mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
mt76: update to Git HEAD (2023-12-08)
890ae4d717f1 wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling
fcc2f3d82bc9 wifi: mt76: fix lock dependency problem for wed_lock
77cc14596202 wifi: mt76: mt792x: move mt7921_skb_add_usb_sdio_hdr in mt792x module
bc85355885d1 wifi: mt76: mt792x: move some common usb code in mt792x module
c27f01c4c834 wifi: mt76: mt7996: get tx_retries and tx_failed from txfree
30aba4c18307 wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic
119bebff244b wifi: mt76: mt7996: enable PPDU-TxS to host
a4005e0e83e7 wifi: mt76: mt7996: remove periodic MPDU TXS request
d6cc20bf5913 wifi: mt76: reduce spin_lock_bh held up in mt76_dma_rx_cleanup
5d94251d641c wifi: mt76: mt7921: move connac nic capability handling to mt7921
266341b5019d wifi: mt76: mt7921: enable set txpower for UNII-4
581449ac5274 wifi: mt76: mt7921: add 6GHz power type support for clc
9bfd669e9477 wifi: mt76: mt7921: get regulatory information from the clc event
4a0f839da0f1 wifi: mt76: mt7921: update the channel usage when the regd domain changed
f4df423d3d56 wifi: mt76: add ability to explicitly forbid LED registration with DT
54d369e79972 wifi: mt76: mt7921: support 5.9/6GHz channel config in acpi
b39b6cba220f wifi: mt76: mt7996: fix uninitialized variable in parsing txfree
77194e652885 wifi: mt76: fix typo in mt76_get_of_eeprom_from_nvmem function
c37738fc9097 wifi: mt76: limit support of precal loading for mt7915 to MTD only
d6e8aa634a19 wifi: mt76: make mt76_get_of_eeprom static again
d1c671a90eba wifi: mt76: permit to use alternative cell name to eeprom NVMEM load
5539001fe4e3 wifi: mt76: permit to load precal from NVMEM cell for mt7915
48d413380685 wifi: mt76: Remove unnecessary (void*) conversions
ea2814289147 wifi: mt76: mmio: move mt76_mmio_wed_{init,release}_rx_buf in common code
9fb0277d7ee8 wifi: mt76: move mt76_mmio_wed_offload_{enable,disable} in common code
4b47145ecf44 wifi: mt76: move mt76_net_setup_tc in common code
d798d5d6f770 wifi: mt76: introduce mt76_queue_is_wed_tx_free utility routine
48b0cedbf83f wifi: mt76: introduce wed pointer in mt76_queue
c550204e347d wifi: mt76: increase MT_QFLAG_WED_TYPE size
2e7f30f22cfd wifi: mt76: mt7996: add wed tx support
ec8765a02fc8 wifi: mt76: dma: introduce __mt76_dma_queue_reset utility routine
a469aaac9784 wifi: mt76: mt7996: use u16 for val field in mt7996_mcu_set_rro signature
abca260a15c4 wifi: mt76: mt7996: add wed rx support
be2e74c0c495 wifi: mt76: move wed reset common code in mt76 module
7f17e164fbb4 wifi: mt76: mt7996: add wed reset support
0f89bf58efda wifi: mt76: mt7996: add wed rro delete session garbage collector
a58b75f863ca wifi: mt76: mt7915: fallback to non-wed mode if platform_get_resource fails in mt7915_mmio_wed_init()
36d2ddd94eeb wifi: mt76: mt7996: add support for variants with auxiliary RX path
cec7720c9341 wifi: mt76: mt7996: add TX statistics for EHT mode in debugfs
9852093062e8 wifi: mt76: connac: add thermal protection support for mt7996
955540a4df74 wifi: mt76: mt7996: add thermal sensor device support
af41374a3b8e wifi: mt76: connac: add beacon duplicate TX mode support for mt7996
3c98d7b7fa23 wifi: mt76: mt7996: fix the size of struct bss_rate_tlv
ee2169c00539 wifi: mt76: mt7996: adjust WFDMA settings to improve performance
0aead5de68a7 wifi: mt76: connac: set fixed_bw bit in TX descriptor for fixed rate frames
ab5580ff5a4f wifi: mt76: mt7996: handle IEEE80211_RC_SMPS_CHANGED
eed234afed7e wifi: mt76: mt7996: align the format of fixed rate command
d9a855285b95 wifi: mt76: mt7996: fix rate usage of inband discovery frames
47799aefe263 wifi: mt76: change txpower init to per-phy
264e1ecfe1b4 wifi: mt76: mt7996: add txpower setting support
c7b243b127eb wifi: mt76: use chainmask for power delta calculation
05f433900a02 wifi: mt76: mt7996: switch to mcu command for TX GI report
ae963198e605 wifi: mt76: mt7996: fix alignment of sta info event
d0d2e03591d6 wifi: mt76: mt7996: rework ampdu params setting
e87f4efc7638 wifi: mt76: connac: add beacon protection support for mt7996
0dfcc53a8e5d wifi: mt76: connac: fix EHT phy mode check
30c54a53bf8b wifi: mt76: mt7915: fix EEPROM offset of TSSI flag on MT7981
17297c97b737 wifi: mt76: mt7915: also MT7981 is 3T3R but nss2 on 5 GHz band
eeb48c081034 wifi: mt76: mt7996: fix mt7996_mcu_all_sta_info_event struct packing
b74ad922659c wifi: mt76: mt7996: introduce mt7996_band_valid()
51cb541c1e53 wifi: mt76: connac: add firmware support for mt7992
c0eda4d96ec8 wifi: mt76: mt7996: add DMA support for mt7992
f12471968a53 wifi: mt76: mt7996: rework register offsets for mt7992
8d11dae73eb8 wifi: mt76: mt7996: support mt7992 eeprom loading
6c2b2c37abd7 wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992
df1d3b3c67e5 wifi: mt76: connac: add new definition of tx descriptor
f997e759cea5 wifi: mt76: mt7996: add PCI IDs for mt7992
94e3632e4e93 wifi: mt76: mt7925: remove iftype from mt7925_init_eht_caps signature
9c7b98c03173 net: ethernet: mtk_wed: rename mtk_rxbm_desc in mtk_wed_bm_desc
4423b4eb69fb wifi: mt76: mt7996: fix endianness in mt7996_mcu_wed_rro_event
b97d899a7907 wifi: mt76: mt7921: fix kernel panic by accessing invalid 6GHz channel info
9ef06028d4fe wifi: mt76: mt7921s: fix workqueue problem causes STA association fail
95c14207d2a9 wifi: mt76: mt7996: set DMA mask to 36 bits for boards with more than 4GB of RAM
dbea5151412b wifi: mt76: mt7921: reduce the size of MCU firmware download Rx queue
a84a355d2e0a wifi: mt76: mt7921: fix country count limitation for CLC
c498f27ad075 wifi: mt76: mt7921: fix CLC command timeout when suspend/resume
3098d968abe4 wifi: mt76: mt7921: fix wrong 6Ghz power type
7730fc91dd15 wifi: mt76: fix shift overflow warnings on 32 bit systems
f559adf1849c wifi: mt76: fix crash with WED rx support enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 8f782ed07d)
[rmilecki: add patches/fixes for regressions from this commit]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
This commit is contained in:
Felix Fietkau
Rafał Miłecki
parent
5c4c9ae059
commit
06be957f86
@ -8,9 +8,9 @@ PKG_LICENSE_FILES:=
|
||||
|
||||
PKG_SOURCE_URL:=https://github.com/openwrt/mt76
|
||||
PKG_SOURCE_PROTO:=git
|
||||
PKG_SOURCE_DATE:=2023-09-18
|
||||
PKG_SOURCE_VERSION:=2afc7285f75dca5a0583fd917285bf33f1429cc6
|
||||
PKG_MIRROR_HASH:=2c9556b298246277ac2d65415e4449f98e6d5fdb99e0d0a92262f162df772bbc
|
||||
PKG_SOURCE_DATE:=2023-12-08
|
||||
PKG_SOURCE_VERSION:=f559adf1849c8af91f5a5eb670f4ed2c24988898
|
||||
PKG_MIRROR_HASH:=74dde4478442d5f0edbae918636b40767b0e49181b732d4184feeccd8a8cc328
|
||||
|
||||
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
|
||||
PKG_USE_NINJA:=0
|
||||
@ -318,7 +318,7 @@ endef
|
||||
define KernelPackage/mt7996e
|
||||
$(KernelPackage/mt76-default)
|
||||
TITLE:=MediaTek MT7996E wireless driver
|
||||
DEPENDS+=@PCI_SUPPORT +kmod-mt76-connac
|
||||
DEPENDS+=@PCI_SUPPORT +kmod-mt76-connac +kmod-hwmon-core
|
||||
FILES:= $(PKG_BUILD_DIR)/mt7996/mt7996e.ko
|
||||
AUTOLOAD:=$(call AutoProbe,mt7996e)
|
||||
endef
|
||||
|
||||
@ -1,24 +0,0 @@
|
||||
From 9c7b98c03173a1a201d74203a81b344a0cd637ac Mon Sep 17 00:00:00 2001
|
||||
From: Lorenzo Bianconi <lorenzo@kernel.org>
|
||||
Date: Mon, 18 Sep 2023 12:29:07 +0200
|
||||
Subject: [PATCH] net: ethernet: mtk_wed: rename mtk_rxbm_desc in
|
||||
mtk_wed_bm_desc
|
||||
|
||||
Rename mtk_rxbm_desc structure in mtk_wed_bm_desc since it will be used
|
||||
even on tx side by MT7988 SoC.
|
||||
|
||||
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
|
||||
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||||
---
|
||||
|
||||
--- a/mt7915/mmio.c
|
||||
+++ b/mt7915/mmio.c
|
||||
@@ -591,7 +591,7 @@ static void mt7915_mmio_wed_release_rx_b
|
||||
|
||||
static u32 mt7915_mmio_wed_init_rx_buf(struct mtk_wed_device *wed, int size)
|
||||
{
|
||||
- struct mtk_rxbm_desc *desc = wed->rx_buf_ring.desc;
|
||||
+ struct mtk_wed_bm_desc *desc = wed->rx_buf_ring.desc;
|
||||
struct mt76_txwi_cache *t = NULL;
|
||||
struct mt7915_dev *dev;
|
||||
struct mt76_queue *q;
|
||||
@ -0,0 +1,34 @@
|
||||
From f63f87cd5b45c3779293e6062c6b26bdf57e851d Mon Sep 17 00:00:00 2001
|
||||
From: Christian Marangi <ansuelsmth@gmail.com>
|
||||
Date: Sat, 9 Dec 2023 22:44:57 +0100
|
||||
Subject: [PATCH] wifi: mt76: mt7996: fix shift overflow warning on 32 bit
|
||||
systems
|
||||
|
||||
Fix additional shift overflow warning on 32 bit systems for mt7996 mac.c
|
||||
source.
|
||||
|
||||
Fixes: 95c14207d2a9 ("wifi: mt76: mt7996: set DMA mask to 36 bits for boards with more than 4GB of RAM")
|
||||
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
||||
---
|
||||
mt7996/mac.c | 10 +++++++---
|
||||
1 file changed, 7 insertions(+), 3 deletions(-)
|
||||
|
||||
--- a/mt7996/mac.c
|
||||
+++ b/mt7996/mac.c
|
||||
@@ -942,9 +942,13 @@ int mt7996_tx_prepare_skb(struct mt76_de
|
||||
|
||||
txp = (struct mt76_connac_txp_common *)(txwi + MT_TXD_SIZE);
|
||||
for (i = 0; i < nbuf; i++) {
|
||||
- u16 len = FIELD_PREP(MT_TXP_BUF_LEN, tx_info->buf[i + 1].len) |
|
||||
- FIELD_PREP(MT_TXP_DMA_ADDR_H,
|
||||
- tx_info->buf[i + 1].addr >> 32);
|
||||
+ u16 len;
|
||||
+
|
||||
+ len = FIELD_PREP(MT_TXP_BUF_LEN, tx_info->buf[i + 1].len);
|
||||
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
|
||||
+ len |= FIELD_PREP(MT_TXP_DMA_ADDR_H,
|
||||
+ tx_info->buf[i + 1].addr >> 32);
|
||||
+#endif
|
||||
|
||||
txp->fw.buf[i] = cpu_to_le32(tx_info->buf[i + 1].addr);
|
||||
txp->fw.len[i] = cpu_to_le16(len);
|
||||
@ -0,0 +1,31 @@
|
||||
From bebd9cffc2aeb2cecb40aadbb8c6eab3bdf7971b Mon Sep 17 00:00:00 2001
|
||||
From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
|
||||
Date: Mon, 30 Oct 2023 15:17:34 +0800
|
||||
Subject: [PATCH] wifi: mt76: mt7921: fix 6GHz disabled by the missing default
|
||||
CLC config
|
||||
|
||||
No matter CLC is enabled or disabled, the driver should initialize
|
||||
the default value 0xff for channel configuration of CLC. Otherwise,
|
||||
the zero value would disable channels.
|
||||
|
||||
Reported-and-tested-by: Ben Greear <greearb@candelatech.com>
|
||||
Closes: https://lore.kernel.org/all/2fb78387-d226-3193-8ca7-90040561b9ad@candelatech.com/
|
||||
Fixes: 09382d8f8641 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed")
|
||||
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
|
||||
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
|
||||
Signed-off-by: Kalle Valo <kvalo@kernel.org>
|
||||
Link: https://lore.kernel.org/r/5a976ddf1f636b5cb809373501d3cfdc6d8de3e4.1698648737.git.deren.wu@mediatek.com
|
||||
---
|
||||
mt7921/mcu.c | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
|
||||
--- a/mt7921/mcu.c
|
||||
+++ b/mt7921/mcu.c
|
||||
@@ -375,6 +375,7 @@ static int mt7921_load_clc(struct mt792x
|
||||
int ret, i, len, offset = 0;
|
||||
u8 *clc_base = NULL, hw_encap = 0;
|
||||
|
||||
+ dev->phy.clc_chan_conf = 0xff;
|
||||
if (mt7921_disable_clc ||
|
||||
mt76_is_usb(&dev->mt76))
|
||||
return 0;
|
||||
@ -0,0 +1,26 @@
|
||||
From 786a339bac36d8e53eb8b540e79221d20011ab2a Mon Sep 17 00:00:00 2001
|
||||
From: Felix Fietkau <nbd@nbd.name>
|
||||
Date: Sat, 3 Feb 2024 14:21:58 +0100
|
||||
Subject: [PATCH] wifi: mt76: mt7996: fix fortify warning
|
||||
|
||||
Copy cck and ofdm separately in order to avoid __read_overflow2_field
|
||||
warning.
|
||||
|
||||
Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support")
|
||||
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
---
|
||||
mt7996/mcu.c | 3 ++-
|
||||
1 file changed, 2 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/mt7996/mcu.c
|
||||
+++ b/mt7996/mcu.c
|
||||
@@ -4477,7 +4477,8 @@ int mt7996_mcu_set_txpower_sku(struct mt
|
||||
|
||||
skb_put_data(skb, &req, sizeof(req));
|
||||
/* cck and ofdm */
|
||||
- skb_put_data(skb, &la.cck, sizeof(la.cck) + sizeof(la.ofdm));
|
||||
+ skb_put_data(skb, &la.cck, sizeof(la.cck));
|
||||
+ skb_put_data(skb, &la.ofdm, sizeof(la.ofdm));
|
||||
/* ht20 */
|
||||
skb_put_data(skb, &la.mcs[0], 8);
|
||||
/* ht40 */
|
||||
@ -0,0 +1,38 @@
|
||||
From bc37a7ebc267e400fc4e9886b7197b4b866763d1 Mon Sep 17 00:00:00 2001
|
||||
From: Lorenzo Bianconi <lorenzo@kernel.org>
|
||||
Date: Thu, 21 Dec 2023 10:41:18 +0100
|
||||
Subject: [PATCH] wifi: mt76: mt7996: fix fw loading timeout
|
||||
|
||||
Fix the following firmware loading error due to a wrong dma register
|
||||
configuration if wed is disabled.
|
||||
|
||||
[ 8.245881] mt7996e_hif 0001:01:00.0: assign IRQ: got 128
|
||||
[ 8.251308] mt7996e_hif 0001:01:00.0: enabling device (0000 -> 0002)
|
||||
[ 8.257674] mt7996e_hif 0001:01:00.0: enabling bus mastering
|
||||
[ 8.263488] mt7996e 0000:01:00.0: assign IRQ: got 126
|
||||
[ 8.268537] mt7996e 0000:01:00.0: enabling device (0000 -> 0002)
|
||||
[ 8.274551] mt7996e 0000:01:00.0: enabling bus mastering
|
||||
[ 28.648773] mt7996e 0000:01:00.0: Message 00000010 (seq 1) timeout
|
||||
[ 28.654959] mt7996e 0000:01:00.0: Failed to get patch semaphore
|
||||
[ 29.661033] mt7996e: probe of 0000:01:00.0 failed with error -11
|
||||
|
||||
Suggested-by: Sujuan Chen" <sujuan.chen@mediatek.com>
|
||||
Fixes: 4920a3a1285f ("wifi: mt76: mt7996: set DMA mask to 36 bits for boards with more than 4GB of RAM")
|
||||
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
|
||||
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
---
|
||||
mt7996/dma.c | 3 ++-
|
||||
1 file changed, 2 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/mt7996/dma.c
|
||||
+++ b/mt7996/dma.c
|
||||
@@ -237,7 +237,8 @@ void mt7996_dma_start(struct mt7996_dev
|
||||
MT_WFDMA0_GLO_CFG_TX_DMA_EN |
|
||||
MT_WFDMA0_GLO_CFG_RX_DMA_EN |
|
||||
MT_WFDMA0_GLO_CFG_OMIT_TX_INFO |
|
||||
- MT_WFDMA0_GLO_CFG_OMIT_RX_INFO_PFET2);
|
||||
+ MT_WFDMA0_GLO_CFG_OMIT_RX_INFO_PFET2 |
|
||||
+ MT_WFDMA0_GLO_CFG_EXT_EN);
|
||||
|
||||
if (dev->hif2)
|
||||
mt76_set(dev, MT_WFDMA0_GLO_CFG + hif1_ofs,
|
||||
@ -0,0 +1,60 @@
|
||||
From 025d5734caba6fa1fd96b57c19c61e42e601815b Mon Sep 17 00:00:00 2001
|
||||
From: Peter Chiu <chui-hao.chiu@mediatek.com>
|
||||
Date: Fri, 26 Jan 2024 17:09:12 +0800
|
||||
Subject: [PATCH] wifi: mt76: mt7996: check txs format before getting skb by
|
||||
pid
|
||||
|
||||
The PPDU TXS does not include the error bit so it cannot use to report
|
||||
status to mac80211. This patch fixes issue that STA wrongly detects if AP
|
||||
is still alive.
|
||||
|
||||
Fixes: 2569ea5326e2 ("wifi: mt76: mt7996: enable PPDU-TxS to host")
|
||||
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
|
||||
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
|
||||
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
---
|
||||
mt7996/mac.c | 23 +++++++++++++----------
|
||||
1 file changed, 13 insertions(+), 10 deletions(-)
|
||||
|
||||
--- a/mt7996/mac.c
|
||||
+++ b/mt7996/mac.c
|
||||
@@ -1188,25 +1188,28 @@ mt7996_mac_add_txs_skb(struct mt7996_dev
|
||||
struct ieee80211_tx_info *info;
|
||||
struct sk_buff_head list;
|
||||
struct rate_info rate = {};
|
||||
- struct sk_buff *skb;
|
||||
+ struct sk_buff *skb = NULL;
|
||||
bool cck = false;
|
||||
u32 txrate, txs, mode, stbc;
|
||||
|
||||
txs = le32_to_cpu(txs_data[0]);
|
||||
|
||||
mt76_tx_status_lock(mdev, &list);
|
||||
- skb = mt76_tx_status_skb_get(mdev, wcid, pid, &list);
|
||||
|
||||
- if (skb) {
|
||||
- info = IEEE80211_SKB_CB(skb);
|
||||
- if (!(txs & MT_TXS0_ACK_ERROR_MASK))
|
||||
- info->flags |= IEEE80211_TX_STAT_ACK;
|
||||
-
|
||||
- info->status.ampdu_len = 1;
|
||||
- info->status.ampdu_ack_len =
|
||||
- !!(info->flags & IEEE80211_TX_STAT_ACK);
|
||||
+ /* only report MPDU TXS */
|
||||
+ if (le32_get_bits(txs_data[0], MT_TXS0_TXS_FORMAT) == 0) {
|
||||
+ skb = mt76_tx_status_skb_get(mdev, wcid, pid, &list);
|
||||
+ if (skb) {
|
||||
+ info = IEEE80211_SKB_CB(skb);
|
||||
+ if (!(txs & MT_TXS0_ACK_ERROR_MASK))
|
||||
+ info->flags |= IEEE80211_TX_STAT_ACK;
|
||||
+
|
||||
+ info->status.ampdu_len = 1;
|
||||
+ info->status.ampdu_ack_len =
|
||||
+ !!(info->flags & IEEE80211_TX_STAT_ACK);
|
||||
|
||||
- info->status.rates[0].idx = -1;
|
||||
+ info->status.rates[0].idx = -1;
|
||||
+ }
|
||||
}
|
||||
|
||||
if (mtk_wed_device_active(&dev->mt76.mmio.wed) && wcid->sta) {
|
||||
@ -0,0 +1,38 @@
|
||||
From d75eac9f5531e484fbbabf2652922976e15a7a7a Mon Sep 17 00:00:00 2001
|
||||
From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
|
||||
Date: Tue, 16 Jan 2024 10:48:54 +0800
|
||||
Subject: [PATCH] wifi: mt76: mt7921: fix incorrect type conversion for CLC
|
||||
command
|
||||
|
||||
clc->len is defined as 32 bits in length, so it must also be
|
||||
operated on with 32 bits, not 16 bits.
|
||||
|
||||
Fixes: fa6ad88e023d ("wifi: mt76: mt7921: fix country count limitation for CLC")
|
||||
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
|
||||
Reported-by: kernel test robot <lkp@intel.com>
|
||||
Closes: https://lore.kernel.org/oe-kbuild-all/202312112104.Zkc3QUHr-lkp@intel.com/
|
||||
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
---
|
||||
mt7921/mcu.c | 4 ++--
|
||||
1 file changed, 2 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/mt7921/mcu.c
|
||||
+++ b/mt7921/mcu.c
|
||||
@@ -1272,7 +1272,7 @@ int __mt7921_mcu_set_clc(struct mt792x_d
|
||||
.mtcl_conf = mt792x_acpi_get_mtcl_conf(&dev->phy, alpha2),
|
||||
};
|
||||
int ret, valid_cnt = 0;
|
||||
- u16 buf_len = 0;
|
||||
+ u32 buf_len = 0;
|
||||
u8 *pos;
|
||||
|
||||
if (!clc)
|
||||
@@ -1283,7 +1283,7 @@ int __mt7921_mcu_set_clc(struct mt792x_d
|
||||
if (mt76_find_power_limits_node(&dev->mt76))
|
||||
req.cap |= CLC_CAP_DTS_EN;
|
||||
|
||||
- buf_len = le16_to_cpu(clc->len) - sizeof(*clc);
|
||||
+ buf_len = le32_to_cpu(clc->len) - sizeof(*clc);
|
||||
pos = clc->data;
|
||||
while (buf_len > 16) {
|
||||
struct mt7921_clc_rule *rule = (struct mt7921_clc_rule *)pos;
|
||||
@ -0,0 +1,28 @@
|
||||
From 841bf82e99581f648325bee570de98892cad894f Mon Sep 17 00:00:00 2001
|
||||
From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
|
||||
Date: Wed, 7 Feb 2024 11:31:23 +0800
|
||||
Subject: [PATCH] wifi: mt76: fix the issue of missing txpwr settings from
|
||||
ch153 to ch177
|
||||
|
||||
Because the number of channels to be configured is calculated using the %,
|
||||
and it results in 0 when there's an exact division, this leads to some
|
||||
channels not having their tx power configured.
|
||||
|
||||
Fixes: 7801da338856 ("wifi: mt76: mt7921: enable set txpower for UNII-4")
|
||||
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
|
||||
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
---
|
||||
mt76_connac_mcu.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/mt76_connac_mcu.c
|
||||
+++ b/mt76_connac_mcu.c
|
||||
@@ -2101,7 +2101,7 @@ mt76_connac_mcu_rate_txpower_band(struct
|
||||
int j, msg_len, num_ch;
|
||||
struct sk_buff *skb;
|
||||
|
||||
- num_ch = i == batch_size - 1 ? n_chan % batch_len : batch_len;
|
||||
+ num_ch = i == batch_size - 1 ? n_chan - i * batch_len : batch_len;
|
||||
msg_len = sizeof(tx_power_tlv) + num_ch * sizeof(sku_tlbv);
|
||||
skb = mt76_mcu_msg_alloc(dev, NULL, msg_len);
|
||||
if (!skb) {
|
||||
@ -0,0 +1,56 @@
|
||||
From b108dda7e201994f10c885362b07ff3b6e1e843d Mon Sep 17 00:00:00 2001
|
||||
From: Chad Monroe <chad@monroe.io>
|
||||
Date: Tue, 5 Mar 2024 17:55:35 +0000
|
||||
Subject: [PATCH] wifi: mt76: mt7996: fix size of txpower MCU command
|
||||
|
||||
Fixes issues with scanning and low power output at some rates.
|
||||
|
||||
Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support")
|
||||
Signed-off-by: Chad Monroe <chad@monroe.io>
|
||||
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
|
||||
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
---
|
||||
mt7996/mcu.c | 7 +++++--
|
||||
mt7996/mt7996.h | 1 +
|
||||
2 files changed, 6 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/mt7996/mcu.c
|
||||
+++ b/mt7996/mcu.c
|
||||
@@ -4456,7 +4456,7 @@ int mt7996_mcu_set_txpower_sku(struct mt
|
||||
u8 band_idx;
|
||||
} __packed req = {
|
||||
.tag = cpu_to_le16(UNI_TXPOWER_POWER_LIMIT_TABLE_CTRL),
|
||||
- .len = cpu_to_le16(sizeof(req) + MT7996_SKU_RATE_NUM - 4),
|
||||
+ .len = cpu_to_le16(sizeof(req) + MT7996_SKU_PATH_NUM - 4),
|
||||
.power_ctrl_id = UNI_TXPOWER_POWER_LIMIT_TABLE_CTRL,
|
||||
.power_limit_type = TX_POWER_LIMIT_TABLE_RATE,
|
||||
.band_idx = phy->mt76->band_idx,
|
||||
@@ -4471,7 +4471,7 @@ int mt7996_mcu_set_txpower_sku(struct mt
|
||||
mphy->txpower_cur = tx_power;
|
||||
|
||||
skb = mt76_mcu_msg_alloc(&dev->mt76, NULL,
|
||||
- sizeof(req) + MT7996_SKU_RATE_NUM);
|
||||
+ sizeof(req) + MT7996_SKU_PATH_NUM);
|
||||
if (!skb)
|
||||
return -ENOMEM;
|
||||
|
||||
@@ -4495,6 +4495,9 @@ int mt7996_mcu_set_txpower_sku(struct mt
|
||||
/* eht */
|
||||
skb_put_data(skb, &la.eht[0], sizeof(la.eht));
|
||||
|
||||
+ /* padding */
|
||||
+ skb_put_zero(skb, MT7996_SKU_PATH_NUM - MT7996_SKU_RATE_NUM);
|
||||
+
|
||||
return mt76_mcu_skb_send_msg(&dev->mt76, skb,
|
||||
MCU_WM_UNI_CMD(TXPOWER), true);
|
||||
}
|
||||
--- a/mt7996/mt7996.h
|
||||
+++ b/mt7996/mt7996.h
|
||||
@@ -50,6 +50,7 @@
|
||||
#define MT7996_CFEND_RATE_11B 0x03 /* 11B LP, 11M */
|
||||
|
||||
#define MT7996_SKU_RATE_NUM 417
|
||||
+#define MT7996_SKU_PATH_NUM 494
|
||||
|
||||
#define MT7996_MAX_TWT_AGRT 16
|
||||
#define MT7996_MAX_STA_TWT_AGRT 8
|
||||
@ -0,0 +1,27 @@
|
||||
From b96ab5e62010887a8abee43dbcccf6f4b3fcb269 Mon Sep 17 00:00:00 2001
|
||||
From: Lorenzo Bianconi <lorenzo@kernel.org>
|
||||
Date: Tue, 19 Mar 2024 13:05:36 +0100
|
||||
Subject: [PATCH] wifi: mt76: mt7996: fix uninitialized variable in
|
||||
mt7996_irq_tasklet()
|
||||
|
||||
Set intr1 to 0 in mt7996_irq_tasklet() in order to avoid possible
|
||||
uninitialized variable usage if wed is not active for hif2.
|
||||
|
||||
Fixes: 83eafc9251d6 ("wifi: mt76: mt7996: add wed tx support")
|
||||
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
|
||||
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
---
|
||||
mt7996/mmio.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/mt7996/mmio.c
|
||||
+++ b/mt7996/mmio.c
|
||||
@@ -499,7 +499,7 @@ static void mt7996_irq_tasklet(struct ta
|
||||
struct mt7996_dev *dev = from_tasklet(dev, t, mt76.irq_tasklet);
|
||||
struct mtk_wed_device *wed = &dev->mt76.mmio.wed;
|
||||
struct mtk_wed_device *wed_hif2 = &dev->mt76.mmio.wed_hif2;
|
||||
- u32 i, intr, mask, intr1;
|
||||
+ u32 i, intr, mask, intr1 = 0;
|
||||
|
||||
if (dev->hif2 && mtk_wed_device_active(wed_hif2)) {
|
||||
mtk_wed_device_irq_set_mask(wed_hif2, 0);
|
||||
@ -0,0 +1,39 @@
|
||||
From 424e9df466cea3bb39a1e92bf95f3efe65472c27 Mon Sep 17 00:00:00 2001
|
||||
From: Howard Hsu <howard-yh.hsu@mediatek.com>
|
||||
Date: Wed, 20 Mar 2024 19:09:14 +0800
|
||||
Subject: [PATCH] wifi: mt76: mt7996: fix potential memory leakage when reading
|
||||
chip temperature
|
||||
|
||||
Without this commit, reading chip temperature will cause memory leakage.
|
||||
|
||||
Fixes: 6879b2e94172 ("wifi: mt76: mt7996: add thermal sensor device support")
|
||||
Reported-by: Ryder Lee <ryder.lee@mediatek.com>
|
||||
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
|
||||
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
|
||||
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
---
|
||||
mt7996/mcu.c | 5 ++++-
|
||||
1 file changed, 4 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/mt7996/mcu.c
|
||||
+++ b/mt7996/mcu.c
|
||||
@@ -3721,6 +3721,7 @@ int mt7996_mcu_get_temperature(struct mt
|
||||
} __packed * res;
|
||||
struct sk_buff *skb;
|
||||
int ret;
|
||||
+ u32 temp;
|
||||
|
||||
ret = mt76_mcu_send_and_get_msg(&phy->dev->mt76, MCU_WM_UNI_CMD(THERMAL),
|
||||
&req, sizeof(req), true, &skb);
|
||||
@@ -3728,8 +3729,10 @@ int mt7996_mcu_get_temperature(struct mt
|
||||
return ret;
|
||||
|
||||
res = (void *)skb->data;
|
||||
+ temp = le32_to_cpu(res->temperature);
|
||||
+ dev_kfree_skb(skb);
|
||||
|
||||
- return le32_to_cpu(res->temperature);
|
||||
+ return temp;
|
||||
}
|
||||
|
||||
int mt7996_mcu_set_thermal_throttling(struct mt7996_phy *phy, u8 state)
|
||||
Loading…
Reference in New Issue
Block a user