mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
ramips: add support for Netgear EX6130
Specifications: * SoC: MT7620A * RAM: 64 MB DDR * Flash: 8MB NOR SPI flash * WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz) * LAN: 1x100M The -factory images can be flashed from the device's web interface or via nmrpflash. The device seems to use base PCB as EX3700/EX3800, but supporting AC1200 using MT7612E. MAC adresses: 5.0 GHz 0x8004 *:9a 2.4 GHz 0x4 *:9b lan 0x28 *:9b wan 0x2e *:9c Since this is a one-port device, although wan MAC address is set in flash, it is not used in OpenWrt setup. Signed-off-by: Frederik Noe-Sdun <Frederik.Sdun@googlemail.com> [rebased, extended commit message, tiny DTS style fixes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Frederik Noe-Sdun
Adrian Schmutzler
parent
0ff2385a92
commit
0cbd2c74d0
@ -2,10 +2,7 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "mt7620a.dtsi"
|
||||
#include "mt7620a_netgear_ex3700_ex6130.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "netgear,ex3700", "ralink,mt7620a-soc";
|
||||
@ -18,10 +15,6 @@
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
@ -61,109 +54,4 @@
|
||||
gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "config";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x790000>;
|
||||
};
|
||||
|
||||
partition@7e0000 {
|
||||
label = "board_data";
|
||||
reg = <0x7e0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7f0000 {
|
||||
label = "nvram";
|
||||
reg = <0x7f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
mt76@0,0 {
|
||||
reg = <0x0000 0 0 0 0 >;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x28>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
ralink,mtd-eeprom = <&factory 0x0>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
default {
|
||||
ralink,group = "i2c", "rgmii2", "spi refclk";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
115
target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi
Normal file
115
target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi
Normal file
@ -0,0 +1,115 @@
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "mt7620a.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "config";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x790000>;
|
||||
};
|
||||
|
||||
partition@7e0000 {
|
||||
label = "board_data";
|
||||
reg = <0x7e0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7f0000 {
|
||||
label = "nvram";
|
||||
reg = <0x7f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
mt76@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x28>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
ralink,mtd-eeprom = <&factory 0x0>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
default {
|
||||
ralink,group = "i2c", "rgmii2", "spi refclk";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
57
target/linux/ramips/dts/mt7620a_netgear_ex6130.dts
Normal file
57
target/linux/ramips/dts/mt7620a_netgear_ex6130.dts
Normal file
@ -0,0 +1,57 @@
|
||||
/* This file is released into the public domain */
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7620a_netgear_ex3700_ex6130.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "netgear,ex6130", "ralink,mt7620a-soc";
|
||||
model = "Netgear EX6130";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_green;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power_g {
|
||||
label = "ex6130:green:power";
|
||||
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
power_a {
|
||||
label = "ex6130:amber:power";
|
||||
gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_g {
|
||||
label = "ex6130:green:router";
|
||||
gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_r {
|
||||
label = "ex6130:red:router";
|
||||
gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
device_g {
|
||||
label = "ex6130:green:device";
|
||||
gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
device_r {
|
||||
label = "ex6130:red:device";
|
||||
gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "ex6130:green:wps";
|
||||
gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -612,6 +612,19 @@ define Device/netgear_ex3700
|
||||
endef
|
||||
TARGET_DEVICES += netgear_ex3700
|
||||
|
||||
define Device/netgear_ex6130
|
||||
MTK_SOC := mt7620a
|
||||
NETGEAR_BOARD_ID := U12H319T50_NETGEAR
|
||||
BLOCKSIZE := 4k
|
||||
IMAGE_SIZE := 7744k
|
||||
IMAGES += factory.chk
|
||||
IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk
|
||||
DEVICE_PACKAGES := kmod-mt76x2
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := EX6130
|
||||
endef
|
||||
TARGET_DEVICES += netgear_ex6130
|
||||
|
||||
define Device/netgear_wn3000rp-v3
|
||||
MTK_SOC := mt7620a
|
||||
IMAGE_SIZE := 7872k
|
||||
|
||||
@ -155,7 +155,8 @@ netgear,ex2700|\
|
||||
netgear,wn3000rp-v3)
|
||||
set_wifi_led "$boardname:green:router"
|
||||
;;
|
||||
netgear,ex3700)
|
||||
netgear,ex3700|\
|
||||
netgear,ex6130)
|
||||
ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
|
||||
ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
|
||||
;;
|
||||
|
||||
@ -39,6 +39,7 @@ ramips_setup_interfaces()
|
||||
kimax,u25awf-h1|\
|
||||
netgear,ex2700|\
|
||||
netgear,ex3700|\
|
||||
netgear,ex6130|\
|
||||
netgear,wn3000rp-v3|\
|
||||
planex,cs-qr10|\
|
||||
planex,mzk-ex300np|\
|
||||
|
||||
Loading…
Reference in New Issue
Block a user