openwrt/target/linux/generic/backport-5.15/783-v6.1-net-sfp-re-implement-soft-state-polling-setup.patch

99 lines
3.4 KiB
Diff
Raw Normal View History

From 8475c4b70b040f9d8cbc308100f2c4d865f810b3 Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Tue, 13 Sep 2022 20:06:27 +0100
Subject: [PATCH 1/1] net: sfp: re-implement soft state polling setup
Re-implement the decision making for soft state polling. Instead of
generating the soft state mask in sfp_soft_start_poll() by looking at
which GPIOs are available, record their availability in
sfp_sm_mod_probe() in sfp->state_hw_mask.
This will then allow us to clear bits in sfp->state_hw_mask in module
specific quirks when the hardware signals should not be used, thereby
allowing us to switch to using the software state polling.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
drivers/net/phy/sfp.c | 38 ++++++++++++++++++++++++++------------
1 file changed, 26 insertions(+), 12 deletions(-)
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -240,6 +240,7 @@ struct sfp {
bool need_poll;
struct mutex st_mutex; /* Protects state */
+ unsigned int state_hw_mask;
unsigned int state_soft_mask;
unsigned int state;
struct delayed_work poll;
@@ -505,17 +506,18 @@ static void sfp_soft_set_state(struct sf
static void sfp_soft_start_poll(struct sfp *sfp)
{
const struct sfp_eeprom_id *id = &sfp->id;
+ unsigned int mask = 0;
sfp->state_soft_mask = 0;
- if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_DISABLE &&
- !sfp->gpio[GPIO_TX_DISABLE])
- sfp->state_soft_mask |= SFP_F_TX_DISABLE;
- if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_FAULT &&
- !sfp->gpio[GPIO_TX_FAULT])
- sfp->state_soft_mask |= SFP_F_TX_FAULT;
- if (id->ext.enhopts & SFP_ENHOPTS_SOFT_RX_LOS &&
- !sfp->gpio[GPIO_LOS])
- sfp->state_soft_mask |= SFP_F_LOS;
+ if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_DISABLE)
+ mask |= SFP_F_TX_DISABLE;
+ if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_FAULT)
+ mask |= SFP_F_TX_FAULT;
+ if (id->ext.enhopts & SFP_ENHOPTS_SOFT_RX_LOS)
+ mask |= SFP_F_LOS;
+
+ // Poll the soft state for hardware pins we want to ignore
+ sfp->state_soft_mask = ~sfp->state_hw_mask & mask;
if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) &&
!sfp->need_poll)
@@ -529,10 +531,11 @@ static void sfp_soft_stop_poll(struct sf
static unsigned int sfp_get_state(struct sfp *sfp)
{
- unsigned int state = sfp->get_state(sfp);
+ unsigned int soft = sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT);
+ unsigned int state;
- if (state & SFP_F_PRESENT &&
- sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT))
+ state = sfp->get_state(sfp) & sfp->state_hw_mask;
+ if (state & SFP_F_PRESENT && soft)
state |= sfp_soft_get_state(sfp);
return state;
@@ -1942,6 +1945,15 @@ static int sfp_sm_mod_probe(struct sfp *
if (ret < 0)
return ret;
+ /* Initialise state bits to use from hardware */
+ sfp->state_hw_mask = SFP_F_PRESENT;
+ if (sfp->gpio[GPIO_TX_DISABLE])
+ sfp->state_hw_mask |= SFP_F_TX_DISABLE;
+ if (sfp->gpio[GPIO_TX_FAULT])
+ sfp->state_hw_mask |= SFP_F_TX_FAULT;
+ if (sfp->gpio[GPIO_LOS])
+ sfp->state_hw_mask |= SFP_F_LOS;
+
if (!memcmp(id.base.vendor_name, "ALCATELLUCENT ", 16) &&
!memcmp(id.base.vendor_pn, "3FE46541AA ", 16))
sfp->module_t_start_up = T_START_UP_BAD_GPON;
@@ -2568,6 +2580,8 @@ static int sfp_probe(struct platform_dev
return PTR_ERR(sfp->gpio[i]);
}
+ sfp->state_hw_mask = SFP_F_PRESENT;
+
sfp->get_state = sfp_gpio_get_state;
sfp->set_state = sfp_gpio_set_state;