ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
f5919b65d4
openwrt/target/linux/brcm2708/patches-4.14/950-0348-overlays-Add-addr-parameter-to-i2c-rtc-gpio.patch

112 lines
3.5 KiB
Diff
Raw Normal View History

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
From 454ca715ff9f88c4e02ac892f196da8a1d90d052 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 9 Jul 2018 21:11:32 +0100
Subject: [PATCH 348/454] overlays: Add addr parameter to i2c-rtc (& -gpio)
See: https://github.com/raspberrypi/linux/issues/2611
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
arch/arm/boot/dts/overlays/README | 10 +++++++
.../dts/overlays/i2c-rtc-gpio-overlay.dts | 28 +++++++++++++++++++
.../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 11 ++++++++
3 files changed, 49 insertions(+)
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -826,6 +826,10 @@ Params: abx80x Select o
pcf8563 Select the PCF8563 device
+ addr Sets the address for the RTC. Note that the
+ device must be configured to use the specified
+ address.
+
trickle-diode-type Diode type for trickle charge - "standard" or
"schottky" (ABx80x only)
@@ -850,6 +854,8 @@ Params: abx80x Select o
ds3231 Select the DS3231 device
+ m41t62 Select the M41T62 device
+
mcp7940x Select the MCP7940x device
mcp7941x Select the MCP7941x device
@@ -860,6 +866,10 @@ Params: abx80x Select o
pcf8563 Select the PCF8563 device
+ addr Sets the address for the RTC. Note that the
+ device must be configured to use the specified
+ address.
+
trickle-diode-type Diode type for trickle charge - "standard" or
"schottky" (ABx80x only)
--- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts
@@ -159,6 +159,21 @@
};
};
+ fragment@10 {
+ target = <&i2c_arm>;
+ __dormant__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ m41t62: m41t62@68 {
+ compatible = "st,m41t62";
+ reg = <0x68>;
+ status = "okay";
+ };
+ };
+ };
+
__overrides__ {
abx80x = <0>,"+1";
ds1307 = <0>,"+2";
@@ -169,6 +184,19 @@
pcf2127 = <0>,"+7";
pcf8523 = <0>,"+8";
pcf8563 = <0>,"+9";
+ m41t62 = <0>,"+10";
+
+ addr = <&abx80x>, "reg:0",
+ <&ds1307>, "reg:0",
+ <&ds1339>, "reg:0",
+ <&ds3231>, "reg:0",
+ <&mcp7940x>, "reg:0",
+ <&mcp7941x>, "reg:0",
+ <&pcf2127>, "reg:0",
+ <&pcf8523>, "reg:0",
+ <&pcf8563>, "reg:0",
+ <&m41t62>, "reg:0";
+
trickle-diode-type = <&abx80x>,"abracon,tc-diode";
trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0",
<&abx80x>,"abracon,tc-resistor";
--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
@@ -169,6 +169,17 @@
pcf8523 = <0>,"+7";
pcf8563 = <0>,"+8";
m41t62 = <0>,"+9";
+
+ addr = <&abx80x>, "reg:0",
+ <&ds1307>, "reg:0",
+ <&ds1339>, "reg:0",
+ <&ds3231>, "reg:0",
+ <&mcp7940x>, "reg:0",
+ <&mcp7941x>, "reg:0",
+ <&pcf2127>, "reg:0",
+ <&pcf8523>, "reg:0",
+ <&pcf8563>, "reg:0",
+ <&m41t62>, "reg:0";
trickle-diode-type = <&abx80x>,"abracon,tc-diode";
trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0",
<&abx80x>,"abracon,tc-resistor";
Reference in New Issue Copy Permalink