mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 06:57:57 +00:00
ramips: add support for Kroks Rt-Pot mXw DS RSIM router
Aka "Kroks KNdRt31R19". Ported from v19.07.8 of OpenWrt fork: see https://github.com/kroks-free/openwrt for support of other models. Device specs: - CPU: MediaTek MT7628AN - Flash: 16MB SPI NOR - RAM: 64MB - Bootloader: U-Boot - Ethernet: 1x 10/100 Mbps - 2.4 GHz: b/g/n SoC - mPCIe: 1x (usually equipped with an LTE modem by vendor) - Buttons: reset - LEDs: 1x Modem, 1x Injector, 1x Wi-Fi, 1x Status Flashing: - sysupgrade image via stock firmware WEB interface. - U-Boot launches a WEB server if Reset button is held during power up. Server IP: 192.168.1.1 SIM card switching: The device supports up to 4 SIM cards - 2 locally on board and 2 on remote SIM-injector. By default, 1-st local SIM is active. To switch to e.g. 1-st remote SIM: echo 0 > /sys/class/gpio/modem1power/value echo 0 > /sys/class/gpio/modem1sim1/value echo 1 > /sys/class/gpio/modem1rsim1/value echo 1 > /sys/class/gpio/modem1power/value MAC addresses as verified by OEM firmware: vendor OpenWrt source LAN eth0 factory 0x4 (label) 2g wlan0 label Signed-off-by: Kroks <dev@kroks.ru> [butirsky@gmail.com: port to master; drop dts-v1] Signed-off-by: Andrey Butirsky <butirsky@gmail.com>
This commit is contained in:
parent
837fd23c80
commit
0a79c77a4e
@ -37,6 +37,7 @@ beeline,smartbox-turbo)
|
||||
;;
|
||||
buffalo,wsr-1166dhp|\
|
||||
buffalo,wsr-600dhp|\
|
||||
kroks,kndrt31r19|\
|
||||
mediatek,linkit-smart-7688|\
|
||||
samknows,whitebox-v8|\
|
||||
xiaomi,mi-router-4c|\
|
||||
|
116
target/linux/ramips/dts/mt7628an_kroks.dtsi
Normal file
116
target/linux/ramips/dts/mt7628an_kroks.dtsi
Normal file
@ -0,0 +1,116 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
led-boot = &led_status;
|
||||
led-failsafe = &led_status;
|
||||
led-running = &led_status;
|
||||
led-upgrade = &led_status;
|
||||
serial1 = &uart1;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status: status {
|
||||
label = "led:status";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "led:wifi";
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xfb0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio_reset {
|
||||
groups = "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
p0led_an {
|
||||
groups = "p0led_an";
|
||||
function = "p0led_an";
|
||||
};
|
||||
};
|
||||
|
||||
&factory {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_4: macaddr@4 {
|
||||
reg = <0x4 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
64
target/linux/ramips/dts/mt7628an_kroks_kndrt31r19.dts
Normal file
64
target/linux/ramips/dts/mt7628an_kroks_kndrt31r19.dts
Normal file
@ -0,0 +1,64 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an_kroks.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "kroks,kndrt31r19", "mediatek,mt7628an-soc";
|
||||
model = "Kroks KNdRt31R19";
|
||||
|
||||
leds {
|
||||
status {
|
||||
label = "red:status";
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "yellow:wifi";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
modem1power {
|
||||
gpio-export,name = "modem1power";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
modem1sim1 {
|
||||
gpio-export,name = "modem1sim1";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
modem1sim2 {
|
||||
gpio-export,name = "modem1sim2";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
modem1rsim1 {
|
||||
gpio-export,name = "modem1rsim1";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
modem1rsim2 {
|
||||
gpio-export,name = "modem1rsim2";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 40 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x2f>;
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2s", "i2c", "p4led_an", "p3led_an", "wled_an";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
@ -310,6 +310,17 @@ define Device/jotale_js76x8-32m
|
||||
endef
|
||||
TARGET_DEVICES += jotale_js76x8-32m
|
||||
|
||||
define Device/kroks_kndrt31r19
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_VENDOR := Kroks
|
||||
DEVICE_MODEL := Rt-Pot mXw DS RSIM
|
||||
DEVICE_ALT0_VENDOR := Kroks
|
||||
DEVICE_ALT0_MODEL := KNdRt31R19
|
||||
DEVICE_PACKAGES := kmod-usb2 uqmi
|
||||
SUPPORTED_DEVICES += kndrt31r19
|
||||
endef
|
||||
TARGET_DEVICES += kroks_kndrt31r19
|
||||
|
||||
define Device/mediatek_linkit-smart-7688
|
||||
IMAGE_SIZE := 32448k
|
||||
DEVICE_VENDOR := MediaTek
|
||||
|
@ -131,6 +131,7 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
|
||||
;;
|
||||
kroks,kndrt31r19|\
|
||||
tplink,tl-mr3020-v3)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "6@eth0"
|
||||
|
Loading…
Reference in New Issue
Block a user