openwrt/target/linux/brcm2708/patches-4.14/950-0074-ARM-adau1977-adc-Add-basic-machine-driver-for-adau19.patch

178 lines
5.4 KiB
Diff
Raw Normal View History

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
From d40ccbe0dbe26b7468ea1383e41d43179ff7c366 Mon Sep 17 00:00:00 2001
From: Andrey Grodzovsky <andrey2805@gmail.com>
Date: Tue, 3 May 2016 22:10:59 -0400
Subject: [PATCH 074/454] ARM: adau1977-adc: Add basic machine driver for
adau1977 codec driver.
This commit adds basic support for the codec usage including: Device tree overlay,
binding I2S bus and setting I2S mode, clock source and frequency setting according
to spec.
Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com>
---
sound/soc/bcm/Kconfig | 7 ++
sound/soc/bcm/Makefile | 2 +
sound/soc/bcm/adau1977-adc.c | 125 +++++++++++++++++++++++++++++++++++
3 files changed, 134 insertions(+)
create mode 100644 sound/soc/bcm/adau1977-adc.c
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -88,3 +88,10 @@ config SND_BCM2708_SOC_RASPIDAC3
select SND_SOC_TPA6130A2
help
Say Y or M if you want to add support for RaspiDAC Rev.3x.
+
+config SND_BCM2708_SOC_ADAU1977_ADC
+ tristate "Support for ADAU1977 ADC"
+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+ select SND_SOC_ADAU1977_I2C
+ help
+ Say Y or M if you want to add support for ADAU1977 ADC.
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -9,6 +9,7 @@ snd-soc-cygnus-objs := cygnus-pcm.o cygn
obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o
# BCM2708 Machine Support
+snd-soc-adau1977-adc-objs := adau1977-adc.o
snd-soc-hifiberry-amp-objs := hifiberry_amp.o
snd-soc-hifiberry-dac-objs := hifiberry_dac.o
snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o
@@ -20,6 +21,7 @@ snd-soc-rpi-proto-objs := rpi-proto.o
snd-soc-iqaudio-dac-objs := iqaudio-dac.o
snd-soc-raspidac3-objs := raspidac3.o
+obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o
obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o
obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o
obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o
--- /dev/null
+++ b/sound/soc/bcm/adau1977-adc.c
@@ -0,0 +1,125 @@
+/*
+ * ASoC Driver for ADAU1977 ADC
+ *
+ * Author: Andrey Grodzovsky <andrey2805@gmail.com>
+ * Copyright 2016
+ *
+ * This file is based on hifibery_dac driver by Florian Meier.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+enum adau1977_clk_id {
+ ADAU1977_SYSCLK,
+};
+
+enum adau1977_sysclk_src {
+ ADAU1977_SYSCLK_SRC_MCLK,
+ ADAU1977_SYSCLK_SRC_LRCLK,
+};
+
+static int eval_adau1977_init(struct snd_soc_pcm_runtime *rtd)
+{
+ int ret;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+
+ ret = snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 0, 0);
+ if (ret < 0)
+ return ret;
+
+ return snd_soc_codec_set_sysclk(rtd->codec, ADAU1977_SYSCLK,
+ ADAU1977_SYSCLK_SRC_MCLK, 11289600, SND_SOC_CLOCK_IN);
+}
+
+static struct snd_soc_dai_link snd_rpi_adau1977_dai[] = {
+ {
+ .name = "adau1977",
+ .stream_name = "ADAU1977",
+ .cpu_dai_name = "bcm2708-i2s.0",
+ .codec_dai_name = "adau1977-hifi",
+ .platform_name = "bcm2708-i2s.0",
+ .codec_name = "adau1977.1-0011",
+ .init = eval_adau1977_init,
+ .dai_fmt = SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
+ },
+};
+
+/* audio machine driver */
+static struct snd_soc_card snd_adau1977_adc = {
+ .name = "snd_rpi_adau1977_adc",
+ .owner = THIS_MODULE,
+ .dai_link = snd_rpi_adau1977_dai,
+ .num_links = ARRAY_SIZE(snd_rpi_adau1977_dai),
+};
+
+static int snd_adau1977_adc_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ snd_adau1977_adc.dev = &pdev->dev;
+ if (pdev->dev.of_node) {
+ struct device_node *i2s_node;
+ struct snd_soc_dai_link *dai = &snd_rpi_adau1977_dai[0];
+ i2s_node = of_parse_phandle(pdev->dev.of_node,
+ "i2s-controller", 0);
+
+ if (i2s_node) {
+ dai->cpu_dai_name = NULL;
+ dai->cpu_of_node = i2s_node;
+ dai->platform_name = NULL;
+ dai->platform_of_node = i2s_node;
+ }
+ }
+
+ ret = snd_soc_register_card(&snd_adau1977_adc);
+ if (ret && ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret);
+
+ return ret;
+}
+
+static int snd_adau1977_adc_remove(struct platform_device *pdev)
+{
+ return snd_soc_unregister_card(&snd_adau1977_adc);
+}
+
+static const struct of_device_id snd_adau1977_adc_of_match[] = {
+ { .compatible = "adi,adau1977-adc", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, snd_adau1977_adc_of_match);
+
+static struct platform_driver snd_adau1977_adc_driver = {
+ .driver = {
+ .name = "snd-adau1977-adc",
+ .owner = THIS_MODULE,
+ .of_match_table = snd_adau1977_adc_of_match,
+ },
+ .probe = snd_adau1977_adc_probe,
+ .remove = snd_adau1977_adc_remove,
+};
+
+module_platform_driver(snd_adau1977_adc_driver);
+
+MODULE_AUTHOR("Andrey Grodzovsky <andrey2805@gmail.com>");
+MODULE_DESCRIPTION("ASoC Driver for ADAU1977 ADC");
+MODULE_LICENSE("GPL v2");