mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 05:38:00 +00:00
mediatek: filogic: add Acelink EW-7886CAX support
Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point. It has 512 MiB of RAM, one 2.5 Gbps PoE (802.3at) Ethernet port and on-SoC Wi-Fi. There is no printed MAC label (on my unit). My unit came with Mediatek's firmware (based on OpenWrt 21.02) installed. It was possible to simply upgrade using OpenWrt's sysupgrade tool. Another verified upgrade method is using U-Boot (requires UART). During every boot there is "U-Boot Boot Menu". Selecting option "2. Upgrade firmware" allows using U-Boot's tftp client to load and flash factory image. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
This commit is contained in:
Rafał Miłecki
parent
62277c485e
commit
07765f28b7
238
target/linux/mediatek/dts/mt7986a-acelink-ew-7886cax.dts
Normal file
238
target/linux/mediatek/dts/mt7986a-acelink-ew-7886cax.dts
Normal file
@ -0,0 +1,238 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/leds/common.h>
|
||||||
|
|
||||||
|
#include "mt7986a.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "acelink,ew-7886cax", "mediatek,mt7986a";
|
||||||
|
model = "Acelink EW-7886CAX";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
serial0 = &uart0;
|
||||||
|
led-boot = &led_status_blue;
|
||||||
|
led-running = &led_status_green;
|
||||||
|
led-upgrade = &led_status_red;
|
||||||
|
led-failsafe = &led_status_red;
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
stdout-path = "serial0:115200n8";
|
||||||
|
};
|
||||||
|
|
||||||
|
memory@40000000 {
|
||||||
|
reg = <0 0x40000000 0 0x20000000>;
|
||||||
|
device_type = "memory";
|
||||||
|
};
|
||||||
|
|
||||||
|
keys {
|
||||||
|
compatible = "gpio-keys";
|
||||||
|
|
||||||
|
key-restart {
|
||||||
|
label = "Reset";
|
||||||
|
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
||||||
|
linux,code = <KEY_RESTART>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
led_status_red: led-0 {
|
||||||
|
function = LED_FUNCTION_STATUS;
|
||||||
|
color = <LED_COLOR_ID_RED>;
|
||||||
|
gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
|
||||||
|
};
|
||||||
|
|
||||||
|
led_status_green: led-1 {
|
||||||
|
function = LED_FUNCTION_STATUS;
|
||||||
|
color = <LED_COLOR_ID_GREEN>;
|
||||||
|
gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
|
||||||
|
};
|
||||||
|
|
||||||
|
led_status_blue: led-2 {
|
||||||
|
function = LED_FUNCTION_STATUS;
|
||||||
|
color = <LED_COLOR_ID_BLUE>;
|
||||||
|
gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&crypto {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
ð {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
mac@1 {
|
||||||
|
compatible = "mediatek,eth-mac";
|
||||||
|
reg = <1>;
|
||||||
|
phy-mode = "2500base-x";
|
||||||
|
phy-handle = <&phy6>;
|
||||||
|
nvmem-cells = <&macaddr>;
|
||||||
|
nvmem-cell-names = "mac-address";
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio-bus {
|
||||||
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||||
|
reset-delay-us = <50000>;
|
||||||
|
reset-post-delay-us = <20000>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
/* Maxlinear GPY211C */
|
||||||
|
phy6: phy@6 {
|
||||||
|
compatible = "ethernet-phy-ieee802.3-c45";
|
||||||
|
reg = <6>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pcie_phy {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&pio {
|
||||||
|
spi_flash_pins: spi-flash-pins-33-to-38 {
|
||||||
|
mux {
|
||||||
|
function = "spi";
|
||||||
|
groups = "spi0", "spi0_wp_hold";
|
||||||
|
};
|
||||||
|
conf-pu {
|
||||||
|
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
||||||
|
drive-strength = <8>;
|
||||||
|
mediatek,pull-up-adv = <0>; /* bias-disable */
|
||||||
|
};
|
||||||
|
conf-pd {
|
||||||
|
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||||||
|
drive-strength = <8>;
|
||||||
|
mediatek,pull-down-adv = <0>; /* bias-disable */
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
wf_2g_5g_pins: wf_2g_5g-pins {
|
||||||
|
mux {
|
||||||
|
function = "wifi";
|
||||||
|
groups = "wf_2g", "wf_5g";
|
||||||
|
};
|
||||||
|
conf {
|
||||||
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||||
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||||
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||||
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||||
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||||
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||||
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||||
|
drive-strength = <4>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
wf_dbdc_pins: wf-dbdc-pins {
|
||||||
|
mux {
|
||||||
|
function = "wifi";
|
||||||
|
groups = "wf_dbdc";
|
||||||
|
};
|
||||||
|
conf {
|
||||||
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||||
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||||
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||||
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||||
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||||
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||||
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||||
|
drive-strength = <4>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi0 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&spi_flash_pins>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
flash@0 {
|
||||||
|
compatible = "spi-nand";
|
||||||
|
reg = <0>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
spi-max-frequency = <52000000>;
|
||||||
|
spi-rx-bus-width = <4>;
|
||||||
|
spi-tx-bus-width = <4>;
|
||||||
|
mediatek,nmbm;
|
||||||
|
mediatek,bmt-max-ratio = <1>;
|
||||||
|
mediatek,bmt-max-reserved-blocks = <64>;
|
||||||
|
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
reg = <0x0 0x100000>;
|
||||||
|
label = "bootloader";
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@100000 {
|
||||||
|
reg = <0x100000 0x80000>;
|
||||||
|
label = "u-boot-env";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@180000 {
|
||||||
|
compatible = "nvmem-cells";
|
||||||
|
reg = <0x180000 0x200000>;
|
||||||
|
label = "factory";
|
||||||
|
read-only;
|
||||||
|
|
||||||
|
nvmem-layout {
|
||||||
|
compatible = "fixed-layout";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
eeprom: eeprom@0 {
|
||||||
|
reg = <0x0 0x1000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
macaddr: macaddr@4 {
|
||||||
|
reg = <0x4 0x6>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@380000 {
|
||||||
|
reg = <0x380000 0x200000>;
|
||||||
|
label = "fip";
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@580000 {
|
||||||
|
reg = <0x580000 0x4000000>;
|
||||||
|
label = "ubi";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&trng {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart0 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&watchdog {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&wifi {
|
||||||
|
pinctrl-names = "default", "dbdc";
|
||||||
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
||||||
|
pinctrl-1 = <&wf_dbdc_pins>;
|
||||||
|
nvmem-cells = <&eeprom>;
|
||||||
|
nvmem-cell-names = "eeprom";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
@ -8,6 +8,9 @@ mediatek_setup_interfaces()
|
|||||||
local board="$1"
|
local board="$1"
|
||||||
|
|
||||||
case $board in
|
case $board in
|
||||||
|
acelink,ew-7886cax)
|
||||||
|
ucidef_set_interface_lan "eth0" "dhcp"
|
||||||
|
;;
|
||||||
acer,predator-w6)
|
acer,predator-w6)
|
||||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1
|
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1
|
||||||
;;
|
;;
|
||||||
|
|||||||
@ -105,6 +105,23 @@ define Build/cetron-header
|
|||||||
rm $@.tmp
|
rm $@.tmp
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
define Device/acelink_ew-7886cax
|
||||||
|
DEVICE_VENDOR := Acelink
|
||||||
|
DEVICE_MODEL := EW-7886CAX
|
||||||
|
DEVICE_DTS := mt7986a-acelink-ew-7886cax
|
||||||
|
DEVICE_DTS_DIR := ../dts
|
||||||
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
||||||
|
UBINIZE_OPTS := -E 5
|
||||||
|
BLOCKSIZE := 128k
|
||||||
|
PAGESIZE := 2048
|
||||||
|
IMAGE_SIZE := 65536k
|
||||||
|
KERNEL_IN_UBI := 1
|
||||||
|
IMAGES += factory.bin
|
||||||
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||||
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += acelink_ew-7886cax
|
||||||
|
|
||||||
define Device/acer_predator-w6
|
define Device/acer_predator-w6
|
||||||
DEVICE_VENDOR := Acer
|
DEVICE_VENDOR := Acer
|
||||||
DEVICE_MODEL := Predator W6
|
DEVICE_MODEL := Predator W6
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user