kernel: bump 5.4 to 5.4.119

Removed upstreamed:
  generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch
  bcm63xx/patches-5.4/434-nand-brcmnand-fix-OOB-R-W-with-Hamming-ECC.patch*

Removed/code was included upstream and therefore redundant:
  ramips/patches-5.4/999-fix-pci-init-mt7620.patch

All other patches automatically rebased.

* update_kernel.sh did not flag this yet it was included in 5.4.119[1], as a
  result of the rebase, I removed my testing lines since I did not go back to
  test built or to run test 5.4.119 with the removed patch present.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.4.119&id=e5b3e69eb36ac1178a7a2392616fd29afd288c4e

Signed-off-by: John Audia <graysky@archlinux.us>

include/kernel-version.mk

@@ -6,10 +6,10 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-5.4 = .118
+LINUX_VERSION-5.4 = .119
 LINUX_VERSION-5.10 = .39
 
-LINUX_KERNEL_HASH-5.4.118 = d970509c274fd2f5a9257a63c56f7a8b3e50ec12015bd6864dc4b76b38dc821b
+LINUX_KERNEL_HASH-5.4.119 = 71e7decf1e8149a8aed88d30df4f2a62a6c6b168111de6b261685ac7c0ecb2a0
 LINUX_KERNEL_HASH-5.10.39 = 5738a515ca97853481767360c568eae46c8d777d98a69e018a3299baa6b3f614
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))

target/linux/bcm27xx/patches-5.4/950-0280-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch

@@ -33,7 +33,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
  #define USB_VENDOR_ID_BELKIN		0x050d
  #define USB_DEVICE_ID_FLIP_KVM		0x3201
  
-@@ -1258,6 +1261,9 @@
+@@ -1259,6 +1262,9 @@
  #define USB_VENDOR_ID_XAT	0x2505
  #define USB_DEVICE_ID_XAT_CSR	0x0220
  

target/linux/bcm27xx/patches-5.4/950-0440-x86-PCI-sta2x11-use-default-DMA-address-translation.patch

@@ -31,7 +31,7 @@ Signed-off-by: Christoph Hellwig <hch@lst.de>
 
 --- a/arch/x86/Kconfig
 +++ b/arch/x86/Kconfig
-@@ -708,7 +708,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
+@@ -709,7 +709,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
  config STA2X11
  	bool "STA2X11 Companion Chip Support"
  	depends on X86_32_NON_STANDARD && PCI

target/linux/bcm27xx/patches-5.4/950-0482-media-add-V4L2_CTRL_TYPE_AREA-control-type.patch

@@ -39,7 +39,7 @@ Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
  	default:
  		return -EINVAL;
  	}
-@@ -2423,6 +2429,9 @@ static struct v4l2_ctrl *v4l2_ctrl_new(s
+@@ -2431,6 +2437,9 @@ static struct v4l2_ctrl *v4l2_ctrl_new(s
  	case V4L2_CTRL_TYPE_VP8_FRAME_HEADER:
  		elem_size = sizeof(struct v4l2_ctrl_vp8_frame_header);
  		break;
@@ -49,7 +49,7 @@ Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
  	default:
  		if (type < V4L2_CTRL_COMPOUND_TYPES)
  			elem_size = sizeof(s32);
-@@ -4087,6 +4096,18 @@ int __v4l2_ctrl_s_ctrl_string(struct v4l
+@@ -4098,6 +4107,18 @@ int __v4l2_ctrl_s_ctrl_string(struct v4l
  }
  EXPORT_SYMBOL(__v4l2_ctrl_s_ctrl_string);
  

target/linux/bcm27xx/patches-5.4/950-0492-media-v4l-Add-definitions-for-HEVC-stateless-decodin.patch

@@ -820,7 +820,7 @@ Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
  	default:
  		return -EINVAL;
  	}
-@@ -2434,6 +2532,15 @@ static struct v4l2_ctrl *v4l2_ctrl_new(s
+@@ -2442,6 +2540,15 @@ static struct v4l2_ctrl *v4l2_ctrl_new(s
  	case V4L2_CTRL_TYPE_VP8_FRAME_HEADER:
  		elem_size = sizeof(struct v4l2_ctrl_vp8_frame_header);
  		break;

target/linux/bcm27xx/patches-5.4/950-0495-media-uapi-hevc-Add-scaling-matrix-control.patch

@@ -106,7 +106,7 @@ Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
  	case V4L2_CTRL_TYPE_AREA:
  		area = p;
  		if (!area->width || !area->height)
-@@ -2541,6 +2548,9 @@ static struct v4l2_ctrl *v4l2_ctrl_new(s
+@@ -2549,6 +2556,9 @@ static struct v4l2_ctrl *v4l2_ctrl_new(s
  	case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS:
  		elem_size = sizeof(struct v4l2_ctrl_hevc_slice_params);
  		break;

target/linux/bcm27xx/patches-5.4/950-0646-spi-Force-CS_HIGH-if-GPIO-descriptors-are-used.patch

@@ -23,7 +23,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
 
 --- a/drivers/spi/spi.c
 +++ b/drivers/spi/spi.c
-@@ -3115,6 +3115,7 @@ static int __spi_validate_bits_per_word(
+@@ -3110,6 +3110,7 @@ static int __spi_validate_bits_per_word(
   */
  int spi_setup(struct spi_device *spi)
  {
@@ -31,7 +31,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
  	unsigned	bad_bits, ugly_bits;
  	int		status;
  
-@@ -3132,6 +3133,14 @@ int spi_setup(struct spi_device *spi)
+@@ -3127,6 +3128,14 @@ int spi_setup(struct spi_device *spi)
  		(SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL |
  		 SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL)))
  		return -EINVAL;

target/linux/bcm27xx/patches-5.4/950-0690-SQUASH-spi-Demote-SPI_CS_HIGH-warning-to-KERN_DEBUG.patch

@@ -15,7 +15,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
 
 --- a/drivers/spi/spi.c
 +++ b/drivers/spi/spi.c
-@@ -3127,8 +3127,8 @@ int spi_setup(struct spi_device *spi)
+@@ -3122,8 +3122,8 @@ int spi_setup(struct spi_device *spi)
  
  	if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods &&
  	    ctlr->cs_gpiods[spi->chip_select] && !(spi->mode & SPI_CS_HIGH)) {

target/linux/bcm27xx/patches-5.4/950-0908-media-v4l2-ctrls-Add-helper-to-register-properties.patch

@@ -29,7 +29,7 @@ Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
  
  #define dprintk(vdev, fmt, arg...) do {					\
  	if (!WARN_ON(!(vdev)) && ((vdev)->dev_debug & V4L2_DEV_DEBUG_CTRL)) \
-@@ -4578,3 +4579,42 @@ __poll_t v4l2_ctrl_poll(struct file *fil
+@@ -4589,3 +4590,42 @@ __poll_t v4l2_ctrl_poll(struct file *fil
  	return 0;
  }
  EXPORT_SYMBOL(v4l2_ctrl_poll);

target/linux/bcm63xx/patches-5.4/026-v5.8-mtd-rawnand-brcmnand-support-v2.1-v2.2-controllers.patch

@@ -183,7 +183,7 @@ Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-6-noltari@gmail.c
  	nand_writereg(ctrl, acc_control_offs, tmp);
  
  	brcmnand_set_sector_size_1k(host, cfg->sector_size_1k);
-@@ -2524,6 +2589,8 @@ const struct dev_pm_ops brcmnand_pm_ops
+@@ -2530,6 +2595,8 @@ const struct dev_pm_ops brcmnand_pm_ops
  EXPORT_SYMBOL_GPL(brcmnand_pm_ops);
  
  static const struct of_device_id brcmnand_of_match[] = {

target/linux/bcm63xx/patches-5.4/434-nand-brcmnand-fix-OOB-R-W-with-Hamming-ECC.patch

@@ -1,34 +0,0 @@
-From cf0d2fbaae9e962d91a321de75e0d4f9f9ccbdfe Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Thu, 21 Jan 2021 18:17:37 +0100
-Subject: [PATCH] nand: brcmnand: fix OOB R/W with Hamming ECC
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall
-always be done without ECC enabled.
-This is a problem when adding JFFS2 cleanmarkers to erased blocks. When JFFS2
-clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed
-from ff ff ff to 00 00 00, reporting incorrect ECC errors.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -2426,6 +2426,12 @@ static int brcmnand_attach_chip(struct n
- 
- 	ret = brcmstb_choose_ecc_layout(host);
- 
-+	/* If OOB is written with ECC enabled it will cause ECC errors */
-+	if (is_hamming_ecc(host->ctrl, &host->hwcfg)) {
-+		chip->ecc.write_oob = brcmnand_write_oob_raw;
-+		chip->ecc.read_oob = brcmnand_read_oob_raw;
-+	}
-+
- 	return ret;
- }
- 

target/linux/generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch

@@ -1,75 +0,0 @@
-From 3007b05df4301aad179acc6ca1c3645785576df6 Mon Sep 17 00:00:00 2001
-From: Alexander Lobakin <alobakin@pm.me>
-Date: Mon, 19 Apr 2021 12:53:06 +0000
-Subject: gro: fix napi_gro_frags() Fast GRO breakage due to IP
- alignment check
-
-Commit 7ad18ff6449cbd6beb26b53128ddf56d2685aa93 upstream.
-
-Commit 38ec4944b593 ("gro: ensure frag0 meets IP header alignment")
-did the right thing, but missed the fact that napi_gro_frags() logics
-calls for skb_gro_reset_offset() *before* pulling Ethernet header
-to the skb linear space.
-That said, the introduced check for frag0 address being aligned to 4
-always fails for it as Ethernet header is obviously 14 bytes long,
-and in case with NET_IP_ALIGN its start is not aligned to 4.
-
-Fix this by adding @nhoff argument to skb_gro_reset_offset() which
-tells if an IP header is placed right at the start of frag0 or not.
-This restores Fast GRO for napi_gro_frags() that became very slow
-after the mentioned commit, and preserves the introduced check to
-avoid silent unaligned accesses.
-
-From v1 [0]:
- - inline tiny skb_gro_reset_offset() to let the code be optimized
-   more efficively (esp. for the !NET_IP_ALIGN case) (Eric);
- - pull in Reviewed-by from Eric.
-
-[0] https://lore.kernel.org/netdev/20210418114200.5839-1-alobakin@pm.me
-
-Fixes: 38ec4944b593 ("gro: ensure frag0 meets IP header alignment")
-Reviewed-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: Alexander Lobakin <alobakin@pm.me>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/core/dev.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -5395,7 +5395,7 @@ static struct list_head *gro_list_prepar
- 	return head;
- }
- 
--static void skb_gro_reset_offset(struct sk_buff *skb)
-+static inline void skb_gro_reset_offset(struct sk_buff *skb, u32 nhoff)
- {
- 	const struct skb_shared_info *pinfo = skb_shinfo(skb);
- 	const skb_frag_t *frag0 = &pinfo->frags[0];
-@@ -5407,7 +5407,7 @@ static void skb_gro_reset_offset(struct
- 	if (skb_mac_header(skb) == skb_tail_pointer(skb) &&
- 	    pinfo->nr_frags &&
- 	    !PageHighMem(skb_frag_page(frag0)) &&
--	    (!NET_IP_ALIGN || !(skb_frag_off(frag0) & 3))) {
-+	    (!NET_IP_ALIGN || !((skb_frag_off(frag0) + nhoff) & 3))) {
- 		NAPI_GRO_CB(skb)->frag0 = skb_frag_address(frag0);
- 		NAPI_GRO_CB(skb)->frag0_len = min_t(unsigned int,
- 						    skb_frag_size(frag0),
-@@ -5640,7 +5640,7 @@ gro_result_t napi_gro_receive(struct nap
- 	skb_mark_napi_id(skb, napi);
- 	trace_napi_gro_receive_entry(skb);
- 
--	skb_gro_reset_offset(skb);
-+	skb_gro_reset_offset(skb, 0);
- 
- 	ret = napi_skb_finish(napi, skb, dev_gro_receive(napi, skb));
- 	trace_napi_gro_receive_exit(ret);
-@@ -5733,7 +5733,7 @@ static struct sk_buff *napi_frags_skb(st
- 	napi->skb = NULL;
- 
- 	skb_reset_mac_header(skb);
--	skb_gro_reset_offset(skb);
-+	skb_gro_reset_offset(skb, hlen);
- 
- 	if (unlikely(skb_gro_header_hard(skb, hlen))) {
- 		eth = skb_gro_header_slow(skb, hlen, 0);

target/linux/generic/hack-5.4/902-debloat_proc.patch

@@ -396,7 +396,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  }
 --- a/net/ipv4/route.c
 +++ b/net/ipv4/route.c
-@@ -409,6 +409,9 @@ static struct pernet_operations ip_rt_pr
+@@ -410,6 +410,9 @@ static struct pernet_operations ip_rt_pr
  
  static int __init ip_rt_proc_init(void)
  {

target/linux/generic/pending-5.4/495-mtd-core-add-get_mtd_device_by_node.patch

@@ -17,7 +17,7 @@ Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
 
 --- a/drivers/mtd/mtdcore.c
 +++ b/drivers/mtd/mtdcore.c
-@@ -1050,6 +1050,44 @@ out_unlock:
+@@ -1053,6 +1053,44 @@ out_unlock:
  }
  EXPORT_SYMBOL_GPL(get_mtd_device_nm);
  

target/linux/lantiq/patches-5.4/0001-MIPS-lantiq-add-pcie-driver.patch

@@ -4133,7 +4133,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 --- a/arch/mips/pci/pci-legacy.c
 +++ b/arch/mips/pci/pci-legacy.c
-@@ -308,3 +308,30 @@ char *__init pcibios_setup(char *str)
+@@ -313,3 +313,30 @@ char *__init pcibios_setup(char *str)
  		return pcibios_plat_setup(str);
  	return str;
  }

target/linux/lantiq/patches-5.4/0023-NET-PHY-add-led-support-for-intel-xway.patch

@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/net/phy/intel-xway.c
 +++ b/drivers/net/phy/intel-xway.c
-@@ -145,6 +145,51 @@
+@@ -157,6 +157,51 @@
  #define PHY_ID_PHY11G_VR9_1_2		0xD565A409
  #define PHY_ID_PHY22F_VR9_1_2		0xD565A419
  
@@ -65,7 +65,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  static int xway_gphy_config_init(struct phy_device *phydev)
  {
  	int err;
-@@ -183,6 +228,7 @@ static int xway_gphy_config_init(struct
+@@ -204,6 +249,7 @@ static int xway_gphy_config_init(struct
  	phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh);
  	phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl);
  

target/linux/ramips/patches-5.4/999-fix-pci-init-mt7620.patch

@@ -1,21 +0,0 @@
---- a/arch/mips/pci/pci-mt7620.c
-+++ b/arch/mips/pci/pci-mt7620.c
-@@ -32,6 +32,7 @@
- #define PPLL_CFG1			0x9c
- 
- #define PPLL_DRV			0xa0
-+#define PPLL_LD			BIT(23)
- #define PDRV_SW_SET			BIT(31)
- #define LC_CKDRVPD			BIT(19)
- #define LC_CKDRVOHZ			BIT(18)
-@@ -239,8 +240,8 @@ static int mt7620_pci_hw_init(struct pla
- 	rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
- 	mdelay(100);
- 
--	if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
--		dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
-+	if (!(rt_sysc_r32(PPLL_CFG1) & PPLL_LD)) {
-+		dev_err(&pdev->dev, "MT7620 PPLL is unlocked, aborting init\n");
- 		reset_control_assert(rstpcie0);
- 		rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
- 		return -1;