From 0ab9f283f75ad8314ad4be7c70d1397e9dbbfe15 Mon Sep 17 00:00:00 2001 From: Chuanhong Guo Date: Thu, 16 May 2019 15:09:07 +0800 Subject: [PATCH] ramips: add support for TOTOLINK LR1200 Specifications: - SoC: MT7628DAN (MT7628AN with 64MB built-in RAM) - Flash: 8M SPI NOR - Ethernet: 5x 10/100Mbps - WiFi: 2.4G: MT7628 built-in 5G: MT7612E - 1x miniPCIe slot for LTE modem (only USB pins connected) - 1x SIM slot Flash instruction: U-boot has a builtin web recovery page: 1. Hold the reset button while powering it up 2. Connect to the ethernet and set an IP in 192.168.1.0/24 range 3. Open your browser and upload firmware through http://192.168.1.1 Note about the LTE modem: If your router comes with an EC25 module and it doesn't show up as a QMI device, you should do the following to switch it to QMI mode: 1. Install kmod-usb-serial-option and a terminal software (e.g. minicom or screen). All 4 serial ports of the modem should be available now. 2. Open /dev/ttyUSB3 with the terminal software and type this AT command: AT+QCFG="usbnet",0 3. Power-cycle the router. You should now get a QMI device recognized. Signed-off-by: Chuanhong Guo --- .../ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/dts/TOTOLINK-LR1200.dts | 156 ++++++++++++++++++ target/linux/ramips/image/mt76x8.mk | 8 + 3 files changed, 165 insertions(+) create mode 100644 target/linux/ramips/dts/TOTOLINK-LR1200.dts diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index aa0816c9cc2..96e5b7e1ccf 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -120,6 +120,7 @@ ramips_setup_interfaces() sap-g3200u3|\ sk-wb8|\ telco-electronics,x1|\ + totolink,lr1200|\ unielec,u7621-06-256m-16m|\ unielec,u7621-06-512m-64m|\ vr500|\ diff --git a/target/linux/ramips/dts/TOTOLINK-LR1200.dts b/target/linux/ramips/dts/TOTOLINK-LR1200.dts new file mode 100644 index 00000000000..81aa8db915c --- /dev/null +++ b/target/linux/ramips/dts/TOTOLINK-LR1200.dts @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "totolink,lr1200", "mediatek,mt7628dan"; + model = "TOTOLINK LR1200"; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: sys { + label = "lr1200:blue:sys"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + sms { + label = "lr1200:blue:sms"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + wifi { + label = "lr1200:blue:wifi"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + 3g { + label = "lr1200:blue:3g"; + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + }; + 4g { + label = "lr1200:blue:4g"; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + }; + rssi1 { + label = "lr1200:blue:rssi1"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + rssi2 { + label = "lr1200:blue:rssi2"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + rssi3 { + label = "lr1200:blue:rssi3"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + rssi4 { + label = "lr1200:blue:rssi4"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + gpio_modem_reset { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "modem-reset"; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "gpio", "i2c", "i2s", "refclk", "uart1", "wdt", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&wmac { + status = "okay"; + ralink,mtd-eeprom = <&factory 0x4>; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 4e6a5d1ca9b..2280a1a6180 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -183,6 +183,14 @@ define Device/skylab_skw92a endef TARGET_DEVICES += skylab_skw92a +define Device/totolink_lr1200 + DTS := TOTOLINK-LR1200 + IMAGE_SIZE := 7872k + DEVICE_TITLE := TOTOLINK LR1200 + DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 uqmi +endef +TARGET_DEVICES += totolink_lr1200 + define Device/tplink_tl-wa801nd-v5 $(Device/tplink) DTS := TL-WA801NDV5