ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 21:58:04 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
fd9dc10530
openwrt/target/linux/ramips/dts/mt7621_netgear_sercomm_chj.dtsi

370 lines
6.1 KiB
Plaintext
Raw Normal View History

target: update SPDX license names SPDX moved from GPL-2.0 to GPL-2.0-only and from GPL-2.0+ to GPL-2.0-or-later. Reflect that in the SPDX license headers. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-22 18:49:55 +00:00
// SPDX-License-Identifier: GPL-2.0-only
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
/ {
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
compatible = "mediatek,mt7621-soc";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
ramips: mt7621: update dts/defconfig for DSA update dts and network/LED configuration for DSA driver. sysupgrade from images prior to this commit with config preserved will cause broken ethernet setup. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> Acked-by: Jo-Philipp Wich <jo@mein.io> [split commit] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-03-18 15:38:58 +00:00
label-mac-device = &gmac0;
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
};
leds {
compatible = "gpio-leds";
led_power: power {
ramips: remove model name from LED labels Like in the previous patch for ath79 target, this will remove the "devicename" from LED labels in ramips as well. The devicename is removed in DTS files and 01_leds, consolidation of definitions into DTSI files is done where (easily) possible, and migration scripts are updated. For the latter, all existing definitions were actually just devicename migrations anyway. Therefore, those are removed and a common migration file is created in target base-files. This is actually another example of how the devicename removal makes things easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-27 17:40:51 +00:00
label = "green:power";
ramips: mt7621: convert GPIO dts refs The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-03-03 21:22:24 +00:00
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
};
ramips: remove model name from LED labels Like in the previous patch for ath79 target, this will remove the "devicename" from LED labels in ramips as well. The devicename is removed in DTS files and 01_leds, consolidation of definitions into DTSI files is done where (easily) possible, and migration scripts are updated. For the latter, all existing definitions were actually just devicename migrations anyway. Therefore, those are removed and a common migration file is created in target base-files. This is actually another example of how the devicename removal makes things easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-27 17:40:51 +00:00
usb {
label = "green:usb";
ramips: mt7621: convert GPIO dts refs The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-03-03 21:22:24 +00:00
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
ramips: remove model name from LED labels Like in the previous patch for ath79 target, this will remove the "devicename" from LED labels in ramips as well. The devicename is removed in DTS files and 01_leds, consolidation of definitions into DTSI files is done where (easily) possible, and migration scripts are updated. For the latter, all existing definitions were actually just devicename migrations anyway. Therefore, those are removed and a common migration file is created in target base-files. This is actually another example of how the devicename removal makes things easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-27 17:40:51 +00:00
internet {
label = "green:wan";
ramips: mt7621: convert GPIO dts refs The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-03-03 21:22:24 +00:00
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
};
ramips: remove model name from LED labels Like in the previous patch for ath79 target, this will remove the "devicename" from LED labels in ramips as well. The devicename is removed in DTS files and 01_leds, consolidation of definitions into DTSI files is done where (easily) possible, and migration scripts are updated. For the latter, all existing definitions were actually just devicename migrations anyway. Therefore, those are removed and a common migration file is created in target base-files. This is actually another example of how the devicename removal makes things easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-27 17:40:51 +00:00
wifi {
label = "green:wifi";
ramips: mt7621: convert GPIO dts refs The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-03-03 21:22:24 +00:00
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
linux,default-trigger = "phy0tpt";
};
};
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
keys {
compatible = "gpio-keys";
wps {
label = "wps";
ramips: mt7621: convert GPIO dts refs The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-03-03 21:22:24 +00:00
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
ramips: mt7621: convert GPIO dts refs The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-03-03 21:22:24 +00:00
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
linux,code = <KEY_RESTART>;
};
};
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
reg_usb_vbus: regulator {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
ramips: mt7621: convert GPIO dts refs The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-03-03 21:22:24 +00:00
gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
enable-active-high;
};
};
&xhci {
vbus-supply = <&reg_usb_vbus>;
};
&pcie {
status = "okay";
};
&pcie0 {
Revert "ramips: fix NETGEAR R6260 EEPROM offset" This reverts commit 4716c843d62a5a4c37e7886f54bcf446aa26e786. Netgear seems to use different partition layouts on the R6260, which would require us to dynamically detect the position of (at least) the factory partition. Revert this fix to avoid breaking existing installations until a better solution has been worked out. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-30 11:37:28 +00:00
wifi@0,0 {
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
compatible = "mediatek,mt76";
reg = <0x0 0 0 0 0>;
Revert "ramips: fix NETGEAR R6260 EEPROM offset" This reverts commit 4716c843d62a5a4c37e7886f54bcf446aa26e786. Netgear seems to use different partition layouts on the R6260, which would require us to dynamically detect the position of (at least) the factory partition. Revert this fix to avoid breaking existing installations until a better solution has been worked out. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-30 11:37:28 +00:00
mediatek,mtd-eeprom = <&factory 0x8000>;
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pcie1 {
Revert "ramips: fix NETGEAR R6260 EEPROM offset" This reverts commit 4716c843d62a5a4c37e7886f54bcf446aa26e786. Netgear seems to use different partition layouts on the R6260, which would require us to dynamically detect the position of (at least) the factory partition. Revert this fix to avoid breaking existing installations until a better solution has been worked out. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-30 11:37:28 +00:00
wifi@0,0 {
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
compatible = "mediatek,mt76";
reg = <0x0 0 0 0 0>;
Revert "ramips: fix NETGEAR R6260 EEPROM offset" This reverts commit 4716c843d62a5a4c37e7886f54bcf446aa26e786. Netgear seems to use different partition layouts on the R6260, which would require us to dynamically detect the position of (at least) the factory partition. Revert this fix to avoid breaking existing installations until a better solution has been worked out. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-30 11:37:28 +00:00
mediatek,mtd-eeprom = <&factory 0x0>;
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
ieee80211-freq-limit = <2400000 2500000>;
};
};
ramips: mt7621: update dts/defconfig for DSA update dts and network/LED configuration for DSA driver. sysupgrade from images prior to this commit with config preserved will cause broken ethernet setup. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> Acked-by: Jo-Philipp Wich <jo@mein.io> [split commit] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-03-18 15:38:58 +00:00
&gmac0 {
ramips: convert mtd-mac-address to nvmem implementation Define nvmem-cells and convert mtd-mac-address to nvmem implementation. The conversion is done with an automated script. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-04-02 21:50:02 +00:00
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
};
ramips: mt7621-dts: mux phy0/4 to gmac1 Mux the MT7530 switch's phy0/4 to the SoC's gmac1 on devices where RGMII2 pins are available. This achieves 2 Gbps total bandwidth to the CPU using the second RGMII. The ports called "wan" are muxed where possible. On a minority of devices, this is not possible. Those cases: mt7621_ampedwireless_ally-r1900k.dts: lan3 mt7621_ubnt_edgerouter-x.dts: eth0 mt7621_gnubee_gb-pc1.dts: ethblue mt7621_linksys_re6500.dts: lan1 mt7621_netgear_wac104.dts: lan4 mt7621_tplink_eap235-wall-v1.dts: lan0 mt7621_tplink_eap615-wall-v1.dts: lan0 mt7621_ubnt_usw-flex.dts: lan1 The "wan" port is just what the vendor designated on the board/plastic chasis of the device. On a technical level, there is no difference between a lan and wan port on MT7621AT, MT7621DAT and MT7621ST SoCs. Prefer connecting to WAN via the port described above for these devices to benefit the feature brought with this patch. mt7621_d-team_newifi-d2.dts cannot benefit this feature, although it looks like it should, because the rgmii2 pins are wired to unused components. Tested on a range of devices documented on the GitHub PR. Link: https://github.com/openwrt/openwrt/pull/10238 Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
2022-07-05 22:20:32 +00:00
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
mac-address-increment = <2>;
};
&mdio {
ethphy4: ethernet-phy@4 {
reg = <4>;
};
};
ramips: mt7621: update dts/defconfig for DSA update dts and network/LED configuration for DSA driver. sysupgrade from images prior to this commit with config preserved will cause broken ethernet setup. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> Acked-by: Jo-Philipp Wich <jo@mein.io> [split commit] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-03-18 15:38:58 +00:00
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan4";
};
port@1 {
status = "okay";
label = "lan3";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan1";
};
};
};
ramips: simplify state_default/pinctrl0 in device DTS files The node pinctrl0 is already set up in the SOC DTSI files, but defined again as member of pinctrl in most of the device DTS(I) files. This patch removes this redundancy for the entire ramips target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-22 20:26:01 +00:00
&state_default {
gpio {
ramips: mt7621: update pinctrl nodes Upstream GPIO driver uses "groups" "function" properties Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-03-13 13:27:03 +00:00
groups = "uart3", "uart2", "jtag", "wdt";
function = "gpio";
ramips: reorganize NETGEAR sercomm boards This re-organizes the device-tree files for the Sercomm-manufactured NETGEAR routers. They are now split into two different base-boards, from which the respective model is extended. This partially reverts commit c7842ceaaa27 ("ramips: reorganize DTSI files for Netgear R devices"), which introduced inheritance between two completely unrelated base-boards. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-11-17 14:51:48 +00:00
};
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
};
&nand {
status = "okay";
partitions {
ramips: use on-flash partition table for Sercomm BZV/CHJ These devices have a partition table stored in flash, which compensates for any pre-existing bad blocks by enlarging the respective partition. This means that the current static partition table is only correct for devices without any bad blocks. Typical results of this mismatch are degraded wireless performance and wrong MAC addresses, when the factory partition is shifted due to a bad block somewhere before it. If there is a bad block already before the ubi partition, then OpenWrt may not run at all because the kernel can't find the rootfs. Use the on-flash partition table to fix these issues. Replace the two reserved partitions by the full partition list, as the driver does not allow merging them. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-01-27 23:01:18 +00:00
compatible = "sercomm,sc-partitions", "fixed-partitions";
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
ramips: use on-flash partition table for Sercomm BZV/CHJ These devices have a partition table stored in flash, which compensates for any pre-existing bad blocks by enlarging the respective partition. This means that the current static partition table is only correct for devices without any bad blocks. Typical results of this mismatch are degraded wireless performance and wrong MAC addresses, when the factory partition is shifted due to a bad block somewhere before it. If there is a bad block already before the ubi partition, then OpenWrt may not run at all because the kernel can't find the rootfs. Use the on-flash partition table to fix these issues. Replace the two reserved partitions by the full partition list, as the driver does not allow merging them. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-01-27 23:01:18 +00:00
sercomm,scpart-id = <0>;
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
read-only;
};
partition@100000 {
label = "SC PART_MAP";
reg = <0x100000 0x100000>;
ramips: use on-flash partition table for Sercomm BZV/CHJ These devices have a partition table stored in flash, which compensates for any pre-existing bad blocks by enlarging the respective partition. This means that the current static partition table is only correct for devices without any bad blocks. Typical results of this mismatch are degraded wireless performance and wrong MAC addresses, when the factory partition is shifted due to a bad block somewhere before it. If there is a bad block already before the ubi partition, then OpenWrt may not run at all because the kernel can't find the rootfs. Use the on-flash partition table to fix these issues. Replace the two reserved partitions by the full partition list, as the driver does not allow merging them. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-01-27 23:01:18 +00:00
sercomm,scpart-id = <1>;
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
read-only;
};
partition@200000 {
label = "kernel";
reg = <0x200000 0x400000>;
ramips: use on-flash partition table for Sercomm BZV/CHJ These devices have a partition table stored in flash, which compensates for any pre-existing bad blocks by enlarging the respective partition. This means that the current static partition table is only correct for devices without any bad blocks. Typical results of this mismatch are degraded wireless performance and wrong MAC addresses, when the factory partition is shifted due to a bad block somewhere before it. If there is a bad block already before the ubi partition, then OpenWrt may not run at all because the kernel can't find the rootfs. Use the on-flash partition table to fix these issues. Replace the two reserved partitions by the full partition list, as the driver does not allow merging them. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-01-27 23:01:18 +00:00
sercomm,scpart-id = <2>;
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
};
partition@600000 {
label = "ubi";
reg = <0x600000 0x2800000>;
ramips: use on-flash partition table for Sercomm BZV/CHJ These devices have a partition table stored in flash, which compensates for any pre-existing bad blocks by enlarging the respective partition. This means that the current static partition table is only correct for devices without any bad blocks. Typical results of this mismatch are degraded wireless performance and wrong MAC addresses, when the factory partition is shifted due to a bad block somewhere before it. If there is a bad block already before the ubi partition, then OpenWrt may not run at all because the kernel can't find the rootfs. Use the on-flash partition table to fix these issues. Replace the two reserved partitions by the full partition list, as the driver does not allow merging them. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-01-27 23:01:18 +00:00
sercomm,scpart-id = <3>;
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
};
partition@2e00000 {
ramips: use on-flash partition table for Sercomm BZV/CHJ These devices have a partition table stored in flash, which compensates for any pre-existing bad blocks by enlarging the respective partition. This means that the current static partition table is only correct for devices without any bad blocks. Typical results of this mismatch are degraded wireless performance and wrong MAC addresses, when the factory partition is shifted due to a bad block somewhere before it. If there is a bad block already before the ubi partition, then OpenWrt may not run at all because the kernel can't find the rootfs. Use the on-flash partition table to fix these issues. Replace the two reserved partitions by the full partition list, as the driver does not allow merging them. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-01-27 23:01:18 +00:00
label = "English UI";
reg = <0x2e00000 0x200000>;
sercomm,scpart-id = <4>;
read-only;
};
partition@3000000 {
label = "ML1";
reg = <0x3000000 0x200000>;
sercomm,scpart-id = <5>;
read-only;
};
partition@3200000 {
label = "ML2";
reg = <0x3200000 0x200000>;
sercomm,scpart-id = <6>;
read-only;
};
partition@3400000 {
label = "ML3";
reg = <0x3400000 0x200000>;
sercomm,scpart-id = <7>;
read-only;
};
partition@3600000 {
label = "ML4";
reg = <0x3600000 0x200000>;
sercomm,scpart-id = <8>;
read-only;
};
partition@3800000 {
label = "ML5";
reg = <0x3800000 0x200000>;
sercomm,scpart-id = <9>;
read-only;
};
partition@3a00000 {
label = "ML6";
reg = <0x3a00000 0x200000>;
sercomm,scpart-id = <10>;
read-only;
};
partition@3c00000 {
label = "ML7";
reg = <0x3c00000 0x200000>;
sercomm,scpart-id = <11>;
read-only;
};
partition@3e00000 {
label = "ML8";
reg = <0x3e00000 0x200000>;
sercomm,scpart-id = <12>;
read-only;
};
partition@4000000 {
label = "ML9";
reg = <0x4000000 0x200000>;
sercomm,scpart-id = <13>;
read-only;
};
partition@4200000 {
label = "ML10";
reg = <0x4200000 0x200000>;
sercomm,scpart-id = <14>;
read-only;
};
partition@4400000 {
label = "ML11";
reg = <0x4400000 0x200000>;
sercomm,scpart-id = <15>;
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
read-only;
};
factory: partition@4600000 {
label = "factory";
reg = <0x4600000 0x200000>;
ramips: use on-flash partition table for Sercomm BZV/CHJ These devices have a partition table stored in flash, which compensates for any pre-existing bad blocks by enlarging the respective partition. This means that the current static partition table is only correct for devices without any bad blocks. Typical results of this mismatch are degraded wireless performance and wrong MAC addresses, when the factory partition is shifted due to a bad block somewhere before it. If there is a bad block already before the ubi partition, then OpenWrt may not run at all because the kernel can't find the rootfs. Use the on-flash partition table to fix these issues. Replace the two reserved partitions by the full partition list, as the driver does not allow merging them. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-01-27 23:01:18 +00:00
sercomm,scpart-id = <16>;
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
read-only;
};
partition@4800000 {
ramips: use on-flash partition table for Sercomm BZV/CHJ These devices have a partition table stored in flash, which compensates for any pre-existing bad blocks by enlarging the respective partition. This means that the current static partition table is only correct for devices without any bad blocks. Typical results of this mismatch are degraded wireless performance and wrong MAC addresses, when the factory partition is shifted due to a bad block somewhere before it. If there is a bad block already before the ubi partition, then OpenWrt may not run at all because the kernel can't find the rootfs. Use the on-flash partition table to fix these issues. Replace the two reserved partitions by the full partition list, as the driver does not allow merging them. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-01-27 23:01:18 +00:00
label = "SC Private Data";
reg = <0x4800000 0x200000>;
sercomm,scpart-id = <17>;
read-only;
};
partition@4a00000 {
label = "POT";
reg = <0x4a00000 0x200000>;
sercomm,scpart-id = <18>;
read-only;
};
partition@4c00000 {
label = "Traffic Meter";
reg = <0x4c00000 0x200000>;
sercomm,scpart-id = <19>;
read-only;
};
partition@4e00000 {
label = "SC PID";
reg = <0x4e00000 0x200000>;
sercomm,scpart-id = <20>;
read-only;
};
partition@5000000 {
label = "SC Nvram";
reg = <0x5000000 0x200000>;
sercomm,scpart-id = <21>;
read-only;
};
partition@5200000 {
label = "Ralink Nvram";
reg = <0x5200000 0x200000>;
sercomm,scpart-id = <22>;
read-only;
};
partition@5400000 {
label = "reserved0";
reg = <0x5400000 0x200000>;
sercomm,scpart-id = <23>;
read-only;
};
partition@5600000 {
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
label = "reserved1";
ramips: use on-flash partition table for Sercomm BZV/CHJ These devices have a partition table stored in flash, which compensates for any pre-existing bad blocks by enlarging the respective partition. This means that the current static partition table is only correct for devices without any bad blocks. Typical results of this mismatch are degraded wireless performance and wrong MAC addresses, when the factory partition is shifted due to a bad block somewhere before it. If there is a bad block already before the ubi partition, then OpenWrt may not run at all because the kernel can't find the rootfs. Use the on-flash partition table to fix these issues. Replace the two reserved partitions by the full partition list, as the driver does not allow merging them. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-01-27 23:01:18 +00:00
reg = <0x5600000 0x200000>;
sercomm,scpart-id = <24>;
read-only;
};
partition@5800000 {
label = "reserved2";
reg = <0x5800000 0x200000>;
sercomm,scpart-id = <25>;
read-only;
};
partition@5a00000 {
label = "reserved3";
reg = <0x5a00000 0x200000>;
sercomm,scpart-id = <26>;
read-only;
};
partition@5c00000 {
label = "reserved4";
reg = <0x5c00000 0x200000>;
sercomm,scpart-id = <27>;
read-only;
};
partition@5e00000 {
label = "reserved5";
reg = <0x5e00000 0x2180000>;
sercomm,scpart-id = <28>;
ramips: reorganize DTSI files for Netgear R devices This reorganizes DTSI files for the Netgear R devices in mt7621 (and the WNDR3700 v5). It creates a common DTSI for all R (sercomm) devices and distributes the remaining code in r6220.dtsi to R6220 and WNDR3700 v5. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-24 11:36:47 +00:00
read-only;
};
};
};
ramips: convert mtd-mac-address to nvmem implementation Define nvmem-cells and convert mtd-mac-address to nvmem implementation. The conversion is done with an automated script. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-04-02 21:50:02 +00:00
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};
Reference in New Issue Copy Permalink