openwrt/target/linux/ramips/dts/mt7621_arcadyan_wg4xx223.dtsi

213 lines
3.4 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
aliases {
led-boot = &led_status_red;
led-failsafe = &led_status_red;
led-running = &led_status_green;
led-upgrade = &led_status_red;
};
leds {
compatible = "gpio-leds";
led_status_green: led-1 {
label = "green:status";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_status_red: led-2 {
label = "red:status";
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
ubi-concat {
compatible = "mtd-concat";
devices = <&ubiconcat0 &ubiconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x0 0x5240000>;
};
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x100000 0x100000>;
};
factory: partition@200000 {
compatible = "nvmem-cells";
label = "Factory";
reg = <0x200000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x4da8>;
};
/* We keep the block below to prevent eth0 MAC
* from randomization. Unique WAN, LAN, WLAN MACs
* are stored in u-boot-env.
*/
/* Default Ralink MAC (00:0c:43:28:80:xx) */
macaddr_factory_fff0: macaddr@fff0 {
reg = <0xfff0 0x6>;
};
};
partition@300000 {
label = "firmware";
reg = <0x300000 0x2000000>;
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x440000>;
};
ubiconcat0: partition@400000 {
label = "ubiconcat0";
reg = <0x440000 0x1bc0000>;
};
};
partition@2300000 {
label = "Firmware2";
reg = <0x2300000 0x2000000>;
read-only;
};
partition@4300000 {
label = "glbcfg";
reg = <0x4300000 0x200000>;
read-only;
};
partition@4500000 {
label = "board_data";
reg = <0x4500000 0x100000>;
read-only;
};
partition@4600000 {
label = "glbcfg2";
reg = <0x4600000 0x200000>;
read-only;
};
partition@4800000 {
label = "board_data2";
reg = <0x4800000 0x100000>;
read-only;
};
ubiconcat1: partition@4900000 {
label = "ubiconcat1";
reg = <0x4900000 0x3680000>;
};
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_fff0>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
nvmem-cells = <&macaddr_factory_fff0>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy4: ethernet-phy@4 {
reg = <4>;
};
};
&switch0 {
ports {
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan1";
};
};
};
&state_default {
gpio {
groups = "i2c", "jtag";
function = "gpio";
};
};