From 0127de9547285a0cf44aea76e0a726b85d8c5235 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 24 Jun 2020 19:47:06 +0200 Subject: [PATCH] ipq806x: set IMAGES in Device/Default definition The Device/Default definition sets a default IMAGE/sysupgrade.bin, but does not enable it by setting IMAGES. This is not consistent, and has led to IMAGES being defined at various other places in the file. Thus, this patch consolidates the default value for IMAGES by putting it in Device/Default. Since it's still overwritten where necessary, this patch is cosmetic. Signed-off-by: Adrian Schmutzler --- target/linux/ipq806x/image/Makefile | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index 6ea66d064db..578303e9e06 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -21,6 +21,7 @@ define Device/Default KERNEL_LOADADDR = 0x42208000 DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1))) SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) + IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata IMAGE/sysupgrade.bin/squashfs := endef @@ -57,7 +58,7 @@ define Device/DniImage NETGEAR_BOARD_ID := NETGEAR_HW_ID := UBINIZE_OPTS := -E 5 - IMAGES := factory.img sysupgrade.bin + IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata endef @@ -67,7 +68,7 @@ define Device/TpSafeImage KERNEL = kernel-bin | append-dtb | uImage none KERNEL_NAME := zImage TPLINK_BOARD_ID := - IMAGES := factory.bin sysupgrade.bin + IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | tplink-safeloader factory IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata endef @@ -76,7 +77,7 @@ define Device/ZyXELImage KERNEL_SUFFIX := -uImage KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE) KERNEL_NAME := zImage - IMAGES := factory.bin sysupgrade.bin + IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata endef @@ -90,7 +91,6 @@ define Device/buffalo_wxr-2533dhp PAGESIZE := 2048 IMAGE_SIZE := 65536k KERNEL_IN_UBI := 1 - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \ sysupgrade-tar rootfs=$$$$@ | append-metadata DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct @@ -121,7 +121,7 @@ define Device/linksys_ea8500 BOARD_NAME := ea8500 SUPPORTED_DEVICES += ea8500 UBINIZE_OPTS := -E 5 - IMAGES := factory.bin sysupgrade.bin + IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef @@ -134,7 +134,6 @@ define Device/nec_wg2600hp SOC := qcom-ipq8064 BLOCKSIZE := 64k BOARD_NAME := wg2600hp - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef @@ -295,7 +294,6 @@ define Device/tplink_vr2600v BOARD_NAME := vr2600v SUPPORTED_DEVICES += vr2600v DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata endef TARGET_DEVICES += tplink_vr2600v