ramips: add support for Netgear EX6130

Specifications:
* SoC: MT7620A
* RAM: 64 MB DDR
* Flash: 8MB NOR SPI flash
* WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz)
* LAN: 1x100M

The -factory images can be flashed from the
device's web interface or via nmrpflash.

The device seems to use base PCB as EX3700/EX3800,
but supporting AC1200 using MT7612E.

MAC adresses:
5.0 GHz  0x8004  *:9a
2.4 GHz  0x4     *:9b
lan      0x28    *:9b
wan      0x2e    *:9c

Since this is a one-port device, although wan MAC address is
set in flash, it is not used in OpenWrt setup.

Signed-off-by: Frederik Noe-Sdun <Frederik.Sdun@googlemail.com>
[rebased, extended commit message, tiny DTS style fixes]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

target/linux/ramips/dts/mt7620a_netgear_ex3700.dts

@@ -2,10 +2,7 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7620a_netgear_ex3700_ex6130.dtsi"
-#include <dt-bindings/input/input.h>
-
-#include "mt7620a.dtsi"
 
 / {
 	compatible = "netgear,ex3700", "ralink,mt7620a-soc";
@@ -18,10 +15,6 @@
 		led-upgrade = &led_power_green;
 	};
 
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -61,109 +54,4 @@
 			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "config";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x50000 0x790000>;
-			};
-
-			partition@7e0000 {
-				label = "board_data";
-				reg = <0x7e0000 0x10000>;
-				read-only;
-			};
-
-			partition@7f0000 {
-				label = "nvram";
-				reg = <0x7f0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pcie0 {
-	mt76@0,0 {
-		reg = <0x0000 0 0 0 0 >;
-		mediatek,mtd-eeprom = <&factory 0x8000>;
-		ieee80211-freq-limit = <5000000 6000000>;
-	};
-};
-
-&ethernet {
-	mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		default {
-			ralink,group = "i2c", "rgmii2", "spi refclk";
-			ralink,function = "gpio";
-		};
-	};
 };

target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi

@@ -0,0 +1,115 @@
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "mt7620a.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x790000>;
+			};
+
+			partition@7e0000 {
+				label = "board_data";
+				reg = <0x7e0000 0x10000>;
+				read-only;
+			};
+
+			partition@7f0000 {
+				label = "nvram";
+				reg = <0x7f0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x8000>;
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		default {
+			ralink,group = "i2c", "rgmii2", "spi refclk";
+			ralink,function = "gpio";
+		};
+	};
+};

target/linux/ramips/dts/mt7620a_netgear_ex6130.dts

@@ -0,0 +1,57 @@
+/* This file is released into the public domain */
+
+/dts-v1/;
+
+#include "mt7620a_netgear_ex3700_ex6130.dtsi"
+
+/ {
+	compatible = "netgear,ex6130", "ralink,mt7620a-soc";
+	model = "Netgear EX6130";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_green: power_g {
+			label = "ex6130:green:power";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		power_a {
+			label = "ex6130:amber:power";
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+
+		router_g {
+			label = "ex6130:green:router";
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		};
+
+		router_r {
+			label = "ex6130:red:router";
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		};
+
+		device_g {
+			label = "ex6130:green:device";
+			gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+		};
+
+		device_r {
+			label = "ex6130:red:device";
+			gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "ex6130:green:wps";
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

target/linux/ramips/image/mt7620.mk

@@ -612,6 +612,19 @@ define Device/netgear_ex3700
 endef
 TARGET_DEVICES += netgear_ex3700
 
+define Device/netgear_ex6130
+  MTK_SOC := mt7620a
+  NETGEAR_BOARD_ID := U12H319T50_NETGEAR
+  BLOCKSIZE := 4k
+  IMAGE_SIZE := 7744k
+  IMAGES += factory.chk
+  IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk
+  DEVICE_PACKAGES := kmod-mt76x2
+  DEVICE_VENDOR := NETGEAR
+  DEVICE_MODEL := EX6130
+endef
+TARGET_DEVICES += netgear_ex6130
+
 define Device/netgear_wn3000rp-v3
   MTK_SOC := mt7620a
   IMAGE_SIZE := 7872k

target/linux/ramips/mt7620/base-files/etc/board.d/01_leds

@@ -155,7 +155,8 @@ netgear,ex2700|\
 netgear,wn3000rp-v3)
 	set_wifi_led "$boardname:green:router"
 	;;
-netgear,ex3700)
+netgear,ex3700|\
+netgear,ex6130)
 	ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
 	ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
 	;;

target/linux/ramips/mt7620/base-files/etc/board.d/02_network

@@ -39,6 +39,7 @@ ramips_setup_interfaces()
 	kimax,u25awf-h1|\
 	netgear,ex2700|\
 	netgear,ex3700|\
+	netgear,ex6130|\
 	netgear,wn3000rp-v3|\
 	planex,cs-qr10|\
 	planex,mzk-ex300np|\