openwrt/target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch

139 lines
4.8 KiB
Diff
Raw Normal View History

mvebu: new subtarget cortex A53 This commit introduces new subtarget for Marvell EBU Armada Cortex A53 processor based devices. The first device is Globalscale ESPRESSObin. Some hardware specs: SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz RAM: 512MB, 1GB or 2GB DDR3 Storage: SATA interface µSD card slot with footprint for an optional 4GB EMMC 4MB SPI NOR flash for bootloader Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports Connectors: USB 3.0 USB 2.0 µUSB port connected to PL2303SA (USB to serial bridge controller) for UART access Expansion: 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, SPI, MMC, etc MiniPCIe slot Misc: Reset button, JTAG interface Currently booting only from µSD card is supported. The boards depending on date of dispatch can come with various U-Boot versions. For the newest version 2017.03-armada-17.10 no manual intervention should be needed to boot OpenWrt image. For the older ones it's necessary to modify default U-Boot environment: 1. Interrupt boot process to run U-Boot command line, 2. Run following commands: (for version 2017.03-armada-17.06 and 2017.03-armada-17.08) setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000" saveenv (for version 2015.01-armada-17.02 and 2015.01-armada-17.04) setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait" setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}" saveenv 3. Poweroff, insert SD card with OpenWrt image, boot and enjoy. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
From patchwork Thu Sep 28 12:58:34 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v2,
3/7] PCI: aardvark: set host and device to the same MAX payload size
X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
X-Patchwork-Id: 819587
Message-Id: <20170928125838.11887-4-thomas.petazzoni@free-electrons.com>
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement
<gregory.clement@free-electrons.com>,
Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>,
Yehuda Yitschak <yehuday@marvell.com>,
linux-arm-kernel@lists.infradead.org, Antoine Tenart
<antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?=
<miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Thu, 28 Sep 2017 14:58:34 +0200
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
List-Id: <linux-pci.vger.kernel.org>
From: Victor Gu <xigu@marvell.com>
Since the Aardvark does not implement a PCIe root bus, the Linux PCIe
subsystem will not align the MAX payload size between the host and the
device. This patch ensures that the host and device have the same MAX
payload size, fixing a number of problems with various PCIe devices.
This is part of fixing bug
https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was
reported as the user to be important to get a Intel 7260 mini-PCIe
WiFi card working.
Fixes: Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Victor Gu <xigu@marvell.com>
Reviewed-by: Evan Wang <xswang@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
drivers/pci/host/pci-aardvark.c | 60 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 59 insertions(+), 1 deletion(-)
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -30,9 +30,11 @@
mvebu: new subtarget cortex A53 This commit introduces new subtarget for Marvell EBU Armada Cortex A53 processor based devices. The first device is Globalscale ESPRESSObin. Some hardware specs: SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz RAM: 512MB, 1GB or 2GB DDR3 Storage: SATA interface µSD card slot with footprint for an optional 4GB EMMC 4MB SPI NOR flash for bootloader Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports Connectors: USB 3.0 USB 2.0 µUSB port connected to PL2303SA (USB to serial bridge controller) for UART access Expansion: 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, SPI, MMC, etc MiniPCIe slot Misc: Reset button, JTAG interface Currently booting only from µSD card is supported. The boards depending on date of dispatch can come with various U-Boot versions. For the newest version 2017.03-armada-17.10 no manual intervention should be needed to boot OpenWrt image. For the older ones it's necessary to modify default U-Boot environment: 1. Interrupt boot process to run U-Boot command line, 2. Run following commands: (for version 2017.03-armada-17.06 and 2017.03-armada-17.08) setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000" saveenv (for version 2015.01-armada-17.02 and 2015.01-armada-17.04) setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait" setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}" saveenv 3. Poweroff, insert SD card with OpenWrt image, boot and enjoy. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
#define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8
#define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4)
#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5
+#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ 0x2
#define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11)
#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12
#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2
mvebu: new subtarget cortex A53 This commit introduces new subtarget for Marvell EBU Armada Cortex A53 processor based devices. The first device is Globalscale ESPRESSObin. Some hardware specs: SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz RAM: 512MB, 1GB or 2GB DDR3 Storage: SATA interface µSD card slot with footprint for an optional 4GB EMMC 4MB SPI NOR flash for bootloader Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports Connectors: USB 3.0 USB 2.0 µUSB port connected to PL2303SA (USB to serial bridge controller) for UART access Expansion: 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, SPI, MMC, etc MiniPCIe slot Misc: Reset button, JTAG interface Currently booting only from µSD card is supported. The boards depending on date of dispatch can come with various U-Boot versions. For the newest version 2017.03-armada-17.10 no manual intervention should be needed to boot OpenWrt image. For the older ones it's necessary to modify default U-Boot environment: 1. Interrupt boot process to run U-Boot command line, 2. Run following commands: (for version 2017.03-armada-17.06 and 2017.03-armada-17.08) setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000" saveenv (for version 2015.01-armada-17.02 and 2015.01-armada-17.04) setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait" setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}" saveenv 3. Poweroff, insert SD card with OpenWrt image, boot and enjoy. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
+#define PCIE_CORE_MPS_UNIT_BYTE 128
#define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
#define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
#define PCIE_CORE_LINK_TRAINING BIT(5)
@@ -297,7 +299,8 @@ static void advk_pcie_setup_hw(struct ad
/* Set PCIe Device Control and Status 1 PF0 register */
reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
- (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
+ (PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ <<
+ PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
(PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
@@ -886,6 +889,58 @@ out_release_res:
mvebu: new subtarget cortex A53 This commit introduces new subtarget for Marvell EBU Armada Cortex A53 processor based devices. The first device is Globalscale ESPRESSObin. Some hardware specs: SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz RAM: 512MB, 1GB or 2GB DDR3 Storage: SATA interface µSD card slot with footprint for an optional 4GB EMMC 4MB SPI NOR flash for bootloader Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports Connectors: USB 3.0 USB 2.0 µUSB port connected to PL2303SA (USB to serial bridge controller) for UART access Expansion: 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, SPI, MMC, etc MiniPCIe slot Misc: Reset button, JTAG interface Currently booting only from µSD card is supported. The boards depending on date of dispatch can come with various U-Boot versions. For the newest version 2017.03-armada-17.10 no manual intervention should be needed to boot OpenWrt image. For the older ones it's necessary to modify default U-Boot environment: 1. Interrupt boot process to run U-Boot command line, 2. Run following commands: (for version 2017.03-armada-17.06 and 2017.03-armada-17.08) setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000" saveenv (for version 2015.01-armada-17.02 and 2015.01-armada-17.04) setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait" setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}" saveenv 3. Poweroff, insert SD card with OpenWrt image, boot and enjoy. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
return err;
}
+static int advk_pcie_find_smpss(struct pci_dev *dev, void *data)
+{
+ u8 *smpss = data;
+
+ if (!dev)
+ return 0;
+
+ if (!pci_is_pcie(dev))
+ return 0;
+
+ if (*smpss > dev->pcie_mpss)
+ *smpss = dev->pcie_mpss;
+
+ return 0;
+}
+
+static int advk_pcie_bus_configure_mps(struct pci_dev *dev, void *data)
+{
+ int mps;
+
+ if (!dev)
+ return 0;
+
+ if (!pci_is_pcie(dev))
+ return 0;
+
+ mps = PCIE_CORE_MPS_UNIT_BYTE << *(u8 *)data;
+ pcie_set_mps(dev, mps);
+
+ return 0;
+}
+
+static void advk_pcie_configure_mps(struct pci_bus *bus, struct advk_pcie *pcie)
+{
+ u8 smpss = PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ;
+ u32 reg;
+
+ /* Find the minimal supported MAX payload size */
+ advk_pcie_find_smpss(bus->self, &smpss);
+ pci_walk_bus(bus, advk_pcie_find_smpss, &smpss);
+
+ /* Configure RC MAX payload size */
+ reg = advk_readl(pcie, PCIE_CORE_DEV_CTRL_STATS_REG);
+ reg &= ~PCI_EXP_DEVCTL_PAYLOAD;
+ reg |= smpss << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT;
+ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
+
+ /* Configure device MAX payload size */
+ advk_pcie_bus_configure_mps(bus->self, &smpss);
+ pci_walk_bus(bus, advk_pcie_bus_configure_mps, &smpss);
+}
+
static int advk_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -959,6 +1014,9 @@ static int advk_pcie_probe(struct platfo
mvebu: new subtarget cortex A53 This commit introduces new subtarget for Marvell EBU Armada Cortex A53 processor based devices. The first device is Globalscale ESPRESSObin. Some hardware specs: SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz RAM: 512MB, 1GB or 2GB DDR3 Storage: SATA interface µSD card slot with footprint for an optional 4GB EMMC 4MB SPI NOR flash for bootloader Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports Connectors: USB 3.0 USB 2.0 µUSB port connected to PL2303SA (USB to serial bridge controller) for UART access Expansion: 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, SPI, MMC, etc MiniPCIe slot Misc: Reset button, JTAG interface Currently booting only from µSD card is supported. The boards depending on date of dispatch can come with various U-Boot versions. For the newest version 2017.03-armada-17.10 no manual intervention should be needed to boot OpenWrt image. For the older ones it's necessary to modify default U-Boot environment: 1. Interrupt boot process to run U-Boot command line, 2. Run following commands: (for version 2017.03-armada-17.06 and 2017.03-armada-17.08) setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000" saveenv (for version 2015.01-armada-17.02 and 2015.01-armada-17.04) setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait" setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}" saveenv 3. Poweroff, insert SD card with OpenWrt image, boot and enjoy. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
+ /* Configure the MAX pay load size */
+ advk_pcie_configure_mps(bus, pcie);
+
pci_bus_add_devices(bus);
return 0;
}