bcm47xx: remove support for kernel 4.14

We currently support three kernel versions on this target, let's just get rid of the oldest one. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2024-12-19 05:38:00 +00:00 · 2020-05-25 12:19:51 +02:00 · 2020-05-25 12:19:51 +02:00 · 06feb09e54
commit 06feb09e54
parent a002a24536
25 changed files with 0 additions and 2795 deletions
--- a/target/linux/bcm47xx/config-4.14
+++ b/target/linux/bcm47xx/config-4.14
@ -1,215 +0,0 @@
-CONFIG_ADM6996_PHY=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
-# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BCM47XX=y
-CONFIG_BCM47XX_BCMA=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_SSB=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_MIPS=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_NFLASH=y
-CONFIG_BCMA_PFLASH=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BGMAC_BCMA is not set
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BMIPS is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_WDT=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO_REGISTER=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCM47XXNFLASH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_PARSER_TRX=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-# CONFIG_OF is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_EXTIF=y
-CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_SSB_DRIVER_GPIO=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_HOST_SOC=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_SFLASH=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
-CONFIG_WATCHDOG_CORE=y
--- a/target/linux/bcm47xx/patches-4.14/031-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch
+++ b/target/linux/bcm47xx/patches-4.14/031-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch
@ -1,86 +0,0 @@
-From 272641206100e89656038180da12eff4f03d79d1 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dan.haab@luxul.com>
-Date: Tue, 27 Mar 2018 11:24:34 -0600
-Subject: [PATCH] MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
-
-Some Luxul devices use PCIe connected GPIO LEDs that are not available
-until the PCI subsytem and its drivers load. Using the same array for
-these LEDs would block registering any LEDs until all GPIOs become
-available. This may be undesired behavior as some LEDs should be
-available as early as possible (e.g. system status LED). This patch will
-allow registering available LEDs while deferring these PCIe GPIO
-connected 'extra' LEDs until they become available.
-
-Signed-off-by: Dan Haab <dan.haab@luxul.com>
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/18952/
-Signed-off-by: James Hogan <jhogan@kernel.org>
---
- arch/mips/bcm47xx/leds.c | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
--- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -409,6 +409,12 @@ bcm47xx_leds_luxul_xap_1500_v1[] __initc
- };
- 
- static const struct gpio_led
-+bcm47xx_leds_luxul_xap1500_v1_extra[] __initconst = {
-+	BCM47XX_GPIO_LED(44, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = {
- 	BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
- 	BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
-@@ -435,6 +441,11 @@ bcm47xx_leds_luxul_xwr_1750_v1[] __initc
- 	BCM47XX_GPIO_LED(15, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
- };
- 
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xwr1750_v1_extra[] __initconst = {
-+	BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
- /* Microsoft */
- 
- static const struct gpio_led
-@@ -528,6 +539,12 @@ static struct gpio_led_platform_data bcm
- 	bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds);		\
- } while (0)
- 
-+static struct gpio_led_platform_data bcm47xx_leds_pdata_extra __initdata = {};
-+#define bcm47xx_set_pdata_extra(dev_leds) do {				\
-+	bcm47xx_leds_pdata_extra.leds = dev_leds;			\
-+	bcm47xx_leds_pdata_extra.num_leds = ARRAY_SIZE(dev_leds);	\
-+} while (0)
-+
- void __init bcm47xx_leds_register(void)
- {
- 	enum bcm47xx_board board = bcm47xx_board_get();
-@@ -705,6 +722,7 @@ void __init bcm47xx_leds_register(void)
- 		break;
- 	case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
- 		bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1);
-+		bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xap1500_v1_extra);
- 		break;
- 	case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
- 		bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1);
-@@ -717,6 +735,7 @@ void __init bcm47xx_leds_register(void)
- 		break;
- 	case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
- 		bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
-+		bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xwr1750_v1_extra);
- 		break;
- 
- 	case BCM47XX_BOARD_MICROSOFT_MN700:
-@@ -760,4 +779,6 @@ void __init bcm47xx_leds_register(void)
- 	}
- 
- 	gpio_led_register_device(-1, &bcm47xx_leds_pdata);
-+	if (bcm47xx_leds_pdata_extra.num_leds)
-+		gpio_led_register_device(0, &bcm47xx_leds_pdata_extra);
- }
--- a/target/linux/bcm47xx/patches-4.14/032-MIPS-BCM47XX-Add-support-for-Netgear-WNR1000-V3.patch
+++ b/target/linux/bcm47xx/patches-4.14/032-MIPS-BCM47XX-Add-support-for-Netgear-WNR1000-V3.patch
@ -1,96 +0,0 @@
-From 88b882ba0b0b7439d16d2c9df7f111cdf793443b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 8 Apr 2018 22:39:15 +0200
-Subject: [PATCH] MIPS: BCM47XX: Add support for Netgear WNR1000 V3
-
-This adds support for detecting this model board and registers some LEDs
-and buttons.
-
-There are two uncommon things regarding this device:
-1) It can use two different "board_id" ID values.
-   Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used
-   in firmware file header. There are two reports (one from an OpenWrt
-   user) of a different "U12H139T50_NETGEAR" magic though.
-2) Power LEDs share GPIOs with buttons.
-   Amber one seems to share GPIO 2 with WPS button and green one seems
-   to share GPIO 3 with reset button. It remains unknown how to support
-   them and handle buttons at the same time. For that reason they aren't
-   added to the list of supported LEDs.
---
- arch/mips/bcm47xx/board.c                          | 2 ++
- arch/mips/bcm47xx/buttons.c                        | 9 +++++++++
- arch/mips/bcm47xx/leds.c                           | 9 +++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
- 4 files changed, 21 insertions(+)
-
--- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -172,6 +172,8 @@ struct bcm47xx_board_type_list1 bcm47xx_
- 	{{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T00_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T50_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
--- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -412,6 +412,12 @@ bcm47xx_buttons_netgear_wndr4500v1[] __i
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wnr1000_v3[] __initconst = {
-+	BCM47XX_GPIO_KEY(2, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(3, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wnr3500lv1[] __initconst = {
- 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
- 	BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-@@ -670,6 +676,9 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
- 		break;
-+	case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr1000_v3);
-+		break;
- 	case BCM47XX_BOARD_NETGEAR_WNR3500L:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1);
- 		break;
--- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -498,6 +498,12 @@ bcm47xx_leds_netgear_wndr4500v1[] __init
- };
- 
- static const struct gpio_led
-+bcm47xx_leds_netgear_wnr1000_v3[] __initconst = {
-+	BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(1, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_netgear_wnr3500lv1[] __initconst = {
- 	BCM47XX_GPIO_LED(0, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
- 	BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-@@ -758,6 +764,9 @@ void __init bcm47xx_leds_register(void)
- 	case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
- 		bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
- 		break;
-+	case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
-+		bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr1000_v3);
-+		break;
- 	case BCM47XX_BOARD_NETGEAR_WNR3500L:
- 		bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1);
- 		break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -110,6 +110,7 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_NETGEAR_WNDR4000,
- 	BCM47XX_BOARD_NETGEAR_WNDR4500V1,
- 	BCM47XX_BOARD_NETGEAR_WNDR4500V2,
-+	BCM47XX_BOARD_NETGEAR_WNR1000_V3,
- 	BCM47XX_BOARD_NETGEAR_WNR2000,
- 	BCM47XX_BOARD_NETGEAR_WNR3500L,
- 	BCM47XX_BOARD_NETGEAR_WNR3500U,
--- a/target/linux/bcm47xx/patches-4.14/033-firmware-bcm47xx_nvram-support-small-0x6000-B-NVRAM-.patch
+++ b/target/linux/bcm47xx/patches-4.14/033-firmware-bcm47xx_nvram-support-small-0x6000-B-NVRAM-.patch
@ -1,24 +0,0 @@
-From 663beaeacf2552ed07405e69e96a18775e069eab Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 8 Apr 2018 22:51:08 +0200
-Subject: [PATCH] firmware: bcm47xx_nvram: support small (0x6000 B) NVRAM
- partitions
-
-Some old devices with 4 MiB flashes were using 0x1000 block size and
-could use smaller (0x6000 bytes) flash partition for storing NVRAM
-content. This adds support for reading NVRAM on Netgear WNR1000 V3.
---
- drivers/firmware/broadcom/bcm47xx_nvram.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -36,7 +36,7 @@ struct nvram_header {
- 
- static char nvram_buf[NVRAM_SPACE];
- static size_t nvram_len;
-static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
-+static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
- 
- static u32 find_nvram_size(void __iomem *end)
- {
--- a/target/linux/bcm47xx/patches-4.14/035-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch
+++ b/target/linux/bcm47xx/patches-4.14/035-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch
@ -1,34 +0,0 @@
-From cdb8faa00e3fcdd0ad10add743516d616dc7d38e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Mon, 11 Mar 2019 22:08:22 +0100
-Subject: [PATCH] mips: bcm47xx: Enable USB power on Netgear WNDR3400v2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Eric has reported on OpenWrt's bug tracking system[1], that he's not
-able to use USB devices on his WNDR3400v2 device after the boot, until
-he turns on GPIO #21 manually through sysfs.
-
-1. https://bugs.openwrt.org/index.php?do=details&task_id=2170
-
-Cc: Rafał Miłecki <zajec5@gmail.com>
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Reported-by: Eric Bohlman <ericbohlman@gmail.com>
-Tested-by: Eric Bohlman <ericbohlman@gmail.com>
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-Signed-off-by: Paul Burton <paul.burton@mips.com>
---
- arch/mips/bcm47xx/workarounds.c | 1 +
- 1 file changed, 1 insertion(+)
-
--- a/arch/mips/bcm47xx/workarounds.c
-+++ b/arch/mips/bcm47xx/workarounds.c
-@@ -24,6 +24,7 @@ void __init bcm47xx_workarounds(void)
- 	case BCM47XX_BOARD_NETGEAR_WNR3500L:
- 		bcm47xx_workarounds_enable_usb_power(12);
- 		break;
-+	case BCM47XX_BOARD_NETGEAR_WNDR3400V2:
- 	case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
- 		bcm47xx_workarounds_enable_usb_power(21);
- 		break;
--- a/target/linux/bcm47xx/patches-4.14/159-cpu_fixes.patch
+++ b/target/linux/bcm47xx/patches-4.14/159-cpu_fixes.patch
@ -1,510 +0,0 @@
--- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -26,6 +26,38 @@
- extern void (*r4k_blast_dcache)(void);
- extern void (*r4k_blast_icache)(void);
- 
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
-+
-+static inline unsigned long bcm4710_dummy_rreg(void)
-+{
-+      return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
-+}
-+
-+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
-+
-+static inline unsigned long bcm4710_fill_tlb(void *addr)
-+{
-+      return *(unsigned long *)addr;
-+}
-+
-+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
-+
-+static inline void bcm4710_protected_fill_tlb(void *addr)
-+{
-+      unsigned long x;
-+      get_dbe(x, (unsigned long *)addr);;
-+}
-+
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
-  * This macro return a properly sign-extended address suitable as base address
-  * for indexed cache operations.  Two issues here:
-@@ -99,6 +131,7 @@ static inline void flush_icache_line_ind
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Index_Writeback_Inv_D, addr);
- 	__dflush_epilogue
- }
-@@ -126,6 +159,7 @@ static inline void flush_icache_line(uns
- static inline void flush_dcache_line(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Writeback_Inv_D, addr);
- 	__dflush_epilogue
- }
-@@ -133,6 +167,7 @@ static inline void flush_dcache_line(uns
- static inline void invalidate_dcache_line(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Invalidate_D, addr);
- 	__dflush_epilogue
- }
-@@ -206,6 +241,7 @@ static inline int protected_flush_icache
- #ifdef CONFIG_EVA
- 		return protected_cachee_op(Hit_Invalidate_I, addr);
- #else
-+		BCM4710_DUMMY_RREG();
- 		return protected_cache_op(Hit_Invalidate_I, addr);
- #endif
- 	}
-@@ -219,6 +255,7 @@ static inline int protected_flush_icache
-  */
- static inline int protected_writeback_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- #ifdef CONFIG_EVA
- 	return protected_cachee_op(Hit_Writeback_Inv_D, addr);
- #else
-@@ -576,8 +613,51 @@ static inline void invalidate_tcache_pag
- 		: "r" (base),						\
- 		  "i" (op));
- 
-+static inline void blast_dcache(void)
-+{
-+	unsigned long start = KSEG0;
-+	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+	unsigned long end = (start + dcache_size);
-+
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Index_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+
-+	BCM4710_FILL_TLB(start);
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Hit_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	unsigned long ws_end = current_cpu_data.dcache.ways <<
-+	                       current_cpu_data.dcache.waybit;
-+	unsigned long ws, addr;
-+	for (ws = 0; ws < ws_end; ws += ws_inc) {
-+		start = page + ws;
-+		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+			BCM4710_DUMMY_RREG();
-+			cache_op(Index_Writeback_Inv_D, addr);
-+		}
-+	}
-+}
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra)	\
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
- static inline void extra##blast_##pfx##cache##lsize(void)		\
- {									\
- 	unsigned long start = INDEX_BASE;				\
-@@ -589,6 +669,7 @@ static inline void extra##blast_##pfx##c
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache##lsize##_unroll32(addr|ws, indexop);	\
-@@ -603,6 +684,7 @@ static inline void extra##blast_##pfx##c
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-+	war								\
- 	do {								\
- 		cache##lsize##_unroll32(start, hitop);			\
- 		start += lsize * 32;					\
-@@ -621,6 +703,8 @@ static inline void extra##blast_##pfx##c
- 			       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
-+									\
- 	__##pfx##flush_prologue						\
- 									\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
-@@ -630,26 +714,26 @@ static inline void extra##blast_##pfx##c
- 	__##pfx##flush_epilogue						\
- }
- 
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
-
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
- 
- #define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
- static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
-@@ -678,53 +762,23 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde
- __BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
- 
- /* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra)	\
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2)	\
- static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
-	unsigned long lsize_2 = lsize * 2;				\
-	unsigned long lsize_3 = lsize * 3;				\
-	unsigned long lsize_4 = lsize * 4;				\
-	unsigned long lsize_5 = lsize * 5;				\
-	unsigned long lsize_6 = lsize * 6;				\
-	unsigned long lsize_7 = lsize * 7;				\
-	unsigned long lsize_8 = lsize * 8;				\
- 	unsigned long addr = start & ~(lsize - 1);			\
-	unsigned long aend = (end + lsize - 1) & ~(lsize - 1);		\
-	int lines = (aend - addr) / lsize;				\
-+	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	war								\
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-	while (lines >= 8) {						\
-		prot##cache_op(hitop, addr);				\
-		prot##cache_op(hitop, addr + lsize);			\
-		prot##cache_op(hitop, addr + lsize_2);			\
-		prot##cache_op(hitop, addr + lsize_3);			\
-		prot##cache_op(hitop, addr + lsize_4);			\
-		prot##cache_op(hitop, addr + lsize_5);			\
-		prot##cache_op(hitop, addr + lsize_6);			\
-		prot##cache_op(hitop, addr + lsize_7);			\
-		addr += lsize_8;					\
-		lines -= 8;						\
-	}								\
-									\
-	if (lines & 0x4) {						\
-		prot##cache_op(hitop, addr);				\
-		prot##cache_op(hitop, addr + lsize);			\
-		prot##cache_op(hitop, addr + lsize_2);			\
-		prot##cache_op(hitop, addr + lsize_3);			\
-		addr += lsize_4;					\
-	}								\
-									\
-	if (lines & 0x2) {						\
-		prot##cache_op(hitop, addr);				\
-		prot##cache_op(hitop, addr + lsize);			\
-		addr += lsize_2;					\
-	}								\
-									\
-	if (lines & 0x1) {						\
-+	while (1) {							\
-+		war2							\
- 		prot##cache_op(hitop, addr);				\
-+		if (addr == aend)					\
-+			break;						\
-+		addr += lsize;						\
- 	}								\
- 									\
- 	__##pfx##flush_epilogue						\
-@@ -732,8 +786,8 @@ static inline void prot##extra##blast_##
- 
- #ifndef CONFIG_EVA
- 
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
- 
- #else
- 
-@@ -770,15 +824,15 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache
- __BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
- 
- #endif
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
- __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
-	protected_, loongson2_)
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
-+	protected_, loongson2_, , )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
- /* blast_inv_dcache_range */
-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
- 
- /* Currently, this is very specific to Loongson-3 */
- #define __BUILD_BLAST_CACHE_NODE(pfx, desc, indexop, hitop, lsize)	\
--- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -428,6 +428,10 @@
- 		eretnc
- #else
- 		.set	arch=r4000
-+#ifdef CONFIG_BCM47XX
-+		nop
-+		nop
-+#endif
- 		eret
- 		.set	mips0
- #endif
--- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -21,6 +21,19 @@
- #include <asm/war.h>
- #include <asm/thread_info.h>
- 
-+#ifdef CONFIG_BCM47XX
-+# ifdef eret
-+#  undef eret
-+# endif
-+# define eret 					\
-+	.set push;				\
-+	.set noreorder;				\
-+	 nop; 					\
-+	 nop;					\
-+	 eret;					\
-+	.set pop;
-+#endif
-+
- 	__INIT
- 
- /*
-@@ -32,6 +45,9 @@
- NESTED(except_vec3_generic, 0, sp)
- 	.set	push
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- 	mfc0	k0, CP0_INDEX
- #endif
-@@ -55,6 +71,9 @@ NESTED(except_vec3_r4000, 0, sp)
- 	.set	push
- 	.set	arch=r4000
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+#endif
- 	mfc0	k1, CP0_CAUSE
- 	li	k0, 31<<2
- 	andi	k1, k1, 0x7c
--- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -39,6 +39,9 @@
- #include <asm/dma-coherence.h>
- #include <asm/mips-cps.h>
- 
-+/* For enabling BCM4710 cache workarounds */
-+static int bcm4710 = 0;
-+
- /*
-  * Bits describing what cache ops an SMP callback function may perform.
-  *
-@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s
- {
- 	unsigned long  dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page = blast_dcache_page;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_user_page = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_page_indexed = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void)
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache = blast_dcache;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -986,6 +998,8 @@ static void local_r4k_flush_cache_sigtra
- 	}
- 
- 	R4600_HIT_CACHEOP_WAR_IMPL;
-+	BCM4710_PROTECTED_FILL_TLB(addr);
-+	BCM4710_PROTECTED_FILL_TLB(addr + 4);
- 	if (!cpu_has_ic_fills_f_dc) {
- 		if (dc_lsize)
- 			vaddr ? flush_dcache_line(addr & ~(dc_lsize - 1))
-@@ -1880,6 +1894,17 @@ static void coherency_setup(void)
- 	 * silly idea of putting something else there ...
- 	 */
- 	switch (current_cpu_type()) {
-+	case CPU_BMIPS3300:
-+		{
-+			u32 cm;
-+			cm = read_c0_diag();
-+			/* Enable icache */
-+			cm |= (1 << 31);
-+			/* Enable dcache */
-+			cm |= (1 << 30);
-+			write_c0_diag(cm);
-+		}
-+		break;
- 	case CPU_R4000PC:
- 	case CPU_R4000SC:
- 	case CPU_R4000MC:
-@@ -1926,6 +1951,15 @@ void r4k_cache_init(void)
- 	extern void build_copy_page(void);
- 	struct cpuinfo_mips *c = &current_cpu_data;
- 
-+	/* Check if special workarounds are required */
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+	if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
-+		printk("Enabling BCM4710A0 cache workarounds.\n");
-+		bcm4710 = 1;
-+	} else
-+#endif
-+		bcm4710 = 0;
-+
- 	probe_pcache();
- 	probe_vcache();
- 	setup_scache();
-@@ -2004,7 +2038,15 @@ void r4k_cache_init(void)
- 	 */
- 	local_r4k___flush_cache_all(NULL);
- 
-+#ifdef CONFIG_BCM47XX
-+	{
-+		static void (*_coherency_setup)(void);
-+		_coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+		_coherency_setup();
-+	}
-+#else
- 	coherency_setup();
-+#endif
- 	board_cache_error_setup = r4k_cache_error_setup;
- 
- 	/*
--- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -983,6 +983,9 @@ void build_get_pgde32(u32 **p, unsigned
- 		uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
- 		uasm_i_addu(p, ptr, tmp, ptr);
- #else
-+#ifdef CONFIG_BCM47XX
-+		uasm_i_nop(p);
-+#endif
- 		UASM_i_LA_mostly(p, ptr, pgdc);
- #endif
- 		uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -1344,6 +1347,9 @@ static void build_r4000_tlb_refill_handl
- #ifdef CONFIG_64BIT
- 		build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-+# ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+# endif
- 		build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
- #endif
- 
-@@ -1355,6 +1361,9 @@ static void build_r4000_tlb_refill_handl
- 		build_update_entries(&p, K0, K1);
- 		build_tlb_write_entry(&p, &l, &r, tlb_random);
- 		uasm_l_leave(&l, p);
-+#ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+#endif
- 		uasm_i_eret(&p); /* return from trap */
- 	}
- #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-@@ -2064,6 +2073,9 @@ build_r4000_tlbchange_handler_head(u32 *
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
- #else
-+# ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+# endif
- 	build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
- #endif
- 
-@@ -2110,6 +2122,9 @@ build_r4000_tlbchange_handler_tail(u32 *
- 	build_tlb_write_entry(p, l, r, tlb_indexed);
- 	uasm_l_leave(l, *p);
- 	build_restore_work_registers(p);
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+#endif
- 	uasm_i_eret(p); /* return from trap */
- 
- #ifdef CONFIG_64BIT
--- a/target/linux/bcm47xx/patches-4.14/160-kmap_coherent.patch
+++ b/target/linux/bcm47xx/patches-4.14/160-kmap_coherent.patch
@ -1,78 +0,0 @@
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] kmap_coherent
-
-On ASUS WL-500gP there are some "Data bus error"s when executing simple
-commands liks "ps" or "cat /proc/1/cmdline".
-
-This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485
---
--- a/arch/mips/include/asm/cpu-features.h
-+++ b/arch/mips/include/asm/cpu-features.h
-@@ -187,6 +187,9 @@
- #ifndef cpu_has_local_ebase
- #define cpu_has_local_ebase	1
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
- 
- /*
-  * I-Cache snoops remote store.	 This only matters on SMP.  Some multiprocessors
--- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -80,4 +80,6 @@
- #define cpu_scache_line_size()		0
- #define cpu_has_vz			0
- 
-+#define cpu_use_kmap_coherent		0
-+
- #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
--- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -694,7 +694,7 @@ static inline void local_r4k_flush_cache
- 		map_coherent = (cpu_has_dc_aliases &&
- 				page_mapcount(page) &&
- 				!Page_dcache_dirty(page));
-		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			vaddr = kmap_coherent(page, addr);
- 		else
- 			vaddr = kmap_atomic(page);
-@@ -719,7 +719,7 @@ static inline void local_r4k_flush_cache
- 	}
- 
- 	if (vaddr) {
-		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			kunmap_coherent();
- 		else
- 			kunmap_atomic(vaddr);
--- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -170,7 +170,7 @@ void copy_user_highpage(struct page *to,
- 	void *vfrom, *vto;
- 
- 	vto = kmap_atomic(to);
-	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(from) && !Page_dcache_dirty(from)) {
- 		vfrom = kmap_coherent(from, vaddr);
- 		copy_page(vto, vfrom);
-@@ -192,7 +192,7 @@ void copy_to_user_page(struct vm_area_st
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
-	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(page) && !Page_dcache_dirty(page)) {
- 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(vto, src, len);
-@@ -210,7 +210,7 @@ void copy_from_user_page(struct vm_area_
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
-	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapcount(page) && !Page_dcache_dirty(page)) {
- 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(dst, vfrom, len);
--- a/target/linux/bcm47xx/patches-4.14/209-b44-register-adm-switch.patch
+++ b/target/linux/bcm47xx/patches-4.14/209-b44-register-adm-switch.patch
@ -1,121 +0,0 @@
-From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 9 Nov 2013 17:03:59 +0100
-Subject: [PATCH 210/210] b44: register adm switch
-
---
- drivers/net/ethernet/broadcom/b44.c |   57 +++++++++++++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/b44.h |    3 ++
- 2 files changed, 60 insertions(+)
-
--- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -31,6 +31,8 @@
- #include <linux/ssb/ssb.h>
- #include <linux/slab.h>
- #include <linux/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/adm6996-gpio.h>
- 
- #include <linux/uaccess.h>
- #include <asm/io.h>
-@@ -2251,6 +2253,69 @@ static void b44_adjust_link(struct net_d
- 	}
- }
- 
-+#ifdef CONFIG_BCM47XX
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+	int gpio;
-+	struct platform_device *pdev;
-+	struct adm6996_gpio_platform_data adm_data = {0};
-+	struct platform_device_info info = {0};
-+
-+	adm_data.model = ADM6996L;
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
-+	if (gpio >= 0)
-+		adm_data.eecs = gpio;
-+	else
-+		adm_data.eecs = 2;
-+
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
-+	if (gpio >= 0)
-+		adm_data.eesk = gpio;
-+	else
-+		adm_data.eesk = 3;
-+
-+	gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
-+	if (gpio >= 0)
-+		adm_data.eedi = gpio;
-+	else
-+		adm_data.eedi = 4;
-+
-+	/*
-+	 * We ignore the "adm_rc" GPIO here. The driver does not use it,
-+	 * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1.
-+	 */
-+
-+	info.parent = bp->sdev->dev;
-+	info.name = "adm6996_gpio";
-+	info.id = -1;
-+	info.data = &adm_data;
-+	info.size_data = sizeof(adm_data);
-+
-+	if (!bp->adm_switch) {
-+		pdev = platform_device_register_full(&info);
-+		if (IS_ERR(pdev))
-+			return PTR_ERR(pdev);
-+
-+		bp->adm_switch = pdev;
-+	}
-+	return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+	if (bp->adm_switch)
-+		platform_device_unregister(bp->adm_switch);
-+}
-+#else
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+	return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+
-+}
-+#endif /* CONFIG_BCM47XX */
-+
- static int b44_register_phy_one(struct b44 *bp)
- {
- 	struct mii_bus *mii_bus;
-@@ -2286,6 +2351,9 @@ static int b44_register_phy_one(struct b
- 	if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) &&
- 	    (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
- 
-+		if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
-+			b44_register_adm_switch(bp);
-+
- 		dev_info(sdev->dev,
- 			 "could not find PHY at %i, use fixed one\n",
- 			 bp->phy_addr);
-@@ -2480,6 +2548,7 @@ static void b44_remove_one(struct ssb_de
- 	unregister_netdev(dev);
- 	if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- 		b44_unregister_phy_one(bp);
-+	b44_unregister_adm_switch(bp);
- 	ssb_device_disable(sdev, 0);
- 	ssb_bus_may_powerdown(sdev->bus);
- 	netif_napi_del(&bp->napi);
--- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -408,6 +408,9 @@ struct b44 {
- 	struct mii_bus		*mii_bus;
- 	int			old_link;
- 	struct mii_if_info	mii_if;
-+
-+	/* platform device for associated switch */
-+	struct platform_device *adm_switch;
- };
- 
- #endif /* _B44_H */
--- a/target/linux/bcm47xx/patches-4.14/210-b44_phy_fix.patch
+++ b/target/linux/bcm47xx/patches-4.14/210-b44_phy_fix.patch
@ -1,54 +0,0 @@
--- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
- error:
- 	pr_warn("PHY: cannot reset MII transceiver isolate bit\n");
- }
-+
-+static void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+	char buf[20];
-+	struct ssb_device *sdev = bp->sdev;
-+
-+	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+	if (sdev->bus->sprom.board_num == 100) {
-+		bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+	} else {
-+		/* WL-HDD */
-+		if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
-+		    !strncmp(buf, "WL300-", strlen("WL300-"))) {
-+			if (sdev->bus->sprom.et0phyaddr == 0 &&
-+			    sdev->bus->sprom.et1phyaddr == 1)
-+				bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+		}
-+	}
-+	return;
-+}
- #else
- static inline void b44_wap54g10_workaround(struct b44 *bp)
- {
- }
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+}
- #endif
- 
- static int b44_setup_phy(struct b44 *bp)
-@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
- 	int err;
- 
- 	b44_wap54g10_workaround(bp);
-+	b44_bcm47xx_workarounds(bp);
- 
- 	if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- 		return 0;
-@@ -2181,6 +2206,8 @@ static int b44_get_invariants(struct b44
- 	 * valid PHY address. */
- 	bp->phy_addr &= 0x1F;
- 
-+	b44_bcm47xx_workarounds(bp);
-+
- 	memcpy(bp->dev->dev_addr, addr, ETH_ALEN);
- 
- 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
--- a/target/linux/bcm47xx/patches-4.14/280-activate_ssb_support_in_usb.patch
+++ b/target/linux/bcm47xx/patches-4.14/280-activate_ssb_support_in_usb.patch
@ -1,25 +0,0 @@
-This prevents the options from being delete with make kernel_oldconfig.
---
- drivers/ssb/Kconfig |    2 ++
- 1 file changed, 2 insertions(+)
-
--- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -31,6 +31,7 @@ config BCMA_HOST_PCI
- config BCMA_HOST_SOC
- 	bool "Support for BCMA in a SoC"
- 	depends on BCMA
-+	select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
- 	help
- 	  Host interface for a Broadcom AIX bus directly mapped into
- 	  the memory. This only works with the Broadcom SoCs from the
--- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -157,6 +157,7 @@ config SSB_SFLASH
- config SSB_EMBEDDED
- 	bool
- 	depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
-+	select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
- 	default y
- 
- config SSB_DRIVER_EXTIF
--- a/target/linux/bcm47xx/patches-4.14/300-fork_cacheflush.patch
+++ b/target/linux/bcm47xx/patches-4.14/300-fork_cacheflush.patch
@ -1,21 +0,0 @@
-From: Wolfram Joost <dbox2@frokaschwei.de>
-Subject: [PATCH] fork_cacheflush
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
---
--- a/arch/mips/include/asm/cacheflush.h
-+++ b/arch/mips/include/asm/cacheflush.h
-@@ -47,7 +47,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- 	unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
--- a/target/linux/bcm47xx/patches-4.14/310-no_highpage.patch
+++ b/target/linux/bcm47xx/patches-4.14/310-no_highpage.patch
@ -1,74 +0,0 @@
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] no highpage
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
---
--- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl
- #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
- 
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
- 
- extern void build_clear_page(void);
- extern void build_copy_page(void);
-@@ -105,11 +106,16 @@ static inline void clear_user_page(void
- 		flush_data_cache_page((unsigned long)addr);
- }
- 
-struct vm_area_struct;
-extern void copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+	struct page *to)
-+{
-+	extern void (*flush_data_cache_page)(unsigned long addr);
- 
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+	copy_page(vto, vfrom);
-+	if (!cpu_has_ic_fills_f_dc ||
-+	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+		flush_data_cache_page((unsigned long)vto);
-+}
- 
- /*
-  * These are used to make use of C type-checking..
--- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -164,30 +164,6 @@ void kunmap_coherent(void)
- 	preempt_enable();
- }
- 
-void copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *vfrom, *vto;
-
-	vto = kmap_atomic(to);
-	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
-	    page_mapcount(from) && !Page_dcache_dirty(from)) {
-		vfrom = kmap_coherent(from, vaddr);
-		copy_page(vto, vfrom);
-		kunmap_coherent();
-	} else {
-		vfrom = kmap_atomic(from);
-		copy_page(vto, vfrom);
-		kunmap_atomic(vfrom);
-	}
-	if ((!cpu_has_ic_fills_f_dc) ||
-	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-		flush_data_cache_page((unsigned long)vto);
-	kunmap_atomic(vto);
-	/* Make sure this page is cleared on other CPU's too before using it */
-	smp_wmb();
-}
-
- void copy_to_user_page(struct vm_area_struct *vma,
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
--- a/target/linux/bcm47xx/patches-4.14/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch
+++ b/target/linux/bcm47xx/patches-4.14/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch
@ -1,185 +0,0 @@
--- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
- 	{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
-+	{{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
- 	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
-@@ -160,9 +161,12 @@ struct bcm47xx_board_type_list1 bcm47xx_
- 	{{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"},
- 	{{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
- 	{{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
-+	{{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
-+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
- 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
--- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -27,6 +27,12 @@
- /* Asus */
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_asus_rtn10u[] __initconst = {
-+	BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(21, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_asus_rtn12[] __initconst = {
- 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
- 	BCM47XX_GPIO_KEY(1, KEY_RESTART),
-@@ -277,6 +283,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
- };
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
-+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
- 	BCM47XX_GPIO_KEY(5, KEY_WIMAX),
- 	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-@@ -385,6 +403,17 @@ bcm47xx_buttons_motorola_wr850gv2v3[] __
- /* Netgear */
- 
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
-+	BCM47XX_GPIO_KEY(12, KEY_RESTART),
-+	BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
- 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
- 	BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-@@ -471,6 +500,9 @@ int __init bcm47xx_buttons_register(void
- 	int err;
- 
- 	switch (board) {
-+	case BCM47XX_BOARD_ASUS_RTN10U:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
-+		break;
- 	case BCM47XX_BOARD_ASUS_RTN12:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
- 		break;
-@@ -601,6 +633,12 @@ int __init bcm47xx_buttons_register(void
- 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
- 		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT310NV2:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
-+		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
-+		break;
- 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
- 		break;
-@@ -664,6 +702,12 @@ int __init bcm47xx_buttons_register(void
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3);
- 		break;
- 
-+	case BCM47XX_BOARD_NETGEAR_R6300_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
-+		break;
-+	case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
-+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
-+		break;
- 	case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
- 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
- 		break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -72,6 +72,7 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_LINKSYS_WRT300NV11,
- 	BCM47XX_BOARD_LINKSYS_WRT310NV1,
- 	BCM47XX_BOARD_LINKSYS_WRT310NV2,
-+	BCM47XX_BOARD_LINKSYS_WRT320N_V1,
- 	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- 	BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
- 	BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
-@@ -98,9 +99,12 @@ enum bcm47xx_board {
- 	BCM47XX_BOARD_MOTOROLA_WR850GP,
- 	BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
- 
-+	BCM47XX_BOARD_NETGEAR_R6300_V1,
- 	BCM47XX_BOARD_NETGEAR_WGR614V8,
- 	BCM47XX_BOARD_NETGEAR_WGR614V9,
- 	BCM47XX_BOARD_NETGEAR_WGR614_V10,
-+	BCM47XX_BOARD_NETGEAR_WN2500RP_V1,
-+	BCM47XX_BOARD_NETGEAR_WN2500RP_V2,
- 	BCM47XX_BOARD_NETGEAR_WNDR3300,
- 	BCM47XX_BOARD_NETGEAR_WNDR3400V1,
- 	BCM47XX_BOARD_NETGEAR_WNDR3400V2,
--- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -30,6 +30,14 @@
- /* Asus */
- 
- static const struct gpio_led
-+bcm47xx_leds_asus_rtn10u[] __initconst = {
-+	BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+	BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_asus_rtn12[] __initconst = {
- 	BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- 	BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -314,6 +322,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
- };
- 
- static const struct gpio_led
-+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
-+	BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+	BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
- 	BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
- 	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-@@ -556,6 +571,9 @@ void __init bcm47xx_leds_register(void)
- 	enum bcm47xx_board board = bcm47xx_board_get();
- 
- 	switch (board) {
-+	case BCM47XX_BOARD_ASUS_RTN10U:
-+		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
-+		break;
- 	case BCM47XX_BOARD_ASUS_RTN12:
- 		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
- 		break;
-@@ -689,6 +707,9 @@ void __init bcm47xx_leds_register(void)
- 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
- 		break;
-+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
-+		break;
- 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
- 		break;
--- a/target/linux/bcm47xx/patches-4.14/400-mtd-bcm47xxpart-get-nvram.patch
+++ b/target/linux/bcm47xx/patches-4.14/400-mtd-bcm47xxpart-get-nvram.patch
@ -1,34 +0,0 @@
--- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -102,6 +102,7 @@ static int bcm47xxpart_parse(struct mtd_
- 	int trx_num = 0; /* Number of found TRX partitions */
- 	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
- 	int err;
-+	bool found_nvram = false;
- 
- 	/*
- 	 * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
-@@ -283,12 +284,23 @@ static int bcm47xxpart_parse(struct mtd_
- 		if (buf[0] == NVRAM_HEADER) {
- 			bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- 					     master->size - blocksize, 0);
-+			found_nvram = true;
- 			break;
- 		}
- 	}
- 
- 	kfree(buf);
- 
-+	if (!found_nvram) {
-+		pr_err("can not find a nvram partition reserve last block\n");
-+		bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
-+				     master->size - blocksize * 2, MTD_WRITEABLE);
-+		for (i = 0; i < curr_part; i++) {
-+			if (parts[i].size + parts[i].offset == master->size)
-+				parts[i].offset -= blocksize * 2;
-+		}
-+	}
-+
- 	/*
- 	 * Assume that partitions end at the beginning of the one they are
- 	 * followed by.
--- a/target/linux/bcm47xx/patches-4.14/610-pci_ide_fix.patch
+++ b/target/linux/bcm47xx/patches-4.14/610-pci_ide_fix.patch
@ -1,41 +0,0 @@
-From: b.sander
-Subject: [PATCH] pci: IDE fix
-
-These are standard probing messages when using pdc202xx_old:
-pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02)
-PCI: Enabling device 0000:00:01.0 (0004 -> 0007)
-PCI: Fixing up device 0000:00:01.0
-0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
-0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE
-pdc202xx_old 0000:00:01.0: 100% native mode on irq 6
-
-With the default MAX_HWIFS value after above we get:
-    ide2: BM-DMA at 0x0400-0x0407
-    ide3: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide2...
-hde: CF500, CFA DISK drive
-
-As you can see it's ide2 + ide3 and hde.
-
-With this patch applied we get:
-    ide0: BM-DMA at 0x0400-0x0407
-    ide1: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide0...
-hda: CF500, CFA DISK drive
-
-This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061
---
--- a/include/linux/ide.h
-+++ b/include/linux/ide.h
-@@ -241,7 +241,11 @@ static inline void ide_std_init_ports(st
- 	hw->io_ports.ctl_addr = ctl_addr;
- }
- 
-+#if defined CONFIG_BCM47XX
-+# define MAX_HWIFS	2
-+#else
- #define MAX_HWIFS	10
-+#endif
- 
- /*
-  * Now for the data we need to maintain per-drive:  ide_drive_t
--- a/target/linux/bcm47xx/patches-4.14/791-tg3-no-pci-sleep.patch
+++ b/target/linux/bcm47xx/patches-4.14/791-tg3-no-pci-sleep.patch
@ -1,17 +0,0 @@
-When the Ethernet controller is powered down and someone wants to 
-access the mdio bus like the witch driver (b53) the system crashed if 
-PCI_D3hot was set before. This patch deactivates this power sawing mode 
-when a switch driver is in use.
-
--- a/drivers/net/ethernet/broadcom/tg3.c
-+++ b/drivers/net/ethernet/broadcom/tg3.c
-@@ -4264,7 +4264,8 @@ static int tg3_power_down_prepare(struct
- static void tg3_power_down(struct tg3 *tp)
- {
- 	pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
-	pci_set_power_state(tp->pdev, PCI_D3hot);
-+	if (!tg3_flag(tp, ROBOSWITCH))
-+		pci_set_power_state(tp->pdev, PCI_D3hot);
- }
- 
- static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)
--- a/target/linux/bcm47xx/patches-4.14/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
+++ b/target/linux/bcm47xx/patches-4.14/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
@ -1,73 +0,0 @@
-From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 20 Nov 2014 21:32:42 +0100
-Subject: [PATCH] bcma: add table of serial flashes with smaller blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
- drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
--- a/drivers/bcma/driver_chipcommon_sflash.c
-+++ b/drivers/bcma/driver_chipcommon_sflash.c
-@@ -9,6 +9,7 @@
- 
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
-+#include <bcm47xx_board.h>
- 
- static struct resource bcma_sflash_resource = {
- 	.name	= "bcma_sflash",
-@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc
- 	{ NULL },
- };
- 
-+/* Some devices use smaller blocks (and have more of them) */
-+static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = {
-+	{ "M25P16", 0x14, 0x1000, 512, },
-+	{ "M25P32", 0x15, 0x1000, 1024, },
-+	{ NULL },
-+};
-+
- static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
- 	{ "SST25WF512", 1, 0x1000, 16, },
- 	{ "SST25VF512", 0x48, 0x1000, 16, },
-@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_
- 	bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
- }
- 
-+const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+	const struct bcma_sflash_tbl_e *e;
-+
-+	switch (board) {
-+	case BCM47XX_BOARD_NETGEAR_WGR614_V10:
-+	case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
-+		for (e = bcma_sflash_st_shrink_tbl; e->name; e++) {
-+			if (e->id == id)
-+				return e;
-+		}
-+		return NULL;
-+	default:
-+		return NULL;
-+	}
-+}
-+
- /* Initialize serial flash access */
- int bcma_sflash_init(struct bcma_drv_cc *cc)
- {
-@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc
- 		case 0x13:
- 			return -ENOTSUPP;
- 		default:
-+			e = bcma_sflash_shrink_flash(id);
-+			if (e)
-+				break;
-+
- 			for (e = bcma_sflash_st_tbl; e->name; e++) {
- 				if (e->id == id)
- 					break;
--- a/target/linux/bcm47xx/patches-4.14/820-wgt634u-nvram-fix.patch
+++ b/target/linux/bcm47xx/patches-4.14/820-wgt634u-nvram-fix.patch
@ -1,304 +0,0 @@
-The Netgear wgt634u uses a different format for storing the 
-configuration. This patch is needed to read out the correct 
-configuration. The cfe_env.c file uses a different method way to read 
-out the configuration than the in kernel cfe config reader.
-
--- a/drivers/firmware/broadcom/Makefile
-+++ b/drivers/firmware/broadcom/Makefile
-@@ -1,2 +1,2 @@
-obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o
-+obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o cfe_env.o
- obj-$(CONFIG_BCM47XX_SPROM)		+= bcm47xx_sprom.o
--- /dev/null
-+++ b/drivers/firmware/broadcom/cfe_env.c
-@@ -0,0 +1,228 @@
-+/*
-+ * CFE environment variable access
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * Copyright 2006, Felix Fietkau <nbd@nbd.name>
-+ * 
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <linux/uaccess.h>
-+
-+#define NVRAM_SIZE       (0x1ff0)
-+static char _nvdata[NVRAM_SIZE];
-+static char _valuestr[256];
-+
-+/*
-+ * TLV types.  These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ * 
-+ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
-+ * indicates the size of the length field.  
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS	0x00	/* for low bit */
-+#define ENV_LENGTH_8BITS	0x01
-+
-+#define ENV_TYPE_USER		0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END	0x00	
-+#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags 
-+ */
-+
-+#define ENV_FLG_NORMAL		0x00	/* normal read/write */
-+#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
-+#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
-+#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
-+
-+
-+/*  *********************************************************************
-+    *  _nvram_read(buffer,offset,length)
-+    *  
-+    *  Read data from the NVRAM device
-+    *  
-+    *  Input parameters: 
-+    *  	   buffer - destination buffer
-+    *  	   offset - offset of data to read
-+    *  	   length - number of bytes to read
-+    *  	   
-+    *  Return value:
-+    *  	   number of bytes read, or <0 if error occured
-+    ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+    int i;
-+    if (offset > NVRAM_SIZE)
-+	return -1; 
-+
-+    for ( i = 0; i < length; i++) {
-+	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+    }
-+    return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+	while (*dest && (cnt > 0)) {
-+	if (*dest == c) return (char *) dest;
-+	dest++;
-+	cnt--;
-+	}
-+	return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+
-+char *cfe_env_get(unsigned char *nv_buf, const char *name)
-+{
-+    int size;
-+    unsigned char *buffer;
-+    unsigned char *ptr;
-+    unsigned char *envval;
-+    unsigned int reclen;
-+    unsigned int rectype;
-+    int offset;
-+    int flg;
-+    
-+	if (!strcmp(name, "nvram_type"))
-+		return "cfe";
-+	
-+    size = NVRAM_SIZE;
-+    buffer = &_nvdata[0];
-+
-+    ptr = buffer;
-+    offset = 0;
-+
-+    /* Read the record type and length */
-+    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+	goto error;
-+    }
-+    
-+    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
-+
-+	/* Adjust pointer for TLV type */
-+	rectype = *(ptr);
-+	offset++;
-+	size--;
-+
-+	/* 
-+	 * Read the length.  It can be either 1 or 2 bytes
-+	 * depending on the code 
-+	 */
-+	if (rectype & ENV_LENGTH_8BITS) {
-+	    /* Read the record type and length - 8 bits */
-+	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+		goto error;
-+	    }
-+	    reclen = *(ptr);
-+	    size--;
-+	    offset++;
-+	}
-+	else {
-+	    /* Read the record type and length - 16 bits, MSB first */
-+	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+		goto error;
-+	    }
-+	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+	    size -= 2;
-+	    offset += 2;
-+	}
-+
-+	if (reclen > size)
-+	    break;	/* should not happen, bad NVRAM */
-+
-+	switch (rectype) {
-+	    case ENV_TLV_TYPE_ENV:
-+		/* Read the TLV data */
-+		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+		    goto error;
-+		flg = *ptr++;
-+		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+		if (envval) {
-+		    *envval++ = '\0';
-+		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0			
-+		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+		    if(!strcmp(ptr, name)){
-+			return _valuestr;
-+		    }
-+		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+			return _valuestr;
-+		}
-+		break;
-+		
-+	    default: 
-+		/* Unknown TLV type, skip it. */
-+		break;
-+	    }
-+
-+	/*
-+	 * Advance to next TLV 
-+	 */
-+		
-+	size -= (int)reclen;
-+	offset += reclen;
-+
-+	/* Read the next record type */
-+	ptr = buffer;
-+	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+	    goto error;
-+	}
-+
-+error:
-+    return NULL;
-+
-+}
-+
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -37,6 +37,8 @@ struct nvram_header {
- static char nvram_buf[NVRAM_SPACE];
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
- 
- static u32 find_nvram_size(void __iomem *end)
- {
-@@ -56,7 +58,9 @@ static u32 find_nvram_size(void __iomem
- static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
- {
- 	struct nvram_header __iomem *header;
-+	int i;
- 	u32 off;
-+	u32 *src, *dst;
- 	u32 size;
- 
- 	if (nvram_len) {
-@@ -64,6 +68,26 @@ static int nvram_find_and_copy(void __io
- 		return -EEXIST;
- 	}
- 
-+	cfe_env = 0;
-+
-+	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+	if (lim >= 8 * 1024 * 1024) {
-+		src = (u32 *)(iobase + 8 * 1024 * 1024 - 0x2000);
-+		dst = (u32 *)nvram_buf;
-+
-+		if ((*src & 0xff00ff) == 0x000001) {
-+			printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+			for (i = 0; i < 0x1ff0; i++) {
-+				if (*src == 0xFFFFFFFF)
-+					break;
-+				*dst++ = *src++;
-+			}
-+			cfe_env = 1;
-+			return 0;
-+		}
-+	}
-+
- 	/* TODO: when nvram is on nand flash check for bad blocks first. */
- 	off = FLASH_MIN;
- 	while (off <= lim) {
-@@ -174,6 +198,13 @@ int bcm47xx_nvram_getenv(const char *nam
- 	if (!name)
- 		return -EINVAL;
- 
-+	if (cfe_env) {
-+		value = cfe_env_get(nvram_buf, name);
-+		if (!value)
-+			return -ENOENT;
-+		return snprintf(val, val_len, "%s", value);
-+	}
-+
- 	if (!nvram_len) {
- 		err = nvram_init();
- 		if (err)
--- a/target/linux/bcm47xx/patches-4.14/830-huawei_e970_support.patch
+++ b/target/linux/bcm47xx/patches-4.14/830-huawei_e970_support.patch
@ -1,101 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -37,6 +37,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
-+#include <linux/old_gpio_wdt.h>
- #include <asm/bootinfo.h>
- #include <asm/idle.h>
- #include <asm/prom.h>
-@@ -225,6 +226,33 @@ static struct fixed_phy_status bcm47xx_f
- 	.duplex	= DUPLEX_FULL,
- };
- 
-+static struct gpio_wdt_platform_data gpio_wdt_data;
-+
-+static struct platform_device gpio_wdt_device = {
-+	.name			= "gpio-wdt",
-+	.id			= 0,
-+	.dev			= {
-+		.platform_data	= &gpio_wdt_data,
-+	},
-+};
-+
-+static int __init bcm47xx_register_gpio_watchdog(void)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+
-+	switch (board) {
-+	case BCM47XX_BOARD_HUAWEI_E970:
-+		pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
-+		gpio_wdt_data.gpio = 7;
-+		gpio_wdt_data.interval = HZ;
-+		gpio_wdt_data.first_interval = HZ / 5;
-+		return platform_device_register(&gpio_wdt_device);
-+	default:
-+		/* Nothing to do */
-+		return 0;
-+	}
-+}
-+
- static int __init bcm47xx_register_bus_complete(void)
- {
- 	switch (bcm47xx_bus_type) {
-@@ -244,6 +272,7 @@ static int __init bcm47xx_register_bus_c
- 	bcm47xx_workarounds();
- 
- 	fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1);
-+	bcm47xx_register_gpio_watchdog();
- 	return 0;
- }
- device_initcall(bcm47xx_register_bus_complete);
--- a/arch/mips/configs/bcm47xx_defconfig
-+++ b/arch/mips/configs/bcm47xx_defconfig
-@@ -66,6 +66,7 @@ CONFIG_HW_RANDOM=y
- CONFIG_GPIO_SYSFS=y
- CONFIG_WATCHDOG=y
- CONFIG_BCM47XX_WDT=y
-+CONFIG_GPIO_WDT=y
- CONFIG_SSB_DEBUG=y
- CONFIG_SSB_DRIVER_GIGE=y
- CONFIG_BCMA_DRIVER_GMAC_CMN=y
--- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
- }
- EXPORT_SYMBOL(ssb_watchdog_timer_set);
- 
-+#ifdef CONFIG_BCM47XX
-+#include <bcm47xx_board.h>
-+
-+static bool ssb_watchdog_supported(void)
-+{
-+	enum bcm47xx_board board = bcm47xx_board_get();
-+
-+	/* The Huawei E970 has a hardware watchdog using a GPIO */
-+	switch (board) {
-+	case BCM47XX_BOARD_HUAWEI_E970:
-+		return false;
-+	default:
-+		return true;
-+	}
-+}
-+#else
-+static bool ssb_watchdog_supported(void)
-+{
-+	return true;
-+}
-+#endif
-+
- int ssb_watchdog_register(struct ssb_bus *bus)
- {
- 	struct bcm47xx_wdt wdt = {};
- 	struct platform_device *pdev;
- 
-+	if (!ssb_watchdog_supported())
-+		return 0;
-+
- 	if (ssb_chipco_available(&bus->chipco)) {
- 		wdt.driver_data = &bus->chipco;
- 		wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
--- a/target/linux/bcm47xx/patches-4.14/831-old_gpio_wdt.patch
+++ b/target/linux/bcm47xx/patches-4.14/831-old_gpio_wdt.patch
@ -1,360 +0,0 @@
-This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
-
-Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
-
--- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1473,6 +1473,15 @@ config WDT_MTX1
- 	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
- 	  will reboot the machine after a 100 seconds timer expired.
- 
-+config GPIO_WDT
-+	tristate "GPIO Hardware Watchdog"
-+ 	help
-+	  Hardware driver for GPIO-controlled watchdogs. GPIO pin and
-+	  toggle interval settings are platform-specific. The driver
-+	  will stop toggling the GPIO (i.e. machine reboots) after a
-+	  100 second timer expired and no process has written to
-+	  /dev/watchdog during that time.
-+
- config PNX833X_WDT
- 	tristate "PNX833x Hardware Watchdog"
- 	depends on SOC_PNX8335
--- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -163,6 +163,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
-+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
--- /dev/null
-+++ b/drivers/watchdog/old_gpio_wdt.c
-@@ -0,0 +1,301 @@
-+/*
-+ *      Driver for GPIO-controlled Hardware Watchdogs.
-+ *
-+ *      Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ *      Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
-+ *
-+ *      (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
-+ *                              All Rights Reserved.
-+ *                              http://www.4g-systems.biz
-+ *
-+ *      (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ *      Neither Michael Stickel nor 4G Systems admit liability nor provide
-+ *      warranty for any of this software. This material is provided
-+ *      "AS-IS" and at no charge.
-+ *
-+ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
-+ *
-+ *      Release 0.01.
-+ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
-+ *
-+ *      Release 0.02.
-+ *      Author: Florian Fainelli florian@openwrt.org
-+ *              use the Linux watchdog/timer APIs
-+ *
-+ *      Release 0.03.
-+ *      Author: Mathias Adam <m.adam--linux@adamis.de>
-+ *              make it a generic gpio watchdog driver
-+ *
-+ *      The Watchdog is configured to reset the MTX-1
-+ *      if it is not triggered for 100 seconds.
-+ *      It should not be triggered more often than 1.6 seconds.
-+ *
-+ *      A timer triggers the watchdog every 5 seconds, until
-+ *      it is opened for the first time. After the first open
-+ *      it MUST be triggered every 2..95 seconds.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/timer.h>
-+#include <linux/completion.h>
-+#include <linux/jiffies.h>
-+#include <linux/watchdog.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/uaccess.h>
-+#include <linux/gpio.h>
-+#include <linux/old_gpio_wdt.h>
-+
-+static int ticks = 100 * HZ;
-+
-+static struct {
-+	struct completion stop;
-+	spinlock_t lock;
-+	int running;
-+	struct timer_list timer;
-+	int queue;
-+	int default_ticks;
-+	unsigned long inuse;
-+	unsigned gpio;
-+	unsigned int gstate;
-+	int interval;
-+	int first_interval;
-+} gpio_wdt_device;
-+
-+static void gpio_wdt_trigger(unsigned long unused)
-+{
-+	spin_lock(&gpio_wdt_device.lock);
-+	if (gpio_wdt_device.running && ticks > 0)
-+		ticks -= gpio_wdt_device.interval;
-+
-+	/* toggle wdt gpio */
-+	gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
-+	gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
-+
-+	if (gpio_wdt_device.queue && ticks > 0)
-+		mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
-+	else
-+		complete(&gpio_wdt_device.stop);
-+	spin_unlock(&gpio_wdt_device.lock);
-+}
-+
-+static void gpio_wdt_reset(void)
-+{
-+	ticks = gpio_wdt_device.default_ticks;
-+}
-+
-+
-+static void gpio_wdt_start(void)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+	if (!gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 1;
-+		gpio_wdt_device.gstate = 1;
-+		gpio_set_value(gpio_wdt_device.gpio, 1);
-+		mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
-+	}
-+	gpio_wdt_device.running++;
-+	spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+}
-+
-+static int gpio_wdt_stop(void)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+	if (gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 0;
-+		gpio_wdt_device.gstate = 0;
-+		gpio_set_value(gpio_wdt_device.gpio, 0);
-+	}
-+	ticks = gpio_wdt_device.default_ticks;
-+	spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+	return 0;
-+}
-+
-+/* Filesystem functions */
-+
-+static int gpio_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(0, &gpio_wdt_device.inuse))
-+		return -EBUSY;
-+	return nonseekable_open(inode, file);
-+}
-+
-+
-+static int gpio_wdt_release(struct inode *inode, struct file *file)
-+{
-+	clear_bit(0, &gpio_wdt_device.inuse);
-+	return 0;
-+}
-+
-+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
-+							unsigned long arg)
-+{
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = (int __user *)argp;
-+	unsigned int value;
-+	static const struct watchdog_info ident = {
-+		.options = WDIOF_CARDRESET,
-+		.identity = "GPIO WDT",
-+	};
-+
-+	switch (cmd) {
-+	case WDIOC_GETSUPPORT:
-+		if (copy_to_user(argp, &ident, sizeof(ident)))
-+			return -EFAULT;
-+		break;
-+	case WDIOC_GETSTATUS:
-+	case WDIOC_GETBOOTSTATUS:
-+		put_user(0, p);
-+		break;
-+	case WDIOC_SETOPTIONS:
-+		if (get_user(value, p))
-+			return -EFAULT;
-+		if (value & WDIOS_ENABLECARD)
-+			gpio_wdt_start();
-+		else if (value & WDIOS_DISABLECARD)
-+			gpio_wdt_stop();
-+		else
-+			return -EINVAL;
-+		return 0;
-+	case WDIOC_KEEPALIVE:
-+		gpio_wdt_reset();
-+		break;
-+	default:
-+		return -ENOTTY;
-+	}
-+	return 0;
-+}
-+
-+
-+static ssize_t gpio_wdt_write(struct file *file, const char *buf,
-+						size_t count, loff_t *ppos)
-+{
-+	if (!count)
-+		return -EIO;
-+	gpio_wdt_reset();
-+	return count;
-+}
-+
-+static const struct file_operations gpio_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.unlocked_ioctl	= gpio_wdt_ioctl,
-+	.open		= gpio_wdt_open,
-+	.write		= gpio_wdt_write,
-+	.release	= gpio_wdt_release,
-+};
-+
-+
-+static struct miscdevice gpio_wdt_misc = {
-+	.minor	= WATCHDOG_MINOR,
-+	.name	= "watchdog",
-+	.fops	= &gpio_wdt_fops,
-+};
-+
-+
-+static int gpio_wdt_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+	struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
-+
-+	gpio_wdt_device.gpio = gpio_wdt_data->gpio;
-+	gpio_wdt_device.interval = gpio_wdt_data->interval;
-+	gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
-+	if (gpio_wdt_device.first_interval <= 0) {
-+		gpio_wdt_device.first_interval = gpio_wdt_device.interval;
-+	}
-+
-+	ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "failed to request gpio");
-+		return ret;
-+	}
-+
-+	spin_lock_init(&gpio_wdt_device.lock);
-+	init_completion(&gpio_wdt_device.stop);
-+	gpio_wdt_device.queue = 0;
-+	clear_bit(0, &gpio_wdt_device.inuse);
-+	setup_timer(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
-+	gpio_wdt_device.default_ticks = ticks;
-+
-+	gpio_wdt_start();
-+	dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
-+		gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
-+	return 0;
-+}
-+
-+static int gpio_wdt_remove(struct platform_device *pdev)
-+{
-+	/* FIXME: do we need to lock this test ? */
-+	if (gpio_wdt_device.queue) {
-+		gpio_wdt_device.queue = 0;
-+		wait_for_completion(&gpio_wdt_device.stop);
-+	}
-+
-+	gpio_free(gpio_wdt_device.gpio);
-+	misc_deregister(&gpio_wdt_misc);
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_wdt_driver = {
-+	.probe = gpio_wdt_probe,
-+	.remove = gpio_wdt_remove,
-+	.driver.name = "gpio-wdt",
-+	.driver.owner = THIS_MODULE,
-+};
-+
-+static int __init gpio_wdt_init(void)
-+{
-+	return platform_driver_register(&gpio_wdt_driver);
-+}
-+arch_initcall(gpio_wdt_init);
-+
-+/*
-+ * We do wdt initialization in two steps: arch_initcall probes the wdt
-+ * very early to start pinging the watchdog (misc devices are not yet
-+ * available), and later module_init() just registers the misc device.
-+ */
-+static int gpio_wdt_init_late(void)
-+{
-+	int ret;
-+
-+	ret = misc_register(&gpio_wdt_misc);
-+	if (ret < 0) {
-+		pr_err("GPIO_WDT: failed to register misc device\n");
-+		return ret;
-+	}
-+	return 0;
-+}
-+#ifndef MODULE
-+module_init(gpio_wdt_init_late);
-+#endif
-+
-+static void __exit gpio_wdt_exit(void)
-+{
-+	platform_driver_unregister(&gpio_wdt_driver);
-+}
-+module_exit(gpio_wdt_exit);
-+
-+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
-+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:gpio-wdt");
--- /dev/null
-+++ b/include/linux/old_gpio_wdt.h
-@@ -0,0 +1,21 @@
-+/*
-+ *  Definitions for the GPIO watchdog driver
-+ *
-+ *  Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef _GPIO_WDT_H_
-+#define _GPIO_WDT_H_
-+
-+struct gpio_wdt_platform_data {
-+	int	gpio;		/* GPIO line number */
-+	int	interval;	/* watchdog reset interval in system ticks */
-+	int	first_interval;	/* first wd reset interval in system ticks */
-+};
-+
-+#endif /* _GPIO_WDT_H_ */
--- a/target/linux/bcm47xx/patches-4.14/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
+++ b/target/linux/bcm47xx/patches-4.14/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
@ -1,30 +0,0 @@
-From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 8 Apr 2015 06:58:11 +0200
-Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-If SoC has a CardBus we can set resources of device at slot 1 only. It's
-impossigle to set bridge resources as it simply overwrites device 1
-configuration and usually results in Data bus error-s.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
- drivers/ssb/driver_pcicore.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
--- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc
- 	SSB_WARN_ON(!pc->hostmode);
- 	if (unlikely(len != 1 && len != 2 && len != 4))
- 		goto out;
-+	/* CardBus SoCs allow configuring dev 1 resources only */
-+	if (extpci_core->cardbusmode && dev != 1 &&
-+	    off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5)
-+		goto out;
- 	addr = get_cfgspace_addr(pc, bus, dev, func, off);
- 	if (unlikely(!addr))
- 		goto out;
--- a/target/linux/bcm47xx/patches-4.14/901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch
+++ b/target/linux/bcm47xx/patches-4.14/901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch
@ -1,233 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 18 Dec 2015 07:51:08 +0100
-Subject: [PATCH] Revert "bcma: switch GPIO portions to use GPIOLIB_IRQCHIP"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit 74f4e0cc61080f63f28e8d519bdf437957e64217.
-
-On BCM47XX (MIPS) bcma_bus_get_host_dev returns NULL which results in:
-[    0.157054] missing gpiochip .dev parent pointer
-[    0.157287] bcma: bus0: Error registering GPIO driver: -22
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
- drivers/bcma/Kconfig                        |  2 +-
- drivers/bcma/driver_gpio.c                  | 92 +++++++++++++++++++----------
- include/linux/bcma/bcma_driver_chipcommon.h |  1 +
- 3 files changed, 64 insertions(+), 31 deletions(-)
-
--- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -104,7 +104,7 @@ config BCMA_DRIVER_GMAC_CMN
- config BCMA_DRIVER_GPIO
- 	bool "BCMA GPIO driver"
- 	depends on BCMA && GPIOLIB
-	select GPIOLIB_IRQCHIP if BCMA_HOST_SOC
-+	select IRQ_DOMAIN if BCMA_HOST_SOC
- 	help
- 	  Driver to provide access to the GPIO pins of the bcma bus.
- 
--- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -8,8 +8,10 @@
-  * Licensed under the GNU/GPL. See COPYING for details.
-  */
- 
-#include <linux/gpio/driver.h>
-+#include <linux/gpio.h>
-+#include <linux/irq.h>
- #include <linux/interrupt.h>
-+#include <linux/irqdomain.h>
- #include <linux/export.h>
- #include <linux/bcma/bcma.h>
- 
-@@ -72,11 +74,19 @@ static void bcma_gpio_free(struct gpio_c
- }
- 
- #if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
-+static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+	struct bcma_drv_cc *cc = gpiochip_get_data(chip);
-+
-+	if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
-+		return irq_find_mapping(cc->irq_domain, gpio);
-+	else
-+		return -EINVAL;
-+}
- 
- static void bcma_gpio_irq_unmask(struct irq_data *d)
- {
-	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct bcma_drv_cc *cc = gpiochip_get_data(gc);
-+	struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
- 	int gpio = irqd_to_hwirq(d);
- 	u32 val = bcma_chipco_gpio_in(cc, BIT(gpio));
- 
-@@ -86,8 +96,7 @@ static void bcma_gpio_irq_unmask(struct
- 
- static void bcma_gpio_irq_mask(struct irq_data *d)
- {
-	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct bcma_drv_cc *cc = gpiochip_get_data(gc);
-+	struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
- 	int gpio = irqd_to_hwirq(d);
- 
- 	bcma_chipco_gpio_intmask(cc, BIT(gpio), 0);
-@@ -102,7 +111,6 @@ static struct irq_chip bcma_gpio_irq_chi
- static irqreturn_t bcma_gpio_irq_handler(int irq, void *dev_id)
- {
- 	struct bcma_drv_cc *cc = dev_id;
-	struct gpio_chip *gc = &cc->gpio;
- 	u32 val = bcma_cc_read32(cc, BCMA_CC_GPIOIN);
- 	u32 mask = bcma_cc_read32(cc, BCMA_CC_GPIOIRQ);
- 	u32 pol = bcma_cc_read32(cc, BCMA_CC_GPIOPOL);
-@@ -112,58 +120,81 @@ static irqreturn_t bcma_gpio_irq_handler
- 	if (!irqs)
- 		return IRQ_NONE;
- 
-	for_each_set_bit(gpio, &irqs, gc->ngpio)
-		generic_handle_irq(irq_find_mapping(gc->irqdomain, gpio));
-+	for_each_set_bit(gpio, &irqs, cc->gpio.ngpio)
-+		generic_handle_irq(bcma_gpio_to_irq(&cc->gpio, gpio));
- 	bcma_chipco_gpio_polarity(cc, irqs, val & irqs);
- 
- 	return IRQ_HANDLED;
- }
- 
-static int bcma_gpio_irq_init(struct bcma_drv_cc *cc)
-+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
- {
- 	struct gpio_chip *chip = &cc->gpio;
-	int hwirq, err;
-+	int gpio, hwirq, err;
- 
- 	if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
- 		return 0;
- 
-+	cc->irq_domain = irq_domain_add_linear(NULL, chip->ngpio,
-+					       &irq_domain_simple_ops, cc);
-+	if (!cc->irq_domain) {
-+		err = -ENODEV;
-+		goto err_irq_domain;
-+	}
-+	for (gpio = 0; gpio < chip->ngpio; gpio++) {
-+		int irq = irq_create_mapping(cc->irq_domain, gpio);
-+
-+		irq_set_chip_data(irq, cc);
-+		irq_set_chip_and_handler(irq, &bcma_gpio_irq_chip,
-+					 handle_simple_irq);
-+	}
-+
- 	hwirq = bcma_core_irq(cc->core, 0);
- 	err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
- 			  cc);
- 	if (err)
-		return err;
-+		goto err_req_irq;
- 
- 	bcma_chipco_gpio_intmask(cc, ~0, 0);
- 	bcma_cc_set32(cc, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO);
- 
-	err =  gpiochip_irqchip_add(chip,
-				    &bcma_gpio_irq_chip,
-				    0,
-				    handle_simple_irq,
-				    IRQ_TYPE_NONE);
-	if (err) {
-		free_irq(hwirq, cc);
-		return err;
-	}
-
- 	return 0;
-+
-+err_req_irq:
-+	for (gpio = 0; gpio < chip->ngpio; gpio++) {
-+		int irq = irq_find_mapping(cc->irq_domain, gpio);
-+
-+		irq_dispose_mapping(irq);
-+	}
-+	irq_domain_remove(cc->irq_domain);
-+err_irq_domain:
-+	return err;
- }
- 
-static void bcma_gpio_irq_exit(struct bcma_drv_cc *cc)
-+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
- {
-+	struct gpio_chip *chip = &cc->gpio;
-+	int gpio;
-+
- 	if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
- 		return;
- 
- 	bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
- 	free_irq(bcma_core_irq(cc->core, 0), cc);
-+	for (gpio = 0; gpio < chip->ngpio; gpio++) {
-+		int irq = irq_find_mapping(cc->irq_domain, gpio);
-+
-+		irq_dispose_mapping(irq);
-+	}
-+	irq_domain_remove(cc->irq_domain);
- }
- #else
-static int bcma_gpio_irq_init(struct bcma_drv_cc *cc)
-+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
- {
- 	return 0;
- }
- 
-static void bcma_gpio_irq_exit(struct bcma_drv_cc *cc)
-+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
- {
- }
- #endif
-@@ -182,8 +213,9 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- 	chip->set		= bcma_gpio_set_value;
- 	chip->direction_input	= bcma_gpio_direction_input;
- 	chip->direction_output	= bcma_gpio_direction_output;
-	chip->owner		= THIS_MODULE;
-	chip->parent		= bus->dev;
-+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
-+	chip->to_irq		= bcma_gpio_to_irq;
-+#endif
- #if IS_BUILTIN(CONFIG_OF)
- 	chip->of_node		= cc->core->dev.of_node;
- #endif
-@@ -212,13 +244,13 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- 	else
- 		chip->base		= -1;
- 
-	err = gpiochip_add_data(chip, cc);
-+	err = bcma_gpio_irq_domain_init(cc);
- 	if (err)
- 		return err;
- 
-	err = bcma_gpio_irq_init(cc);
-+	err = gpiochip_add_data(chip, cc);
- 	if (err) {
-		gpiochip_remove(chip);
-+		bcma_gpio_irq_domain_exit(cc);
- 		return err;
- 	}
- 
-@@ -227,7 +259,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- 
- int bcma_gpio_unregister(struct bcma_drv_cc *cc)
- {
-	bcma_gpio_irq_exit(cc);
-+	bcma_gpio_irq_domain_exit(cc);
- 	gpiochip_remove(&cc->gpio);
- 	return 0;
- }
--- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -645,6 +645,7 @@ struct bcma_drv_cc {
- 	spinlock_t gpio_lock;
- #ifdef CONFIG_BCMA_DRIVER_GPIO
- 	struct gpio_chip gpio;
-+	struct irq_domain *irq_domain;
- #endif
- };
- 
--- a/target/linux/bcm47xx/patches-4.14/940-bcm47xx-yenta.patch
+++ b/target/linux/bcm47xx/patches-4.14/940-bcm47xx-yenta.patch
@ -1,46 +0,0 @@
--- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
- 	 * Probe for usable interrupts using the force
- 	 * register to generate bogus card status events.
- 	 */
-+#ifndef CONFIG_BCM47XX
-+	/* WRT54G3G does not like this */
- 	cb_writel(socket, CB_SOCKET_EVENT, -1);
- 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- 	reg = exca_readb(socket, I365_CSCINT);
-@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
- 	}
- 	cb_writel(socket, CB_SOCKET_MASK, 0);
- 	exca_writeb(socket, I365_CSCINT, reg);
-+#endif
- 
- 	mask = probe_irq_mask(val) & 0xffff;
- 
-@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
- 	else
- 		socket->socket.irq_mask = 0;
- 
-+	/* irq mask probing is broken for the WRT54G3G */
-+	if (socket->socket.irq_mask == 0)
-+		socket->socket.irq_mask = 0x6f8;
-+
- 	dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
- 		 socket->socket.irq_mask, socket->cb_irq);
- }
-@@ -1251,6 +1258,15 @@ static int yenta_probe(struct pci_dev *d
- 	dev_info(&dev->dev, "Socket status: %08x\n",
- 		 cb_readl(socket, CB_SOCKET_STATE));
- 
-+	/* Generate an interrupt on card insert/remove */
-+	config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+	/* Set up Multifunction Routing Status Register */
-+	config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+	/* Switch interrupts to parallelized */
-+	config_writeb(socket, 0x92, 0x64);
-+
- 	yenta_fixup_parent_bridge(dev->subordinate);
- 
- 	/* Register it with the pcmcia layer.. */
--- a/target/linux/bcm47xx/patches-4.14/976-ssb_increase_pci_delay.patch
+++ b/target/linux/bcm47xx/patches-4.14/976-ssb_increase_pci_delay.patch
@ -1,11 +0,0 @@
--- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -389,7 +389,7 @@ static void ssb_pcicore_init_hostmode(st
- 	set_io_port_base(ssb_pcicore_controller.io_map_base);
- 	/* Give some time to the PCI controller to configure itself with the new
- 	 * values. Not waiting at this point causes crashes of the machine. */
-	mdelay(10);
-+	mdelay(300);
- 	register_pci_controller(&ssb_pcicore_controller);
- }
- 
--- a/target/linux/bcm47xx/patches-4.14/999-wl_exports.patch
+++ b/target/linux/bcm47xx/patches-4.14/999-wl_exports.patch
@ -1,22 +0,0 @@
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -34,7 +34,8 @@ struct nvram_header {
- 	u32 config_ncdl;	/* ncdl values for memc */
- };
- 
-static char nvram_buf[NVRAM_SPACE];
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
- static int cfe_env;
--- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- 
- #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
-