reg = <0x0 0x4f80000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "sercomm,sc-partitions", "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x100000>;
|
||||
sercomm,scpart-id = <0>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "dynamic partition map";
|
||||
reg = <0x100000 0x100000>;
|
||||
sercomm,scpart-id = <1>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@200000 {
|
||||
label = "Factory";
|
||||
reg = <0x200000 0x100000>;
|
||||
sercomm,scpart-id = <2>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_21000: macaddr@21000 {
|
||||
reg = <0x21000 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@300000 {
|
||||
label = "Boot Flag";
|
||||
reg = <0x300000 0x100000>;
|
||||
sercomm,scpart-id = <3>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "kernel";
|
||||
reg = <0x400000 0x600000>;
|
||||
sercomm,scpart-id = <4>;
|
||||
};
|
||||
|
||||
partition@a00000 {
|
||||
label = "Kernel 2";
|
||||
reg = <0xa00000 0x600000>;
|
||||
sercomm,scpart-id = <5>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
ubiconcat0: partition@1000000 {
|
||||
label = "File System 1";
|
||||
reg = <0x1000000 0x2000000>;
|
||||
sercomm,scpart-id = <6>;
|
||||
};
|
||||
|
||||
partition@3000000 {
|
||||
label = "File System 2";
|
||||
reg = <0x3000000 0x2000000>;
|
||||
sercomm,scpart-id = <7>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
ubiconcat1: partition@5000000 {
|
||||
label = "Configuration/log";
|
||||
reg = <0x5000000 0x1400000>;
|
||||
sercomm,scpart-id = <8>;
|
||||
};
|
||||
|
||||
ubiconcat2: partition@6400000 {
|
||||
label = "application tmp buffer (Ftool)";
|
||||
reg = <0x6400000 0x1b80000>;
|
||||
sercomm,scpart-id = <9>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_21000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(3)>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_21000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(2)>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_21000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-handle = <ðphy0>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_21000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(11)>;
|
||||
};
|
||||
|
||||
&mdio {
|
||||
ethphy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uartlite3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "jtag";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
@ -79,9 +79,9 @@ define Device/sercomm_dxx
|
||||
lzma -a0 | uImage lzma
|
||||
IMAGES += factory.img
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
IMAGE/factory.img := append-ubi | sercomm-part-tag rootfs | \
|
||||
sercomm-prepend-tagged-kernel kernel | gzip | sercomm-payload | \
|
||||
sercomm-crypto
|
||||
IMAGE/factory.img := append-ubi | check-size | \
|
||||
sercomm-part-tag rootfs | sercomm-prepend-tagged-kernel kernel | \
|
||||
gzip | sercomm-payload | sercomm-crypto
|
||||
SERCOMM_KERNEL_OFFSET := 0x400100
|
||||
SERCOMM_ROOTFS_OFFSET := 0x1000000
|
||||
endef
|
||||
|
||||
@ -798,6 +798,19 @@ define Device/elecom_wrc-2533gst2
|
||||
endef
|
||||
TARGET_DEVICES += elecom_wrc-2533gst2
|
||||
|
||||
define Device/etisalat_s3
|
||||
$(Device/sercomm_dxx)
|
||||
IMAGE_SIZE := 32768k
|
||||
SERCOMM_HWID := DDK
|
||||
SERCOMM_HWVER := 10000
|
||||
SERCOMM_SWVER := 4009
|
||||
DEVICE_VENDOR := Etisalat
|
||||
DEVICE_MODEL := S3
|
||||
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware \
|
||||
kmod-usb3 uboot-envtools
|
||||
endef
|
||||
TARGET_DEVICES += etisalat_s3
|
||||
|
||||
define Device/firefly_firewrt
|
||||
$(Device/dsa-migration)
|
||||
IMAGE_SIZE := 16064k
|
||||
|
||||
@ -26,6 +26,7 @@ asus,rt-n56u-b1)
|
||||
beeline,smartbox-flash|\
|
||||
beeline,smartbox-giga|\
|
||||
beeline,smartbox-turbo|\
|
||||
etisalat,s3|\
|
||||
rostelecom,rt-sf-1)
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
|
||||
;;
|
||||
|
||||
@ -64,6 +64,7 @@ platform_do_upgrade() {
|
||||
dlink,dir-2660-a1|\
|
||||
dlink,dir-3060-a1|\
|
||||
dlink,dir-853-a3|\
|
||||
etisalat,s3|\
|
||||
h3c,tx1800-plus|\
|
||||
h3c,tx1801-plus|\
|
||||
h3c,tx1806|\
|
||||
|
||||
Loading…
Reference in New Issue
Block a user